Search results: rain

Sort order

11,608 models

P
Printables3DPrintBunny

Safe from the Rain

'Safe from the Rain' is a string artwork with a space under the umbrella to slot a figurine of your choice. It prints without supports Print at 0.2mm layer height and if using Bambu Studio set your wall generator to Arachne. You can…

Downloads
20,642
Likes
5,552
Rating
4.92
P
Printablessh

🚉 SET: Lego DUPLO train tracks (optimized)

UPDATE 25.2.2022: check out my lego duplo BRIDGE ! https://www.prusaprinters.org/prints/137837-set-lego-duplo-train-bridges-optimized UPDATE 11.2.2022: added 0.3mm layer height gcode files for all tracks → faster prints , still looking…

Downloads
10,486
Likes
1,171
Rating
4.9
P
PrintablesLolcio

Soap dish, Sponge dryer with drainer. INDX gcode included

The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…

Downloads
8,928
Likes
1,476
Rating
4.94
P
PrintablesCreative MinerX

Heart puzzle - Brain teaser

There are 363 ways to fit the 16 pieces into the frame. Good for all ages. Hint: The solution is engraved in on the backside, so you can't lose the solution. :-) Enjoy your time! Print instructions Print at least from two colors.

Downloads
8,205
Likes
1,343
Rating
4.92
P
PrintablesAndrás Bognár

Minimalist Duplo - Brio, IKEA, Wooden Train adapter

Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…

Downloads
5,575
Likes
696
Rating
4.96
P
Printablesgbombadon

Golf grip training aid

Print upright on bed for best strength and accuracy, put the arrow marker at the top. I added a single support for the bottom tab that sticks out, and a brim for good adhesion. Otherwise, standard PLA works well for snapping onto a…

Downloads
4,793
Likes
394
Rating
4.71
P
PrintablesBest_codes

Train Benchy

This is a simple 3D model based on the Benchy concept. It requires supports, so you can test your printer's support capabilities too. Below, you can see some things to look for in the print. Rounded Faces Test how your printer does with…

Downloads
3,825
Likes
234
Rating
5
P
Printables3DLabPrint

Qtrainer – simple trainer plane

Although not as fancy as other planes, this QB based trainer is going to be a workhorse of your daily flying. Transferring from foamies get used to a different behavior of scale weighted and rigid planes with this durable, easily…

Downloads
3,592
Likes
513
Rating
3
P
Printables3DVJ Models

ChooChoo - A Lightweight/Support Free 4 Tone Train Whistle v3.1

Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…

Downloads
2,934
Likes
838
Rating
4.96
P
PrintablesPavel Pelčák

Train station for railway model in H0 scale

Train station model created in Fusion 360 from a project foundable on http://www.smpd.cz/olympia/projekt.html Print instructions For easy printing, model is sliced to 4 parts which can be easily glued together.

Downloads
2,911
Likes
271
Rating
4.86
P
Printablessh

🌉 SET: Lego DUPLO train BRIDGES (optimized)

UPDATE 26.2.2022: added V2, V3 for pillars (3mf for tighter connection to other duplo bricks and for better overhang printing) added short straight track (the size of ordinary straight original track) with big side protrusions, which are…

Downloads
2,855
Likes
380
Rating
4.93
P
PrintablesTinkrMakr

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

Downloads
2,669
Likes
521
Rating
4.82
P
PrintablesMrViddy

Chopstick Cheaters Helpers Trainers

Inspired by the design from FUN CHOP chopstick helpers. Great for rounded chop sticks as well. Recommend Print in PETG for flex and strength. Recommend 100% Infill FunChop chopstick Helpers (Amazon Link⬇) https://a.co/d/1i6oWUr

Downloads
2,460
Likes
460
Rating
4.95
P
PrintablesTechNerd

Toy Train BRIO / IKEA compatible

I've build a toy train (BRIO / IKEA compatible) that I've made for my son. This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium…

Downloads
1,800
Likes
647
Rating
4.88
P
PrintablesCreative MinerX

3x3 Cube Puzzle - Brain teaser

Classic three-dimensional solid puzzle. Seven unique shapes combine into a simple cube. And there's more than one solution. Print and gift this fascinating puzzle game to your familly and frinds. Great for ages 8 and up. Print also…

Downloads
1,524
Likes
264
Rating
4.84
P
PrintablesTechNerd

Toy Train BNSF locomotive BRIO / IKEA compatible

BNSF diesel locomotive toy train (BRIO / IKEA compatible) You will need the following screws to put everything together. 14x ISO 14585 (DIN7981) 2.9mm x 13mm ( https://amzn.to/3WgKty1 ) 2x ISO 14585 (DIN7981) 2.9mm x 19mm (…

Downloads
1,463
Likes
455
Rating
5
P
PrintablesTurbopstros

Bonsai / Plant Pot with Drip Tray, Drainage mesh

Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…

Downloads
1,389
Likes
447
Rating
4.86
P
PrintablesilMitch

Outdoor Sun/Rain Shield for Aqara Temperature Humidity Zigbee Sensor

Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…

Downloads
1,255
Likes
223
Rating
4.85
P
PrintablesAinon3Dtisk

5-speed training gear shifter

Hello, Today I have a 5-speed training gearshift for you. It is great for practicing manual gearshifting in a car. It prints several parts, there are also files for multi-color printing. For proper functionality, you need to use a Print…

Downloads
1,193
Likes
32
Rating
4.75
P
Printableslizard_e_

Droid Restraining Bolt Fridge Magnet (Star Wars)

Hello there! Tired of your fridge running away only to be taken by some jawas and sold to the first scruffy-looking nerf-herder that comes their way? It seems like it's a problem that has plagued us for generations… or at least since…

Downloads
1,180
Likes
475
Rating
4.95
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief

Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…

Downloads
1,179
Likes
287
Rating
4.97
P
Printables3DLabPrint

Cessna 152 based trainer/sport plane

This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/cessna-152-based-trainersport-plane/

Downloads
1,158
Likes
146
Rating
4
P
Printablesglsf91

Solar panel water draining clip for flat roof

If you have solar panels on a flat roof and the panels are less then 15 degrees mounted, some water will stay in the lower edge of the panel. After some time your panel become dirty in the lower part and it reduces photovoltaic panel…

Downloads
1,144
Likes
141
Rating
5
P
Printablesphi.gl

Bridge pillar for Ikea/Brio train track

Bridge support compatible with Ikea and Brio wooden train track. Minimalistic design that allows great variability of use. Main features: Tracks connector for better stability Stackable to create higher bridges Easily printable without…

Downloads
1,055
Likes
191
Rating
4.56
P
PrintablesCG Muffin

Manu Militari - Base set (hexagonal terrain tiles system and complementary game rules)

Manu Militari (witch translate to “With a military hand” in Latin, meaning using military force or force of arms) is an hex-based terrain tiles system that can be used for wargames, strategy games, RPGs and so on… The tile system At its…

Downloads
989
Likes
194
Rating
5
P
PrintablesHarry

Weather Station One Part 4 - the Rain Gauge

Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…

Downloads
950
Likes
199
Rating
4.83
P
PrintablesCreative MinerX

Ball Puzzle - Brain teaser

A beautiful and challenging puzzle. The arcs on every piece have the same radius as the outer circle, thus any pc could potentially match along the outer edge or adjacent to any other pc where a concave curve meets a convex curve. But,…

Downloads
949
Likes
162
Rating
4.87
P
PrintablesEricFrenk

Can Strainer | Kitchen Gadget

The 0.5" model is good for just straining the liquid. The 1" model is better for things like tuna cans where you want to remove a majority of the liquid.

Downloads
910
Likes
146
Rating
5
P
PrintablesPapyjo

Rail train Lego croisement de voies compact avec aiguillage

Ce croisement de voies avec aiguillages est conçu pour un encombrement réduit. Encombrement total largeur 23cm longueur 46cm avec entraxe 16cm. En sortie d'aiguillage j'utilise des courbes de rayons différents 40 et 48cm Il nécessite 2…

Downloads
908
Likes
164
Rating
5
P
PrintablesTechNerd

Toy Train Tank Car BRIO / IKEA compatible

Tank car for toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below). You…

Downloads
889
Likes
227
Rating
4.9
P
Printablescopper

Train Tracks

A small collection of tracks I modeled as a present. They should fit an Thomas the Tank engine track set but I've only tested it on one. Includes: 1 straight section 1 flex section 2 three way forks 1 intersection Print instructions For…

Downloads
879
Likes
168
Rating
5

Utility for training basic sailing knots

According to the manual, kids will model simple mooring cleat, which will help them to learn how to tie cleat hitch. After printing, mooring cleat can be screwed to the wooden base with two screews.

Downloads
857
Likes
167
Rating
5
P
PrintablesCreative MinerX

Dowel Puzzle - Brain teaser

There are eight dowel segments that you must fit into a box. You should be able to get seven pieces in with ease. What about the last piece? Print includes handy cover. Enjoy

Downloads
851
Likes
163
Rating
4.58
P
PrintablesCzech_printer

Impact grenade from Rainbow Six Siege

I found this model at MyMiniFactory and modified it for easier printing. I also added a stand and made a fuse out of wire and a key ring. For better details, use the variable height layer on the Impact Grenade button part as you can see…

Downloads
794
Likes
175
Rating
5
P
PrintablesLGworkshop

Strain Relief Shroud for ADA 369 DC Jack

The Adafruit 369 DC jack allows you to add a low voltage barrel connector to a wire, but the wire is unsupported at the connection point. This shroud provides strain relief and snaps onto the jack to with only minor mods needed. This…

Downloads
788
Likes
296
Rating
5
P
PrintablesDROO

YETI Tundra™ Cooler Drain Plug

I recently lost my Drain plug to my Yeti cooler. So I made a new one! This project includes one plug that you can use with no gasket. There is another plug too this one is to be used with a gasket, and I've also included a gasket to be…

Downloads
774
Likes
73
Rating
5
P
PrintablesSJM

H0 Train Station Platform, Bahnsteig Eisenbahnstation 1:87

H0 1:87 Trainstation Platform, Eisenbahnstation Bahnsteig. You can connect two platform elements with the connector and build a longer platform. You get four versions created for the C-Gleis of Märklin & My World: 1026mm FR like high…

Downloads
745
Likes
78
Rating
4.67
P
PrintablesAdam

Downspout gutter diverter for rain barrel

Update 2024-05-15: There is a new version that includes two side ramps for additional rainwater collection. It's available for the 2"x3" and 2 5/8" × 2 5/8" sizes so far. Update 2025-03-04: Added a “bare” outlet adapter to use as a base…

Downloads
698
Likes
177
Rating
4.86
P
PrintablesCzech_printer

Rainbow six siege keychain

This model was inspired by https://www.thingiverse.com/thing:1603188 Printer: Ender 5pro Rafts: No Supports: No Resolution: 0.3 mm Infill: 10 % Ironing: Top layer

Downloads
630
Likes
66
Rating
5
P
PrintablesPaKr82

Whistle Train Steam Engine Narrow Gauge With Hook

This is my first public model, sorry for not being super trooper. I did my best. I created this for my kids and they like it so much. Unfortunatelly whistle is so noise, sorry for this. I started with this model…

Downloads
603
Likes
49
Rating
5
P
PrintablesSJM

H0 Train Station Platform Passenger Bridge Add-On, Bahnsteig Eisenbahnstation 1:87

H0 1:87 Passenger Bridge for Trainstation Platform, Eisenbahnstation Bahnsteig. You need the base train station platform . You can connect two platform elements with the connector and build a longer platform. You get four versions created…

Downloads
586
Likes
62
Rating
0
P
PrintablesTechNerd

Toy Train Union Pacific BRIO / IKEA compatible

Union Pacific toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below). You…

Downloads
586
Likes
174
Rating
5
P
PrintablesTickTock

HarvestRight Freeze Dryer Drain Plate

[update] I created a new version ( https://www.printables.com/model/663843-improved-harvestright-drain-hose-plug ) that helps maintain a good drainage angle better. You probably want that one. [/update] Didn't like the hose just resting…

Downloads
574
Likes
52
Rating
5
P

Butterfly training knife fixed (Butterfly Comb / Balisong Comb)

Butterfly knife blade (Butterfly Comb / Balisong Comb)

Downloads
568
Likes
59
Rating
5
P
Printableswahnby

basic rails compatible with vtech Go! Go! Smart Wheels choo-choo Train / tchou tchou bolides

Track piece to extend this circuit. Short and medium rail have the same length that original parts. Half short is, as it sound, half the size of the short one. It usefull to fill gap in some cases. Print instruction: Supports needed for…

Downloads
565
Likes
66
Rating
5
P
Printablesgrandpaeasy

How to train your dragon Bookmark Strike class

Bookmark for How to train your dragon fans, it has the strike class logo on it which is the class Toothless is in

Downloads
561
Likes
88
Rating
5
P
PrintablesCreative MinerX

Ice Puzzle - Brain Teaser

The goal of this puzzled is to fit all 9 pieces into the frame provided. More challenging than a normal jigsaw-puzzle! Model include handy cover, made with PrusaSlicer modifiers . Check the .3mf file. Enjoy Inspiration from…

Downloads
556
Likes
88
Rating
5
P
Printablessquinn

Curvy Pot with Integrated Drain Tray

This beautiful curvy pot prints-in-place with the drain tray attached and ready for planting. The model includes a series of hidden channels beneath the plant that allow the water to drain out to the outer portion of the tray, where you…

Downloads
539
Likes
182
Rating
5
P
PrintablesNiels Cor

Duplo Train Barrier

Recreation of LEGO Holder 2 x 2 x 2 with B And Rot. Con. (13358) LEGO White Road Barrier with Red Stripes (14269) Holder can be printed with supports from bed. Barrier best printed in halves and glued together. Holder does not have the…

Downloads
536
Likes
101
Rating
4.88
P
PrintablesCreative MinerX

Cube Puzzle - Brain Teaser

The goal is to make a unique square/cube out of the 4 identical pieces. It is a tricky puzzle! The second version is to create two connected rings. Enjoy!

Downloads
521
Likes
110
Rating
5
P
PrintablesTechNerd

Norfolk Southern toy train (BRIO / IKEA compatible)

Norfolk Southern diesel locomotive toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy…

Downloads
488
Likes
148
Rating
5
P
Printablesbarnslig

Greenhouse Rain Gutter Hose Connector

Collect rain water from your greenhouse gutters using this hose connector and blind plug! Both parts are provided as left and right variants, so they fit both sides of the greenhouse. Requirements The gutter must be 38 mm wide and 21 mm…

Downloads
439
Likes
54
Rating
5
P
Printablesk1ngjulien

Desert Rain Frog Key Chain Remix

The frog itself doesn't need supports, but the hook does.

Downloads
424
Likes
51
Rating
5
P
PrintablesChurchiP

Classical Train Set - Cookie Cutters

This is a classical themed cookie cutters set consisting of a steam locomotive, a stack wagon, a container wagon and a ballast wagon. Since so many cookie cutters end up in having huge cookies but in our familiy smaller sized cookies is…

Downloads
406
Likes
57
Rating
5
P
Printablesundoz

Brio Train Rail Connector

Printed in PETG, extra solid with 4 shell layers.

Downloads
391
Likes
72
Rating
4.8
P
PrintablesSJM

H0 Train Station Platform Ramp, Bahnsteig mit Rampe 1:87

H0 1:87 Ramp for Train station platform, Eisenbahnstation Bahnsteigrampe. You get models for a left and a right side ramp. You can connect two platform elements with the connector and build a longer platform. You get four versions created…

Downloads
390
Likes
58
Rating
5
P
PrintablesSJM

H0 Train Station Platform Stairs, Bahnsteig Treppe Eisenbahnstation 1:87

H0 1:87 Trainstation Platform, Eisenbahnstation Bahnsteig. You can connect two platform elements with the connector and build a longer platform. You get four versions created for the C-Gleis of Märklin & My World: 1026mm FR like high…

Downloads
373
Likes
64
Rating
5
P
PrintablesStephen J

Magnetic Dog Scent Training Capsule

I printed a couple of copies of @Adam 's most excellent rock scent-training capsule recently: https://www.printables.com/model/295199-scent-trainer-rock and was impressed with both the concept and execution. As an aside - I've also…

Downloads
367
Likes
51
Rating
5
P
PrintablesFC2M3D

Cute Anatomical Brain Keychain

Easy to make a cute Anatomical Brain keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
363
Likes
62
Rating
0
P
PrintablesAndré

Journeys in Middle-Earth: Shadowed Paths terrain

Component replacement for Lord of the Rings: Journeys in Middle-Earth: Shadowed Paths expansion. File names say how many copies are needed for each. Nest Web and Nest Base are glued together afterwards. I added some webbing on the eggs…

Downloads
358
Likes
55
Rating
5
P
PrintablesFC2M3D

Cute Clouds and Rainbow Keychain

Easy to make a cute Clouds and Rainbow keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
344
Likes
45
Rating
5
P
PrintablesStephen J

Dog Scent Training Capsules

I had previously re-mixed some dog scent training capsules that had a magnetic base - https://www.printables.com/model/936563-magnetic-dog-scent-training-capsule My daughter wanted to use the capsules with a cheap rubber safety non-slip…

Downloads
342
Likes
50
Rating
4.67
P
PrintablesCreative MinerX

Hexagon Puzzle - Brain teaser

Puzzles For Both Adults And Kids. Hexagon is devided into 11 pieces, which adds complexity and flexibility. This Hexagon Puzzle is an ideal way to raise children's spatial visualization and intellectual abilities. Puzzle has also handy…

Downloads
342
Likes
69
Rating
5
P
Printablesfixumdude

Fixum Dude Motors PiP Diesel Train

One engine plus five different train cars included in this simple print in place train set. All the cars print without supports with wheels and hooks that move right off the build plate. Examples printed at 0.2 mm layer height with 3…

Downloads
338
Likes
89
Rating
5
P
PrintablesZachryWD

Ukraine Support Awareness Pins / Badges

Glory to Ukraine! Glory to the Heroes! 4 Designs for printing in Ukraine's state colors, blue and yellow. You don't need an MMU and the provided gcode has a filament change pause. gcode files: (B) in the filename, for Blue color first…

Downloads
337
Likes
87
Rating
5
P
PrintablesRobertusMaximus

SCI FY Tower Terrain

Another incredible SCI FY terrain piece! This tower is made to process the toxic choking atmosphere of the incredible dirty industries that rule within the endless city-state megalopolises of the White Desert. Even the retched standard…

Downloads
322
Likes
61
Rating
5

Train Bridge / Tunnel for Brio Type Trains

A support for the Ikea/Brio type train bridge. It will fit slightly larger than typical trains. If you like this model check out this collection of my other toy train models.

Downloads
319
Likes
69
Rating
4.75
P
Printablesbmccarthy321

Rain Barrel Bung

I started with drilling a hole in the side of my rain barrel to allow drainage, but I needed to put a screen over it to keep the bees out. So instead, I made this bung so I could put a screen fitting in place instead. Since then, I've…

Downloads
317
Likes
43
Rating
5
P
PrintablesZach

Water Wheel - D&D Scatter Terrain

A set of pieces to build a water wheel featuring wood texture and pass-through connections for detail. This is a great piece because it's easy to paint and detail (can throw some basic wood colors, drybrush, throw on a dark wash) and can…

Downloads
317
Likes
83
Rating
5
P

Camera Rain Cover

A cover to prevent the motion detection of the camera to get triggered by heavy rain or snow. Made for Ezviz cameras and fully compatible with the following models: Una protección para evitar que la detección de movimiento de la cámara se…

Downloads
314
Likes
43
Rating
5
P
PrintablesSJM

"Lokliege" Model Train Service Port H0

H0 1:87 Model Train Service Port “Lokliege”. You get a single 245mm width or five connectable sizes (100mm, 150mm, 200mm, 225mm, 240mm) to build the width you prefer. It will fit at least all H0 1:87 model trains but maybe usable for…

Downloads
312
Likes
44
Rating
5
P
PrintablesMichal Fanta

Grain Wagon for Wooden Tracks

Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…

Downloads
308
Likes
55
Rating
5
P
PrintablesPombay

Muli bicycle (E-bike) battery rain cover / Shimano BT-E8010

Would appreciate your make, a like and/or voting ;-) The wonderful Muli cycle carrier bike (https://muli-cycles.de/de/bikes/motor) has one weak point. When the bike is set out to rain/ wet weather-conditions, water tends to stay in the…

Downloads
298
Likes
10
Rating
4.5
P
PrintablesSteveS42

Laundry Detergent Cup Drainer Larger

The most recently purchased jugs of all® detergent have a larger diameter screw-on cap. My guess is they are standardizing with the rest of the industry as the new cap is the same size as OxiClean™ and several other bottles of various…

Downloads
278
Likes
24
Rating
5
P
PrintablesSJM

H0 Train Station Platform, Bahnsteig Mitte Eisenbahnstation 1:87

H0 1:87 Trainstation Platform, Eisenbahnstation Bahnsteig. You can connect two platform elements with the connector and build a longer platform. You get four versions created for the C-Gleis of Märklin & My World: 1026mm FR like high…

Downloads
273
Likes
24
Rating
0
P
PrintablesCreative MinerX

Square puzzle 9pcs - Brain teaser

Very small puzzles that will give you a hard time. It's nothing easy. Hint: The solution is engraved in on the backside. Print instructions I recommend printing puzzles in four different colors. It looks amazing. Enjoy!

Downloads
266
Likes
43
Rating
5
P
Printablessh
18+

The source marked this model as adult content.

Downloads
263
Likes
37
Rating
0
P
PrintablesCreative MinerX

Triangles puzzle - Brain teaser

Place all of the nine triangles in a square cutoff. Puzzles For Both Adults And Kids - not so difficult. Enjoy! Print instructions Print from two colors. The gcode of the base frame part has included colorchange.

Downloads
262
Likes
35
Rating
4.67
P
PrintablesAinon3Dtisk

Training knife case including LARP/Airsoft knife

Hello, Today I have for you a training knife case including a LARP/Airsoft knife . It contains 3 parts of the case that need to be glued or screwed. There is also a model of a compatible knife. For better printing, you need to cut it in…

Downloads
254
Likes
51
Rating
0
P
PrintablesEFY

Best Sink Filter Strainer 38mm - 45mm Compatible

Design Description: Sink Drain Filter This design is a specially crafted sink drain filter aimed at enhancing the cleanliness and functionality of sink drains. Compared to traditional sink drains, it is more efficient and user-friendly.…

Downloads
249
Likes
30
Rating
5
P
PrintablesJohn

Tetrahedron brain-teaser

Tetrahedron brain-teaser Print instructions Print from PLA. It may be necessary to grind the parts gently with emery paper. 3bals.stl print 2x and 3ball.stl print 4x. Object: Assemble printed parts to the shape of tetrahedron.

Downloads
246
Likes
48
Rating
5
P
PrintablesGuinuf

Drain Plug Karcher WD6

After losing the drain plug of my karcher vacuum cleaner, I modeled one that I share with you here. I preferred to print it in PETG but I think PLA can be good too. In addition to the printed part you will need an 17x3mm O-ring to seal…

Downloads
240
Likes
14
Rating
5
P

Sink Drain Nut

This is a nut I designed for my kitchens sink drain, as the others I tried didnt fit well enough and it leaked. I will also upload the .SLDPRT file in case anyone needs to edit any of its dimensions, whether it is the inner diameter…

Downloads
238
Likes
23
Rating
5
P
PrintablesArjan Knulst

Respiratory Muscle Trainer (RMT)

Respiratory Muscle Trainers (RMTs) are proven to be useful in improving the condition of patients after breathing-related conditions like COVID-19 or COPD. These RMT devices are neither well-available nor affordable in most Low- and…

Downloads
234
Likes
44
Rating
0
P
PrintablesGregoryGM

Hexagonal modular magnetic terrain tiles for tabetop rpg

Hexagonal magnetic terrain tiles for tabetop rpg. You need also magnetic balls 5mm, 6 for one pice. You should stop print in 6mm layer hight, so you can insert magneses in each wall. In my uploaded g-codes i have made pause in right place…

Downloads
231
Likes
73
Rating
5
P
PrintablesCreative MinerX

Bitten Biscuits - Brain teaser

On a flat surface, create an image of mirrored symmetry. Try this challenging puzzle made and designed by Jin-hoo Ahn that won a Jury Honorable Mention at the IPP Design Competition (International Puzzle Party) in Kyoto, Japan 2016. The…

Downloads
222
Likes
34
Rating
5
P
PrintablesRon Harding

Drain Insert for Hornady Powder Measure

Why spend $20 on Hornady's Powder Measure Drain insert, when you can print one for 14¢? Printing Notes Contact area on the build plate is very small. Use a brim. A little bit of wet-sanding may be necessary.

Downloads
218
Likes
33
Rating
5
P
PrintablesSJM

H0 Train Station Platform with downstairs, Bahnsteig Eisenbahnstation 1:87

H0 1:87 Trainstation Platform, Eisenbahnstation Bahnsteig. You can connect two platform elements with the connector and build a longer platform. You get four versions created for the C-Gleis of Märklin & My World: 1026mm FR like high…

Downloads
200
Likes
17
Rating
0
P
Printablesmike

x-axis strain relief for Prusa MK3 and MK4

For this strain relief you'll need: 3x allen bolts M3x10 and 2x M3 square nuts Both should be included in the spare parts bag. Assemble: After printing clean all holes and cut off the brim Push both square nuts in the therefore provided…

Downloads
195
Likes
42
Rating
5
P
PrintablesDr. Terra

Netatmo Rain Gauge Holder

A simple holder to mount my Netatmo Rain Gauge to a flat wooden pole. Printed with PETG for UV resistance and 100% infill for stability (might be not necessary). Paint on Support below the plate (see gcode file)

Downloads
193
Likes
13
Rating
0
P
PrintablesTomasH

Plastic window drainage cover

When they insulated our panel house, they insulted us with one cover, so why not model it and print it out :).

Downloads
190
Likes
21
Rating
5
P
PrintablesSJM

AddOn for H0 Train Station Platform with downstairs, Bahnsteig Eisenbahnstation 1:87

These are some add-ons for the Train Station Platform with downwarding stairs . You get a stairway railing /handrail and a fitting roof. Settings Value Infill 25% (adaptive cubic) Perimeters 2 Layer Height 0.15 mm Structural Material PETG…

Downloads
189
Likes
24
Rating
5
P
PrintablesPavel Novák

Adaptér pro dřevěnou vláčkodráhu, kompatibilní s LEGO DUPLO / Adapter for wooden train tracks, compatible with LEGO DUPLO

Díl spojuje dřevěnou vláčkodráhu a LEGO DUPLO. Přidává možnost postavit nádraží nebo tunel The piece combines a wooden train track and LEGO DUPLO. Adds the ability to build a station or a tunnel.

Downloads
184
Likes
21
Rating
0
P
PrintablesH3dSprint

Railroad crossing for curved track - toy train

The railroad crossing is build up by 5 parts to get a smooth surface for the road. To connect the parts of the inner and the outer curve, I have designed a dovetail guide. The parts was assembled in a vice to avoid tilting, but it should…

Downloads
181
Likes
30
Rating
0
P
PrintablesFlo

Tool for VW Common Rail Diesel Engines Oil Filter Drain Reservoir (13 mm) Golf 7 and others

With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…

Downloads
178
Likes
22
Rating
5
P
PrintablesVlasta Šulc

Human Brain from MRI images

Reupload of my brain in 1:1 size for prusa for schools account. more details later

Downloads
178
Likes
29
Rating
0
P
PrintablesiZboxo

Cube Chain Brain Teaser

Print in place, works after you get it off buildplate. Print this brainteaser and have fun with your friends! Challenge them who can build it faster! NOT EVERYONE CAN BUILD IT! I've printed it for my grandma, she's been strugling with it…

Downloads
172
Likes
25
Rating
5
P
Printablesjonashedlof

Lego Creator train rail for 40518

Have used PLA. You can use sand paper on top of rail if wanted. My mission was to create easy to use and build train rails. Save filament Fast print Make lots of track quickly Play and have fun Found out you need to dismount double boogie…

Downloads
169
Likes
19
Rating
4