659 models
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
the force required to insert filaments through the sidemounted filament sensor didnt agree with me so i reduced the spring compression by 1mm. reducing it more will become problematic for the center filament. integrated filament numbers…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
No additional parts are needed. I used: Material: PLA Supports: No Layer: 0,2 Nozzle: 0,4 Brim: Optional BUT geometry its printer-friendly so it will be okay if you use other configs. AND its symmetrical so it works on both hands. UPDATE…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
Reducer for dust extraction for Extol ESB1010. This end cap ensures the removal of dust particles from the machine. It reduces the outlet from the machine base to a 30mm hole for a flexible hose that is connected to the extraction (e.g.…
Print approx. €2.88–€3.53 excl. taxPreliminary estimate for PETGSource material: PET
The keystick is printable mechanical linkage that converts 4-way key actuation (2, 4, 6, 8) into a central joystick move . Context and motivation This proposal is based on an old idea from Spain's Centro de Referencia Estatal de Autonomía…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
use this stand if you want your Hazet Maintenance Unit mobile and not fixed to a wall. You will need 6 M6 bolts, washers and nuts as shown in the pictures and you have to mirror the strebelinks model if you don't use the presliced files.
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for one variant
This is to fit the: Kodak 35 mm U-Core 2 inch / 52mm film core/spool and 400ft to 100ft Bulk Film Respooler by @MaslovyRohlik originally the [Thingiverse] 400ft to 100ft Bulk Film Respooler by @broken_perfectionist This is a handy device…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Deadbolt plate. Simple, but it works. Used PLA. Size is 80mm ⌀, Inner hole is 60mm ⌀. Object is 2.5mm thick. Model has parts to reconfigure size to your door.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
Hello fellow Bambu Lab owners. Do you hate all that waste that the AMS units generates? Me too. That's why I made this guide how to reduce / tune / calibrate / optimize the purge waste. If you find this guide helpful, I'd be glad if you…
This remix has been run through Quadratic Edge Collapse Decimation in MeshLab to reduce the number of vertices while retaining the most true geometry. This was done to shrink the file size to under 25Mb, as Tinkercad has that upload size…
Created the missing cover for the back of the print bed and merge that with the Noise Reducer that would also go there.
This model is compatible with the lego system.
FR La Flashforge Adventurer 5M Pro est une imprimante 3D qualifiée très silencieuse, mais une mauvaise conception du support du ventilateur refroidissant les steppers vient perturber le résultat. Ce support permettra une fixation plus…
Scroll Down for Assembly Instructions Purpose This set of models is the result of testing to help reduce VFA (Vertical Fine Artifacts) coming from the misalignment of the Y axis belt on the MK4. As originally designed, many of the parts…
Updates May 22, 2022 added dual version of insert-empty Simple remix of the original insert-empty (single and dual) to remove 3 of the 6 tabs to reduce friction and hopefully improve insert / removal with the honey comb wall.
A Sig Sauer reduced angle grip V1 knockoff made from a photo and a random grip from Laffs Dynamics(on Odysee). Can't find what I made it from originally. 1.1 UPDATE - Now will accept the serrated washer/flathead screw An alternative since…
When I need a bunch of Dominos for repeated dry fits to dial in my parts's sizes, I typically sand down standard wooden Dominos. By printing these I get the advantage of a lower price, less of my time spent preparing and marking them, and…
Mounts to a standard 120mm fan and the other end fits inside 3 inch aluminum flexible ducting. Mount holes to fan are size M4. Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts:…
This is made to accommodate a “press fit” for the tapered adapter that came with my VacMaster Shop Vac 2.5" hose. The stock tapered adapter's OD (outside diameter) starts at about 58.5 mm at the base of the connector and tapers to about…
Please note: this is designed to be a press-fit INSIDE a blast gate (or dust hood) with a 4-inch OD, as shown below: … which is exactly how the POWERTEC 70291 (after which this was styled) fits inside a blast gate (or dust hood) with a…
This helper holds two wires together so you can hold the solder and soldering iron. This is a remix of a great design by PeterLandin. I needed something a bit smaller, so I reduced the size and added a couple more slots for various wire…
Cover and noise reducer for the rear of the AD5M bed. I saw there are covers from other makers for the side mounts, and a rear plate for the AD5X, but not the AD5M or 5M Pro. Printed in PETG. Pops into place. Assume it will work well as I…
This helps to make the waterflow a bit stronger and have less water running just along the sides. It should fit tight, so there is no glue needed - and so they are changeable if you want another color
Description : This 3D printable model is designed to enhance both the look and functionality of the Creality K1 and K1 Max printers. Mounted on the side fan intake, this fan visualizer spins as the fan operates, offering a visually…
Supports in the connector area.
I created a DIY airbrush spary booth using two Ikea Samla boxes and a bathroom fan as the exhaust. However, the output of the fan is to a 6 inch hose which did not fit my needs. Therefore I needed a way to reduce the connection size from…
Spool for Bambu Labs filament refills with external diameter reduced to be printable on an A1 MINI. The internal diameter is unchanged. This spool may not work on Bambu Labs large AMS and other rim roller type filament holders. The photo…
Size/scale to fit your needs in the slicer and print them out!
Hi I made entrance reducer or closer (its modification of commercial product) Its 19cm long, 3cm high. ASA, ABS or at least PETG recommended for outdoor usage. Take care of orientation, and remember it will be pulled and probably…
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
A pipe joiner that joins 0.75in.(19mm.), pipe to 0.5mm.(12.5mm.) pipe. PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports
Developed to provide an adapter from a new 6" bathroom fan to an existing 3" exhaust duct. Printed in ABS, 0.3mm draft, 50% infill, with a brim. Easily prints in other materials. Default Parameters: large_diameter = 157; // Big end…
This model hold your device, takes less time than the original, and has a cool apple logo to show your apple pride. (Not original, only updated.)
This is a wind noise reducer for the ND Miata. It attaches to the small triangle window next to the side mirror. It helps reduce the turbulence when having the windows and top down. Not tested on an RF. Print the step file for a cleaner…
riduttori di suono… semplici, leggeri, rapidi nella stampa, efficaci nel ridurre il suono emesso dalla tua ASG all'interno di APOLLO 40mm vanno inseriti 7 riduttori di suono. buon divertimento. MATERIALE: ECO-SMART PRINTOLOGIST
Modeled in Siemens NX. Printed the Planet and Sun Gears out of Nylon with 0.25 Nozzle at 0.07mm layer height and 100% infill, the Carrier out of Nylon with 0.4 Nozzle and 0.1mm layer height and 100% infill, the rest out of PLA with 0.4…
Its here, Version 2 of the cycloidal reducer! All the hardware is the same from the original version, however every printed part has been redesigned! Here are the current improvements over the original: It is now easier to print and…
The camera from Qidi for the X series printers suffers from some pretty bad glare. This sub 13-minute print will make your camera look so much better. Be caution of your material choice due to internal chamber temps.
Manufacturing procedure: Material: PETG 3D Printer: FDM 3D printer, average print time 2 – 6 hours, depending on size Slicer settings: 7 perimeters, 0.3mm layer height, print vertically, use brim Post processing instructions: Clean the…
The original washer is too low and loose + head screw housing in the chain cable is to large. So the cable chain is not firmly in piece one the toolhead, and it wobble when printing. This simple mod fix this issue, also helped me…
every meter filament counts, here is a filament reduced version of the bottom part for the stackable beer crates. This is a drop in replacement, dimensions are kept with the original. I added pictures from the slice info. First picture is…
This is a remix of the PRUSA RC3 Face Shield, in 888 format (the holes are 80-80-80 spaced for a standard 4-hole punch, unlike the 80-60-80 of the original). This version is also reduced in height, with a 8mm tall section for the visor…
riduttori di suono… semplici, leggeri, rapidi nella stampa, efficaci nel ridurre il suono emesso dalla tua ASG MATERIALE: ECO-SMART PRINTOLOGIST
Bottomless Tokens and Gnar Dog Tokens reduce air volume in your rear shock and create greater progression at the end of the shock's travel. Add or remove tokens to tune your shock's bottomless feel. Gnar Dog Tokens are equivalent to 2.5…
4" to 2" PVC pipe reducer. Straight and 11° angle models. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Doesn't Matter Resolution: 0.20 Infill: 20-30 Filament: Generic PETG White Notes: Consider increasing…
This piece replaces the factory Y fitting on most dust collectors with a 6" inlet. This will substantially reduce the turbulence of the Y fitting and increase airflow by reducing the drag through the system, resulting in fewer clogs and…
Credit to @Jonathanlin for including the f3d file that made this an easy first remix! I did slightly reduce the diameter on the side that connects to the Cloudline S6, the fit is very tight so make sure your printer is well calibrated. I…
Print vertically to ensure the layer lines don't snag on the carpet.
Watch it go at: This gear reducer is a hybrid of a planetary drive and a harmonic drive. It starts off with a conventional set of 5:1 planetary gears. The ring gear has 96 teeth. But then I've extended the planets and sun gears and added…
I printed it at 0,2 layer height with generic PLA
Remixed this really great design of this Festool adapter that twist and locks into place just like any native Festool product. I've added a reducer so that it expands to a 2.25" outer diameter so that I can use my old RIGID vacuum…
You can print this without using supports and using 20% fill. It provides the same stiffness as a purchased adaptor and should pop straight into the lamp shade once printed. Note : (nothing to do with the print). When fitting the light…
Anycubic Kobra neo 2 Anti-vibration feet, fine level adjuster and noise reducer / Antivibration Fuß höhenverstellbar feet → 0.4 Nozzle → 0.2 mm Layer Height, → 15 - 25 % infill, → TPU spacer → 0.4 Nozzle → 0.2 mm Layer Height, → 50 %…
My KP3S Pro V2 didn't fit with other designs, so I remixed it and reduced the height from the one by Mr. Baham https://www.printables.com/model/499596-kp3s-pro-v2-fanshroud And used in my review video:
Removed the magnet holes from the reduced height versions of the gridfinity collection for faster print times. I only edited the endcaps as those were the ones I needed. Also added two more endcaps (2x1 & 2x3). The models are very crude…
I love the original design to death, but I tend to “reduce” or remove branding on printed parts for personal use, and these are basically those changes. In this case, reduced means the branding geometry was moved inside the clamshell, and…
This is a remix from the work of Phiphila https://www.thingiverse.com/thing:5974177 This remixed version allows you to connect a 1/2 to 3/4 (16mm to 20mm) electrical duct ICTA. IMPORTANT WARNING REGARDING THE USE OF THIS ICTA CONDUIT…
Print using ABS or ASA for max UV resistance. The best color is red or transparent red, as this messes with the small hive beetle (SHB) vision. However, other good colors are violet, blue, orange, and yellow because bees see those colors…
DEPRECIATED: I have a new page for a complete redesign of the Y axis belt components for the MK that better accomplishes what this model can't do alone: MK4 Y Axis Overhaul - Reduce Vertical Artifacts on Your Y Axis by KyleTW | Download…
The MK4 "x-carriage-back" was able to hit the frame hook of this part so I adjusted its width. After publishing this I found that a cable tie on the x-carriage cable outlet can interfere with this by about 1mm so I added…
I really liked the reduced filament scraper by @Wildcat , but found that the slot was not large enough to actually hang on any hooks.
£1 Trolley Token designed to use only 0.88 grams of material and print in just under 4 minutes. Same shape as a British One Pound Coin, so be used in trolley's and swimming pool lockers. Recommended Print Settings Nozzle: 0.4mm Layer…
V2 3D printed 1:10 reducer for crayford focusers Update History 2) Integrated needle mod and V1 small button alternative - Integrated needle mod within original file. You can still like and download here or from remixes list. - Added…
This is a 3D printable model of a pipe reducer designed to connect two irrigation pipes of different diameters: 10mm and 6mm. The reducer ensures a secure and leak-proof connection, making it ideal for gardening, agricultural, or other…
This is my first experience with 3D modeling after 25 years. I printed it on a Flashforge AD5X using Elegoo Rapid PETG, a 0.4mm nozzle, a 0.16mm layer height, and 5 perimeters. Hope it will be useful for somehow
The air coming out of the heatreak fan is causing a lot of noise in the heatsink blocks. Thanks to this fan cover, the air is evacuated from a single point and reduces the noise generated by the fan by 50%+. You will feel the difference…
A bar to restrict the opening of a bee hive to enable the bees to defend their hive more effectively in the spring when their numbers are lower. Two different sized notches - just rotate to choose which one. Two parts since it is too long…
This is a reduced stl file based on 3dbenchy.stl from: https://www.printables.com/model/3161-3d-benchy Number of facets is reduced to make it more manageable for import, file size is under 900 kB. Text removed. No errors detected in…
Original model pin tolerance was too tight, I reduced the pin's diameter and now works perfectly. I printed it in PLA and only 5% infill and feels light and sufficiently strong. Tougher material and higher infill density would be best,…
Sunlu Filadryer Humidity Control It seems the Sulnu is good for drying filament, but can sometimes cause humidity to condense inside the enclosure. This item allows packets of silica gel crystals to be placed inside the filament roll.…
This bin has a reduced wall height so you can still get things in/out of it when another bin or a shelf is mounted directly above. Available in quarter less high and half less high versions. Update: Instead of printing the versions of…
Roll up your string of tree lights on this reel. It will reduce the anxiety next year when unraveling the lights. During the unroll this year, the tangled lights brought me anxiety. So, I am going to try this in January and December 2023.…
A quick modification I made to the stock idler mount for the Y axis that helps keep the idler perfectly horizontal and aligned to the belt by using two alignment tabs on the top on bottom of the part. These take up the slack that can…
This is to reduce the hole diameter of Filament spools. The included stl files are for a filament spool with a hole diameter of 74mm, reducing the hole to 55mm. Holes are cut through the walls to reduce filament use.
A reduced version for faster printing with less spaces while maintaining original features. Thanks for the creator!
Check out version 2 here ! At the moment (6/7/24) it is still in beta, but version 2 is still better in almost every possible way! Reduction specs: 64/1 reduction. NEMA 17 mounting. BOM: 4x M3x25 cap head bolts 2x 10x15x4 bearings 1x…
I retro-fitted a new bathroom fan and had a need to reduce the outlet from 4" to 3" to enable routing to the outdoors through my soffits. Found at local hardware stores reducers but they were 8" longer than I needed, I wanted one at 4"…
Background This model is based on this forum discussion , notably the ideas and experiments of forum user @kaaaaaaaaaaaaal. But while @kaaaaaaaaaaaaal drilled holes into the stock parts, this model is modified with the required openings…
This bin has a reduced wall height so you can still get things in/out of it when another bin or a shelf is mounted directly above. This bin is wider than a normal bin on one side, use the extra space at the end of a Link rail or to fill a…
Customized version of http://www.thingiverse.com/thing:44850 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=44850 Instructions Using the following options: barb_flatness_ratio = 3 cone1_wall = 2 cone1_min…
Made this so that I could mount my eSun eBox lite filament tube directly to the Y splitter I just printed. Now when printing with non AMS compatible materials, of any size without spool adapters as it has bottom rollers, I don't have to…
5in (5in I.D 5.12OD) 6in(6.12in ID 6.24in OD) 4.5in high. Designed to attach the Harbor Freight 2hp Dust Collector 5in inlet directly to the outlet of the Oneida 4/5 Super Dust Deputy cyclone. Print time with PLA and standard Cura…
Thanks to D4rk Helmet for the original model. Created this remix to reduce printing costs with the 3D printing service providers that I took into consideration (I do not own a printer myself, so I have to rely on these) - the original…
This is a remix of the side filament sensor of the Prusa XL. Especially when using flexible or soft filaments, it is almost impossible to get them through the side filament sensor. The user tg73 has found a magnetic solution for this.…
Wanted a reduced angle grip for an HPA drop-ins and could not find anything, so I butchered a file from Igniz on Cults3d( https://cults3d.com/en/3d-model/various/aeg-ar15-pistol-motor-grip-1 ). The remixed model doesn't look all that…
Did you know 27 million business cards are printed every day - and 88% of those are thrown out within a week? That's 8 BILLION cards thrown out annually, or about 8,000,000 kg of waste. Business cards are still an essential part of…
4 pieces. Easy to attach (with small flathead screws) to a standard langstroth box. 14 5/8" minimum width. 3/8" holes for winter/ rodent control. Removable sliding door for transportation.
I needed an adapter to reduce 7" flex duct work to 6" for my woodshop dust collection system. Unfortunately the HVAC adapters were all too long to fit my need, plus were surprisingly expensive. I decided to design one myself and made a…
This is a simple reducer adapter for Xiaomi Mi Vacuum Cleaner mini.
I really liked the design of the original, but it's a little too big for my tastes. I would have liked to make all the surfaces thinner but I lack the CAD skills, so I just removed a bunch of the back plate. Little faster printing and…
A simple rim that clips around the outside cardboard spools. Print 2 of these, one for each side. I found that this substantially reduces friction for spools to roll smoothly, resulting in more consistent extrusion. I would recommend…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
An adapter to enable using a 50 mm axial fan on a 40 mm axial fan mounting. Due to space constraints, you will need to thread the 4 mm bolts into the plastic. Print instructions Category: 3D Printer Accessories
Reducer M22 M28 for saving attachment to bath faucet. Redukce M22 M28 pro spořící nástavec k vanové baterii.
Medal holder 8x3 mm magnets 3-3,5 mm screws for wall mounting
If you are running an aftermarket hot end with replaceable nozzle on your bambu x1 or x1c, then you are likely 2mm lower than the original nozzle. So I remixed the wiper to be 2mm lower. Works with m6 cht nozzle. Printed laying on back…
English version below. Skischuh Volumen Reduzierer Diese Einlagen wurden mit 1mm PETG gedruckt und 1mm TPU darauf gedruckt. Wenn mit zwei Materialien gearbeitet wird bitte das Modell für den linken Schuh spiegeln. Modell: Schuhgröße ist…
