Search results: quadcopter

Sort order

208 models

P
Printableszuim

Fully printed Quadcopter/Drone Frame for 9" propellers

This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
636
Likes
123
Rating
5
P
PrintablesSTRIKING FPV

V3 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…

Downloads
6,800
Likes
513
Rating
4.55
P
PrintablesSTRIKING FPV

V2 Bi-Loop or Bi-Blade Toroidal Propellers for FPV Drone Quadcopter

This is my second generation bi-loop or bi-blade design which, is much more like what the MIT boys pumped out, featuring a more teardrop-y kinda' shape. Much like V3 of my tri-loop design, these ones again follow a more traditional…

Downloads
2,790
Likes
193
Rating
4.6
P
PrintablesSTRIKING FPV

V2 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…

Downloads
1,270
Likes
97
Rating
0
P
PrintablesSTRIKING FPV

V1 Bi-Loop or Bi-Blade Toroidal Propellers for FPV Drone Quadcopter

Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone community to have a go and see how they like…

Downloads
1,160
Likes
108
Rating
5
P
PrintablesMehmetemin
Downloads
712
Likes
20
Rating
0

Print-in-Place Quadcopter Toy - No Supports

Prints with no supports, if yours is fused too hard to break loose, try the extra tolerance version. 4 rotors spin, arms do not pivot. Depending on your settings, you might have to POP them loose the first time. Also available: Original…

Downloads
568
Likes
99
Rating
5
P
PrintablesQuicksilver

Prop guard for 5 inch CineWHOOP Quadcopter

Prop guard for your 5 inch :) Holes on the sides, if you want to add rigidity by printing connecting rods. Mirror to get the other side. Some frames have the motor mount holes angled relative to the frame, if so let me know. Category: R/C…

Downloads
540
Likes
23
Rating
5
P
PrintablesSTRIKING FPV

V1 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

IGNORE this version, we're onto V3 already! These have since been superseded by my second generation design , but for posterity I'm uploading it here so we can see how terrible they are compared to the newer ones. Also, here's the first…

Downloads
328
Likes
39
Rating
0
P
PrintablesBananas on Mars

AlfaRC Apex 2" FPV quadcopter frame printed accessories

Printed with 0.4mm Nozzle and 95 A Shore TPU, 0.15mm layer height. Camera mount allows for 4 different mounting positions depending on hole used and orientation, which is a millimeter more to the front or to the back compared with the TPU…

Downloads
310
Likes
25
Rating
5
P
PrintablesETFPV

Bi+Tri-Blade Toroidal Propellers for FPV Drone Quadcopter (5mm T-mount)

Fixed 5mm height instead of 6mm and T-mount for bi-blade. Originals by STRIKING FPV

Downloads
303
Likes
20
Rating
5
P
Printablespimda

Low Poly Drone / Low Poly Quadcopter

Some low poly drones, I've included editable blend files with the mirror still enabled (blender3.6) feel free to modify them. Of course stl files are also included.

Downloads
269
Likes
11
Rating
0
P
Printablesemeremnd

Quadcopter UAV (Drone)

Quad-X Drone: Versatile Quadcopter for Racing, Surveillance, and More The Quad-X Drone is a multi-functional quadcopter designed for speed, stability, and versatility. Whether you’re racing, capturing aerial footage, conducting…

Downloads
264
Likes
43
Rating
0
P
PrintablesDiogorsergio

Sayha - X FPV Quadcopter 4" 5" 6"

UPDATE February 05, 2017 Minor fixes in the STL's. UPDATE November 12, 2016 All frames have been update with improved propeller clearances. (5mm Increase). Enjoy! https://www.youtube.com/watch?v=zlCR2uV0GjE (Video from deDrones) Thanks…

Downloads
260
Likes
44
Rating
0
P
Printablesyoyo.rrrrr

chassie drone quadcopter

un chassie relativement simple a réaliser mais plutôt efficace! ci vous avez des question, posé les moi dans les commentaires.

Downloads
243
Likes
13
Rating
0
P
PrintablesoXiVanisher

Grappling hook (to rescue quadcopters from trees)

I designed this to rescue quadcopters / multicopters from trees. You will have to make it heavier somehow so that it flies better. The V2 (green in the pictures) has holes in the front where M5 screws and nuts can be used to make it more…

Downloads
216
Likes
35
Rating
5
P
Printableskevinstonehouse

Simplex V2 Quadcopter

Originally I wanted a Quad design that would fit nicely on my newly assembled Prusa-Mini. (Love it) However most of what I saw was really uninspiring, not particularly durable, and far too heavy. Thus I set out with the following design…

Downloads
212
Likes
110
Rating
0
P
Printablesozan

Quadcopter frame (drone w/ 4 motor)

Its just drone frame with legs. I printed this on 30 x 30 cm table soo it can't fit your table. Make sure that fit.

Downloads
205
Likes
21
Rating
0
P
PrintablesQwermMakes

Mark4 5" Quadcopter Frame - Side Plates

Protective side plates for the GEPRC/Clone Mark4 5 inch quadcopter frame. Comes in two different sizes to accommodate ESC wiring, blank side and USB port versions, and versions that have extra room at the rear to accommodate wiring…

Downloads
195
Likes
12
Rating
0
P
Printablesmotivecodex

Foldable Drone Quadcopter v1

This design is my prototype to foldable drone for my DJI Naza V2. Foldable Drone V2 is under development. It has minor design flaws which I will fix in V2, but for now it's printing pretty nice and the drone looks cool. Folded without…

Downloads
191
Likes
32
Rating
0
P
Printablespex

PEX96 - Micro FPV quadcopter brushless 96mm frame

Hello folks I was looking for a caged frame under 100mm for interior/exterior FPV and could not find one, so I designed my own. This frame is designed for 20x20mm FC and ESC mount and for 19/2035 propellers, this is a 96mm class frame…

Downloads
190
Likes
24
Rating
0
P
PrintablesQwermMakes

Mark4 5" Quadcopter Frame - TPU Feet

Cushioned TPU feet for the GEPRC/Clone Mark4 5 inch quadcopter frame. Comes in a variety of sizes and can be slipped on and holds itself in place, but I recommend using a small ziptie to prevent it from getting knocked off during crashes.…

Downloads
184
Likes
7
Rating
0
P
PrintablesLazerlord

Landing Gear for SK450 Quadcopter Frame (Standard, Long, and Longer)

Never drag your payload again! This set of 3D models are a direct fit for the original landing gear that come with the SK450 from Hobbyking (or elsewhere). They use the same mounting system as the originals, so they require the use of the…

Downloads
176
Likes
3
Rating
0
P
PrintablesVince_Prints

5 inch Quadcopter

As the name suggests, this is a 3D printed quadcopter. I am assuming you have some experience of building a RC machines if you are attempting to print this, so this will not be an inclusive tutorial. Printer Parts You Need: Antenna Mount…

Downloads
167
Likes
21
Rating
0
P
PrintablesL3M4R

Abyss34 - 3"/4" 3D printed quadcopter frame

Frame inspired by TBS Oblivion and Dave_C_FPV "The Micro Oblivion II" The main reason to create frame with support for wider stack mount types and a bit stronger. General notes 3 and 4 inches propellers support for stack 16x16, 20x20 and…

Downloads
165
Likes
11
Rating
0
P
PrintablesMachvolum

F450 type quadcopter top with APM Dampener Mount and taller arms

I liked the design, but the mount for the apm was a little flimsy and a little small. So I took two items and mated them together. I also made the top plate 3mm instead of the original 2mm to add additional strength. There is also a file…

Downloads
162
Likes
13
Rating
0
P
Printablesledrone.club

Mango : 2" & 2.5" Ultralight FPV Quadcopter Frame

Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Disclaimer : This frame was designed at the beginning of 2020 and files migrated…

Downloads
157
Likes
20
Rating
0
P
PrintablesMazaaFIN

X550 Quadcopter

UPDATE 28.6.2016: I've been busy last few months, hope to find time for this hobby and to finalize this project page Motor mount holes are rotated 90° in ARM_ALT.STL X550 is a Work-In-Progress - here's my To-Do list: upload some video…

Downloads
143
Likes
15
Rating
0
P
PrintablesZi-vo

Project Ikarus - Quadcopter

Disclaimer: this is only a first look into this project, we´re midway through the developement. We decided to publish in such a early stage to collect as much feedback as we can. Speaking of me, the publisher, this is the first bigger…

Downloads
140
Likes
21
Rating
0
P
Printablesvgroove

F450 Quadcopter Mounting Brackets

This collection comes with a base plate that mounts to screw holes on the top of the F450 frame. Additional plates can then be stacked using common m3 spacers as seen in the photos. I use m2.5 thermal inserts for all screw attachments. -…

Downloads
136
Likes
14
Rating
0
P
PrintablesRaptor_50_Titan

Quadcopter Wall mount

This is a remix of JAM3ZS Quad wall mount. This remix removes the screw holes for those that would like to use command strips in place of screws.

Downloads
132
Likes
24
Rating
5
P
PrintablesMarek Metelski

Brushed quadcopter frame

Basic frame for brushed DC motor (7mm) quadcopter with 30.5x30.5mm controller. holes supporting M2,5 screws. Frame consists of a base frame to mount the motors and controller and an extra mount for battery & accessories. Use appropriate…

Downloads
131
Likes
4
Rating
5
P
PrintablesIainY

Wall mount for Quadcopter/Drone/Transmitter

Wall mount for quadcopters/drones. Suitable for most 3"-5" frames and even a transmitter. The transmitter one is slightly narrower for a Taranis but would probably fit most models. OpenSCAD files included so you can modify it to suit your…

Downloads
130
Likes
9
Rating
4.5
P
Printablesssombra

Quadcopter wall / Skadis mount

I like dudufreeride wall mount (https://www.thingiverse.com/thing:4342345) for displaying quads on the wall, but I wanted to adapt it for using it with the Ikea Skadis pegboard system, so I took the original design as a base, removing the…

Downloads
124
Likes
22
Rating
4.75
P
Printablesleviu

Toy Quadcopter / Drone - Dual Prop

Thanks to pefozzy for the base model! The props have been changed to dual prop - same internal hole diameter as the original so the pins can bit fit and glued in the same manner. The image shows glow in the dark props (kids found it fun).…

Downloads
119
Likes
12
Rating
0
P
Printablesnroyer

Down Range - Generic Quadcopter

This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This is a generic quadcopter model intended to…

Downloads
118
Likes
10
Rating
0
P
PrintablesBacon2002

TinyTank drone racing quadcopter - 4S 3" Micro cam & HDZero versions

"TinyTank" This is a prototype monocoque 4S 3 inch racing / freestyle quadcopter design with all the components (FC, VTX, wires, battery etc.) fitted internally. Hardware - M2 countersunk bolts (x4) & M2 nylon nuts (x4) The FC and VTX are…

Downloads
116
Likes
21
Rating
0
P
PrintablesQwermMakes

Mark4 5" Quadcopter Frame - Rear Antenna Mount

Rear antenna mount for the GEPRC/Clone Mark4 5 inch quadcopter frame. Accommodates a SMA connector, 25mm GPS antenna/module, and RX antenna(s). There are two versions, one with a single RX antenna, and one for 2x diversity RX antennas.…

Downloads
112
Likes
5
Rating
0
P
PrintablesRozcy

A very long 10 inch fpv quadcopter drone leg

A very long 10 inch fpv quadcopter drone leg.

Downloads
110
Likes
3
Rating
0
P
PrintablesMake'n'Modify

Vibration Dampener Mold for Quadcopters (2 sizes)

This is a mold for vibration dampeners. Get some molding silicone an pure some dampeners ;) Here I made a video where I show you how I did some for my miniquad. Have Fun ;) Instructions Choose wich size you want and print 2 mid pices and…

Downloads
109
Likes
36
Rating
5
P
PrintablesPlastiBots

Dual 5mm LED Holder - Quadcopter

You can use this to hold 2 LED's and mount it on your quad. Low profile and light. More cool stuff @ http://www.plastibots.com This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/aYbwqSqHA3W Category: 3D…

Downloads
107
Likes
15
Rating
5
P
PrintablesL3M4R

CinePunk3 r2 - printed Cinematic quadcopter frame

CinePUNK 3 (inch) modular cinematic quadcopter frame space for second stack (fpv camera board) easy to repair/print by modularity, limited supports used 16 x M2 screws for assembling (no other parts required to fly this) USB plug…

Downloads
104
Likes
10
Rating
0
P
Printableszuim

5" Propeller for quadcopters (2/3 blades)

Information: This is an experimental propeller design for 5 inch quadcopters. I have successfully tested it, printed from PETG, but would not recommend it as replacement for regular propellers. These are a lot louder, more fragile and…

Downloads
97
Likes
3
Rating
0
P
PrintablesHenningS

Foldable Nano Quadcopter FNQ220 Version 2

Version 2 of my FNQ220 (Foldable Nano Quadrocopter) After 3 years of field testing and several own builds with different configurations, this is the V2 (file version V.39) with a lot of features, bugfixes and improvements compared to the…

Downloads
97
Likes
12
Rating
0
P
Printablescwlewis11

Quadcopter Drone Benchy

Benchy as a quadcopter drone with spinning blades. It is a little shorter and wider than the standard Benchy. No supports required when printing. Two versions available (.stl & .3mf files available.) Quadcopter Drone Benchy. (One-piece…

Downloads
91
Likes
44
Rating
5
P
Printablespatshead

PH145 Brushless FPV Quadcopter

The PH145 quadcopter was inspired by the RS90 and DJ105 brushless quadcopters. The RS90 looked like fun, but the DJ105 wasn't much bigger and produces a lot more thrust. The DJ105 uses 2.5 inch propellers, and I quickly learned that these…

Downloads
89
Likes
11
Rating
0
P
PrintablesOshawaAbe

Quadcopter prop puller - triblade

Metal fork propeller pullers are difficult to use and results in the risk of broken or bent quadcopter components. This 3D print requires user to pull along the axis of the motor shaft, so no bending occurs. Device is pressed until hooks…

Downloads
88
Likes
14
Rating
0
P

Maginon Quadcopter Drone QC-710SE Motor Cover

You can print this model if you own a Maginon QC-710SE WiFi and need a replacement motor cover for your drone. I suggest using any clear filament so that the printed part won't block the LEDs from the drone. Do you like my models?…

Downloads
88
Likes
14
Rating
5
P
Printableshvrkh

Dron, Quadcopter, just body

I'm giving you a base parts of my very first complex quadcopter model. It really works. The main advantage is the cover of the propellers. Feel free to use this model and remix it. Just remember to licence settings.

Downloads
88
Likes
7
Rating
0
P
Printables0xkryo

S500 Quadcopter Top Plate with Vibration Isolation and Raspberry Pi

This model is a replacement for the stock top plate that comes with the s500 frame kit. It includes vibration isolation for an autopilot / flight controller board and provisions to mount a raspberry pi companion / flight computer for…

Downloads
84
Likes
3
Rating
0
P
Printablespatshead

Customizable Micro Brushed Quadcopter

This is a customizable frame for brushed coreless motor micro quadcopters. I started designing this when the frame on my Blade Nano QX started getting beat up. So far, the mounting area in the center is designed to hold the Blade Nano…

Downloads
84
Likes
11
Rating
0
P
PrintablesAnton

Quadcopter Wall Mount

Wall mount for race drone. Version 2 is a little bit more beefed up Category: R/C Vehicles

Downloads
81
Likes
9
Rating
5
P
Printablesps915

[REMIX] Micro 105 FPV Quadcopter - 8.5mm/7mm Motors, Micro Scisky

Remix more stronger arms/motor mounts you can now access Scisky/Quanum USB Port better rubber mount hole for antenna integrated power Plug ( first insert plug than hot glue) higher topplate (+6mm) version with your own standoffs Thanks…

Downloads
80
Likes
8
Rating
5
P

Quadcopter arm

this is a suitable arm for a 450 style quadcopter. after trial and error i'm fairly happy with this design. my current arms have not broken in a long while. no support needed, i designed it with support included. Category: R/C Vehicles

Downloads
78
Likes
7
Rating
0
P
PrintablesJoza

Joza TX130 quadcopter frame

After fooling around with 5" and a whoop, I decided to build a 3". But what fun would it be to design my own frame? Well, it worked out awesome. The frame is a TrueX, 130mm motor to motor. Overall weight (including props, battery strap,…

Downloads
77
Likes
11
Rating
0
P
PrintablesCircleofOwls

Racing Quadcopter Keychain

This is just a little keychain fob modeled after a racing quadcopter. I'd recommend using one of the prop guards to attach it to your keychain (or wherever) but there is a version with an extra loop as well if you'd prefer, it's…

Downloads
74
Likes
2
Rating
0
P
PrintablesMupshot

3 inch micro quadcopter

This was an experimental project that has become one of my favorite quads. Initially intended to be a 2s Li-Ion cruiser, I have found that a light 450mah 4s battery really lets this guy scream. A gentle flight. a not so gentle flight Be…

Downloads
74
Likes
20
Rating
0
P
PrintablesAndy Forsberg

Toy Quadcopter

My toddler son always wants to play with my 'real' quadcopter multicopters. So, I thought making a toy multicopter would be a fun project that he'd enjoy playing with. Solidworks files included for your remixing enjoyment. 1.16.14 update:…

Downloads
71
Likes
9
Rating
0
P
PrintablesMusaedQ8

Quadcopter brushed 7mm

Quadcopter frame for 7mm motors Length: frame: 75mm arms: 30mm Width: frame: 25mm arms: 8mm Height: Frame: 2.5mm Arms: 3mm This thing was made with DesignSpark Mechanical 2.0 Category: 3D Printing

Downloads
70
Likes
5
Rating
0
P
Printablesludodg

DadDrone_3: Quadcopter 450-size foldable, camera-suited

Wanted a rather medium size quadcopter for basic flying, being able to transport FPV-camera and shooting HD-images, -video ... ... but it had to be foldable for transportation in a backpack, on holliday. Motors and props rather low kv and…

Downloads
69
Likes
9
Rating
0
P
PrintablesL3M4R

Abyss2022 quadcopter frame - 3.5", 4.0", 4.5", 4.7" (DJI Spark) and 5"

3D printed, modular quadcopter frame. General notes Supported propellers: 3.5, 4.0, 4.5, 4.7 and 5 inch Motor mount pattern 12x12 for all except 4.7 inch (this one is dedicated to DJI Spark’s 3x11mm mount type) Supported camera mount…

Downloads
65
Likes
5
Rating
0
P
PrintablesJRD

Emax Micro Power System 1104 - FPV Quadcopter

I created this Quadcopter as something to take the brilliant emax 1104 micro power bundle. It's built to take the 1104 motors, ESC's etc along with the FEMTO F3 flight Controller.…

Downloads
63
Likes
4
Rating
0
P
PrintablesCNC Kitchen

SeCopter 250 - Quadcopter Frame V1.0

First version of my 3D Printed Quadcopter frame. The configuration is currently for the parts which I still had laying around at home: KK2 board (…

Downloads
63
Likes
39
Rating
0
P
PrintablesOSi

Foldable quadcopter FPV

This project is not completed yet !!! ... however for those who is interested in there is also FreeCAD file available which is updated time after time. ... development discontinued... Category: R/C Vehicles

Downloads
60
Likes
9
Rating
0
P
PrintablesprintwithmeXYZ

90mm Brushless Quadcopter Frame

I made this quadcopter frame for the PepperF1SH project. I haven't tried it yet, but I want to CNC it. It's designed to be 1.5mm carbon, yet it weighs less than the original frame at 2.2g! Buy the frame here:…

Downloads
59
Likes
8
Rating
0
P
PrintablesDuggem

Quadcopter Cookie Cutter

I didn't see anything like this. So, here is one. :D Like real quads, it's important to have extra props handy. The hub can be used for the motors or you can use other round chocolates. I used Rolos ( https://www.amazon.com/s?k=rolo+candy…

Downloads
57
Likes
12
Rating
0
P
PrintablesWIFIOG

F450 quadcopter battery tray 5000MAH 3S

I didn't want the top screws of the F450 frame damaging my lipo so I designed this top plate that carries a 5000MAH 3S battery and has room in the corner for a GPS mast and mount. Thanks for checking out my model I hope it helps you, if…

Downloads
55
Likes
9
Rating
0
P
PrintablesL3M4R

BigFoot 9.4" R2 quadcopter frame (phantom edition)

BigFoot 9.4" R2 (phantom edition) https://rotorbuilds.com/build/23274 Huge, 9.4" quadcopter frame based on TBS SourceOne and typical racer quadcopter parts. It uses DJI Phantom II motors/propellers because of it popularity and price. I…

Downloads
54
Likes
8
Rating
0
P
PrintablesJoe Mattie

Joe's FPV QuadCopter variant

This is a spin-off of MikeyB's excellent 3D Printed Quadcopter. I have made a number of upgrades and modifications. The arms are now solid. I ran several tests and the solid arms only weigh around 1.5 grams heavier when printed at 25%…

Downloads
53
Likes
9
Rating
0
P
Printableshygy

Crow - Detachable Aerial Photography Quadcopter Drone

I'm creating a bigger and more efficient quadcopter (for longer flying time) that can be easily disassembled (to carry). I'd like to be control from the ground station, maybe later with optical recognition by raspberry pi using opencv or…

Downloads
52
Likes
17
Rating
0
P
PrintablesChuck

Remix Micro 105 FPV Quadcopter

This is my remix of punkkills excellent Micro 105 FPV Quadcopter. http://www.thingiverse.com/thing:1221911 punkkills also gives credit to the FireFlo V2 and the Alpine Drones Micro H. The frame is light and fairly stiff printed with ABS.…

Downloads
52
Likes
9
Rating
0
P
PrintablesFalling Entropy

Drone Quadcopter - mini sculpture

This minimalist sculpture of a drone quadcopter goes well with many decors. The sculpture is freestanding on a desk, shelf, cabinet, etc. Prints fast without supports.

Downloads
51
Likes
5
Rating
0
P
PrintablesVincenzzy

Compact Drone Miniature – 3D Printable Quadcopter Model

The Compact Drone Miniature is a detailed 3D printable quadcopter model inspired by modern drone technology. Designed for makers, students, and tech enthusiasts, this miniature captures the sleek structure and propeller layout of real…

Downloads
51
Likes
7
Rating
0
P
PrintablesFujisama

Blade Guard for Drone Quadcopter

Replacement Blade Guard fitted with Haobo Explorer Drones Edit: seems to be also compatible with Syma X5 Explorers & T2M Spyrit quadcopters You can use a wire to connect each blade guard to avoid any risk. Category: R/C Vehicles

Downloads
51
Likes
5
Rating
0
P
Printables463N7

HSW Small Quadcopter Hanger

Designed specifically for my 3" FPV drone but will hold smaller as you can see in the images i also have my Darwin FPV Babyape in one as well.

Downloads
51
Likes
19
Rating
0
P
PrintablesAndy Forsberg

FPV Camera Mount for QAV210 / H210 Quadcopter

I wanted a simple adjustable angle FPV bracket for my Crazepony (Crazypony) H210 and 700TVL FPV camera. I couldn't find one that I really liked to I put this together. It's intended to be adjustable, simple & lightweight. I also included…

Downloads
50
Likes
5
Rating
5
P
Printablesmarkjohn

S500 Quadcopter Leg to Body Joint

These parts often break and it's nice to have a quick replacement part. This connects the 16 mm diameter carbon down-tube of a quadcopter to the frame.

Downloads
49
Likes
3
Rating
0
P
PrintablesBoA

Wire management for quadcopters builds

Print in TPU. I used 40D shore

Downloads
49
Likes
10
Rating
0
P
Printablesfan4tix

FalconOne - Quadcopter made in Germany

My latest Quad design. The frame is nearly fully printed. You only need some wooden bars and some screws. I've provided an Assembly Guide with detailed instructions and lots of Images (as we all love lots of images, don't we?) on how to…

Downloads
48
Likes
4
Rating
0
P
PrintablesMade By Dennis

X260 Quadcopter

Quadcopter style drone originally designed in 2017 for computer controlled swarm acrobatics. You can't buy the original electronics anymore but upgrading to newer ESCs and flight controllers should be easy. The original cost was < $200…

Downloads
48
Likes
6
Rating
0
P
PrintablesDrift638

Slat Wall Quadcopter Hanger

@mutefpv designed an excellent wall hanging hook for quadcopters. I have Slat Wall so I added the end to be able to use this on slat walls. Original files @ https://www.thingiverse.com/thing:4872172 Print Settings Printer: Prusa Mini…

Downloads
47
Likes
5
Rating
0
P
PrintablesJon916

YMZFPV Lightning1 2inch FPV Quadcopter Battery Holder

YMZFPV provided me with this TPU Battery Holder STL for their Lightning1 2" FPV Quadcopter. I also made a larger remix for Tattu 550mah batteries that were slightly bigger.

Downloads
47
Likes
5
Rating
0
P
PrintablesKacper

3 inch quadcopter

3 inch quad :D Nozzle diameter 0,4mm Layer height 0,30mm 15~25% infill

Downloads
46
Likes
5
Rating
0
P
Printablesjurassic73

Quadcopter Lipo balance plug retainer

This is a balance plug holder/leash to keep the plug from wandering into the prop. It's held great for this purpose and is pretty universal. Filament used - https://www.amazon.com/gp/product/B07BGXV6W5/ Print Settings Rafts: No Supports:…

Downloads
46
Likes
7
Rating
0
P
PrintablesStudio Mechanik

Cinewhoop Drone Quadcopter

Cinewhoop Drone Quadcopter Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) All my drone-related items: https://www.printables.com/@StudioMechanik/collections/3053772

Downloads
45
Likes
14
Rating
0
P
PrintablesOshawaAbe

Quadcopter prop puller - 4blade

Metal fork propeller pullers are difficult to use and results in the risk of broken or bent quadcopter components. This 3D print requires user to pull along the axis of the motor shaft, so no bending occurs. One end of print is for CW and…

Downloads
44
Likes
7
Rating
0
P
Printablesfranciscorp

Micro Quadcopter 105 FPV FLF3 Evo

This is a customization of Printbus Micro Quadcopter 105mm 110mm FPV Scisky , to fit the following hardware: Eachine FLF3_EVO Control Board JF-01 800TVL CMOS Mini FPV Camera (without the case) Added printable pins, clips and rollbar,…

Downloads
44
Likes
5
Rating
0
P
PrintablesDwall

Quadcopter Landing Skids

Simple quadcopter landing skids. I printed the bottom layers with PLA for a sturdy base to attach screws, then the rest with flexible TPU for better shock absorption. There is a 16x19mm and 16x16mm mounting pattern. Let me know if you…

Downloads
42
Likes
6
Rating
0
P
PrintablesLindh3D

Martian Micro Quadcopter Propeller guards

This propellerguards are for the Martian Micro FPV Quad Copter with 1103 motor mount and a maximum of Ø60mm propellers. Mounts underneath motor with the same screws as motor. Print instructions Category: R/C Vehicles Print Settings…

Downloads
41
Likes
5
Rating
0
P
PrintablesGarth

Quadcopter

This has been a long term project of mine. It was heavily inspired by Joop Brokking's auto-leveling quadcopter build. I 3D printed the body of the drone to house the electronics. The flight controller for the drone was built using an…

Downloads
41
Likes
7
Rating
0
P
PrintablesL3M4R

CinePunk3 R3 - 3D printed cinematic quadcopter frame

CinePunk Release 3 (3 inch) symmetrical, modular cinematic quadcopter frame dual HD camera support (mounted on front and rear) designed for both: flexible (TPU) or stiff (PETG) ducts versions removable propeller ring to support TPU duct…

Downloads
40
Likes
8
Rating
0
P
PrintablesStelzenbach

FPV LED Lamp 533 Switchback /Quadcopter, Drone, Racedrone

LED light in the shape of the 533 Swichback Frame. Fitted with a cut out for a simple LED control board. The logo is a multicolor print where the first layers are printed with a translucent material. After the function check, the housing…

Downloads
38
Likes
10
Rating
0
P

MNP-275 Quadcopter

My version of a 275 size quadcopter with foldable arms. you will need some 3mm bolts for the top plate. I use 30mm bolts and nuts with nylon inserts. Each arm needs an additional 2 bolts, 3mm x 20mm. the camera mount has a 1 part and 2…

Downloads
37
Likes
5
Rating
0
P
PrintablesJoe Mattie

Wobbly Arm Fix for MikeyB's FPV Quadcopter

My simple, printable fix for MikeyB's FPV quadcopter. Please note this is for the older version of the arms (which I have reuploaded) Instructions Should speak for itself! Category: R/C Vehicles

Downloads
36
Likes
5
Rating
0
P
PrintablesMish

20 AWG Motor Wire Protector for FPV Quadcopter

This design is simply rolled over the wire, so they can be added or removed at any time without desoldering or pulling wires through. The F3D file is included to modify/create any length. As you make them longer (printed upright), the…

Downloads
36
Likes
5
Rating
0
P
PrintablesExperiential

AirXRP Alpha - XRP Powered 3D Printed Quadcopter

AirXRP Alpha is a 3D-printable, XRP-powered educational drone designed for indoor and outdoor experimentation. It combines a standard flight controller for stable flight with the XRP controller as a companion board, making it easier to…

Downloads
35
Likes
28
Rating
0
P
Printablespex

PEX96 - Micro FPV quadcopter brushless 96mm frame - Remixes

Hello folks This frame is a remix of my PEX96 frame, it is designed for 20x20mm FC and ESC mount and for 19/2035 propellers. This is a 96mm class frame with holes for 1103/1105 motors (Racerstar BR1103 and DYS BE1104 motors have been…

Downloads
35
Likes
5
Rating
0
P

Coreless Motor Quadcopter

A simple design for Coreless Motor Quadcopter

Downloads
34
Likes
0
Rating
0
P
Printablesjhitesma

90mm printed quadcopter frame for br1103 motors

I got bit by the nano/piko/femto quad bug and had to make one. I liked the look of @microdure's frame, but it was bigger than I wanted. I had already started working up a very minimal frame design and printed it as 80/90/100 mm....but…

Downloads
33
Likes
7
Rating
0
P
PrintablesSaow

FPV Quadcopter : BLS Forza - Arm Protection

Here are 3 kinds of TPU arm protections for the great BLS Forza frame. Enjoy ! Update : Added "BLS Forza Arm Protection - Triangle Gauche (wider back).stl" and "BLS Forza Arm Protection - Triangle Droite (wider back).stl" to try a less…

Downloads
33
Likes
3
Rating
0