3,536 models
The green mat is 1 meter for scale. You can count frames to determine the speed it you like! The video is at 30 fps like all standard youtube videos. It covered the distance in about 1.2 frames, so it is going around 25 m/s, or 90 km/h. I…
Print approx. €0.45–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
2023-04-19 V3 - I am pleased to share with you the latest updates for the V3 model of 5/5B variants. Here are the key improvements that have been made: - The annoying PCB clips have been removed. - A clip has been added to the top for…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Organisateur de fiole de peinture à maquette, (pour fiole army painter, vallejo,...) -40 emplacements fiole peinture + 9 emplacements pour pinceaux -24 emplacements fiole peinture + 5 emplacements pour pinceaux
Print approx. €41.99–€51.32 excl. taxPreliminary estimate for one variant
Stranger Things coaster - HellFire Club Diameter : 100 mm Three versions : normal, negative, keychain 5 layers / 4 colors : First color (up to 2.3 mm) : black Second color (up to 3 mm) : yellow Third color (up to 4 mm) : red Fourth color…
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant
EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
I designed an extensive set of round-corner templates for woodworking. They can either be used to mark corners with a pencil or as a template with a flush-trim bit. There is a wide range of radius sizes from 5mm up to 200mm and 0.5" to…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET
Disc golf range finder that is a mini. I saw a range finder in the market and realized how simple the model was and so I recreated it from of that product, but I put it on a mini. I will look to add an instructional image on how to use…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Overview A rugged and reliable ammo storage box designed for firearm enthusiasts, reloaders, and range goers. Holding up to 81 rounds of 5.56, this compact case fits easily inside a range bag, making it a great alternative to flimsy…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. This is a simple fast…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The throwing knife has…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This is a pi zero 2w case Easy print and customizable Print instructions Recommended Print Settings: Layer Height: 0.20mm 25% honeycomb infill an 4 walls if you use zero bottom and top layer Required hardware: 4x 10mm M2 screws or 4 2mm…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The Saxe Knife has a…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
Overview A rugged and reliable ammo storage box designed for firearm enthusiasts, reloaders, and range goers. Holding up to 81 rounds of 9mm, this compact case fits easily inside a range bag, making it a great alternative to flimsy…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
As my first foray into complex 3D design, I created a custom deck box to house my “Gyome, Master Chef” Commander Deck for Magic: The Gathering. Modeled in Fusion 360, based on the Garland M43FTR restaurant-grade range. Features: Main oven…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. There are 3 parts to…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
Stranger Things Vecna from Season 5 To make him stand better,heat his legs with a heatgun and push him into a good position
Print approx. €4.17–€5.09 excl. taxPreliminary estimate for one variant
Panier de rangement 170x95 hauteur : 102mm
Print approx. €6.99–€8.54 excl. taxPreliminary estimate for one variant
Holds a WaveShare 2.7" NFC card that is used as a Data Range Card. Data is transferred from Strelok Pro Ballistic Calculator to the WaveShare card via NFC. Displays the distance, elevation and windage. Hardware Required: (4) 3mm x 6mm…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
source files are included, to add the hole where the cable passes through, or the covers of the letters etc. It is important to adjust the top of the letters, advanced settings: XY Size Compensation, apply -0.1 or -0.2 Which value to set?…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
mBot's are nice and affordable gadgets for kids to learn programming logics with Pyhton. The Ranger model has only one problem: The battery pack wich is only accessable by unscrewing the top, relies on AA batteries, so you have to replace…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
Einkaufchips die ich immer im Einkaufswagen stecken lasse, damit sich der Mensch nach mir im Supermarkt, darüber freut:-) Karmapunkte sammeln :-) 24.25 mm x 24.25 mm x 2.37 mm in der Größe eines 50ct Stückes. Zweifarbig, Black / Orange,…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. “At the middle of this…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
Lorenz(mod1) Strange Attractor Bead + Learned how to fix Skinned Converted curves to meshes. - First (Clean Up) Merge By distance .1 or .01 Then Fill holes (0) -always re-mesh after necessary subdivisions (think I used .03 voxel size)…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
J'avais lancé le BOOGLE (qui n'a pas marché et quand ça ne marche pas, il faut le dire aussi), sorte de boîte sphérique pour sa forme de base, avec une sorte de manteau en texture éponge. Mais il faut s'accrocher à ses idées, surtout…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Boite de rangement pour les buses de la MK4
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
J'ai créé ce rangement pour garder à proximité de l'imprimante le matériel de base.
Print approx. €7.32–€8.95 excl. taxPreliminary estimate for one variant
Where Your Earplugs Ride Shotgun. Whether you're clocking in at the jobsite, clocking out at the range, or tuning out the world on the go—the PlugBox is your earplug’s first line of defense. Tactical-Ready, Shop-Tested The PlugBox is a…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
V2.0 Available: This version has been superseded by V2.0 https://www.printables.com/model/1316493-echorig-v20-compact-molle-nametag-rangevault-serie This ain’t some novelty patch. EchoRig is a hard-wearing MOLLE-compatible nametag…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Petite rangement pour ranger ses carte micro SD, SD ou Clé USB. Ce range facilement. Idéale pour les trier.
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
No supports needed. Check out Orange-Clock.com for more Information or buy an OrangeClock here .
Print approx. €4.96–€6.06 excl. taxPreliminary estimate for one variant
orange cat
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
The original orange screamer sound like a jet engine or f1 car this 4 rotor version sound more deep just like a rallycar
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
supernova e3 pure 3 Dynamo mount for Velo Orange Porteur Rack made this bc i couldn't find anything i liked online. I'm not super experienced so very uncertain about its strength. Installing is very simple all you need is a few zip ties…
Print approx. €4.49–€5.49 excl. taxPreliminary estimate for PETGSource material: PET
support pour feutres de la marque promarker
Print approx. €5.78–€7.07 excl. taxPreliminary estimate for one variant
I wanted to have a mini laser rangefinder to carry along with my Zeiss Ikon Nettar and I didn't want to use the included mini strap, so I designed it to hold it and use it at the same time to properly focus the camera. My design was based…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Mounting hardware for range extender of DualShock 4 controller with universal DS4 zip-tie attachment. The long range capability can be done adding RC joystick module from https://github.com/ctu-vras/rcjoy . System is fully see-through and…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
Volantex Ranger 2000 Hobbywing Flyfun 40A ESC mount. ESC fixed by rubber ring from bicycle tube or nylon tie. See the pics and have a fun :) Print Settings Printer Brand: Prusa Printer: Prusa Clone **Supports:** Yes Infill: 60%…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Voici une petite boite pour ranger les cubes Animal du jeu Harmonies. Elle s'adapte à l'emplacement prévu dans la boite de jeu. Elle est pratique pour sortir les cubes lorsque l'on joue. imprimé avec la MK4IS. Support sous le couvercle.
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
A stand with a cutout for the charging puck(?) that comes with the Carbinox X-Ranger Watch (https://shopcarbinox.com/products/carbinox-x-ranger), designed to be printed with minimal supports while still allowing for the watch strap to sit…
Print approx. €4.11–€5.02 excl. taxPreliminary estimate for one variant
100x160mm sign, reading "Is it an 'art portfolio' or evidence of derangement?" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
TANK LONG-RANGE CANNON
Print approx. €9.43–€11.53 excl. taxPreliminary estimate for one variant
Petit meuble de chevet / bureau / salle de bain. Pratique pour ranger de petits objets (jouets, bibelots, gadgets, cosmétiques ...) Modèle dessiné en 30 x 30 x 20 cm mais réduit à 70% pour l'impression (soit 14 x 21 x 14 cm) pour être…
Print approx. €8.10–€9.90 excl. taxPreliminary estimate for one variant
Made to fit my 21700 4S2P Li-Ion battery , and utilise its dovetail to quickly mount it inside the fuselage. Flight time of that contraption is around 2 hours, and installation of battery takes a couple of seconds. Upper tray has…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
A hooded stranger, could be a cultist, monk, or just a cloaked traveler. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with…
This remix arranges the eight parts of the Elegoo Centauri Carbon Riser (originally STEP files) into a single print plate for easy printing. The STL file contains the pre-arranged layout. (Note: The STL may import as a single mesh in some…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Commercial use is NOT allowed for this model
Demogorgon (Stranger Things) - Relief Sculpture Infill: 5% gyroid Supports: NO Layer: 0.12 Feel free to download it too Vecna (Stranger Things) - Relief Sculpture…
The existing Hermione Granger Wand designs all look nice, but all of the vines have hard edges and I didn't care for that design. I set out to design a more organic version to have a custom model to sell in my Etsy shop. I'm releasing it…
Simple keychain from original Netflix series - Stranger Things. Logo and 3D model is my own design. This model is 2 colors project - black and red. I've printed from PETG - You can use PLA too but please change settings. Keychain size…
This is a simple case I designed for the Orange Pi Zero 3 . You will need to print the base and select the top cover of your choosing. Personally, I like the external antenna versions. Simply run the antenna wire in the slot above the SD…
Hello, Today I have Demogorgon for you - a monster from the movie Stranger Things. It is a really faithful copy of the famous monster from the movie. It is also suitable for coloring, or for a diorama with the theme of the upside down…
Design Concept This model draws inspiration from the iconic character of Will from the popular TV show Stranger Things, rendered in a cute, chibi-style figurine typical of Funko Pop collectibles. Purpose The model serves as a collectible…
Subscribe Now! Very good model from basti_vapes. Remix to no support free and printed. Time-lapse print video : https://youtu.be/MKl_LkOERvs Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…
Vecna (Stranger Things) - Relief Sculpture Infill: 5% gyroid Supports: NO Layer: 0.12 Feel free to download it too Demogorgon (Stranger Things) - Relief Sculpture…
UPDATE: Complete with Mindflyer and 2 figure stands. A 22-piece stand for the popular Stranger Things figures, with the logo in the middle.A 22-piece stand for the popular Stranger Things figures, with the logo in the middle. PLA 0.2…
Source: https://www.thingiverse.com/thing:455093 Summary This is a pocket sized turbo whistle or siren which emits a loud and extremely annoying WHEEEEEEEEEEE when you blow into it. This design was inspired by Instructables user Kiteman,…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Here is Fallout NCR Ranger Helmet Mask. Print instructions Category: 3D Printing
BACKGROUND More than 10.000, of 3D printed mini-sculptures have been handed out to world leaders, delegates and bystanders at COP30 Climate Summit in Brazil, Stand With Greenland Protest in Denmark, Munchen Security Conference in Germany…
Introduction This model was designed by my son for a 3D modeling course in high school. (He got 2nd place in the Senior Art Show!) It is his interpretation of the Demogorgon monster from the Netflix television series “Stranger Things”.…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Object Description: Orange peeler. Using the front side, cut the peel into several pieces. Lift it with the flat end of the peeler and remove the pieces. If you need a version with a lower cutting depth or any other modification, don't…
Stranger Things Silhouette Art No supports needed, the back slots into place securely. Print more than one back so that you can change the mood by changing the background. Make sure 'print thin lines', 'detect thin walls' or your slicers…
This is the small variation of the holder. Designed for small items. Print instructions Prusa i3MK3s 0.2 20% Infill Printed on the side without supports.
My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
This dog whistle has a frequency of 5200 Hz and therefore sounds deeper than my last design. This ensures an even greater range and better penetration of dense vegetation. Outstanding features: - very long range, - stable frequency, -…
Print-in-place toothpick crossbow with compliant mechanism. No assembly, fits 3 spare toothpicks, 15m+ range! Mini Toothpick Crossbow – Print-in-Place Compliant Mechanism (+15m Range!) This is a compact, incredibly fun, and functional…
Straight from the darkest dimensions, this model captures the horrifying appearance of the iconic Demogorgon. The figure stands in a disturbing, slightly hunched pose, its long, slender limbs and fingers outstretched in a gesture of…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
This is a the shadow monster (also known as the "Mind Flayer") from the Netflix series Stranger Things. He is challenging and will test the bed adhesion limits of your printer! No rafts or supports are needed but might be useful if you…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
This highly detailed Demogorgon-inspired horror creature is designed for fans of dark sci-fi and monster aesthetics. The model features: A dynamic attack pose Extreme surface detail for skin, muscles and claws A menacing flower-shaped…
I reworked the "Landy Mini" tire to use it for the Landy/Ranger 1/8. I would like to print the tires by myself, so I scaled the tire from the „Landy Mini by 3D Sets from 1/16 to 1/8. I reworked the tire to print it without support and add…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
🚀 Stranger Things Demogorgon - FDM-optimiert! Getestet mit Ender 6 + Klipper + Bondtech Direct Drive + 0,4 mm Nozzle 📏 Empfohlene Skalierungen Höhe Details Stabilität Druckzeit 6cm Filigran Sehr Gut 2h 12cm Optimal Perfekt 8h20 15cm Sehr…
Vecna bust Sculpted in blender using remesh method High poly model not optimized This is my first model for 3d print My print settings: Material: PLA Nozzle: 0.4mm Layer height: 0.2 Infill: 25% Tree supports: Yes only touching buildplate…
Lleva el vibe del Upside Down siempre contigo con este llavero inspirado en Stranger Things. 🚲✨ El diseño a dos colores resalta el logo con un contraste rojo y negro súper llamativo, perfecto para colgar en tus llaves, mochila o impresora…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Everything was measured on my own device. In case someone needs dimensions.
By request a Stranger Things Headphones Stand Prints in two parts and slots together Print the top with supports touching build plate and with detect/print thin lines checked. @3DPrintBunny
Power Rangers Morphers from TV show 1993
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
This is a case designed for the OrangePi Zero 2W it's made to be about as small as possible with clips to hold the wifi antenna inside the case. In the design I have included knockouts for a 14mm X 14mm heatsink as well as the GPIO…
from the series of the power rangers, here is the full scale model of the sword of the white power ranger, to be printed in full or in parts depending on your style of printer
My new dog whistle has a frequency of 6200 Hz and therefore sounds higher than my last two designs. Characteristics: - long range, - stable frequency, - handy and robust. I designed more dog whistles … Because individual dogs respond…
Gidday Wong, This should help with what your after. But please check the sizing suits your needs if you do take the challenge on and please post some pics, Cheers Jace
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Can grab from about 20mm to 37mm diameter, 10mm more range than the original model. Uses the same stock gear. The gear gets clipped in place before the Broom Holder is mounted on a wall. Once mounted the gear is completely captive. No…
As a fan of serial Stranger Things I designed collection of fridge magnets. All you need is magnet of this size: 5x2mm and a bit of superglue or there are types of models without holes and you can use magnetic foil. I used Prusa Printer…
A human with a short bow. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted archer…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
