3,828 models
News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…
Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)
Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.
This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…
A useful tool for removing prints from the bed with interchangeable 3D printable blades for when one eventually wears out. You can print the body in either PLA or PETG, however for the blade PLA is highly reccomended. To install the…
How about this scraper to replace your fingernails? This is a round design scraper useful 360 degrees. Compared with a spatula-shaped scraper, the amount of filament used and the time required can be greatly reduced. It is intended to be…
A scraper using simple razor blades which is not flimsy or imprecise. The blade is held firmly in place. Please be careful when inserting the blade. Strongly inspired by https://www.thingiverse.com/thing:2024019 Use razor blades such as…
Big brother to the mini bed scraper =) Print in PETG and it's almost indestructible. https://www.printables.com/model/55519-bed-scraper-fast-print-15min-minimal-filament-usag/comments/420863
A small hook that rests on top of the PSU and hooks around the frame. Perfect for a scraper or something else that you want in short reach. Sporting glorious hexagon cutouts and a hexagon-shaped hook it is a perfect compliment to all…
Low Poly Howling Wolf (Scraper Holder / Decoration)
Inspired by the HexScraper and designed for the pocket tools challenge. With this pint-sized pocket pal packed in the pocket of your poncho, you can plunder PLA any place! Particularly if you are prone to placing piles of plastic pocket…
Paint on supports on the front edge, the rest of the model does not need supports. Orient the model so that the tab on the top the hexagon is facing up. The tab has been removed from the bottom of the model so that it sits flat on the…
CIUNCARELLO Voronoi boats a distinctive design that sets it apart from conventional bed scrapers, making it one of the BEST Accessories for your 3D Printer. It features an additional circular ring at the back which serves a…
Clean bed. Fresh start. The Minimalistic HexScraper is a compact, one-piece scraper for removing filament remnants from your 3D printer’s build plate. A central grip keeps the tool close to your hand, while the hexagonal shape provides…
Minimalistic heatbed scraper for smooth PEI or textured steel sheets. I recommend printing in PETG for better durability. Works with all print settings and filaments. My print settings: PETG PrusaOrange 0.15mm Quality 15% Infill 2…
As mentioned above, this handy tool helps you effortlessly remove your 3D print from the heat bed—because let's be honest, nobody enjoys the struggle of peeling off prints like they’re stubborn stickers. It’s also a lifesaver when your…
In need of some plastic scrapers to remove old gaskets from a motorcycle motor without damaging the mating surfaces, I didn't have any good options around. But, that's an easy problem to solve. I quickly drafted up four versions of a…
Hey, I was just trying tolerances with hexagon, but I found out I really like how it looks, so i printed more hexagons and I think it looks great. Of course all credit to author of HexScraper, I just made little modification.
My suggestion as a mechanical engeneer for a printbed scraper. Ergonomic position for the finger (fingerprint). Satisfactory grip size. Special slot for nailing. It prints in 1h 35m.
Puppy Helper that can hold small items like keys, cards, and more!
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…
Wargame SkyScraper Building (Roof Updated/Fixed) The empires of the future won't be lived in caves. Quick assembled cities in the desert, made from plascrete, reinforced by plasteel. This is where the wars will be fought. This is where…
Intro Winter returns back to the northern hemisphere… Cold days and frosted cars are back… Car owners need a good and stable ice scraper now. And this is exactly what this model delivers! Why you'll love it? Print is done really easy…
3D Printed Mini Bed Scraper (Ultra-Lightweight & Functional) Looking for the perfect project to use up those last few grams of filament left on your spool? This super small, 3g-only bed scraper is the ultimate functional print for every…
Tired of scraping ice with a boring old scraper? Upgrade to the Red Devil Ice Scraper and watch that frost disappear faster than you can say 'hot damn!' Sacrifice some high-quality filament such as bloody strong Modified PLA, ASA or PETG…
Drapeau de sécurité Carabine Ce drapeau indique que votre arme à feu est déchargée et ne présente aucun danger. Avec sa couleur orange, cette étiquette est très visible et rassure l'ensemble des personnes présentes et les autres tireurs.…
My other new print holds the scraper better. Use that one handle for plastic scraper blades
Shawn's original Scraper & Double Razer Blade model includes a very nice handle, but it was slightly narrow for my blades. Originally I simply scaled his up by 2.5%, but I was printing multiple handles and decided to flatten the model so…
A simple yet effective tool designed to make cleaning your 3D printer build plate faster and safer. The flexible handle provides just enough give to help remove stubborn print residue or thin first layers without damaging the surface.…
The same great HexScraper , but now with more magnetism! The embedded magnet allows you to hang the scraper on a metal surface, such as a metal desk or the PSU on the side of the MK3/S/S+. The magnet pocket is sized for a 9.5mm x 3.2mm…
I know there are similar bed scrapers here but I wanted my own one I designed so here it is feel free to use it and make remixes
ice scraper in knuckles no suports needed
A pentagonal trapezohedron, a popular shape for 10-sided dice. Dimensions are based on adding pentagonal pyramids to a regular dodecahedron.
Innovative multi-purpose accessory with a beautiful design and functionality. With the replaceable spatula and brush, you can print them whenever they wear out, avoiding the need to reprint the main body. This will save you time and…
Hier ein Satz Druckbett Schaber in 3 verschiedenen Größen. Ich habe diese in PETG gedruckt. Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen. Here's a set of print bed scrapers in 3 different sizes.…
Quickly mocked up this v1 scraper to mimic a certain brown spoiled cook scraper. v2 will be closer to the original dimensions
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! This Multi-Tool Keychain is the perfect compact accessory for everyday use. Measuring 60x35x3 mm , it packs a lot of functionality into a small and…
Dobré ráno, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás velmi šikovnou škrabku Bambulab na postel. Docela efektivně odděluje produkty od skla nebo PEI textur. Tahle verze je pripravena na barevny tisk, ale protoze me…
It requies some little file work to match correctly base-heads. Sliced with Cura 5.6.0. Supports needed.
I only removed the sides of the HexScraper and scale it down to fit the same siza on the extrusions of the Prusa Mini+. Works well together with the Prusa Mini Hook for scraper tool .
Strengthened roof and pillars with tire finger grips and a hex make-over. Now it's a strong, stylish, and useful tool.
The "Printed Scraper" 3D model is a versatile and practical tool designed for users who need an efficient solution for scraping or removing material from surfaces. Whether you're working with printed materials, surfaces requiring…
Sealant Scraper Tool - Thumb or Finger Replacement Part :) Keep your thumb or fingers free from sticky sealant when you finish it after application. The corners are identical for each provided tool in the range of 9 to 25 mm in diameter…
A Mini Scraper version 2 with an embedded 6x3 mm magnet. If you use the provide Gcode for a Core ONE it will stop at the layer needed to insert the magnet. If you aren't using that you can easily add a pause in PrusaSlicer. I used a 30%…
Features Two different length for wider and narrower glide surfaces. No tapered eges for better durability. While scraping one will tilt the scraper anyways. Two rounded corners with different radii to scrape grooves in cross-country…
remove ice without removing gloves, ergonomic design for a comfortable grip and double face to scrape or break ice from car windscreen and more
Dive into the world of de-icing with this unique windshield scraper! Inspired by the robustness of a backhoe shovel, this scraper is designed to tackle the toughest winter conditions. Its ingenious design offers an extended de-icing…
This two sided tool is used by my artist wife to create textures and scrape on her canvas. I put one in my tool kit to occasionally use as a probe or scraper in tight spaces. It is printed in PETG with organic supports.
Printed PLA, 60 mms, 6 walls, 6 top and bottom, printed with Beefy name down.
Druckbett Schaber Prusa Für die Fans des Prusa habe ich einen Druckbett Scharber entworfen. Viel Spass damit. Print bed scraper Prusa I designed a Scharber print bed for Prusa fans. Have fun with it
I managed to break my freezer scraper, so I decided to make couple in Tinkercad. The text acts as a grip when it gets wet. I've included the colour change .gcode from Prusaslicer.
Print using filament or resin. For FDM, use a 0.25 mm nozzle with a layer height of 0.05 mm. Then glue the two parts together, followed by the legs. UPDATE 11/18/2025: I modified the de-icer legs to simplify gluing. Instead of gluing four…
One blank version and one with a snowflake. Use your slicers build-in functions to add your personal touch with it! The pre-sliced has 25% infill
Dies ist ein einfacher Fugenkratzer, den wir auf unserem Balkon benutzen. Der Griff ist angeschraubt, so dass man den Kratzer bei Abnutzung austauschen kann. Zusätzlich werden benötigt: 2 x Zylinderkopfschraube M4 x 18 mm 2 x…
There's a lot of scrapers on printables.com - but this is my version. As always, there's a balance between higher heat (promoting better layer adhesion) and lower heat (reduced stringing, especially with PETG). For me, scrapers should…
By far my most used print is my HexScraper. It's a fantastic tool that I know won't damage my print bed. However, I kept losing the damned thing! This is a super simple attachment that just plugs in to the top of your MK3 Z axis holder…
Hier ein Satz Druckbett Schaber in 3 verschiedenen Größen. Ich habe diese in PETG gedruckt. Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen. Here's a set of print bed scrapers in 3 different sizes.…
I designed this Gridfinity bin to organize my small woodworking shop. This 1x4 Gridfinity bin holds the Hongdui Glue Scraper and the included tool used to change the cutting blade. The bin has no stacking lip but holes for magnets on the…
Introducing the Game Changer in Winter Car Maintenance! Say Goodbye to Manual Scraping with our Electric Ice Scraper. Are you tired of waking up early to battle the frosty windshields? Have you struggled with traditional ice scrapers that…
Printbed Scraper that uses a 85x54mm plastic card. The plastic card can be replaced without tools and both sides can be used. The advantage is that the plastic card is harder then printed structures but soft enough to make sure there is…
As a child in the 80s, I remember scraping ice off car windows with a broken cassette tape case. This model is a throwback to that era, modeling the general shape of a cassette case half. A silhouette design of a cassette B-side covers…
It's a mashup inspired by Low Poly Buddy and Frog Hex Scraper. I think most of us agree hex scraper is probably a bit better than default printables scraper, but wanted something very on-brand Prusa. I like the way this grips better than…
Holder/clip that snaps to the frame of the MK4 to hold scrapers. Print 2 to hold the scraper straight. V2 - Reduced the width slightly so it is more snug to the frame.
Perfect fit for all automatics coffe machine, for cleaning coffee waste.
Printed at Bambulab A1 mini with black BambuPLA. I made a scraper V2 with unnormal shape for quality, efective and economical print. For better strong if you dowlownd stl. version set the Vertical shells Perimeters for 4 and infill for…
This is a holder for the Hex Scraper: https://www.printables.com/model/122894-hexscraper-printbed-scraper It goes on the back of the printer frame just above the electronics box, using two holes already in the frame. It's secured with two…
With this tool, de-icing windows becomes a real adventure. Thanks to the handle, the "Rotating Scraper" can be held easily and stably, and the blades can be rotated with the other hand. This means de-icing in the early morning is finally…
Meet the Sled Ice Scraper – your winter companion for effortlessly conquering frosty challenges. Its sleek design and ice-busting prowess make winter woes a thing of the past. Embrace the frost with style and efficiency! ❄🚗…
Beehive trapezoidal vent duct closing/sealing for winter season. Update 2 Mark 3 version with two sided angle is available. Update The first version of the plug has not got the proper trapezoidal shape on the side. The second version has…
my model is the first one I have ever made would you mind liking and sharing it to any friends who have a 3d printer
Use these covers to hide the ugly support brackets which are used on several models of Forest Drapery tracks. The bottom portion of the cover fits under the bracket against a wall which is screwed in place during installation. The top…
BORING Scraper - Set For your bed scraping needs and more. We designed them for removing stickers and stuff from your buildplate, while being exceptionally easy to print. Design Cheap but competitive. Our design goal was to print these…
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…
About the Scrapers: With a length of 86 mm and a thickness of 5 mm, the scrapers are very compact. The grooves on the side of the handle provide a firm grip. The angle of the front wedge is 26.6° and is therefore quite robust. Of course…
Dieser Bed Scraper ist das ideale Werkzeug für alle, die ihre 3D-Drucke sauber von der Platte bekommen wollen. Es wurde speziell entwickelt, um das Druckbett vorsichtig zu reinigen und fertige Drucke sicher zu entfernen, ohne die…
It's -8℃ currently where I am. I needed a new ice scraper. It's strong and I've gone through several iterations to get it to feel comfortable in the hand. There are ribs along the handle for better grip as well as a large indentation at…
News 2024-04-04: Upon request, I designed an XL version of this scraper with 30% longer blades: News 2024-03-10: Please also check out my new Blade Dispenser for this Bed Scraper: Optimized Bed scraper with replaceable blades Since the…
This innovative tool simplifies print removal with its user-friendly design and unique features. The random pattern design ensures fast print times. No supports are needed, as the model will print fine without them. Durable and reliable…
CIUNCARELLO boats a distinctive design and features that sets it apart from conventional bed scrapers, making it the ULTIMATE Accessory for your 3D Printing needs. 8x6mm Magnets are strategically placed at both the front and back ends…
This is a useful Blade Dispenser for my new Optimized Bed ScraperXL with replaceable blades. The dispenser holds 44 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the…
Note added Oct. 5, 2021 : As some people have had problems printing this without infill, I have added files for 15% rectilinear infill. This scraper can be safely used on the build plate with little danger of scratching or gouging the…
PLEASE READ THE PRINT INSTRUCTIONS! TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS! After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be…
A quick but sturdy print bed scraper that's intentionally long with open infill so that you can also use it to swipe at the purge material. It will catch in the infill and drag away cleanly. To fit the Prusa Mini use the 3mf and scale to…
Description Tired of struggling to remove prints from your 3D printer bed? This ergonomic and durable bed scraper is designed to safely and efficiently lift prints without damaging your print surface. Whether you're using PEI, glass, or…
ULIMATE Print Bed Scraper/Windshield scraper wide and narrow versions! print at 0.16mm layers or less for best edge. Don't forget to- like share print and follow!
BOM: Printed with ROSA3D Starter PLA Black Ditch the dangerous metal spatulas! This 3D printable plastic scraper is the perfect tool for safely popping stubborn prints off your build plate without risking deep scratches on your PEI,…
🔥 UPDATE: V2 NOW AVAILABLE! An improved version (V2) featuring new side-grip grooves for better control is now out! 👉 Get the new V2 version here: This is a bed scraper / print removal tool designed to safely and efficiently remove prints…
Anyone who has a Bambu has a love/hate relationship with the Scraper tool. It's awesome. But it sucks because they give you a magnet for it that has to be the weakest magnet known to man. Plus is a aluminum printer… so? Anyway, the…
I really like the Prusa spatula for its aesthetics and low filament consumption, but it could still be better. Enter the Prusa printbed scraper 2.0. I've reduced the material even more by cutting out triangular sections in the handle and…
The Micro SD Ejector is great, but I kept losing it because it's small. I Used Tinkercad (because I'm a simpleton) to add the ejector to the scraper. Printed at .12mm and 3 walls, takes 18 minutes and uses 3.79g of filament.
I was about to make the beloved hex scraper (since the one that came preloaded on my X1C was kinda garbage) but I thought to myself why should I print a nice scraper if I'll have to print a full one again every time the blade goes bad.…
Simple printbed scraper with Flashforge logo. Must have tool to remove stubborn prints and/or purge lines from the printbed. Layer height:0.12 Shells/walls: 3 Infill: 15%
Ice Scraper for Car – Durable Winter Tool This sturdy ice scraper is designed to clear frozen car windows quickly and efficiently. Its ergonomic handle with a reinforced grid structure ensures strength while saving material. The wide…
This is a low-profile bed scraper designed for safely removing 3D prints from build plates. The ergonomic handle provides a comfortable grip while allowing precise control during print removal. The scraper features a wide, thin blade that…
Prusa bed scraper inspired by the iconic Prusament spool design. Perfect for safely removing filament residue and prints from the build plate Check out these cool things too!
![Voronoi Printbed Scraper [1]](https://media.printables.com/media/prints/737707/images/5772672_ef8c4e62-fc12-4c5e-bcb5-0f7a36c450e2_6bd86078-9676-4171-8e9c-10e79ac52952/dsc01584.jpg)
