776 models
Sized inspired from commercial elastics threader. Easy and quick to print, a must to have in your sewing toolbox. I have added a version with holde to allow cords or round elastics insertion. Can be print in PLA or PETG
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Parametric glue spreader. No need to go to the shop. The print files all have teeth glue lines 1,5 - 2,5 - 3,5 mm. The shape of the glue line is triangular. The FreeCad file is included so you can modify this trowel exactly to your needs.…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Tool for creating nice corners of silicone (e.g. in the bathroom). One object has a 3, 4, 5 and 6mm radius and the other a 7, 8, 9 and 10mm radius. Enough choice for every job!
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Update 2023-04-30: On request I have modified the design (V2). Several sharp edges have been rounded (as good as Fusion 360 has let me directly). Also I have changed the extensions and the lid. They have 45 degree chambered edges and it…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
Next time the drawstring comes out of your garment, instead of struggling to get it back in, print this model and easily fead it back through (almost like a giant needle!). This is very fast to print and uses very little filament. This…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Miniature woman/reader for your diorama, architectural miniature or as a figurine. Woman | Girl | Tourist | Architectural figurines | People | Model | Reader Woman is suitable for 3D models of nature, spring, summer and autumn city or as…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
Woman | Girl | Tourist | Architectural figurines | People | Model | Reader Woman is suitable for 3D models of nature, spring, summer and autumn city or as a tourist. Printable for the most common scales (with girl height 175 cm): 1/12…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
This is a simple and clean universal phone stand with 2 different viewing angles for smartphones with an fingerprint reader at the bottom. Fit's for example the IPhone SE. This is a remix of this original model:…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Box for 6 SD Cards and a mobile SD card reader designed in FreeCAD. Source files included. Print instructions I Print with .6 mm nozzle, which I find to be the best for this scale of objects.
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant
Table Stand for UniFi Access G2/G3 Readers: Finally a way to have a tabletop reader for adding cards to UniFi access. No more readers strewn across your desk. The Idea: Make a table-top stand, based around the existing aluminium bracket.…
Print approx. €4.24–€5.18 excl. taxPreliminary estimate for PETGSource material: PET
Replacement part (P50 SPREADER CLAW (P750)) for a Cartoni Smart Lock mid-level tripod spreader (S731/SL). Intended for when one of the “claw” bits on the original breaks, and you only need the main part replaced. ADDITIONAL PARTS NEEDED :…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET
magnetic threader ring or keychain helps run cables and other wires behind walls and through tubes. fits a neodymium magnet dimensions listed on STL keychain version requires a keychain around , feel free to replace keychain with anything…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Small tool to help getting drawstrings or rubber bands through holes: Hook or slot for holding on to rubber band or string. Scale it up in slicer if longer or larger tool is needed.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
A simple holder, to screw a card reader to a piece of furniture. Jednoduchý držák k přišroubování čtečky karet k nábytku.
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
One side is for M12 other for M6 4 perimeters 50% infill PETG
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the popular Modular card wallet by CHKING. I've strengthened the sides a little and added a slick storage compartment on the back which keeps it nice and slim. This wallet version is only for 6 cards. Small magnets can…
If you've ever needed to re-thread a drawstring for a hoodie, you know it can be tricky. After struggling with this once I designed these drawstring threader needles to make the process much easier. Simply pass the end of the string…
Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…
This is a slight remix of the remix done by Mike_111723; original modular card wallet by CHKING. What I changed: Edited the Middle Section to be 3mm thinner, now only measures 3mm vs 6mm. Added key ring to the Middle Section. Edited the…
This Fully Enclosed Open Source Cartridge Reader Shell (FEOS) is designed to be durable, well protected, and look stunning on your desk. The shell is a multi piece assembly, the shell base, the cover, battery and the faceplate. The “decoy…
Have you ever accidentally pulled the drawstring out of your favorite pajama pants? Trying to push a floppy string back through a long fabric channel just so you can keep your pajamas tight along your body can be incredibly frustrating.…
This is the ultimate flat elastic threader ! I have always struggled with the one-size-fits-all elastic threader, because it just either didn't grab the elastic tightly enough or it didn't fit in the tunnel for elastic. This is a set of…
This is a wood glue or adhesive spreader or trowel, in 4" and 6" blade widths, with three teeth width options for each blade - .125" (1/8"), .188" (3/16") and .25" (1/4"). The design is lightweight, but easy to hold. It uses ~ 8-10 grams…
The source marked this model as adult content.
You can build your own Disney magic band scanner with Adafruit Feather RP2040 and Circuit Python. This project uses the RFID Wiz Kit to scan your Disney magic bands to animate a strip NeoPixels and plays your favorite sound effects. Video…
📖 "Cozy" – Your New Favorite Reading Companion ☕ The ultimate 3D-printed buddy for everyone who loves a good book, a hot cup of coffee, and a splash of green! ✨ If You are interested of my other Designs, feel free to visit me under 👉…
I've made this stand to fit the Kindle Paperwhite, but it can hold the majority of ebook readers on the market . The stand is robust, stable and Print-in-Place (just print it from the right or left side). Dimensions: Length 10cm Height…
Here is a handy cup style spreader for sidewalk salt. Simply fill with your preferred ice melt product and use like a giant salt shaker. Or you could also use it to spread anything that comes in granular form.
Filling lot's of mortises with wood glue before a glue-up is slow and tedious. These caps screw on to most PET bottles and make glue filling mortises for Festool Domino's a lot easier and faster. I use it only with white or yellow PVA…
Epoxy mixing spatula & spreader Combined stirrer, applicator for the Epoxy Work Station I joined the tools to make one tool instead of two. I increased the thickness of the tool ends to make them less floppy and reduced the thickness of…
Four sided adhesive spreader with three different notch patterns. Each side is labeled, just in case you are super interested in the exact spacing of your glue. I know I am. Print with some filament that you don't mind getting glue all…
The spatula has 2 usable edges that can be adjusted to your needs. Due to its parametric design it can be any size, from tiny for model kits to big for woodworking for example. --- Erratum (03/06/25): Addition of a make and a Bambu Lab…
Depending on orientation and printer capabilities this may require a small amount of sanding to ensure no “rough” edges (nothing even close to what it would take to cut a bridge line. Please drop a make or comment so this design can…
2024/03/15: Added a larger version. HO scale model train ballast spreader.
Have you every thought to yourself; “Man, this ballasting work sure is tedious and messy and due to my infomercial like clumsiness i simply just don't possess the basic human arm motor-skills. There has to be an easier alternative!” Well…
I believe I printed top down I printed with ASA and have been using it for about 1 season so far with good results.
Description: This minimalist 3D printed wall mount is the perfect way to mount your Access Reader G2 Professional to an exterior wall. The slim design puts the focus on the reader itself, not on the mount itself. Recommendations: Print in…
Applicator for applying and smoothing spackle to fill drywall holes and cracks. I tried several hardness vs flexibility for the blade and 0.5 won out. No supports or brim needed. Printed on my Prusa MK3S+ in about an hour and a half so I…
just a quick dock dor the sumup card reader, am yet to print but help yourself. available as a clean no charge version or a version with a slot for the cable. How I Designed This fusion 360 Category: Other
Designed for nozzle size 0.4mm but can be changed in the provided OpenSCAD file. Best printed with 0.10mm layer height (The eye part is 0.3mm high). Also, tested with 0.12mm though model scaled to 106%. No adhesion, no supports.
Just got my card reader and didn't want to pay for there dock when I could design something that would do the trick, so here it is a dock for the Square Card reader. Revision 1: Made the USB Charger hole bigger (I measured the wrong cable…
For whatever reason, I couldn't really find any good models online for putty knives or plastic spreaders, so I made this quickly in Fusion 360. I specifically needed this to spread caulk on a drop cloth to make a battle mat for our DND…
Only providing the basic version for free the other file will be available elsewhere if you wish to get the other variations! Easy to print and holds a standard Square Chip POS reader Has three included pen holders and a back section to…
Those small glue spreaders print in a few minutes. There are four different comb sizes: 8 teeth of 1,3 mm 8 teeth of 2 mm 6 teeth of 2 mm 9 teeth of 2 mm The good news is that you can modify the FreeCAD file to your needs. It is fully…
Here is the model of a solid needle threader which can still be used 9 times if it breaks. Prints quickly and uses only 1 gram of filament. Perfect for spool ends. Here are the step to use the model. Thread the eye of the needle into a…
The case used for the TapTo USB-C Reader . Compatible with any of the black USB-C PN532 NFC modules available on sites like AliExpress. Please see the TapTo Wiki for more information about TapTo and the PN532 NFC module. This model is a…
v1.1 - added step files, go nuts Miss loading physical media into some kind of slot to launch a game? And then pressing an eject button to swap to another game? The solution is here! Using the TapTo project , this case can be paired with…
Simple print that holds your Square Reader with a Background Display for Square stickers. The sticker that comes with your Square Reader will need to be trimmed down on the sides to fit the background. There is a hole included for the…
A simple Square Reader holder that slightly raises and tilts the reader towards the front, with a slot on the rear side for a cable and a holder on top that can hold a business card or a 1 mm thick printed sign (as shown in the cover…
A set of six spreader plates for smooth and consistent silicone finishing. Three plates feature concave radii (fine, standard, large) for common inner corners and joints. One plate has convex radii for outer corners, and two plates are…
A screen printing scoop designed based on some I have seen on the market. I wanted to print my own so I designed one. One side is round and one side is sharp. There is also a ridge on each side for easy grip. Print the middle piece at…
For size to models of @MrHanjak tractors use 350% except the drive only 250%
My friend's dad kept losing the original hopper paddles for his walk-behind spreaders. These fit snugly on the hex shaft and also drop down 1/4" into the hole in the hopper to minimize the slop in the shaft. These were printed in PLA and…
a salt/icemelt spreader cup. Comes in 3 parts the main cup/ the selector and the scoop/spreader this should make replacing parts if something breaks easier as-well as printing just what you want. Update: added more clearance to the…
Wall mount for the Unifi Access G2/G3 reader
A versatile spreader designed for salt, seeds, and other granular materials. 🔄 Includes 6 interchangeable lids — 5 with different hole patterns + 1 fully closed lid 🌱 Perfect for planting grass, distributing seeds, or salting icy paths 👌…
A toy credit card reader with a swipe slot and a chip slot. It's oriented to print the buttons and screen as the top layer with supports under the slope so the numbers and buttons come out nice and support material doesn't have to be…
This actually ended up really useful, if grass seed wasn't so expensive I'd be using it all the time because it really works well! Long story short, I needed to spread some grass seed so I designed and 3D printed one (well mostly printed,…
Printed at .16mm with supports If you have adhesion issues rafts or brims may be necessary
Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…
New Version uploaded, will not be necessary screws and the focus distance is possible to modify easily. These three combined models are ideal for performing massive loads in your MTG card management applications (Manabox,MTG, …). The Top…
Square Reader holder I made for myself so I have something to mount it in and it would be harder to misplace. Basically a simple Cyclinder with a hollowed out area that will hold a Square Reader with a slot so people can still insert…
This is a spreader bar for a model crane. I designed this to work with m3 screws on the buckles and to be easily printable on an FDM printer, while being strong enough to hold your scale loads. Make sure you rotate the buckles so they're…
A simple cover to put on your OBD-II reader when you are not using it. Compatibility I use this with my ‘Veepeak’ generic reader from Amazon. It should fit other devices, as it is designed around the OBD-II port specification's…
Just a simple Tinkercad remix. I wanted a bevel on the end of the glue spreader, so I added one and made the handle rounded at the same time.
This 3D model is an adapter housing designed for the board of the bitShake SmartMeterReader availible on Amazon https://www.amazon.de/dp/B0CCMXSPVX , now integrated with Home Assistant using pre-flashed Tasmota firmware for enhanced…
Needed a cleaner design. The spreader width is slightly adapted for any chosen tooth size to accommodate only whole teeth. The provided stls measure roughly 100x60 mm. The parametric Fusion source file is now also available.
Protective Case for ebook reader Kobo Libra Colour. I did not find any suitable case for this new reader so I made this simple one. Just slide it in, it should snap in by the wider end where USB charging port is (just be careful when…
Book lover? This is the trophy for you! This is the best prize for those who love to sit all day and read. Don't hesitate to print it ;) UPDATE: Added a blank scroll and book for your own customization. Thanks to Mika for that idea.…
Quiet moments, cozy vibes, and a good book — that’s Pusheen’s perfect day. 📖 This adorable figurine captures Pusheen enjoying her favorite pastime: reading! A lovely piece for book lovers, cat fans, or anyone who believes in the magic of…
I designed and created this reader spacer at the request of a coworker. This design allows someone installing these standard HID Signo 20 readers to have additional space behind the reader, as the wires jut out immediately from the…
Fully compatible with FDM printers, NORMAL SUPPORT REQUIRED for little bridges
The end-all of glue spreaders. Change one parameter, and it will remake it to your desires. Includes auto braille! Uses FreeCAD as the main parametric platform. It is free , so editing won't cost anything. All parameters are customizable,…
A simple 100mm (4"), flat, flexible resin spreader with one flat edge and three notched edges with notch sizes approximately 3.3mm (1/8″) 5mm (3/16″), 6.7mm (1/4″). It's a lot like the similar looking spreaders that you can buy for a few…
These little wedge spreaders -now 50% littler!- will help you keep the calipers of your disc brake system apart when you take your wheel off, and when not helping you do that they'll clip together to store neatly and efficiently wherever…
This upgrade was designed to provide a DC-DC converter and 5V USB connector to power my Buddy3D camera, with a second USB output to make it easier to power LEDs, ventilation fans, or custom boards connected to the GPIO option for the…
I've included STL, STEP and Fusion 360 files if you would like to edit. 6mm x 6mm. I printed in PETG but would work in most materials. 0.3mm layer height
This is a case that will hold ten microSD cards and a small USB card reader (or I guess technically eleven cards if you keep one in the reader). I designed it around the SanDisk model that I have. I believe it is model number…
N gauge oo gauge ballast spreader for model railways railroad
OpenPill Mini casees modified to accommodate smartcard hat. There are a number of different models and what you need will be dependent on both the cardslot(s) that your reader hat has as well as how you have connected it, Stacking Header…
Use to mix and spread your texture paints around or anything ketchup?
This leg spreader for the RT90C tripod is designed to work in conjunction with the ZWO PE200 pier extension. It consists of two parts: the spreader and a bracket for a M10 hex bolt which prevents the bolt from spinning and allows for easy…
A simple model used to spread wood glue on woodworking projects. I added a couple of fun glue-related puns because I love puns. I hope it makes you smile as much as I did when I printed it out and gave it to my buddy!
Hi there, Presenting my latest “masterpiece”: a spatula and glue spreader set! I've kept the model as tiny as possible to save your precious filament and minimize print time. After all, who wants to wait forever for a few handy tools,…
ever pulled that string on your hoodie or your PJ pants a little too far and now it's out? you can try and rethread it with a safety pin or a straw or just loop or tie it to this tool and thread it right back in under 30 secs. the pencil…
This model was based off of the excellent TapTo USB-C Reader by Wizzo for the same purpose! For aesthetic reasons, I wanted the model to be a little larger, just so that it matched the size of the NFC Cards. Aside from that, I also added…
Video of this project working: This enclosure is intended to hold a PN532 NFC reader along with a Raspberry Pi Zero 2 W for the purpose of reading an Apple HomeKey to unlock or open a door. I'm running the software found here and…
I made a new version of @ManelTo Electronic Box cover for the MK4S with NFC Reader. Don't forget to place support under the floating arm. (see screenshot) The holes for the square nuts don't need support material ( Floating holes ).…
Tired of wrestling with your book when you just want to read hands-free? I designed a print-in-place finger ring that spreads the pages open wide while staying super comfortable to use. ✅ Print-in-place – no assembly needed ✅ Minimal…
Spare parts for the "Rauch" fertilizer spreader models ZS, ZSA, and ZSN (others may be compatible as well)
I drew the lid in 2 parts so I wouldn't need support for the upper part. Animation of construction on instagram https://www.instagram.com/p/CkYZWJ7j3wz/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
If you're not sure which size to print, I recommend starting with the 4in model as it's more versatile. I found the 6in version to be too large and unwieldy when gluing 2"x4"s together. I printed mine in PLA with 3 perimeters, 4 top and…
3D Printed Book Lover Gift – Home Office Desk Decor
A holder for a Kobo Clara HD. Requires some ergonomic adjustments Category: Gadgets
This is an improved case for the optical read/write head for energy meters (smart meters) developed by the "Volkszähler" project in Germany. In addition to the printed parts you'll need: a ring shaped neodymium magnet, outer diameter…
