Search results: qi2

Sort order

61 models

Samsung Galaxy Z Fold 7/8 Ultra Qi2/Magsafe Charging Stand

Samsung Galaxy Z Fold 7/8 Ultra Wireless Charging Dock UPDATED - Fits the Galaxy Z Fold 8 Ultra also. I love my Samsung Galaxy Z Fold 7, but I couldn't find a nice charging dock that would allow me to charge my phone in the “unfolded”…

Downloads
785
Likes
86
Rating
4.75
P
Printablesreichi

Anker Zolo Qi2 Phone Stand

A very simple Stand for an Anker Zolo Qi2 wireless charging pad with a simple frichtion/press fit. Just push in the pad from behind it then ever-so slighty sticks out so the phone does not rub against the stand. I'm using this with a…

Downloads
274
Likes
15
Rating
5
P
PrintablesGreg LFT

Pixelsnap stand for Pixelsnap Qi2 wireless charger and other 56mm diameter charger

Stand for Pixelsnap Qi2 wireless charger and other 56mm diameter charger. Work well with Google Pixel 10 serie and magnetic wireless charging phones. Printed on front face, no support needed. PLA 100% infill.

Downloads
157
Likes
7
Rating
5
P
PrintablesJosh Edlin

NIU KQi2 Pro Scooter Cup Holder

Specifically designed around a Yeti Rambler can koozie and the NIU KQi2 Pro scooter. Replaces one of the reflectors and uses its M4 bolt holes. You need the following hardware: 2x M4x12 bolts 2x M4 Washers Probably best to print it in…

Downloads
122
Likes
12
Rating
0
P
PrintablesShawn Betts

Pixel 10 Anker Qi2 Charging Stand

I wanted a stand that could hold my phone by the anker Qi2 charging pad but also I wanted to be able to pick up the phone with the charger still on it. It also works with the thinner anker magsafe charging pad I have so it may work with…

Downloads
117
Likes
20
Rating
0
P
PrintablesSeanTRG

Anker Zolo Qi2 Wireless Charger Stand

FOR ANDROID PHONES, A MAGSAFE CASE IS REQUIRED. Can fit up to a Samsung Galaxy S24 Ultra. The phone shown in the pictures is a Samsung Galaxy S25. The pictures I took of the stand when printed did not have the rounded corners shown in the…

Downloads
114
Likes
10
Rating
0
P
PrintablesRushman

Anker Maggo Qi2 charger holder A25M0 (makes it flat)

I needed this charger to sit flat so I could fasten it with VHB in my car. The holes on the side probably allow some cooling to happen, they are primarily there to allow you to pop the charger back out of the holder.

Downloads
102
Likes
13
Rating
0
P
PrintablesBrett Vance

PixelSnap Qi2 Charger Stand

Holds the Google PixelSnap Qi2 Charger. In vertical it keeps a Pixel 10 Pro just off the surface. Prints well at 20% infill with supports.

Downloads
72
Likes
6
Rating
0
P
PrintablesGullwingdmc

Mustang Mach-E MagSafe (Qi2) Charging Mat

I was tired of the slow and unreliable charging from the built in wireless charging pad and I didn't like the alternatives out there, so I decided to make my own. Required Hardware: Apple MagSafe Charging Puck (Gen 1) 1m…

Downloads
68
Likes
6
Rating
5
P
PrintablesJin Yutao

Grocries Hook for Niu Scooter kqi2 / kqi3

To address the stupid issue that Niu Scooter does not have any hook to hang your bag Print Settings Rafts: No Supports: No **Resolution:** 0.2-0.3 Infill: 20% **Filament:** Whatever PLA/PETG whatever Notes: Use 4 loop perimeters if you…

Downloads
66
Likes
4
Rating
5
P
PrintablesHoodSpider

BRZ/GR86 ESR Brand Qi2 ball joint arm adapter phone mount

This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433) Im not sure if this adapter will…

Downloads
65
Likes
11
Rating
0
P
Printablesdotvav

Qi2 Wireless Charging Phone Stand

Qi2 Wireless Charging Phone Stand Tired of your phone lying flat while it charges? This 3D printable stand is designed to perfectly house a Qi2 charging puck, transforming it into a convenient, upright charging station for your desk or…

Downloads
54
Likes
4
Rating
0
P
PrintablesMattArmfieldSTL

Galaxy Fold 7 QI2/Magsafe stand for SupCase Case with Kickstand

UPDATE: 8/21/2025 I added more space to the front of the lip to give it more room when charging with the Fold7 open. The phone sits better in the frame now. V2 is in the download files. Original Posting. First of all, I am not a graphic…

Downloads
43
Likes
10
Rating
0
P
PrintablesRawkish

Phone Charger Sliding Mount - Anker MagGo Qi2

Print two slider mounts and one charger holder. Snap the mounts onto the main part of the charger holder, with the flat side towards the mounting surface. Put the charger in (plug first through the slot), and it should be a friction fit.…

Downloads
41
Likes
3
Rating
0
P
PrintablesDaafip

Qi2 Wireless Charger Anker Zolo Ford Focus MK2

This is a remix of the anker zolo stand https://makerworld.com/en/models/1822218-anker-zolo-magnetic-charger-stand-qi-2-magsafe#profileId-1945131 and https://www.printables.com/model/619781-usb-from-ford-focus-mk2 into a phone holder for…

Downloads
41
Likes
4
Rating
0
P
PrintablesAntonio Ibarra

magsafe / qi2 and Samsung watch charging stand

its a charging dock for the Samsung watch charger and an apple magsafe charger

Downloads
40
Likes
7
Rating
0
P
PrintablesRJFlames

E210/2019+ Corolla MagSafe/Qi2 Mount

A MagSafe/Qi2 mount that replaces the OEM rubber wireless charger pad in the E210/2019+ Corolla with the Premium Package ( 861C0-12011 ). Not designed for the standard package with the storage bin ( 58839-12090-C0 ). From my testing, the…

Downloads
36
Likes
6
Rating
0
P
Printablesgrosi

Voron-Style Qi2 Magnetic Charging Stand (Pixel 10 Pro)

Voron-Style Qi2 Magnetic Charging Stand (Pixel 10 Pro) Inspired by the industrial, functional design language of Voron 3D printers, I designed this desktop stand to take advantage of the new Qi2 wireless charging standard. I created this…

Downloads
33
Likes
5
Rating
5
P
PrintablesMeuon

PixelSnap / Qi2 / Magsafe Wireless Charger 25mm ball mount

Magsnafe / Qi2 / Pixelsnap charger base for RAM 25mm ball mounts in my trucks using the Google Pixelsnap charger puck. Holds phone at the bottom just enough for helping on off/bad roads and makes attaching very easy, no futzing around…

Downloads
32
Likes
5
Rating
0
P
Printablesjonootto

Tesla Model 3 (2019) Qi2 Magsafe charging plate

Fits momax qi charger Tested with iPhone 15 pro max

Downloads
31
Likes
3
Rating
0
P
PrintablesDamian

Action Sitecom Qi2 wireless charger adapter

Action Sitecom Qi2 wireless charger adapter for Industrial Phone Stand by @Josh3d

Downloads
29
Likes
6
Rating
0

BMW IX - Phone Mount for ESR mini qi2 charger

BMW IX phone mount. Fits ESR mini qi2 charger. Hole is 58.9mm and 7.5mm deep. Uploded step file so should be easy to mod for other chargers.

Downloads
26
Likes
2
Rating
0
P
Printablesdonovan612

TORRAS PolarCircle Qi2 Mag-Safe Charger Mount

TORRAS PolarCircle Qi2 Mag-Safe Charger Mount I have a Samsung Galaxy S23 and have about ½" clearance at the bottom of the phone when mounted. May not fit larger phones. Fusion 360 file included if you want to tweak the dims. Base is…

Downloads
25
Likes
4
Rating
0
P
PrintablesOriginalOrig

[v2] OnePlus 10 Pro Case /w Qi2/MagSafe Attachment

Created to balance stiffness of case, improve hand feel of buttons, and keep screen coverage minimal. OnePlus 10 Pro case with cutout for Qi2/MagSafe ring or magnet array. Printable with rigid and flexible materials.

Downloads
24
Likes
1
Rating
0
P
PrintablesThe_Dirty_Carl

Anker MagGo A25MO Qi2 Stand

A simple stand designed to hold an induction charger. I wanted one that could be secured to my nightstand. The cabling is routed through both parts and exits through the bottom of the “clamp”. The “clamp” isn't a clamp, it's rigid with a…

Downloads
20
Likes
3
Rating
0
P
PrintablesSveinHa

Various phone holders for Linocell Magsafe Qi2 charger.

All parts is based around the Linocell Magsafe wireless Qi2 charger. Naturally, it is based on my own phones and use but it may also be a base for other peoples use. Currently supported: Google Pixel 7 Pro Google Pixel 8 Pro (the 8 Pro…

Downloads
18
Likes
3
Rating
0
P
PrintablesDavid Larson

F150 ESR Phone Mount Qi2

This is a phone mount for an F150. It fits in the space in front of the console shifter. This is designed to fit the ESR Cryoboost Qi2 Phone Charger. It will also physically block the button to stow the shifter. This was remixed from a…

Downloads
17
Likes
4
Rating
0

IKEA SKADIS Magsafe/Pixel snap qi2 charger (No Supports)

This model lets you mount your phone (via magsafe) on you Skadis so you can watch DIY craft videos and follow along, watch a movie while supervising you 3D Print (so you can pause the print and insert magnets), or just charge your phone…

Downloads
17
Likes
10
Rating
5
P
PrintablesCTJInVA

2024 Replacement Charging Block for Qi2 Wireless Charging Pad compatible with Honda Ridgeline 2024 - 2026

2024 Replacement Charging Block compatible with Honda Ridgeline 2024 - 2026. I got tired of the anemic OEM part that would heat up my iphone 14 and would barely charge it. The OEM would allow the phone to slide around and positioning it…

Downloads
16
Likes
7
Rating
0

Sitecom QI2 wireless charger stand

Although it is not a remix, the idea for this design is, somewhat, inspired by this model. This stand will fit the Sitecom QI2 wireless charger puck as sold by the Action stores ( in NL). It can be printed without supports. The example in…

Downloads
16
Likes
3
Rating
0
P
PrintablesRod Gregg

Pixel 10 Phone Stand that holds Belkin Magnetic Wireless Charging Pad Qi2 15W w/Kickstand

Face plate slides together holding Belkin pad in place. The stand is made to stand straight up or at an angle. No glue required. https://www.amazon.com/dp/B0F8LMHB64?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Downloads
14
Likes
3
Rating
0
P
Printablestanelv

BMW iX3 Threekey Qi2 Charger adapter

Charger https://www.amazon.de/-/en/dp/B0GYS895L4 Cable https://www.amazon.de/-/en/dp/B0FL82DWSJ Use Tesa 9x0,2mm tape on 3 of the ribs and feet of the charger

Downloads
12
Likes
2
Rating
0
P
PrintablesJoseSelekcjoner

Baseus Simple Mini4 Air Magnetic Wireless Charger Qi2 15W Stand

Simple Stand for Baseus Simple Mini4 Air Magnetic Charger This is a custom stand designed specifically for the Baseus Simple Mini4 Air. Important Note: I highly recommend printing this with heat-resistant filament (such as PETG, ASA, or…

Downloads
11
Likes
0
Rating
0
P
Printables20100

Customisable and Qi2 compatible Pixel 10 case

This is a customizable pixel 10/10 pro case. To customize the case (bambu studio) : - Download the "Customisable sheet.stl" file - Import to your CAD software - Create a sketch and extrude by 0,01mm to be detected by your slicer Then,…

Downloads
10
Likes
1
Rating
0
P
PrintablesDenny

Anker Zolo Qi2 Charger Wall Mount

I designed this phone mount so I can charge my phone over night and use its Always-On display as a bedside clock. It fits the Anker Zolo Qi2 charging pad: https://amzn.eu/d/05fnNduC The phone can be mounted in landscape or, in case it is…

Downloads
10
Likes
0
Rating
0
P
PrintablesKatrine

Light blocker for "UGREEN 2-in-1 Qi2 Magnetic Foldable Charging Station"

I have this fairly cheap and pretty decent “UGREEN 2-in-1 Qi2 Magnetic Foldable Charging Station” - but I use it on my nightstand and the led charge indicator is INSANE when using the airpod charger… It lights up the entire room at night.…

Downloads
9
Likes
0
Rating
0
P
Printablesdeckdoy

apple watch and anker qi2 wireless stand

Needed a more compact Iwatch charger stand and a Iphone stand that uses the anker qi2 wireless charge. Wires are underneath the base. No supports needed.

Downloads
8
Likes
0
Rating
0
P
PrintablesC3D Garage

SnapStand for Qi2 puck

Introducing the SnapStand for Qi2 charging (left in pics) similar to Google's PixelSnap Stand for a fraction of the price. It's also compatible with non-Qi2 phones (that don't have magnets). The throwback design to the original Pixel…

Downloads
8
Likes
0
Rating
0
P
Printableseclyptox

Magnetic Phone Stand for MagSafe and Pixelsnap — Qi2 Desk Holder, 4 or 6 Magnets, No Supports

A magnetic phone stand that grows out of its own base. Most MagSafe stands are a ring stuck on an arm stuck on a plate. This one is a single continuous surface: the ring is not glued onto the body, it is born from it. There is not one…

Downloads
8
Likes
4
Rating
0
P
PrintablesMartin

Samsung Qi2 Single Mag Wireless Charger Holder

This mount slides onto a small shelving unit to hold the new Samsung Qi2 magnetic wireless charger . It has built-in cable routing to hide the charger’s wiring and route it to the rear of the unit, allowing for convenient bedside…

Downloads
7
Likes
0
Rating
0
P
PrintablesOnlyPaul
Downloads
7
Likes
0
Rating
0
P
Printableskandrejevs

Qi2 MagSafe Car Mount – Snap-Fit Holder for Baseus 60.5x11mm Puck

Baseus Qi2 MagSafe Car Mount – 1/4"-20 Snap-Fit Holder Simple and solid snap-fit holder for the Baseus Qi2 / MagSafe charger (60.5mm × 11mm) . Designed to mount to standard 1/4"-20 arms (Ulanzi, SmallRig, suction mounts, etc.) using a…

Downloads
7
Likes
0
Rating
0
P
PrintablesTimo Pop

UniMount Qi2

First of all, for commercial reasons this can NOT be called Magsafe , being trademarked by Apple, we go by the name Qi2 , published by the WPC. I choosed to make phone hardware because 90% of people here dont actually have a professional…

Downloads
6
Likes
12
Rating
0
P
Printablesbogdankecman

TORRAS cooling Qi2 charger holder

TORRAS charger have the ring on the back so you can put your hand on the desk and angle it with that ring but on the cluttered desk I am always searching where the charger is so decided to make a holder similar to ones for magsafe. TORRAS…

Downloads
5
Likes
1
Rating
0
P
Printablesunderegineered

manfrotto smartphone magsave /qi2 adapter

you need to add a magentic plate after the print i used this one https://www.amazon.de/dp/B093PL1CD8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 and added it with high strength double sided tape. i used onshape therefore it's needs to be…

Downloads
4
Likes
1
Rating
0
P
Printablesdontera

Wireless Charging Puck Adapter for Adjustable Phone Stand Qi2/Magsafe

This adapter converts the original non-charging phone holder on the linked adjustable desktop stand into a Qi2 magnetic charging mount. The printed cup holds a standard Qi2 charging puck and includes a cable cutout. It attaches to the…

Downloads
4
Likes
3
Rating
0
P
Printablesshadow

Adjustable-Grip Phone Stand for Round MagSafe-Compatible & Qi2 Charger Pucks (54-62.5 mm)

A 3-part phone stand (head, jaw, foot) that holds the round magnetic wireless-charger puck you already own and presents the phone in landscape at a 20° tilt, for a desk or nightstand (for example iPhone StandBy mode). Instead of a fixed…

Downloads
4
Likes
4
Rating
0
P
PrintablesUkko Olkku

Pixel 8 and watch 2/3 stand (allows horizontal placement without qi2)

This is a remix that allows you to place the phone horizontally and allows use without qi2/magnets. ALL CREDITS GO TO THE ORIGINAL CREATOR.

Downloads
3
Likes
0
Rating
0
P
PrintablesZemoj

Charger Stand for Belkin Qi2 15W

Basic charger stand for the Belkin Qi2 wireless charging puck. "Base" and "Main" are printed separately so you can customize the size and weight you need. I printed the 60mm version with 15% infill and 0.2mm layers. Measure from the…

Downloads
3
Likes
1
Rating
0
P
PrintablesPavlo Nahornyi

Samsung S26 Qi2 wireless charger desk clamp

Custom 3D-printable desk mount engineered specifically for thin 12mm desktops and Qi2 / MagSafe wireless chargers . Designed to hold a Samsung S26 securely in both portrait (vertical) and landscape (horizontal) orientations for hands-free…

Downloads
2
Likes
0
Rating
0
P
PrintablesBlackegg13

QI2 magsafe charger compatible with Honda Civic 10 gen

Replacement wireless charger for the lacklustre oem one. I have model it around low cost qi2 charger from amazon that has magsafe. To make sure that phone sits flat there are two indents to accommodate camera lenses. I have design all the…

Downloads
0
Likes
0
Rating
0
P
Printables

MagSafe/Qi2 Mount for US VW ID.4 (2023-2026)

Improve your wireless phone charging experience in your US 2023-2026 VW ID.4! Features Improves charging efficiency and reduces heat thanks to magnets perfectly aline your MagSafe or Qi2 compatible phone with the wireless charging coil.…

P
Printables

BRZ/GR86 ESR Brand Qi2 ball joint arm adapter phone mount

This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433) Im not sure if this adapter will…

P
Printables

magsafe / qi2 and Samsung watch charging stand

its a charging dock for the Samsung watch charger and an apple magsafe charger

P
Printables

manfrotto smartphone magsave /qi2 adapter

you need to add a magentic plate after the print i used this one https://www.amazon.de/dp/B093PL1CD8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 and added it with high strength double sided tape. i used onshape therefore it's needs to be…

P
Printables

apple watch and anker qi2 wireless stand

Needed a more compact Iwatch charger stand and a Iphone stand that uses the anker qi2 wireless charge. Wires are underneath the base. No supports needed.

P
Printables

Action Sitecom Qi2 wireless charger adapter

Action Sitecom Qi2 wireless charger adapter for Industrial Phone Stand by @Josh3d

P
Printables

TORRAS cooling Qi2 charger holder

TORRAS charger have the ring on the back so you can put your hand on the desk and angle it with that ring but on the cluttered desk I am always searching where the charger is so decided to make a holder similar to ones for magsafe. TORRAS…

P
Printables

Customisable and Qi2 compatible Pixel 10 case

This is a customizable pixel 10/10 pro case. To customize the case (bambu studio) : - Download the "Customisable sheet.stl" file - Import to your CAD software - Create a sketch and extrude by 0,01mm to be detected by your slicer Then,…

P
Printableskrayft

MagSafe/Qi2 Mount for US VW ID.4 (2023-2026)

Improve your wireless phone charging experience in your US 2023-2026 VW ID.4! Features Improves charging efficiency and reduces heat thanks to magnets perfectly aline your MagSafe or Qi2 compatible phone with the wireless charging coil.…

Likes
6
Rating
5

Samsung Galaxy Z Fold 7/8 Ultra Qi2/Magsafe Charging Stand

Samsung Galaxy Z Fold 7/8 Ultra Wireless Charging Dock Don't have a printer? You can get one at my store ( Link ) What's different in the paid version? Weighted version: I added embedded weights to the design. The print will pause, and…

Likes
9
Rating
0