Search results: raise

Sort order

1,118 models

P
PrintablesBennacerismo

Apple Magic Keyboard 2-in-1: Raiser and vertical stand

all available raisers had angles that were too wide for my liking. So I made one, it connects to the keyboard via slide rails, you can also flip it over to keep the keyboard upright when not in use. Tilt the pieces towards the inside, as…

Print approx. €3.13–€3.82 excl. taxPreliminary estimate for one variant

Downloads
634
Likes
61
Rating
4.8
P
PrintablesAinon3Dtisk

Raised middle finger hand gesture

Hello, I have here for you the Gesture of the hand with the middle finger raised . A luxurious sculpture for your desk, especially for work :-D :D. It works great :-D. It prints very nicely. Good luck with the printing! I used PLA/PETG as…

Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant

Downloads
564
Likes
31
Rating
0
P
Printablesc-arts-modelle

Samsung A22 (5g) Smartphone-Case with raised lip

Phone case for the Samsung A22 With raised lip (height about 1.5 mm) for a better protection of the display. Compared to the original model, the case is about 1.5 mm thicker. The edge is not flush with the display. Printed in PETG or PLA.…

Print approx. €3.69–€4.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
470
Likes
15
Rating
0
P
Printablesdintz

Wichtel Hochbeet / Dollhouses Raised Flowerbed

This gnome raised flowerbed (German: Wichtel Hochbeet ) can be used as an accessory for a Christmas gnome door or in a dollhouse. Print settings I printed the model with 0.2mm layer height, 30% infill with the PrusaSlicer QUALITY profile.…

Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant

Downloads
422
Likes
68
Rating
5
P
PrintablesAxelCo

Raiser / stand for MikroTik RB5009UG+S+IN / RB5009UPr+S+IN POE IN/OUT router

Raiser / stand for MikroTik RB5009UG+S+IN and RB5009UPr+S+IN POE IN/OUT (thank you @Omni_RF for testing) router. With the stand the ground clearance is 24mm. Thus, you can route your network cables underneath the device and also help to…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
283
Likes
33
Rating
0
P
PrintablesBoros

Modular dog raised bowl

This model is designed to fit a Prusa MK4. You can use PLA for printing. For general infill, I suggest using 5%. However, for the joints, please use modifiers to increase the infill to 15% or 20%. I hope your dog enjoys it :)

Print approx. €6.43–€7.85 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
22
Rating
0
P
Printablesstritti

Robot Vacuum Cleaner-friendly Raiser for Sideboard - parameterized

Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…

Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
22
Rating
0
P
PrintablesMetikumi

Decorative Six-Pointed Stars with Raised Geometric Profile

I designed these decorative six-pointed stars with a clean geometric profile, ideal for shiny or metallic filaments that highlight their intricate details. Each star includes two small holes at opposite tips, allowing you to create a…

Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
10
Rating
0
P
PrintablesLOCKit

Raiser stand for cat water fountain dispenser or bowl no supports

Cats survival instinct makes these furry companions tend to drink water from above the ground level to avoid poisoning or bacteria infection. This little stand will help your pets keep their instincts intact and also let the spilled water…

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
44
Likes
10
Rating
0
P
Printablesyyy

Dell Gaming Monitor Raiser

This riser matches the base of Dell's gaming monitor, a (hopefully) less ugly way to raise the monitor a bit. My own monitor is a G3223D, but I think this should fit their entire gaming lineup circa 2023. See photo. As an additional…

Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
5
Rating
0
P
PrintablesShaggy

D&D movement rule 30ft raised letters

Just a little twist. Have fun, great ice breaker gift when meeting new players

Print approx. €3.45–€4.21 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
2
Rating
0
P
PrintablesCesare Catitti

raised stand warpaints colors in prusament cardboard box

a remixed model to let bottles stay fixed at mid air even when the box is shaked

Print approx. €3.02–€3.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
31
Likes
6
Rating
0
P
PrintablesMakerPy

Phanteks P400 raised feet

These feet raised your Phanteks Eclipse P400 case off the ground, which helps if you have carpet. You'll need two of each model to raise your case off the ground. I printed mine with 3 walls and 20% infill. This might be excessive for the…

Print approx. €4.08–€4.98 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
6
Rating
0
P
PrintablesRuddO

Raiser stand for Model F Labs Model FSSK keyboard

Some Model F keyboards from the fledgling Model F Labs are famous for not having any leg stands that allow the owner to prop the back of the keyboard up for ergonomics. So I solved this problem myself: here is a parametric model you can…

Print approx. €4.42–€5.40 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
1
Rating
0
P
PrintablesQubiki 3D

M4 Mini raiser/dock with holder for OWC Express 1M2 NVME

I would love to share with all of you my holder/dock for Apple's M4 Mini with integrated OWC Express 1M2 holder enclosure. With added notch for the power button Print Setting's : I Recommend PETG or any stronger more heat resistant…

Print approx. €4.51–€5.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
8
Likes
1
Rating
0
P
PrintablesDavid D

Raised Multiconnect - generic connector for multiboard v2

Generic connectors to hang your bins/shelves or anything else to your multiboard, now in version 2. The connector is pretty generic and allows you to attach anything you want. Note: There also is a flush version of multiconnect for…

Downloads
8,512
Likes
817
Rating
4.78
P
PrintablesTony F

NorcoT Creality K1 Max Glass Lid Raiser (with Sliding Vents)

My custom designed lid raiser for the Creality K1 Max. I wanted a simple version which required no additional components but allowed me to open and close the vents on the fly. Lid raisers for the K1 Max help improve the clearance between…

Downloads
8,172
Likes
687
Rating
4.88
P
PrintablesDeltaprints

Design Headphone Stand "Wellraiser"

Modernly designed holder for headphones with clear, minimalist shapes. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL +…

Downloads
4,515
Likes
985
Rating
5
P
PrintablesDutchDeveloper

The best Bambulab Glass Top Led Raiser mod

I remade the model in fusion and made it so to allow me to add the ledstrip that i bought from aliexpress , I hooked the ledstrip up to a custom PCB which can controll the RGBCT from homeassistant and will clone the Bambulab Ledstate from…

Downloads
2,722
Likes
258
Rating
4.88
P
PrintablesAnHe

lid raiser for Creality K2 plus (2025-02-22 added VE2)

simple, basic lid raiser for Creality K2 plus Raises the glass lid by 40mm so that the bowden tube no longer rubs against the glass. Adds the option of ventilation. The ventilation sliders are inserted into the front, back and side…

Downloads
2,326
Likes
242
Rating
5
P
PrintablesVector3dArt

F1 Keyring - Formula 1 Logo Contoured (Raised)

F1 logo contoured keyring with raised logo. Simple keyring that can be printed in single or multiple colours. Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament. For best…

Downloads
2,251
Likes
404
Rating
4.88
P
PrintablesMeyui

Onami Pet Food Bowl Raiser Stand

This piece joins the Meyui ONAMI Collection , carrying forward the series’ iconic wave-inspired frame. Elevated to 13 cm , it helps your cat or small dog eat in a natural, ergonomic posture while keeping the dining area tidy. Adjustable…

Downloads
2,246
Likes
1,136
Rating
5
P
PrintablesChristian K

Creality K1 Top Spacer / Raiser

This is a remix of a thing by timlee . Thanks to timlee for making the fundamentals for this thing! What is it? A lot of users of the new Creality K1 have released their bowden tube from the cable chain in an attempt to make extrusion…

Downloads
1,715
Likes
154
Rating
4.7
P
PrintablesPaul Milovanov

Backrest raiser for Thule Urban Glide 2 stroller

The most upright backrest position on the Thule Urban Glide 2 stroller is too reclined. This gadget props it up higher. It's based on the ingenious design by @Thomas_157995 which is really clever and well done. I've used one of Thomas's…

Downloads
1,486
Likes
66
Rating
5
P
Printablesshadowandy

Lid supporter for Creality K1/K1C Hinged Lid Raiser

If you are using the Creality K1/K1C Hinged Lid Riser and need to keep the lid open while printing some materials (e.g., PLA), do you feel that the opened lid is wobbling/ shaking a little too much during prints? Look no further. This…

Downloads
1,395
Likes
139
Rating
5
P
Printablesrogerquin

Raised Cable Strain Relief for SOVOL SV06 3d printer

This heat bed cable strain relief raises the cable up to a 30° angle coming out from the heat bed and minimizes/eliminates cable contact with the rear frame cover. The most common cause of heat bed cable failure is solder joints breaking…

Downloads
1,381
Likes
166
Rating
4.91
P
PrintablesLMaker

Creality K1 - Chain Raiser (No supports)

Chain Raiser for K1 extruder No supports needed. Help the movement of the chain without interferences with head and rods Other mods for Creality K1 You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación…

Downloads
1,239
Likes
128
Rating
5
P
PrintablesCospri Corps

Lemarchand box - Hellraiser puzzle

Lemarchand box, from the movie hellraiser made into a puzzle

Downloads
1,176
Likes
261
Rating
5
P
PrintablesSpackenJaeger

Lid raiser for Creality K2 plus with LED strip mount(2025-04-06 added VE3)

simple, basic lid raiser for Creality K2 plus now in Version 3 The following I copied from Original https://www.printables.com/model/1169180-lid-raiser-for-creality-k2-plus-2025-02-22-added-v Raises the glass lid by 40mm so that the…

Downloads
1,057
Likes
108
Rating
4.9
P
Printablesdisney7

Craftsman Raised Panel Wrench Organizer LoserKid418 Remix

Thanks to LoserKid418 for adding access to the OnShape object for his original design! I'm in the process of learning Fusion 360, so I used his original object as a reference to remake it in F360. This is the first thing I've created in…

Downloads
942
Likes
121
Rating
4.67
P
PrintablesDimension Zero

GraviTrax Junior Raiser (1-5cm)

These raisers are made for the GraviTrax Junior marble tracks to raise the tracks for longer runs

Downloads
866
Likes
62
Rating
4.8
P
PrintablesJmike_fr

Fastener for NorcoT Creality K1 Max Glass Lid Raiser (with Sliding Vents)

Fastener for lid raiser made by Tony F for the Creality K1 Max printer.

Downloads
851
Likes
104
Rating
5
P
PrintablesSteve Hodge

Hellraiser / LeMarchand / Lament Configuration Puzzle Box

A somewhat functional version of the puzzle box from the Hellraiser movie franchise. Turn one of the dials to unlock the box and allow it to be moved to the star configuration. Does not summon Cenobites though. The face designs are based…

Downloads
834
Likes
180
Rating
5

(UPDATED: 05/10/23 NEW DUAL EXTRUDERS GCODE!!!) HOW TO: Using PrusaSlicer with Raise3D Pro3 Model Printer

07/17/2023: 0.6mm Nozzle First Layer Tips! Read below on how to get rid of those gaps/crevices in your first layer when using 0.6mm nozzles. The following was performed on the 0.2mm Layer Height Profile. Manually increase your z-probe…

Downloads
829
Likes
32
Rating
0
P
Printablesagmcmll

Protractor / Goniometer raised numbers, fully printed, no supports

Protractor made with all printed parts, no supports. The numbers and graduations are raised, ideal for 2 colour prints. I did mine by performing a colour change for the last two layers. I found similar models both here and on Thingiverse,…

Downloads
798
Likes
219
Rating
4.83
P
PrintablesPeter Farell

Hellraiser Lament Configuration

Reproduction of the Hellraiser Lament Configuration based on LeMarchand Boxes. Phillip LeMarchand was a French architect, artisan and designer who is posthumously credited as possibly one of the most prolific, if undiscovered, mass…

Downloads
793
Likes
135
Rating
5
P
Printablesepnasis

Bambu Lab X1C glass top LED raiser for BLLEDController

I adjusted @DutchDeveloper design to include cut out for handle screws.

Downloads
730
Likes
90
Rating
4.9
P
PrintablesAlex_cf_Siu

Glue free Creality K1 Top Spacer / Raiser - Honeycomb vent [18June2023 Updated]

This is very very tight, need to hammer in. And it have rib design to catch and stay in place with the OG top lid. Might need support for the one with hole. If need to print things like ABS, just masking tape around to tape over the…

Downloads
701
Likes
92
Rating
5
P
Printables3DprintMyLife

Desk organizer and monitor raiser

I designed this to make my desk more organized. UPDATE 16.09.2024: Split Boxes avaiable! Can be printed on printbeds with 254x254 (bambulab etc.) UPDATE 13.09.24: Now Splitparts available !!! So you can print with smaller printbeds!…

Downloads
696
Likes
402
Rating
5
P
Printablesloller

Playstation 5 (PS5) horizontal stand minimalistic version - raised versions

Wanted the original stand to be a bit higher, so I have altered a bit.

Downloads
680
Likes
44
Rating
3
P
Printablesdelta2529

Acer Nitro 5 (2019) Laptop Raisers

Laptop raisers that are compatible with the 2019 version of the Acer Nitro 5 Gaming Laptop. They slide into place on the underside at each end using the screw holes as an anchor point/guide. Good for improving airflow or better…

Downloads
670
Likes
51
Rating
5
P
PrintablesOinos

Parametric Raised Garden Bed WIP

This is a variation of @kerlemakerspace's raised garden. I wanted something with a simpler design and also something I could fit for the pieces of wood I was recycling. The model is provided so you can adjust it easily for the width and…

Downloads
659
Likes
210
Rating
5
P
PrintablesSgtKiLLx

Xbox Series S Raisers

I noticed theres a vent on the bottom of the Series S as it lays horizontal. In my circumstances, I cant stand it up vertically. So I decided to design something quick to lift it up 20mm.

Downloads
630
Likes
80
Rating
4.25
P
Printablesthall72

Lego Compatible (2552.dat) Baseplate 32 x 32 Raised with Ramp and Pit

This model is compatible with the lego system.

Downloads
629
Likes
81
Rating
0
P
PrintablesMangouste

Sci-fi raised bunker

The old school bunker from your favourite magazine back in 2nd edition. To have the same configuration as the picture, Tower End x1 Tower End, mirrored x1 Tower Corner x1 Bridge x2 Category: Buildings & Structures

Downloads
607
Likes
129
Rating
4.75
P
PrintablesPepe

Ender 3 v3 SE KE Z Gantry support Without drilling+ Raise the screen REMIX

Ender 3 v3 SE KE Z Gantry support Without drilling+ Raise the screen

Downloads
603
Likes
109
Rating
5
P
PrintablesErikjuh

A bunch of hands with raised fingers

I needed some hand models with different numbers of fingers raised. I Couldn't find ones I liked, so I made some using DAZ Studio. These need to be printed with support (except #5 and the Vulcan salute). See…

Downloads
592
Likes
67
Rating
4.5
P
PrintablesAlex_cf_Siu

Hinged lid raiser with LED mount for Creality K1

This is a remix of JC's modular riser system. Three major changes i made: 1.) increased height, so it can be use with Extruder fan mount 2.) LED mount for the betweeners 3.) now use M3 screw&nuts for the pin, no more pin dropping and…

Downloads
592
Likes
115
Rating
3.75
P
PrintablesNigie

K1 Max tilt open lid support redesigned to fit K1 Max Glass Lid Raiser (with Sliding Vents)

This is a refined tilt open support, with a strengthed and angled glass lip and designed to fit K1 Max Glass Lid Raiser

Downloads
572
Likes
61
Rating
4.9
P
PrintablesPrestolixer

[V2] Super ergonomic raiser for K1/K1C (.f3d required)

Easy to print: 12 pcs (count of prints in name of files) Without any supports and bridges. Material: ABS or PETG (pay attention to the shrinkage of the plastic to prevent gaps) Easy to assemble: 1. Fix pairs of angles with M3x16 on top…

Downloads
556
Likes
83
Rating
5

Cat & Dog Food Bowl Raiser Stand, STL 3MF OBJ

I am happy to present this set of 4 pet bowl holders! You can choose the one you like best, and you can also change the diameter Ø of the bowl hole. Remove the heart symbol ❤ If you wanna to remove the heart simbol (e.g. to save print…

Downloads
552
Likes
141
Rating
0
P
PrintablesTrzaX

Raised pet bowl holder - Duo 100/120/150 mm

Simple raised pet bowl holder for a healthier eating position. It's got three parts that have to be glued together. I made it from PETG for better durability. Supports are needed under the legs pins. I made variations for different bowl…

Downloads
548
Likes
373
Rating
4.8
P
PrintablesAndreagattonero

Raiser legs for Cricut Maker/Maker3

Yes you can find dedicated furniture for your CriCut machine, but we have a 3d printer for many reasons including the “I'll do it myself”. So here it is, a simple idea to raise your Maker (or Maker3) from the table and have room to store…

Downloads
535
Likes
157
Rating
5
P
Printablesccd

Budget Raised Bed Bracket System

I WOULD HEAVILY RECOMMEND TO PRINT IN ASA or ABS IF YOU HAVE ACCESS, PETG AND PLA MAY GET BRITTLE OR DEGRADE OVER A SEASON OR TWO HOWEVER YOUR MILAGE MAY VARY. USE DARKER COLORS OR PAINT FOR BEST UV RESISTANCE. I have not tested these in…

Downloads
523
Likes
269
Rating
5
P
PrintablesWingWong

FlashForge Adventure 5M/Pro: Cable Chain Termination for AliX Kit Cable Chain (Remodel and Raised)

V2: Remixed David's newer chain since I was having sag problems. Remodeled it and raised it up by 8mm. STL is already in correct print orientation.

Downloads
504
Likes
66
Rating
5

Passive-Aggressive Sink Warning Sign (Multi-Color & Raised)

We all have that one co-worker who treats the sink at work like it's their sink at home and lets their dirty dishes sit in or around the sink for their spouse to clean. The only problem with that is if that spouse doesn't work where you…

Downloads
503
Likes
247
Rating
5
P
PrintablesWhity

Raised Bed Sprinkler

A simple and small sprinkler i made for my raised bed. Video: https://youtu.be/ph-5ruPQspw The diameter of the hose connecter is 7mm. So a hose with 6mm inner diameter should work fine. I used an ordinary pond pump and it doesn't require…

Downloads
501
Likes
123
Rating
4.67
P
PrintablesEG3Dprinting

Raised Speaker Stand

This is a simple two-piece speaker stand. It keeps desk speakers above the desk surface and parallel with your ears for a much better listening experience. Assembly is super easy, just align the lip of the top piece toward the low point…

Downloads
486
Likes
68
Rating
5
P
PrintablesTomPek

K1 Max LIT Raiser. All in One Glass Lid Raiser with LED and Fasterners

Thanks to Tony F and michel jubault for the Inspiration and the basedata. Installation Quickguide: 1. Print 4 Sidebar (with or without Vents how you like) 2. Print the same amount of Vent Slides 3. Print 3x Corner Spacer 4. Print 4x…

Downloads
484
Likes
74
Rating
5
P
Printablesmuller

K1 Max Lid Raiser / Semi Open

This print helps maintain the printer's ventilation without needing to remove the cover. It can be useful when there isn't a suitable place to remove the cover, but you want or need increased internal ventilation. Another use is when the…

Downloads
466
Likes
35
Rating
5
P
PrintablesErer2001

NR200/NR200P PC case raised U shape feet

3 shell, iron the top surface for better look. Very easy to print.

Downloads
464
Likes
70
Rating
4.8
P
Printablesmenka

PS4 Pro Foot, Console Raiser Stand

Print 4 of these and insert them on the sides of the console. This raises the console 3cm above the surface for improved air circulation and better cooling. (You can use some rubber tape for the bottom of the feet) Remixed form…

Downloads
460
Likes
51
Rating
4.83
P
PrintablesSnafky

Seatbelt Plug raise Clip

My parents got another car which missed the raising bulbs to keep the seatbelt plug high (you can grab it) So i made something that could help them Update: It is advised to make this thing from ABS or other high temp plastic. Because…

Downloads
460
Likes
49
Rating
5
P
Printablesthall72

Lego Compatible (30271.dat) Baseplate 32 x 48 Raised with Corner Pits

This model is compatible with the lego system.

Downloads
455
Likes
70
Rating
5
P
PrintablesTrzaX

Raised pet bowl holder - single 100/120/150 mm

Simple raised pet bowl holder for a healthier eating position. It's got three parts that have to be glued together. I made it from PETG for better durability. Supports are needed under the legs pins. I made variations for different bowl…

Downloads
453
Likes
231
Rating
5
P
PrintablesDoctorStrobe

Ender 2 Pro Raised Feet

Some simple feet to raise the Ender 2 pro up about 1 inch and provide better air flow for the cooling fan. The top of the feet have a 1/8" pocket that the stock rubber pads fit into. No need to remove the stock rubber feet. The rear left…

Downloads
452
Likes
55
Rating
5
P
PrintablesOsheiitt

NFC Tag Raised Paw Print Keychain

Wanting a cute keychain that has NFC Tag capabilities? I have it for you! I do offer the file on my etsy if you wish to have commercial rights. YOU WON'T NEED TO PAY FOR A SUBSCRIPTION JUST THE FILE ITSELF.…

Downloads
451
Likes
60
Rating
5
P
PrintablesJuanV

Aeon Trespass: Odyssey Interlocking Map Card/Tile Frame - Resized and Raised

Edit - print v3, see changes below!! Edit 05.2025 - Added 3x3 and 4x4 tiles, more info belw. Thanks thingiverse user taboobat for the excellent design! It is able to stack and locks very well without using magnets. For me, it had two…

Downloads
447
Likes
22
Rating
5
P
PrintablesMottN

Ski Drill Jig Templates (Version 1 - Raised Text)

These are templates for my ski drill jig (found here ). *** This version has raised text for easy multi-color print. If have a printer with multiple heads or an automatic filament changer, see version 2 . They are organized into different…

Downloads
395
Likes
24
Rating
5
P
PrintablesDut97_

Cupra Born Armrest raiser

Little print to raise the arm rest of your Cupra Born

Downloads
392
Likes
13
Rating
0
P
PrintablesJoeydoc1

Aquarium Light Raiser (Rimmed)

Hello, this is my first model I have uploaded but not the first model I have designed so please let me know about any possible modifications I should look into. This is a simple aquarium light raiser for rimmed aquariums. Should be…

Downloads
383
Likes
41
Rating
0
P
PrintablesKali

Sky Team Ice Braking Holder / Raiser

When using 3d printed sliders like https://www.printables.com/model/890612-sky-team-boardgame-sliders-thin-brim or https://www.printables.com/model/711058-sky-team-board-game-sliders the ice breaking board does no longer fit well. With…

Downloads
375
Likes
39
Rating
5
P
PrintablesVoltex

Rush Tank Solo Mount / FPV 20mm to 30mm Raiser

I wanted to install a Rush Tank Solo on my Quad, but I noticed that the only mounting options it offers are 20x20 on the top side of it. Since I have my TBS Tracer right where my 20x20 Mounting Holes are on my Frame and I didnt want to…

Downloads
360
Likes
23
Rating
0
P
Printablesmasu

Apple Magic Keyboard Raiser

Description Raise the Apple Magic Keyboard for more comfortable use. Print Settings Bracket: Supports: No Resolution : 0.2mm Infill: 20% Perimeter: 4 Extender(you need two(2) of it): Print in on the side, see photo for orientation.…

Downloads
353
Likes
43
Rating
5
P
PrintablesChance Beard

Globe With Raised Continents

This 3D globe model features raised continent outlines to give a tactile, visual sense of Earth's geography. Designed for both educational and decorative use, it's perfect for classrooms, desks, or space-themed projects. The raised relief…

Downloads
347
Likes
25
Rating
0
P
PrintablesWhiteDragonD

Hole Gauge Calibration Diameter block test, with raised numbers

Check out Version 2: https://www.printables.com/model/1481683-hole-gauge-calibration-v2-diameter-block-test-with I kept guessing at hole sizes for support rod inserts into models. This print allows for rod insertion testing to know what…

Downloads
342
Likes
36
Rating
5
P
PrintablesNadir @ CN3D

Sovol SV08 TPU Feet Raiser

We have 2 versions 32mm tall and 27mm I have also added a bigger/flat bottom part + i have added cross bridges so it will not need support. + increased the walls to be more rigid when the screw sits Print settings: 5 Top/Bottom 3 walls…

Downloads
337
Likes
63
Rating
5
P
PrintablesXPloadED

Guitar String Nut (Holder/Raiser)

As the String Saddle for my Classic Guitar broke down over the years, and replacement parts are stupid expensive, I designed this replacement part, which worked great on my guitar, though might eventually be a little off on others. So in…

Downloads
332
Likes
40
Rating
5
P
PrintablesVector3dArt

NASA Keyring - Worm Logo Contoured (Raised)

NASA Worm logo contoured keyring with raised logo. Simple keyring that can be printed in single or multiple colours. Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament.…

Downloads
330
Likes
89
Rating
4.83
P
PrintablesJason

Furniture Raiser

Fusion 360 File Included so you can change the size of the top, bottom, and loft. Used to lift my Ikea desk 10mm to give the RoboVac enough room to sweep under without getting caught. Print instructions Category: Household Summary Fusion…

Downloads
320
Likes
60
Rating
5
P
PrintablesBjørn Frihagen

Anycubic Kobra 2 - Feet raisers

After modding my Anycubic Kobra 2 with 92mm fans, I needed some feet raisers to clear the thicker fans from the table. These feet raisers/spacers fit inbetween the printer and the rubber feet themselves. I simply used a M4x40 screw to fit…

Downloads
308
Likes
44
Rating
5
P
PrintablesVincent Peter

Dremel 4000 / Modification mini fraiseuse

Je vous présent la modification de la colonne Dremel 4000 . J'ai créé cette mini fraiseuse à partir de la colonne Dremel d'origine, modélisé sur fusion 360. Pratique pour travaillé le bois le plexi l'aluminium tendre , et pour tous…

Downloads
303
Likes
102
Rating
0
P
PrintablesOxmstr

Kingroon KLP1 raised top

A simple mod to raise the top lid. 2 versions available; for brass threaded inserts or self tapping screws. 4.5 mm diameter of holes for threaded inserts, 2.7 mm holes for self tapping. Corners are symmetric. First print 1 long piece and…

Downloads
300
Likes
40
Rating
5
P
PrintablesJohanTess

Atomstack X20 PRO raiser feet

Raiser feet for the Atomstack X20 PRO series. Raises the laser frame by 25mm. Included step and obj files for your own remix. The screen foot has to be placed first without the frame. Depending if you want the mounting screws in or out…

Downloads
297
Likes
25
Rating
0
P
Printablescmuche

Ender 3 (V2/V2 Neo) Raiser Feet

You need to raise your printer if you want to install fan upgrades. These feet adapt to the ender 3 design and raise your printer so you can install larger fan covers underneath.

Downloads
295
Likes
38
Rating
4.5
P
PrintablesAeroH

The best Bambulab Glass Top Led Raiser mod-V2

Changed the position where the RGBCCT light strip can be bent to better fit. We have also made some changes to the dimensions, increased the angle of the lamp surface, and opened lamp slots. There are holes in the back for threading.

Downloads
291
Likes
20
Rating
3
P
PrintablesArchviceduke

Lid raiser for K1 Max with roll up/down lid

As a K1 Max owner I think it is a right of passage to create a lid raiser design so here is my effort. As I have gone down the chain free route and wanted to move my sensor, the rear section includes a removable bracket for the runout…

Downloads
289
Likes
53
Rating
5
P
Printableszap387

Sig Saur logo round key chain with raised letters

Created a round SIG logo keychain. I will be creating and uploading a bunch of other gun related stuff in the future.

Downloads
286
Likes
22
Rating
5
P
PrintablesLowinenPien

TV stand/feet raiser for Hisense

A 0,79inch (2cm) high raise for hisense tv feet. The Hisense tv feet is shown in the picture and fits nice on the raise. I created the raise because my soundbar is currently to high in front of the tv and blocks the signals from the…

Downloads
284
Likes
28
Rating
5
P
Printableshallonhatt

Dell XPS 15 Raiser Stand

A stand I made for the Dell XPS 15 9570 to make it level with my other screen. It probably fits just as well with the previous models (9550, 9560) but I have not tested this. You can also stick smaller laptops in it but then the angles…

Downloads
283
Likes
45
Rating
5
P
PrintablesFipsthedog

IKEA Couch Feet Raise for FRIHETEN Corner sofa-bed

This is designed to raise our couch to accomodate our Dreame vacuum robot. Scale (only) the height in your slicer to adapt the heigth of the raiser. Includes a raise for the roller aswell. The raisers can also be stacked, should your…

Downloads
281
Likes
42
Rating
5
P
PrintablesNigie

K1 Max top mounted filament spool holder modded to use vented raiser from NorcoT

K1 Max top mounted filament spool holder modded to use vented raiser from NorcoT https://www.printables.com/model/623798

Downloads
281
Likes
53
Rating
5
P
PrintablesElsni

MIDI keyboard desktop stand / raiser feet

Here is a model of a stand or feet for a MIDI controller keyboard that raises the keyboard by almost 4cm at the front and 5.5cm at the back. This is perfect for routing cables underneath the keyboard, and flat controllers such as the Akai…

Downloads
273
Likes
27
Rating
5
P
PrintablesMakeseum

Laser Cutter Material Raisers

These 3D printed material raisers are designed to elevate and support materials being processed in a laser cutter, ensuring optimal airflow and clean cuts. Each raiser has a sturdy, grid-like structure that evenly distributes weight while…

Downloads
272
Likes
47
Rating
5
P
PrintablesVector3dArt

SpaceX Keyring - X Logo Contoured (Raised)

SpaceX “X” logo contoured keyring with raised X logo. Simple keyring that can be printed in single or multiple colours. Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament.…

Downloads
268
Likes
81
Rating
5
P
PrintablesDoctorStrobe

Ender 3 V2 Raised Feet

This is a large foot which will raise the printer 1.25" to allow for fan modifications where the fan hangs down below the printer. The pad fits over the existing rubber pads with a snug fit. An optional pad can be printed from TPU or…

Downloads
264
Likes
53
Rating
4.8
P
Printablesspeed7

Gridfinity - 2x5 - 1/4" Drive Socket Holder Metric (4-14mm) - Raised text

I loved the original model but the recessed text makes it really difficult to paint or do multi-colored prints. I removed the recessed text and replaced it with raised text for easy multi-colored prints.

Downloads
257
Likes
47
Rating
4