443 models
Remixed this really great design of this Festool adapter that twist and locks into place just like any native Festool product. I've added a reducer so that it expands to a 2.25" outer diameter so that I can use my old RIGID vacuum…
Print approx. €4.92–€6.01 excl. taxPreliminary estimate for one variant
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
DANBY Air conditioner AC 7 Inch adapter/reducer to 5.9Inch (15cm) originally drawn for model DPA120B8WDB-6. Short and long Versions (I prefer the short one). Reducer to 5.9Inch (15cm) drawn because 7 inch ducts seem harder to find on…
Print approx. €9.43–€11.53 excl. taxPreliminary estimate for one variant
This is to fit the: Kodak 35 mm U-Core 2 inch / 52mm film core/spool and 400ft to 100ft Bulk Film Respooler by @MaslovyRohlik originally the [Thingiverse] 400ft to 100ft Bulk Film Respooler by @broken_perfectionist This is a handy device…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Created the missing cover for the back of the print bed and merge that with the Noise Reducer that would also go there.
FR La Flashforge Adventurer 5M Pro est une imprimante 3D qualifiée très silencieuse, mais une mauvaise conception du support du ventilateur refroidissant les steppers vient perturber le résultat. Ce support permettra une fixation plus…
Mounts to a standard 120mm fan and the other end fits inside 3 inch aluminum flexible ducting. Mount holes to fan are size M4. Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts:…
This is made to accommodate a “press fit” for the tapered adapter that came with my VacMaster Shop Vac 2.5" hose. The stock tapered adapter's OD (outside diameter) starts at about 58.5 mm at the base of the connector and tapers to about…
Please note: this is designed to be a press-fit INSIDE a blast gate (or dust hood) with a 4-inch OD, as shown below: … which is exactly how the POWERTEC 70291 (after which this was styled) fits inside a blast gate (or dust hood) with a…
Cover and noise reducer for the rear of the AD5M bed. I saw there are covers from other makers for the side mounts, and a rear plate for the AD5X, but not the AD5M or 5M Pro. Printed in PETG. Pops into place. Assume it will work well as I…
This helps to make the waterflow a bit stronger and have less water running just along the sides. It should fit tight, so there is no glue needed - and so they are changeable if you want another color
Description : This 3D printable model is designed to enhance both the look and functionality of the Creality K1 and K1 Max printers. Mounted on the side fan intake, this fan visualizer spins as the fan operates, offering a visually…
Supports in the connector area.
I created a DIY airbrush spary booth using two Ikea Samla boxes and a bathroom fan as the exhaust. However, the output of the fan is to a 6 inch hose which did not fit my needs. Therefore I needed a way to reduce the connection size from…
Hi I made entrance reducer or closer (its modification of commercial product) Its 19cm long, 3cm high. ASA, ABS or at least PETG recommended for outdoor usage. Take care of orientation, and remember it will be pulled and probably…
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
A pipe joiner that joins 0.75in.(19mm.), pipe to 0.5mm.(12.5mm.) pipe. PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports
Developed to provide an adapter from a new 6" bathroom fan to an existing 3" exhaust duct. Printed in ABS, 0.3mm draft, 50% infill, with a brim. Easily prints in other materials. Default Parameters: large_diameter = 157; // Big end…
This is a wind noise reducer for the ND Miata. It attaches to the small triangle window next to the side mirror. It helps reduce the turbulence when having the windows and top down. Not tested on an RF. Print the step file for a cleaner…
riduttori di suono… semplici, leggeri, rapidi nella stampa, efficaci nel ridurre il suono emesso dalla tua ASG all'interno di APOLLO 40mm vanno inseriti 7 riduttori di suono. buon divertimento. MATERIALE: ECO-SMART PRINTOLOGIST
Modeled in Siemens NX. Printed the Planet and Sun Gears out of Nylon with 0.25 Nozzle at 0.07mm layer height and 100% infill, the Carrier out of Nylon with 0.4 Nozzle and 0.1mm layer height and 100% infill, the rest out of PLA with 0.4…
Its here, Version 2 of the cycloidal reducer! All the hardware is the same from the original version, however every printed part has been redesigned! Here are the current improvements over the original: It is now easier to print and…
The camera from Qidi for the X series printers suffers from some pretty bad glare. This sub 13-minute print will make your camera look so much better. Be caution of your material choice due to internal chamber temps.
Manufacturing procedure: Material: PETG 3D Printer: FDM 3D printer, average print time 2 – 6 hours, depending on size Slicer settings: 7 perimeters, 0.3mm layer height, print vertically, use brim Post processing instructions: Clean the…
riduttori di suono… semplici, leggeri, rapidi nella stampa, efficaci nel ridurre il suono emesso dalla tua ASG MATERIALE: ECO-SMART PRINTOLOGIST
Bottomless Tokens and Gnar Dog Tokens reduce air volume in your rear shock and create greater progression at the end of the shock's travel. Add or remove tokens to tune your shock's bottomless feel. Gnar Dog Tokens are equivalent to 2.5…
4" to 2" PVC pipe reducer. Straight and 11° angle models. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Doesn't Matter Resolution: 0.20 Infill: 20-30 Filament: Generic PETG White Notes: Consider increasing…
This piece replaces the factory Y fitting on most dust collectors with a 6" inlet. This will substantially reduce the turbulence of the Y fitting and increase airflow by reducing the drag through the system, resulting in fewer clogs and…
Credit to @Jonathanlin for including the f3d file that made this an easy first remix! I did slightly reduce the diameter on the side that connects to the Cloudline S6, the fit is very tight so make sure your printer is well calibrated. I…
Print vertically to ensure the layer lines don't snag on the carpet.
Watch it go at: This gear reducer is a hybrid of a planetary drive and a harmonic drive. It starts off with a conventional set of 5:1 planetary gears. The ring gear has 96 teeth. But then I've extended the planets and sun gears and added…
I printed it at 0,2 layer height with generic PLA
You can print this without using supports and using 20% fill. It provides the same stiffness as a purchased adaptor and should pop straight into the lamp shade once printed. Note : (nothing to do with the print). When fitting the light…
Anycubic Kobra neo 2 Anti-vibration feet, fine level adjuster and noise reducer / Antivibration Fuß höhenverstellbar feet → 0.4 Nozzle → 0.2 mm Layer Height, → 15 - 25 % infill, → TPU spacer → 0.4 Nozzle → 0.2 mm Layer Height, → 50 %…
This is a remix from the work of Phiphila https://www.thingiverse.com/thing:5974177 This remixed version allows you to connect a 1/2 to 3/4 (16mm to 20mm) electrical duct ICTA. IMPORTANT WARNING REGARDING THE USE OF THIS ICTA CONDUIT…
Print using ABS or ASA for max UV resistance. The best color is red or transparent red, as this messes with the small hive beetle (SHB) vision. However, other good colors are violet, blue, orange, and yellow because bees see those colors…
V2 3D printed 1:10 reducer for crayford focusers Update History 2) Integrated needle mod and V1 small button alternative - Integrated needle mod within original file. You can still like and download here or from remixes list. - Added…
This is a 3D printable model of a pipe reducer designed to connect two irrigation pipes of different diameters: 10mm and 6mm. The reducer ensures a secure and leak-proof connection, making it ideal for gardening, agricultural, or other…
This is my first experience with 3D modeling after 25 years. I printed it on a Flashforge AD5X using Elegoo Rapid PETG, a 0.4mm nozzle, a 0.16mm layer height, and 5 perimeters. Hope it will be useful for somehow
The air coming out of the heatreak fan is causing a lot of noise in the heatsink blocks. Thanks to this fan cover, the air is evacuated from a single point and reduces the noise generated by the fan by 50%+. You will feel the difference…
A bar to restrict the opening of a bee hive to enable the bees to defend their hive more effectively in the spring when their numbers are lower. Two different sized notches - just rotate to choose which one. Two parts since it is too long…
Sunlu Filadryer Humidity Control It seems the Sulnu is good for drying filament, but can sometimes cause humidity to condense inside the enclosure. This item allows packets of silica gel crystals to be placed inside the filament roll.…
This is to reduce the hole diameter of Filament spools. The included stl files are for a filament spool with a hole diameter of 74mm, reducing the hole to 55mm. Holes are cut through the walls to reduce filament use.
Check out version 2 here ! At the moment (6/7/24) it is still in beta, but version 2 is still better in almost every possible way! Reduction specs: 64/1 reduction. NEMA 17 mounting. BOM: 4x M3x25 cap head bolts 2x 10x15x4 bearings 1x…
I retro-fitted a new bathroom fan and had a need to reduce the outlet from 4" to 3" to enable routing to the outdoors through my soffits. Found at local hardware stores reducers but they were 8" longer than I needed, I wanted one at 4"…
Customized version of http://www.thingiverse.com/thing:44850 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=44850 Instructions Using the following options: barb_flatness_ratio = 3 cone1_wall = 2 cone1_min…
Made this so that I could mount my eSun eBox lite filament tube directly to the Y splitter I just printed. Now when printing with non AMS compatible materials, of any size without spool adapters as it has bottom rollers, I don't have to…
5in (5in I.D 5.12OD) 6in(6.12in ID 6.24in OD) 4.5in high. Designed to attach the Harbor Freight 2hp Dust Collector 5in inlet directly to the outlet of the Oneida 4/5 Super Dust Deputy cyclone. Print time with PLA and standard Cura…
4 pieces. Easy to attach (with small flathead screws) to a standard langstroth box. 14 5/8" minimum width. 3/8" holes for winter/ rodent control. Removable sliding door for transportation.
I needed an adapter to reduce 7" flex duct work to 6" for my woodshop dust collection system. Unfortunately the HVAC adapters were all too long to fit my need, plus were surprisingly expensive. I decided to design one myself and made a…
This is a simple reducer adapter for Xiaomi Mi Vacuum Cleaner mini.
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
An adapter to enable using a 50 mm axial fan on a 40 mm axial fan mounting. Due to space constraints, you will need to thread the 4 mm bolts into the plastic. Print instructions Category: 3D Printer Accessories
Reducer M22 M28 for saving attachment to bath faucet. Redukce M22 M28 pro spořící nástavec k vanové baterii.
English version below. Skischuh Volumen Reduzierer Diese Einlagen wurden mit 1mm PETG gedruckt und 1mm TPU darauf gedruckt. Wenn mit zwei Materialien gearbeitet wird bitte das Modell für den linken Schuh spiegeln. Modell: Schuhgröße ist…
A friend of mine shared a link to buy this kind of object, and I decided to make an easy to parameterize and 3D print version. ^w^ Usage: Simply press the object firmly onto the injection site (the side with the spikes facing the skin)…
Can only be printed with supports as shown in the picture Planning to buy something on Prusa3D.com? Use the referral code @FFFprint at checkout and get rewarded.
just a simple reducer from 25mm to 20mm for electrical PVC Conduit, printed in PeTG 60mm/s no supports fast simple. just print it! its quick :)
UPDATE 10/14/2026: I made some changes to the NPT library, so the relevant files were updated accordingly. ============================================================================ I wrote an SCAD tool for generating pipe threads that…
This video goes into more details about how these items are used. The Yarn Parker is device that clips onto the front of the EEW 6 eSpinner and helps hold yarn. The Slitted Reducer goes on the front as another option to park yarn…
The model is designed with FreeCAD and is parameterized, so you can easy adapt it to your own mouse gate.
Redukce na digestoř ze 150 mm na 120 mm . Reducer For Cooker Hood Vent Ducting 150 mm To 120 mm Pokud se ti model líbil dej mu like, díkes. If you liked the model, give it a like, thanks.
needed a 3/4 to 1/4 npt reducer for putting wire glands on outdoor electrical boxes, ended up making it w/ bpt close enough instead cuz multibillion dollar monopolies like autodesk cant be bothered to make their flagship cloud trash…
I had a Problem that Cardboard Spools triggers the MK4 Load Cell Sensor, because off the high force to unspool the filament. Cardboard spools naturally have significantly more friction than their plastic counterparts. This creates an…
The industry standard for microphone-stand mounting threads is 5/8"-27. European manufacturers, most notably "K&M König & Meyer", use 3/8"-16 threads however. This makes the american and european equipment incompatible and most american…
3D printed 1:10 reducer for crayford focusers Update History Update 2 : V2 now available here : V2 Crayford Focuser Reducer 1:10 Update 1 : Added a fillet on the reducer support + added all step files Informations The exact reduction is…
This is a simple reducer adapter for Xiaomi Mi Vacuum Cleaner mini with a 75 degree bending at its end.
This 2-in-1 duct reducer and elbow bend allows for reduction of ducting diameter from 6" (150mm) to 4" (100mm), while providing a convenient 90° right-angle bend. I designed this part specifically for use with my resin printer enclosure,…
Drops in, no extra hardware or work required. Print 100% infill with supports as labeled
I assembled an enclosure for my 3D printer and wanted to lead the toxic exhaust out of the house. I intended benefit from... a large fan for its power and potential of running more silent than a smaller fan smaller diameter tubes rather…
Use Case Wanted to utilize another print on a sander in the woodshop. My large vacuum is more then 10 ft away from sander. Decided instead of buying 20 ft of vac hose that I could just reduce and friction fit both hoses together. Prints…
I needed a hose adapter for my small Rigid 4Gal shop vac from Home Depot and couldn't find one, so I made it Printing x1c PETG: No supports Seam Position: random Layer: 0.2 Infill: 20% Wall Loops: 4
Lots of people have been saying this controller is almost perfect but has too much slop…so I decided to do something about it. ____________________________________________________________________________________________ I have 2 parts…
// Hole Reducer 2.0 (bugfix/remix of http://www.thingiverse.com/thing:788534 by lmx) // date: 2015may06 // ver: 2.0 // notes: default parameters create custom-designed replacement for BMW E36 center console front drink holder insert (BMW…
Various size reducer attachments designed to fit on my Ridged Shop Vac Draft angle measured from actual tool for a compression fit. Print fast if you want, no supports or complex geometry. I wanted the 0.5 inch internal diameter to suck…
for Game Face Trion dart blaster offset spring hook for the dart guide. This reduces the spring tension on the dart guide; I was annoyed by the resistance when closing the breech. prints without supports
Firstly, I do encourage you to please post your prints and comments/review on your thoughts and improvement ideas as well as like if you do like the model, It is much appreciated :-) Overview I printed a great model of the BL X1C Exhaust…
Simple pipe reducer. Originally made to connect an extractor hood to a ventilation duct, but handy for all sorts of ducting setups. The extractor - 150mm outer dia. Duct - 125mm inner dia.
This reduces ¾ inch locline down to ½ inch locline
AquaStar - Pool Umbrella Stabilizer Sleeve Reducer Adapter Basketball The standard AquaStar 5" SMUSxxx umbrella stand sleeve fits a pole diameter of 1.675”. I made an adapter reducing the hole size to 1.5”, plus a little 1.0mm wiggle…
Revised to be stronger. V2 here https://www.printables.com/model/1193245-shop-vac-exhaust-diffuser-baffle-v2 This is perfect for people who are tired of the shop vac exhaust blowing dust and debris everywhere. The exhaust on shop vacs…
Dust Reducer Adapter for Ryobi RTS12 Table Saw - from 4" Dust Hose to 2.5" (64mm) dust port. Prints with no supports needed. If you print with 0.3 layer height and 0.6 wall width, you can get a solid part with 2 outer walls right up…
shop vac reducer 1.25 in x1.75 in for accessories 100% infill print upside down to reduce support material
1/15/2025 - Added v2 model. Improvements: More secure fit around the wire guide Improved height - this should rest just under the flipper rubber, maximizing the ball surface contact zone without digging into or getting damaged by the…
I made a flow reducer for the AquaClear 20 hang on back filter. The aim was to make my Bettas new home more comfortable. ---------- V2 ---------- V2: better surface circulation - less circulation in tank Please leave a Like or a Make!
1-1/2" to 1-1/14" [1.5IN to 1.25IN] Pipe Reducer/Coupler/Adapter (No Supports) No Supports required. Used to couple and reduce 1.5" to 1.25" pipes or tubes. 3 Inches of clamp space on each side of the adapter.
This only fits centauri carbon 2 not the original carbon. The "left duct" is if you are standing in front of the printer and you want to exhaust to the left. the "right duct" is if you want to exhaust to the right depending on your room…
I've had issues with the original version of this restrictor modifier failing due to layers delaminating. Because of this I have re-modelled the complete restrictor and reduced the gate by 1mm. This makes it perform the same as the…
Reducer for PVC pipe fitting. 1" ID pipe to 3/4" ID pipe. Print with either 0.15 mm or 0.2 mm layer height. Used ABS filament.
The hole for the steam knob stem was pretty large and would allow for the wiggle of the knob. I designed this insert to reduce the hole size from 25mm to 20mm to help reduce the unwanted bending on the knob while turning. It was printed…
Ich wollte einfach ein bisschen mehr Wasser beim Duschen einsparen, daher habe ich mir im PrusaSlicer schnell einen simplen Druckminderer Ring erstellt und es klappte auf anhieb. Hab gleich mal drei verschiedene Lochdurchmesser (2, 3 und…
A small 12 too 1 RPM reducer for use with a TT gear motor. Small inline speed reducer. Youtube video of function and build can be seen here. https://youtu.be/01v10qvjFIA Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
G1/2 Female to G3/8 Male Reducer (BSP) is a practical and lightweight solution for those who need to adapt connections quickly and efficiently. Made from high-quality PETG – a resistant, durable material with excellent mechanical…
mount a 30 mm axial fan in place of a 40 mm fan. can be used if you want to reuse a 3010 heat break fan with a custom fan mount for 40 mm fans. tinkercad design Category: 3D Printer Parts
I made these chicken feeders: But rather than cutting a random piece of plastic, I designed and printed this. I printed mine out of ABS so I could use standard plumbing ABS cement, but ASA would work as well. Other materials will work,…
Flow reducer for the Grohe water flushing cistern. Replacement for model 42300000
Just a 3/4 inch BSP threaded tap pressure reducer. Probably want to fit it using some PTFE tape.
Just a quick design to solve this problem. This reduces the flows of my hob filter. Hooks into my 5mm tank. I tried it with a Aquaclear 600 and A596. Keeps my phoenix rasboras happy in a low flow environment, great for floaters plants…
![1-1/2" to 1-1/14" [1.5IN to 1.25IN] Pipe Reducer/Coupler/Adapter (No Supports)](https://media.printables.com/media/prints/467707/images/3833779_84360414-c412-4bb7-8416-d7704ab80c4f/f360.png)
