173 models
I was designing a housing for a RaspberryPi 4 and wanted a simple reference model to design the housing around, so I created this. For me it worked great, the real RaspberryPi 4 board did fit like a glove to the designed housing which is…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
See: https://github.com/prusa3d/Original-Prusa-i3/pull/172
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Just a little case for the Pimoroni Inky pHAT (with RaspberryPi Zero). The case can be clicked together without any screws. The camera port, the SD Card and the two USB Ports are accessible, however, the HDMI Port is inaccessible. Print…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
This strongly cooled housing is made for a multimedia center application and allows the RaspberryPi 4 to stay cool even at extensive load, like when playing 4k video. It is made to hold the RaspberryPi 4 itself, a 5V DC-DC buck converter…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for PETGSource material: PET
RFID scanner/writer for PC/Mac - based on Raspberry Pi zero and RC522 RFID. A quality USB RFID code reader/writer costs over $220. This system costs less than $20. You will need: Raspberry Pi Zero (W) RFID-RC522 expansion module Pi Zero…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
Description This drawer replaces the original drawer shipped with the Ender-3 V2 Neo to accommodate a RaspberryPi 3B. There are mounting points for the Raspberry where it can be placed onto, as well as a opening in front to get cables…
Print approx. €6.31–€7.71 excl. taxPreliminary estimate for one variant
This is a case to hold the RaspberryPi 3B+ along with a 30mm or 40mm fan, and can be mounted to the Prusa Mk3 frame, or can just sit somewhere. It has been designed to accommodate the Noctua 40x40mm fan (which is silent compared to other…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
The existing models to attach a MLX90640 to a Raspberry Pi transform the whole setup into a thermal camera. I wanted to use the camera while allowing the Raspberry Pi to have other uses as well, therefore created this detachable cam…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
This is a wall mounting plate for Raspberry Pis. I needed a version that would allow passive cooling, protect from dust and look cool. This model can be easily printed in PETG or PLA with 0.3mm layers. There is enough room to take the…
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for PETGSource material: PET
This case is ONLY for raspberry versions with tower and NOT interlocking so don't print it if you don't have a tower because the holes and alignments are custom made. That said for those who want to print it get in addition to the files…
Print approx. €2.25–€2.74 excl. taxPreliminary estimate for one variant
I wanted to add a BMEx80 to a RaspberryPi Zero and have it displayed in my house. The great model from adafruit was doing part of this so I modified it so I can attach the sensor.
Print approx. €3.84–€4.69 excl. taxPreliminary estimate for one variant
I designed a cameraholder without the need of screws to hold the camera. It fits for the standard Pi camera and spin offs. There are different angle models available. You can print it at 0.1mm without supports.
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
This is frame and cover for adding Waveshare Ethernet/USB HUB HAT (B) to RaspberryPi Zero as Host for MK3. This can be used mainly for PrusaLink with USB Cam. Frame is designed for both RaspberryPi Zero and RaspberryPi Zero 2.
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for PETGSource material: PET
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
Printable 40 pin connector for RaspberryPi. You just insert separate cables (goldpin connectors) inside, put locking bar in and voila. You made yourself a working 40 pin connector and got rid of single plug cables. Never connect to wrong…
Happy 10th anniversary to the Raspberry Pi! Description This is the Case for the Raspberry Pi 4 B. There are 2 types of top covers. Slot-in I/O cover type. Cut-out I/O cover type. There are 3 types of bases parts. with tabs (for wall…
Had someone ask me to build a Simpsons TV but larger than ones already online. So after some searching I found the 3.5 inch version to be best for my needs and scaled it all up to 1.712 then added some brackets to the front face to fit…
RaspberryPI 3 Case, Small case for Prusa i3 Frame. It did attach to the frame with one screw only, the cover has two hooks to help keep the case centered. I did attach two top's, one clear and one with electronic skin that will help…
Compact 3D printed Raspberry Pi case designed for APRSBox and ham radio station use. Compatible with Raspberry Pi 3 and Raspberry Pi 5. The case uses M3 screws, with M3x4 countersunk screws required from the bottom side. Do not use longer…
Wanted something that would not only store but displays my spare Pis. Works for tinkerboards and Pis. Each box holds 5 boards. no supports required. It's a very basic design so I'm sure there are other things it can hold, but my main…
A case for a raspberrypi to mount on a din rail.
Happy 10th anniversary to the Raspberry Pi! Description This is the Case for the Raspberry Pi 3A+. There are 3 types of top covers. Slot-in I/O cover type for fans. Cut-out I/O cover type for fans. Cut-out I/O cover type for heat sink.…
Yet another RaspberryPi Rack Mount This is the latest iteration of my raspberry pi rack mounts. It fits nicely into 19inch racks. The triple mount has no active cooling, but enables you to easily pull out the Pis now and then to replace…
El diseño es un case compacto y funcional que alberga tanto una Raspberry Pi 4 como una placa BTT SKR E3 Mini V3, con espacio adicional para ventiladores para mantener una adecuada refrigeración. El case está diseñado como print-to-place…
This is a Case designed for a raspberry pi Zero, an NOIR camera module from Piomoroni and a 40mm 5V Fan. For assembly you need: 4 screws M2,5 x 8 for the front plate assembly 4 screws M3 x 15 for the fan assembly 4 screws M2 x 12 for the…
Gehäuse für Raspberry Pi Zero 2w im ikonischen Mac mini Design. Gedruckt wurde er in einem Bambu X1C mit zwei Farben. Für alle die nur einfarbig drucken können, habe ich das Modell mit einem eingelassenem Apple Symbol gemacht. Der Fuß…
I designed this case for my Zynthian project. The electronics is partly derived from the V5 with an illuminated and 3D printed button matrix. The needed circuit information is on the Zynthian forum and github pages. I handwired it…
raspberrypi5 + x1002(nvme adapter) + official pi5 cooler + NVME heatsink(from aliexpress) x1002 standoffs and flathead screws were not used, you need M2.5 SHCS longer than 10mm Raspi reset button can be pushed on the case. The case…
Print face down with PETG or PLA. Cutouts for the inserts are 4.3mm which is what my template calls for on my printer. Takes M3 heat-set inserts on the inside of the mount. Otherwise, all the other build instructions and variations on the…
raspberrypi5 compact case with 2mm thickeness + x1001(nvme adapter) + ssd1306 case + official active cooler m2.5 flat nuts(x6) and 16.5mm standoffs(x3), which containing in x1001 Jan 28th, 2024 - SSD1306 was moved through other side, and…
Right Side - RaspberryPi 4 Rack Mount No Screen No Supports With Or Without USB Passthrough Left Side https://www.printables.com/model/211251-19-raspberry-pi-34-rackmount-with-13-oled-screen-p Shout out to Freddy for the amazing model!…
This is remix of the Case for Raspberry Pi model B+ and 2 B for raspberypi3 , the only change is that the LEDs on the raspberrypi 3 are on the other side of the board, this design takes that in to account. You can use the openscad file to…
Remix of https://www.prusaprinters.org/prints/24812-hyperpixel-40-pi-4-case-with-screen-cover/files with improved cooling. Print with supports under the screwholes.
Tray can be found at: https://www.printables.com/model/1092227-10-rack-modular-tray-system-for-raspberrypi-tray
RaspberryPi Foundation official Pi Zero case support parts for Tripod 2 Type!! for RaspberryPi Foundation official Pi Zero case for Original Ultra small Pi Zero Case See this site for more information. Sorry, This site is Japanese only. (…
Raspberry Pi 3 case, requires no screws. The two parts snap together. Models: RaspberryPi 3B+: Works perfectly. RaspberryPi 3B: Works perfectly. RaspberryPi 3: Works perfectly. RaspberryPi 2: Should fit. Feedback? RaspberryPi B+:…
Modules can be found at: https://www.printables.com/model/1092236-10-rack-modular-tray-system-for-raspberrypi-raspbe
Case for Raspberry Pi with LoRa/GPS hat. not waterproof, designed to achieve the smallest possible dimensions Print instructions Printer Brand: Original Prusa Printer: i3 MK3S Supports: No Resolution: 0.2 mm Infill: 15% Filament:…
Basically just needed a shorter version of this. Having used the original 40 way design a couple of times (it works fantastically), I needed to hook up a waveshare 35a display. Turns out the plug body is perfectly fine for holding pins as…
RaspberryPi Foundation official Pi Zero case support parts [Support parts correct positioning of the camera module] PiZeroOfficialCamera_Spacer [Support parts blocking 40pinI/O hole] PiZeroCase_HoleGuard See this site for more…
I have added this remix to fit my rarely used Rpi. It's tight fit, and if needed I can connect cables already on the mount without affecting heating. I have added some aesthetics for looks, conservation of material, time of printing and…
I have a Raspberry running OctoPi on all my 3D-printers. To have a camera as part of the setup is a must in my take, to be able to have an eye on the ongoing print once in a while. The cheapest and easiest to install camera is clearly the…
Right Side - RaspberryPi 3 Rack Mount With Or Without Passthrough Left Side https://www.printables.com/model/211251-19-raspberry-pi-34-rackmount-with-13-oled-screen-p V2 is now stronger, also includes a version without pass threw. If you…
This RaspberryPi Case for an Anycubic i3 Mega S was adapted and remixed from Raspberry Pi 3 Case without Vesa mounts and Raspberry Pi case with Pi Camera for CR-10 . It uses a RaspberryPi 3 with OctoPi and a MakerHawk Raspberry Pi Cam…
Use case If you would like to add a software controlled 30mm fan to your RaspberryPi 2B or 3B, this design is for you. It builds on top of the excellent design from Malolo. Printing Both parts can be printed easily in the uploaded…
using x1001 containing M2.5 flat head nuts.
RaspberryPi case that looks like the NZXT H510. Use a small piece of plexiglass or clear plastic for the side panel. Compatible with some heat pipe with fan coolers out there. Use a 16mm Pushbutton switch for the power button.
The fuzzy skin settings for my print is: Fuzzy skin thickness: 0.2 Fuzzy skin point distance: 0.2
This is a Case designed for a raspberry pi Zero, an NOIR camera module from Piomoroni and a 40mm 5V Fan. The used PI Camera Module: https://shop.pimoroni.de/products/night-vision-camera-module-for-raspberry-pi The 40mm 5V fan is…
I found Ben's "Pan/Tilt" project ( http://www.thingiverse.com/thing:314027 ) and wanted to print one and actually make it work. After a few emails back and forth to track down parts and get some guidance (THANKS BEN!) I finally got it all…
Dovendo inserire in un mobiletto il mio progetto con RaspberryPi, ho realizzato questa cornice per il suo display LCD touch screen da 3,5". Lo spessore del mobiletto è di 6 mm ed il display è fissato alla cornice mediante 4 fermi e viti…
The thing calls for m3 screws that screw into the bottom case, well the holes for the pi3 are too small and I didn't want to force it. So I added room for m2.5 nuts and screws. I also reuploaded the top case for convenience. That way you…
Here’s a design for 2 Axis RaspberryPi remote IR camera module. The design went through several adjustments, but at the current stage, everything snaps together quite well with some room for improvement (described briefly in ‘Todo’). The…
Simple bracket for PiZero(2) and BananaPi M2 Zero with threaded inserts. You can add the modified DIN-clip to put it on a DIN-rail, use it without the clip or just 3M VHB tape. Choose the needed Version below, M2 is for M2 threaded…
I designed this thing to put my raspberry together with my 7" touch-display into one case without having all cables separate on my desk. These are the parts I bought to get the case as compact as possible:…
Printed in PETG 0.2mm layer or 0.3mm layer height , 15% infill , 2 screws required to join case around 2.2mm diameter by 11mm long , fan would require M3 x12 button heads to secure
A simple Raspberry Pi Camera adaptor for the Bresser 114/500 Telescope. What will you need? Raspberry Pi Zero Raspberry Pi camera module (with 15cm ribbon cable) 4x M2,5 Screws 4x M2,5 Nuts 3x M3 Screws 3x M3 Nuts 3x M3 square Nuts 2x (or…
Modified the screen cover for BTT PITFT50 2.0 screen
Just narrowed the gap between the breadboards so that I could use this design with a RaspberryPi Pico.
My contribution to 10" MINI RACK at https://github.com/geerlingguy/mini-rack Compatible with https://www.printables.com/model/358304-fully-printable-half-width-server-rack-and-trays rack My requirements were: open panel for ventilation…
Switch panel to control power to RaspberryPi for Octoprint, printer lights, and printer power. This, along with the mounting bracket is designed to tuck in the corner of a Lack Enclosure for the MK3/S. Hope you find it useful. Let me know…
This is remix of the Case for Raspberry Pi model 3 B+ , the USB ports and ethernet have been reversed, the full size HDMI has been replaced with 2 mini HDMI ports, and the micro USB has been changed to a USB-C port. You can use the…
Hi here are my files for my portable project : RaspBerry Pi4 + Aftermarket 7" touchscreen. It is designed for usage with this display: https://amzn.to/43A3qyw Rotary Encoders: https://amzn.to/406pzBy PTT Button 19mm:…
I made this model for creating new cases and rack fittings. It helps a lot!
I wanted a Plex media server and had a RPi 4B from another project. Because an external SSD is far better than HDD or SD card, I made the Pi boot from it and also store the movies/TV shows on the SSD. Now all I needed was a case so I made…
I loved the original snap together design, but wanted to add a fan to help with the heat. So I made the top of the case taller which allows for a 40x10 fan. Also cut a hole to expose the gpio pins to allow for DLSR time lapse snapshots.…
The Qidi X-Max has enough free space in the electronics "compartment" to mount a RaspberryPi. But it has to be mounted upside down - something which can be done rather easily with self-adhesive Velcro tape. This has the benefit of being…
RaspberryPI HQ camera mount for BlueROV 2
I modify the original bracket and make it suit for rasp and btt pi
This is a case for a Raspberry Pi 5. It is compatible with the official active fan (file bottom) for use with NV(file bottom)Me Hat (Geekworm x1003). (file bottom2) for use with official NVME Hat+. (The Raspberry Pi must be secured with…
"Raspberrypi Touch Display 2"-Holder for 10inch Rack. FreeCad-File attached.
This models have the following features: RaspberryPi5 mount for modular 19" 1U Rack by @Robert_28442 Compatible with Waveshare PoE hat: https://www.waveshare.com/poe-hat-f.htm Compatible with Pimoroni NVMe base via custom spacer (needs 2x…
mount for raspberrypi 7" print 2 holder and 1 cover use 4pcs m3x10 and 2 pcs m5x25 the on/off cover has an opening for power cable to the raspberry i used this one and print this https://www.thingiverse.com/thing:1585924 If you like my…
This is a quick 'n dirty camera holder for streaming via Octopi so that it is at a good angle to keep an eye on my MP Select Mini printing. The camera angle can be adjusted from 0 to 50 degrees. Print instructions Category: Camera Summary…
This is a knob for holding your raspberry pi 4 case on the Multiboard/Underware cable managment system. you can choose if you want to hold you case by two or one knob, the designs for both cases are slightly different. you need a…
This is just a remix of numerous different covers (Main inspiration was the design by NeoHeldt) for the raspi/arduino camera. I ran into a lot of models and anytime I printed them the holes didn't always line up with the camera circut…
This is a solder less macro keyboard using the QMK Firmware. There are two versions flat and angled. You only need one of the bottom pieces. You need: 1x RaspberryPi Pico 6x Standart 6mm Micro Switches (There are cheap packs with multiple…
4x M2.5 Einpressgewinde 4X M2.5 Abstandhalter 4x M2.5 Schraube 4x M2 6mm Schraube für Oled Dispalay 1x 12mm LED Knopf 1x 60mm Noctua Fan 13x Jumper Wire X825 V2.0 NAS Board Raspberry Pi 4 1x SSD/HDD 2x 4mm Acrylglas 100x200mm 1x 60mm…
SKR1.3+RaspberryPi electronic box
Mounting option for a RaspberryPi to a DIN-rail. I'm using it with a Pi4 with armor case
https://github.com/manbehindthemadness/MavPi
Podvozek pro robota raspberryPi sledující černou čáru pomocí webkamery.
This is a remix of Suraki's RasPi case (https://www.thingiverse.com/thing:710688), with an additional version for OctoPi Octoprint servers. There are locating holes on the logo pieces that match locating pins added to the case tops. If…
https://github.com/manbehindthemadness/MavPi
You neeed heat inserts for mounting the pi. The case has holes in the bottom for screws. The cameraport and GPIO Pins are accessible.
I wanted to add a PINEBERRY PI HatDrive! Bottom to my RPi , so I had to move the ports up.
A clamp to hold a cell phone
This model is suitable for a Raspberry Pi 4, which can be perfectly integrated into a 10-inch (25.4 cm) server rack thanks to the attached plate. A special feature are the two holes to the left of the Raspberry Pi holder, which are…
It ads to the snap fit RaspberryPi 4 Model B Case from Malolo a “backpack” that houses a M.2 2242 SSD with adapter and USB 3 connector. It screws on at the bottom of the edited z_bottom_base_sm mesh. i use the RASPI4 for astrophotography…
A widescreen case for a RaspberryPi Zero
i needed a case for the raspberrypi zero. i didn't want to use screws, so its snapfit. it doesn't require any support. the parts are already rotated in the right direction. it took me a lot of time to make this, so I hope it works for…
The CSI camera for a Raspberry PI will slot into the camera mount which then sits tilted forward 15cm above the surface. It is intended for a camera connected by the CSI ribbon cable to a rPI Zero on a MK3 Prusa. The CSI cable exits from…
This is my first version of a RetroPie portable handheld. It measures 185 x 90 x 26 mm. It's designed around a Raspberry Pi zero 2 w and uses mostly off the shelf parts: -4.3" LCD TFT Display( easily found on Aliexpress). Connection to…
An enclosure for a Raspberry Pi 3 or 4 (there are different models for both) running Octoprint . There is a slot for an 8 Neopixel strip and a 16mm button . I used the Adafruit Neopixel stick in particular since I found that the ones I…
This is a case for a RPi Zero (2) cam running off of a PiJuice battery hat. The back plate is in TPU to allow for a bit of flex for button pushes. I have not tested it in PETG though it might work. As the case is printed out of PETG and…
PiHouse - RaspberryPi + Arduino case Components: RaspberryPi 4 Arduino Pro Micro LLC (5V <-> 3.3 V) 5’’ HDMI screen 20Ah battery A bunch of step-down regulators Power switches 5.5 mm power socket for 12V input Pin sockets and wires Print…
Info: This was designed for either passive, active, or dual cooling specifically using the Armor Case passive cooling case and Argon HAT (although neither are required). Included are: bases with and without feet, optional feet, tops with…
RPI Display Box Mini / Mini+ Case and interface parts for mounting your RaspberryPi 3B / 4B / 5 at the back of the Mini/Mini+ display box. Printing Notes: Layer height 0.15 mm. Designed for 0.45 line width. All supports are integrated…
Required: screw M3 x 10mm hex bolts screw M3 x 20mm hex bolts nut M3 square nut M3 For camera use box from https://www.thingiverse.com/thing:3294512 (Back.stl and Front.stl). Post-Printing How I Designed This =================== Category:…
A cute little case for a RaspberryPi Zero
