20,648 models
NO, THERE IS NO WAY TO GET A LICENSE TO SELL THE BOX COMMERCIALLY. MY DESIGNS WILL ALWAYS BE FREE FOR NON-COMMERCIAL USE ONLY. PLEASE STOP ASKING! The design is based on the " Tool box parametric " by Yanev and provides some more options…
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
V2 : increase of the mecanical play of the axis to avoid that the two parts are welded during printing. Improved closure. Just change the dimension in fusion 360 to resize it.
Print orientation: flat
I saw a few models on here for printable SKADIS pegboard and I love the idea. However, many of the models were dimensioned wrong for my printer or intended purpose. I decided to make a simple to edit, parametric file for generating…
For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
Remodelled version of Filament Dust Filter by sneakypoo . Almost identical to the original, but remodelled from scratch in Fusion 360 making it parametric so it's easy to tweak and sharing the F3D file so anyone can easily customize it.…
Tested in PETG, recommended to print in PETG
Inspiration: https://makerworld.com/en/models/815908-over-door-hook-wall-shower-hook-many-thickness#profileId-767349
Update: Extra hole for screw mounting ( d = 3 mm )
Electric Cable mounts, mounted using screws D=3mm or double sided tape. Parametric using the STEP file :)
This is a custom-designed picture frame, available in several sizes and configurations. Each side piece prints individually and connector pieces hold it all together. There are several variations of the connectors depending on how tight…
Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…
Model consists of 4 bars (two sides, upper one and lower one) and four connection pieces. The longest one is the side bar and can only be printed diagonally on the bed. Lower bar has two integrated latches that hold the picture from the…
Für meinen Virtuellen Flipper (VPin) habe ich eine einfache und kompakte PC ATX Halterung gebraucht. Es sind vier Druckteile notwendig. Das linke und mittlere hat eine Aufnahme, um das Netzteil darunter festzuhalten. In dem Beispiel ist…
Introduction Inspired by "Cable Corners... keep cables in corners!" by muzz64 on Thingiverse Fusion 360 parametric design This is for bend-sensitive cables, such as Cat 6 and Cat 6A. In the case of these cables, the curvature of the bend…
Electric Cable mounts, mounted using double sided tape. Parametric using the STEP file :)
This design was inspired in 2 other designs in this site: https://www.thingiverse.com/thing:2339441 https://www.thingiverse.com/thing:2668159 Since I could not find for the original file to adapt it to my battery with protection circuit…
Modular Picture Frame Kit Update 03/06/2026 The metric frame parts 120mm up to 180mm angles were wrong. They were 44.13 degrees and should obviously have been 45 degree cuts for the corners. Thanks to Frey4cre for pointing this out. These…
A modern approach to the wavy style plant pots with the use of parametric settings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…
A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes . The STLs for three different sizes of each style are included here for convenient printing. This model is fully…
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
This has been remixed from https://www.thingiverse.com/thing:1615502 and turned into a picture frame. Parts Needed (4) M3*8 screws Print Settings Supports suggested for the opening of the photo. Layer height of 0.20 mm or smaller. 10%…
I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…
Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…
Easy to assemble stand for a 4”x6” photo frame. Having a few homemade ¾” hardwood photo frames for 4”x6” photos, it was only natural to come up with a sturdy stand for them. Hopefully these will work for you. The stand’s back is around 6”…
This is simple picture frame with stand. The connection between the front part and the rear part is press-fit. Originally the frame was created for a picture height / width: 105 mm / 150 mm (PictureFrameFront.stl,…
Update 07/06/2026 FreeCAD redesign is done! Testing is on its way. There will be many new parameters for more control; the model will be more resilient to changes; more sizes will be available; A new derivative design will exist (one that…
The idea behind this design was to create a photo frame that is as simple as possible while still being unique in its own way. Standard dimensions 9x13cm 10x15cm Updates 26.03.2022 - Added portrait version for the 10x15 Printing details…
Be prepared for the toughest snowball battle's this winter !!! 4 Sizes: 80mm 120mm 150mm 180mm
Included in this pack are small medium and large square sheets as well as hexagonal and triangular cuts. You can edit the number links and shape of the sheets in any 3d modelling software to get the exact shape you desire before printing.…
I wanted a wall hanging frame for my selfprinted photos wich didn´t need much filament and looks fancy ;) The frame is scalable through the parameterized f3d file. Depending on your printers print quality, the inner frame sit´s tighter or…
Update 2025-06-01 : Added STL files for a spool column to allow spool stacking. They're sized to allow for a wide variance in spool widths and hub diameters. I've got a bunch of filament spools sitting around, and wanted to turn them into…
A simple burger patty press designed to be strong enough so you can really pack your patty tight. The bottom is removable so your burger just pops out. Waxed paper separator discs in a variety of sizes are readily available on Amazon.…
This is just a very simple sliding lid box that can be used to store things like game bits and keep them safe. The F3D file includes adjustable parameters for Height, Width, Length, Thickness and Clearance . If you would like a different…
UPD v23: Fixed wall thinkness issue on top cover UPD v25: Fixed fillet fails to calculate for small “holes"; Fixed top/bot X axis pattern for large boxes (>50mm width) UPD v26: Fixed side wall holes number and offset calculation, now…
I've created a parametric bottle with a knurled or fluted cap that scales up as large as desired for the Gridfinity system. I've included STLs for some basic sizes, and my Fusion360 Archive file so you can generate your own. I like the…
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
This remix thickens the loop to reduce the change of breakage via wear and tear.
Overview This customizable, parametric FreeCAD model features a simple box with a sliding lid that clicks into place. Features Fully parametric design Easy-to-print design without the need for supports Snap-fit sliding lid mechanism Ideal…
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display PSA graded TCG spots cards wall holder and display frame.
Motivation The xTool RA2 rotary is a great accessory, but it can be challenging to square the workpiece up to the RA2 rotation axis. Solution Design and print a fence to achieve the following objectives: Allow workpiece to be held square…
Magnetized dust collection couplings are not my original idea, but I was tired of searching for a model that fit the many unusually sized dust-ports in my shop, so I made this one parametric. Assembly involves gluing your magnets into the…
Modified from default caps to custom-made for 3d printer upper v-slot frames. I used it for my Creality Ender 3 v2 printer but it might work for other models too. Basic parameters: Dimensions: 210x210x72 mm Supports: not required Please…
NEW MODEL 03/25 with POWER BUTTON on the front ! Improved model with mechanical POWER BUTTON extension on the front. An again improved and redesigned body for better print quality. Fits on building plates of all PRUSA Mk3,MK4, CoreOne or…
Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and…
Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…
To edit the text in PrusaSlicer (you must be in Expert Mode ): Switch to 3D editor view Right click on the text to be changed. Select “Edit text”. Edit the text. Slice! For multi-color, add tool changes or filament changes at the desired…
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
I designed this picture frame in Fusion360 to be customizable, print support free, snap fit together easily and feature a storage spot inside for special items. It is intended to fit a 4"x6" or 100mm x 150mm photograph. I used a piece of…
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
I needed some clamps for an unusual PVC pipe I had laying around. So I made this design inspired by our local generic hardware store clamps. It's parametric and can be customized in Fusion 360. The minimum pipe diameter is 16mm. There are…
A simple, modern picture frame stand, with a low profile so that it is hardly noticeable. Fits most picture frames and works for portrait or landscape orientation. Can also be used to stand up signs and other artwork.
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…
Harley-Davidson Poker Chip connectable frame. Great for those collectors! chips are magnetic with thin metal in the middle There are pegs and holes on each side of the pieces to hold them together. These pieces connects together into a…
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
I broke the frame of my glasses a few months ago, and I've been wearing this 3D printed frame since then. I'm completely blind without glasses so being able to print my own frames make a big difference. Fusion 360 files included so you…
Low poly model of an egg (only the wireframe) Print instructions Use a brim (About 5 - 10 mm) Can be printed without any support (possible that some oozing has to be removed) Print with 0.15mm layer height For better results use the Layer…
I personally printed this at .10mm layer height, but any layer height can be used as the details are not too intricate, and the lack of sloped edges means that you will not have to use any filler primer to smooth out the edges. This was…
Info: well, I have jumped into the “remote holders contest” (for hiding them in a convenient way) too late, but I finished this model (and printed 😀) just on time design is parametric (see source file), so any book width/height is…
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Case to GL iNet Slate 7 router. You will need six M3x30 screws to assemble it.
Este es un juego de ajedrez completo para impresión 3D , diseñado desde cero en FreeCAD con un enfoque paramétrico , limpio y funcional. El proyecto incluye los archivos fuente originales de FreeCAD , lo que permite modificar fácilmente…
This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…
Recommended printing settings (or download gcode): Infill: 80%+ Brim = enabled Supports = Everywhere Orientation: see image This 3D-printed sawtooth frame hook is designed to provide a secure and stylish way to hang your artwork using…
German version Für Schubladen des Sideboards im Büro brauchte ich eine Unterteilung, wollte aber die Schubladen nicht beschädigen - nicht schrauben, nicht leimen, nicht dübeln… somit habe ich Halter konstruiert, welche mit doppelseitigem…
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
A simple 4x6 picture frame. My daughter needed a picture frame for a school project. Nothing too fancy, just glue or tape the picture into the frame.
Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like cables, scissors, precision pliers and probably many more. It is part of my honycomb skadis collection. It has a hex shaped pin to…
Features Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare) Holds the magnetizer/demagnetizer thingy Has a small pocket for carrying miscellaneous items, plus 7 more slots in the lid, where you can put…
🔒 Notice of Use This design is for personal, non-commercial use . Commercial use is not permitted, either digitally or physically . 📩 If you would like to obtain a commercial license , please contact me directly or sign up here:…
My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA…
I present to you fully parametric boxy things dispenser - update from my previous model now with view port and lid. You can use it for anything with boxy shape, I use it for dishwasher tablets. Saves space and I can't get over how…
The "Parametric Magnetic Hinged Box" is a 3D model made with FreeCAD. Designed with different needs in mind, it offers a hinged lid and magnetic fasteners for a secure close. It's versatile and perfect for multiple uses, like lunch boxes,…
Instructions For assembly you first need to print all three parts and proceed with the following steps: Grab the rotary part, an soldering iron and your two M4 threaded inserts. Install both inserts at both sides as seen in this video.…
I've used to have a lot tangled cables behind my computer, at my router, behind the TV, all of them of different diameters. To unplug one of them or to find out where the other end leads, used to be a nightmare (and a training in…
I shoot a lot of Instax, especially now that I adapted a LomoGraflok back to my Graflex SLR, and I like to scan the film for sharing or before giving away the unique physical copies after shooting portraits. I designed this frame to save…
An open 3d printed frame for Mini ATX (and a bit larger) motherboards. It is sitting on top of the PSU and has 30mm standoff brass spacers to allow for ventilation of the PSU as well as space to hide the cables. It features support for up…
Hallbar pull out frame For some reason I lost the pull out frame for my Hallbar 10L bin. This Frame is holding the bin bag in place. Ikea Germany don't have Replacements for lost Polypropylene Frames. So lets go and create a new one… It…
A waffle structure bowl! Easy to assemble and looks great in any place - can store decorative balls or fruits - depends on your liking. Print information: Recommended using a lower layer hight (0.15/0.2mm) and a smaller nozzle (0.4/0.3mm)…
Coat hangers for cars that lack built in ones. These are placed over the hand holds above the back doors and secured with a zip tie. As every car and zip tie is different, parametric FreeCAD models are attached where you can edit the…
A bracket to support the hive frames Una staffa per appoggiare i telai dell'alveare
The MK4 "x-carriage-back" was able to hit the frame hook of this part so I adjusted its width. After publishing this I found that a cable tie on the x-carriage cable outlet can interfere with this by about 1mm so I added…
Parameterized lube station for your mechanical keyboard switches or a simple switch display plate if you choose the cutout size to exactly fit Cherry style switches (14x14mm). How to print Orientation: Face down (no supports) Perimeters:…
Designed this on Fusion 360 for my brothers YouTube Channel and Etsy store. It will easily Hold 2 full bee hive frames. Different than other designs as it has a support facing frame flat edge that greatly reduces wobble when hung on the…
This print can be used to display award medals on a wall. It consists of two modular parts, a frame and a plate. There are two versions of each. The frame has both a simple version and a version with mounting slots to simplify attaching…
Parametric Xmas-Tree top is a simple, but effective example how to force 3D software to do modelling for you. User creates a basic 2D profile and then a Marionette network recreates it into 3D shape consisting of twisted NURBS extrusions.…
The shown rollbar frame was sliced using the standard 0.15mm settings from Prusa Slicer and printed using Prusament PETG. The left and right side were printed separately without any support. If you are advanturous, you could try the…
Remix-A-Stix are a set of parametric ball joints, sockets, and connectors, compatible with Mini 13/Lucky 13 ball joints (via 6mm ball joints) and Gunpla accessories (via 3mm pegs & holes). Dimensions and tolerances can be remixed using…
I wanted to be able to put my 32oz Nalgene bottle into the cupholder of my 2015 Hyundai Sonata so I designed this OpenSCAD to create an adapter for my vehicle. Hopefully others can use it to create files for their own vehicles or…
Frame your memories with love using our unique accessory, a heart shaped instant camera frame. Let each photo tell a tale of affection as it rests within the gentle curve of our Heartfelt Memories frame, adding a touch of romance to every…
I wanted to design something slightly more compact and easier to use than my original travel case with integrated stand. In the end: it's slightly more compact there is a version of the stand in which you can insert a 1€ coin to add…
A Tiny Temperature Tower A small temperature tower you can tune to your liking, using OpenSCAD's customizer. I've included gcode for the Mk4 with input shaping. If you'd like me to provide a specific configuration of temperature range and…
Display mount designed to hold small 2D printed art or other piece. We made this as part of our nativity art piece, but we found it could be used to mount and display many different things. It is even sturdy enough to support a mobile…
Add a touch of passion to your home or office with this BambuLab logo wall art! This creation has been carefully designed. It's the perfect accessory for 3D printing enthusiasts, technology aficionados, or anyone fascinated by the beauty…
