Search results: rippe

Sort order

1,001 models

P
PrintablesFabianVeile

Thin Grippers / Tweezers (Compliant Mechanism)

Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…

Downloads
1,573
Likes
422
Rating
4.69
P
PrintablesFabianVeile

Soft Robotic Gripper With Exoskeleton

Hello, this is a fully functioning soft robotic gripper. You can use it on its own or print the exoskeleton around it. You can use the exoskeleton to mount it to a robot. It has the dimensions of approx. 200 mm in diameter and 17 mm in…

Downloads
716
Likes
73
Rating
0
P
PrintablesFabianVeile

Bistable Compliant Robot Gripper

Hi, this is a prototype of a bistable compliant robot gripper. Each side can be actuated individually by sliding the actuator in the centre. It is still in an early stage and will change in future versions. Its dimensions are approx: 42 x…

Downloads
384
Likes
84
Rating
4.9
P
Printablesgruber

Bernoulli gripper (Bernoulliho chapač)

Podklady: [1] Festo Bernoulli Gripper OGGB: Festo Bernoulli Gripper OGGB - YouTube (funkce, vlastnosti a využití). [2] MYKHAILYSHYN, Roman a kol. Optimization of Outer Diameter Bernoulli Gripper with Cylindrical Nozzle [online]. [cit.…

Downloads
93
Likes
2
Rating
0
P
Printablesdick

Skadis T-Nut mount for Klein Wire Cutter and Stripper

This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…

Downloads
92
Likes
8
Rating
4.67
P
PrintablesBas

A (remix of) a gripper based on the fin ray of a fish tail

This is a gripper that bend around the stuff you pick up. It is based on the principal of the fin ray of a fish tail. See also this video of a (bit too old and dry) fin ray of a tilapia fish: https://vimeo.com/22739805 This gripper can be…

Downloads
77
Likes
11
Rating
4
P
Printablestim.dwertmann

Push-ups / Handstand gripper

Push-ups / Handstand gripper

Downloads
69
Likes
8
Rating
0
P
PrintablesHenk

Gripper for Leifheit Click System

We have a Leifheit telescope handle (Nr 41523, 135 - 400 cm) that we use to clean high windows. Also it can be useful for positioning something high up. For that I already created a universal hook…

Downloads
68
Likes
12
Rating
5
P
PrintablesMatthewGTaylor

Kalita Wave 155 Dripper Coffee Filter Crimp

I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…

Downloads
50
Likes
5
Rating
0
P
Printablesbuchnema

Replacement connector for Dickie Toys Mega Crane Gripper

Shortly after christmas we got the first accident. So I made this replacement connector for the gripper arm of the Dickie Toys Mega Crane . Print the part lying on its side for sufficient tensile strength. A small added support part…

Downloads
36
Likes
8
Rating
0
P
PrintablesZbyněk Král

JAR Dripper

No more wasted dish washing liquid! 👍💰 Print instructions: Material: PETG Layer: 0,15 mm Perimeters: 2 Infill: 25% Supports: No Brim: Optionally This model requires some special settings, more details in the attached 3MF file. Custom…

Downloads
31
Likes
7
Rating
0
P
PrintablesDevise3D

Rotating Gripper Vice Attachment

Enhance the versatility of your Portable Zyliss All-Purpose Vise with these 3D printable rotating grippers! Designed to hold pipes, dowels, and circular objects securely, as well as position square pieces of wood diagonally, these jaws…

Downloads
8
Likes
1
Rating
0
P
PrintablesBorderlands

Ripper Mask - Borderlands 4

The Ripper mask, an iconic piece of chaos from Borderlands 4 , is now available for 3D printing. We've designed it with handy attachment points for straps, making it easy to create and wear. AVAILABLE NOW! Get your copy of Borderlands 4…

Downloads
30,914
Likes
4,739
Rating
4.89
P
PrintablesDa_Rius

Wire Stripper Pro – Functional Maker Tool

This is my approach for a mostly 3D-printed Wire Stripper — a functional and robust tool designed to strip wires cleanly and consistently. I wanted to create something that anyone can use, whether you’re a maker, hobbyist, or handling…

Downloads
6,314
Likes
6,260
Rating
4.41
P
PrintablesPrintChallenge

Flexible Gripper

The gripper beaks can take the shape of the object they hold, like in this case an orange! Printing it is pretty self explanatory, or watch the short: https://youtube.com/shorts/1ziQGQiweF8?feature=share edit: Just to clarify this is not…

Downloads
5,438
Likes
1,325
Rating
4.5
P
PrintablesUFAB

Christmas nativity scene/Weihnachtskrippe

I used PLA filament for the model! Print: Nozzle 0.40 mm Layer height 0.2 mm Set the maximum print speed to 80 mm/s in the Prusa Slicer. Ich habe für das Modell PLA Filament verwendet! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa…

Downloads
5,013
Likes
736
Rating
5
P
Printablesrolli-on-fire

Snack Gripper - ergonomic snacking tongs/sticks

When I discovered snacking tongs on printables, I really liked the idea and immediatly downloaded and printed one. They served their purpose, but they just felt wrong between my fingers. They were too bulky, heavy and they used a lot of…

Downloads
4,502
Likes
982
Rating
4.87
P
PrintablesJan Štech

Blade Scraper, Saw Handle, Wire Stripper

Blade Scraper Print the Blade Scraper without top and bottom infill for such a beautiful design (honeycomb infill). You need to print the white ring 2x and insert it from each side into the hole. Additionally, you will need a utility…

Downloads
4,039
Likes
1,417
Rating
4.95
P
PrintablesJBoe

Wire Stripper / Cable-peeler / Kabel-Abisolierer

Object description: This wire stripper is as the title says, a tool which cuts in the outer insulation of a cable that you can easily peel it off. I made the experience that a lot of professional tools work with a spring mechanism and cut…

Downloads
2,900
Likes
445
Rating
4.84
P
PrintablesCmdrMoto

Gridfinity Nippers + Strippers + Pliers Racks

Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8 Find more Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Nipper Holder:…

Downloads
2,733
Likes
380
Rating
4.97
P
PrintablesFabianVeile

Keychain / fully working compliant Robot Gripper (bistable)

This is a fully functional bistable compliant robot gripper for your keychain. In its initial position the gripper is closed, when you push the switch in the middle upwards it snaps into its new position. This opens the gripper. The…

Downloads
2,675
Likes
488
Rating
4.71
P
PrintablesToby N.

Gridfinity Nippers Pliers Strippers Rack 2x2

Simple, space efficient storage solution for small pliers/nippers/cutters/strippers used in electronics. Two standard bins in the files, one fits up to 6 pliers with a grip thickness of up to 11.5mm (the right one in the photos) and…

Downloads
2,653
Likes
742
Rating
5
P
PrintablesNerlin

Tool Holders for Filament Cutters/Pliers and Wire Strippers for the Multiboard Storage System

For the Multiboard Storage System. The cutters fit standard filament cutters (Creality) or pointy nose pliers. The wire strippers fit the ones in the picture. It may or may not fit a different brand.

Downloads
2,634
Likes
347
Rating
5
P
PrintablesArmand

PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp

PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…

Downloads
2,348
Likes
1,583
Rating
4.91
P
PrintablesMichal Fanta

Wire Stripper

Printing All parts are printable without supports. Assembly

Downloads
1,885
Likes
556
Rating
4.81
P
PrintablesA-11 Designs

Robot servo motor gripper

Robot servo motor gripper

Downloads
1,832
Likes
218
Rating
5
P
PrintablesChris Borge

Heat Set Insert Torque Arm Gripper Insert Installer 9000

Vague for the next week im leaving for the outback in a few hrs. Requires a 65mm length .3mm thick brass strip 12mm wide and a way to drill a 3mm hole in it. Build Guide WIP sorry, but at least its here this time! Im back the 25th at the…

Downloads
1,478
Likes
595
Rating
5
P
PrintablesRitzy3DPrinting

wire stripper

this a remix of wire stripper. the extrra blade holder is added to keep the blade in place. Category: Hand Tools

Downloads
1,277
Likes
212
Rating
4.75
P
PrintablesMagmabow

Fish Lip Gripper

Print with PETG or ASA. 4-5 walls minimum - high infill recommended (especially for “Beam”) Hardware: 4x M3 hex socket screws (M3*14) 4x M3 nuts "Top" and "Handle" require supports on the inside. There is a 1mm clearance on there so left…

Downloads
1,256
Likes
858
Rating
4.64

Ball Gripper(funny golf ball holder gag gift)

it is a golf ball holder that looks like a nutsack when you put balls in it

Downloads
1,163
Likes
108
Rating
5
P
PrintablesNozzleSting

45° Winkel mit Verstärkungsrippen für Regale <<>> 45° angle with reinforcing ribs for shelves

(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…

Downloads
1,146
Likes
387
Rating
5
P
PrintablesOdevsa

Wire Stripper (Cutter Blade)

Wire Stripper (Cutter Blade) With just only 1 cutter blade, you can use 2 times in the Wire Stripper (Take a look on the pictures to see how you split the blade). You will need: 2x M4 5mm screw 2x M4 7mm nut Category: Hand Tools

Downloads
1,120
Likes
379
Rating
4.83
P
Printablesdweller

Pusi Negotiator for xBloom Studio Omni Dripper 2 (unofficial)

This is the Pusi Negotiator . An unofficially designed negotiator for wave filters to be used on the xBloom Studio Omni Dripper 2. Brewing note: I recommend either this recipe designed by @pradyboy for Moodtrap beans, for use with this…

Downloads
1,085
Likes
46
Rating
5
P
PrintablesPapaBravo

Rack & Pinion Robotic Gripper Jaw

Servo Controlled Robotic Gripper using rack & pinion drive for parallel jaw movement https://youtu.be/Qfd0ikdnAsg This is a robotic gripper/jaw that uses a low-cost Tower Pro MG996R servo. As opposed to some grippers that use a lever…

Downloads
1,010
Likes
35
Rating
5
P
PrintablesEvroc

Robotic gripper

3D printed powerful gripper mainly designed as a cheap tool for UR3e robot, however, because of the simple mounting system - you can adapt it to any robot. Printing instructions: The project can be printed with any material you like, just…

Downloads
992
Likes
108
Rating
5
P
PrintablesLong Eddy

Multiboard Vise Grip Wire Stripper (now with Multipoint)

This is a Multiboard hanger for the Vise Grip automatic wire strippers, inspired by “HSW Vise Grip Wire Stripper Hanger” from Tom Nardi.

Downloads
982
Likes
108
Rating
5
P
PrintablesTom Nardi

HSW Vise Grip Wire Stripper Hanger

This is a hanger for the Vise Grip automatic wire strippers, inspired by “Wire Stripper Holder for Hexagon Storage Wall (HSW)” from Phobos. While that design did work, the hanger was a bit too small, and I didn't like how the strippers…

Downloads
969
Likes
152
Rating
4.96
P
PrintablesRH3D

V60 coffee dripper

Slightly modified version of V60 coffee dripper that doesn't need supports (I changed the handle and the bottom part with smaller overhangs and separated rim), you just slide the rim on the body and eventually put glue to the joint if…

Downloads
933
Likes
93
Rating
4.2
P
PrintablesFrancesco Rubeo
Downloads
912
Likes
43
Rating
5
P

Nativity Scene (Weihnachtskrippe)

Nativity Scene in multiple Parts, some of them might be difficult to print with an FDM printer but not impossible. The Figures are connected in 6 groups which can be moved independent from each other. Figures: Maria Joseph Jesus Angel…

Downloads
875
Likes
123
Rating
5
P
PrintablesMakerS

Weihnachtskrippe - Christmas Nativity Set

Druck: Gebäude in mehreren Teilen gedruckt (PLA) Anschließend verklebt und mit Strukturpaste und Acrylfarbe bestrichen Technik: LEDs 3mm, verbunden mit “Technik”-Gebäude Steuerung in “Technik”-Gebäude: Arduino Mega und Raspberry Pi Pico…

Downloads
861
Likes
137
Rating
0
P
PrintablesErkHal

AR-15 mag stripper clip loader

This is a remix of a model which I cannot find anymore ! I've simply reinforced the stripper clip stopper since it seemed to break off when printed from PLA, and also added some hex patterning to the sides to provide some style points as…

Downloads
856
Likes
103
Rating
5
P
Printablesjayrunc

ragRipper rag cutter tool (rag ripper)

ragRipper tool for easy cutting and tearing up of old clothes into workshop rags. Easily replaceable utility ‘stanley knife’ blade. Can be flipped 180degress to change the cutting edge too. Designed to be assembled with M3 melt-in brass…

Downloads
821
Likes
160
Rating
5
P
PrintablesLoboCNC

Conformal Robot Gripper

This compact gripper has pivoting fingertips that conform to the object being gripped. Unlike parallelogram grippers, this provides a more secure grasp on irregular surfaces. And rather than using fixed pivots, each finger is actually a…

Downloads
807
Likes
76
Rating
0
P
PrintablesFabianVeile

Bistable Compliant Keychain Gripper

Hi, this is a tiny but functional bistable compliant robot gripper. It's some kind of simplified version of my other Keychain Gripper . It's great for fidgeting or tinkering around with bistable mechanisms. In its initial position the…

Downloads
799
Likes
127
Rating
4.81
P
PrintablesClearThread

Gridfinity Drop-In Tool Holder/Rack for Pliers/Side Cutters/Wire Strippers/Tweezers

A general-purpose easy-access tool rack built on the Gridfinity system. Intended to be a tool rack that fits most basic hand tools and prioritizes ease of access. Most side cutters will hold themselves by the handle, saving the tips. Most…

Downloads
791
Likes
126
Rating
5
P
PrintablesDa_Rius

Wire Stripper Pro – Step-by-Step Assembly Guide

Welcome to the assembly Steps and thanks for your interest! I’m happy to announce that the assembly instructions are finally here. The assembly guide ''videos'' are ready, and you can now assemble your Wire Stripper Pro (…

Downloads
780
Likes
191
Rating
4
P
PrintablesLovro Jančić

Robot Gripper

Easy assembly with 3mm screws UPDATE: I added the missing T coupler part and the grip strips (the red parts) which I printed in Fiberlogy Fiberflex 30D so they are soft and provide enough friction.

Downloads
767
Likes
145
Rating
5
P
PrintablesPrintedByMark

Tideripper from Horizon Forbidden West

The Tideripper is one of the most iconic machines of the forbidden west. While truly at home in the oceans, this machine is surprisingly agile on land. Really more than it should be. In any case, this sea monster is one of the biggest…

Downloads
765
Likes
110
Rating
5
P
PrintablesBYU CMR

Compliant Surgical Grippers

Summary These Compliant Grippers were created to further technological refinement in Minimally Invasive Surgery(MIS), offering the advantages of reduced wear, assembly, and recovery time. An example of a simplified compliant mechanism…

Downloads
759
Likes
125
Rating
4.46
P
PrintablesPhobos

Wire Stripper Holder for Hexagon Storage Wall (HSW)

Needs to be printed with an M3 insert from the original project. Holds a standard wire stripper/cutter. Most generic designs of this tool on Amazon seem to have the same dimensions (they're probably all made in the same place), so…

Downloads
725
Likes
119
Rating
5
P
Printablesjuiceboxjuice

Wire Stripper Holder Skådis Pegboard

Holds a wire stripper, the pictured wire stripper is 48mm at it's widest. 2 versions; with or without text.

Downloads
721
Likes
143
Rating
4.88
P
PrintablesRahul Sutar

Balsa Stripper

A must have tool for every balsa model builder. This tool helps you cut balsa strips with precise width everytime with square cuts everytime. Specifically designed for #11 surgical scalpel blade. Ergonimical design for ease of use while…

Downloads
714
Likes
50
Rating
4.71
P
Printablesinfiniteoffset

Wire Stripper Denuder for Scrap

Just made this simple guide for stripping wires and cables for scrapping copper. It needs to be bolted down with 5mm screws, then you just use the hole above to guide the razor blade and pull the wire through. Small model is for 3, 4, 5,…

Downloads
709
Likes
51
Rating
4.5
P
PrintablesFabianVeile

Bistable Compliant Robot Gripper (Fractal Fingers)

Hello this is a bistable robot gripper. It was one of the first 3d printing projects I startet after I bought my 3d printer. When the gripper is not activated, it is always open. When actuated, it closes and remains closed until it is…

Downloads
707
Likes
116
Rating
5
P
PrintablesMoe3D

Oni Mask No. 06 | Ripped Mouth with patches

Model No. 06, Oni Mask with ripped mouth that is patched. Free hand sculpted by me in Nomad Sculpt. Best printed in Resin, ABS Like if you have for additional strength, and upside down.

Downloads
698
Likes
107
Rating
0
P
PrintablesChewbugga

Mauser Kar 98k stripper clip

I only have two stamped sheet metal stripper clips for my 98k and I wanted a few more (without breaking the bank), so I did some tests… this is the 8th iteration so far and it works reasonably well. I closed off one end to stop the rounds…

Downloads
652
Likes
57
Rating
5
P
PrintablesAdnan Rk

robotic arm gripper assembly

This is Gripper Assembly from my "Low cost robotic arm project" you can check the project video here : https://youtu.be/2-MNlDSzeL4 Category: Robotics

Downloads
609
Likes
72
Rating
0
P
PrintablesDrabulok

USS Dripper – Universal Liquid Transfer Funnel

USS Dripper – Universal Liquid Transfer Funnel No space for waste. The USS Dripper is a two-part funnel designed to make transferring the last remains of thick fluids (like laundry detergent) from one bottle to another easy, clean, and…

Downloads
604
Likes
251
Rating
4.57
P
Printablessthone

Parallel Gripper for EEZYbotARM MK2

This is a remix of my Rov Manipulator (Parallel Gripper) modified to fit the EEZYbotARM MK2 robotic arm and be controlled by a servo instead of a rotating shaft. Use a SG90 Servo Hardware required (See pictures for screw layout.) All…

Downloads
593
Likes
47
Rating
5
P
PrintablesMiguel Camba

Gridfinity wire stripper/crimper/cutter tool holder

A 5x3 gridfinity tray (3 units deep) extruded to fit a very popular wire stripper / crimper / cutter model sold under many different brands with minimal variations. This model, and other very very similar ones, are sold under several…

Downloads
589
Likes
100
Rating
4.33
P

Fish Lip-Gripper - Save your thumbs from sharp teeth!

Normally after you catch a fish, you hold it up by the lower lip while you remove the hook and pose for pictures of your big catch. When you're out fishing for predatory fish, like big ocean fish, you need to wear gloves or use a tool…

Downloads
585
Likes
165
Rating
4.8
P
PrintablesHomeGrown3D

Ripster and Tripper Emek Etha2 Body by Muddy Bloody Factory

I am looking to grow my new channels! Give me a follow on youtube and mastadon and please feel free to say hello :) https://www.youtube.com/@homegrown3dprint https://mastodon.social/@homegrown3d Changelog: 3/14/22 refined eye cover area a…

Downloads
579
Likes
28
Rating
5
P
PrintablesCapt. Zelёniй

Wire stripper

Just a small remix of wire stripper based on classical design https://www.thingiverse.com/thing:2468753

Downloads
577
Likes
202
Rating
4.2
P
PrintablesJim

Gridfinity Plier-Stripper Holder

This 2x2X6U Tool Holder will hold four pairs of small pliers for electronics and/or jewelry making, and two pairs of Wire Strippers.

Downloads
575
Likes
86
Rating
5
P
PrintablesSandwitch

Gripper lamp 95mm

Gripper lamp based on a toy gripper like you see at fair grounds. (The final model is slightly different from the photo.) You also need: Bulb E27 95mm LED. E27 fitting. (38mmø) Screws M4x10. M3x10 for thumb screws (knobs). Thread rod M3…

Downloads
552
Likes
752
Rating
0

Fin Gripper (Robotic/Prosthetic Hybrid) - Mark VI

The Mark VI Fin Gripper - Black Ram Hand. This hand was designed to use the The Fin Ray Effect giving the wearer the ability to pick up soft or odd shaped items not able to be grasped by rigid claws or fingers. This can allow you to pick…

Downloads
529
Likes
171
Rating
5
P
PrintablesRon Mexico

Grr-Ripper Push Block Heel

This part uses an existing Microjig Grr-ipper and hardware to bolt on an additional bit of security. The part can slide up and out of the way, or slide down and grab the back edge of the board. If you keep the bolt loose, it can use…

Downloads
514
Likes
123
Rating
5
P
PrintablesVin Dinh

Saturn 4 and 4 Ultra HANDLE x DRIPPER V2

This is the version 2 which utilize all of your feedback together. While it is not recommended to print in 1 piece as the layer adhesion will reduce part strength and make it easy to break. Two part are separated as the original version…

Downloads
490
Likes
58
Rating
5
P
Printables🤖FPV

Omnia Dripper V3 Level Support Xbloom Studio

12/26/2025 Added V3 3 layer wall version after noticing that certain fillaments would break at the 2 layer transition point. Tolerances are tight! If it does not fit on the first try, scale up 1%. Material: PLA or PETG Layer Height: 0.2mm…

Downloads
489
Likes
31
Rating
5
P
Printableswizhack

Gridfinity Stripper pliers rack fit for drawers

This is my remixed version of Zack Freedman's gridifinity stripper holder rack which allows you to store pliers on the edge while closing a drawer, depends on your pliers size (tested on ikéa alex). 3 versions of this rack : 1x3u = 120 mm…

Downloads
468
Likes
63
Rating
4.82
P
PrintablesPaatryk93

Origami dripper holder/stand

Printed holder for origami dripper. Similar dimensions to the original transparent holder, it fits for sure for glass servers from Hario. You have to turn the model over and you can print without supports. I printed on Anet A8.

Downloads
456
Likes
24
Rating
0
P
Printablesmikeeel

3D Printer Flush Cutters grip / handle / Snips Wire Stripper Creality Ender 3 5 CR-10 CR-10S

mine oryginal rubber grips fall apart so i design better one Please, share your print in the comments. Thank you!

Downloads
456
Likes
51
Rating
5
P
PrintablesNozzle
Downloads
450
Likes
125
Rating
4.8
P
PrintablesTyler Jacques

XRP Robot Servo Arm with Grippers

Overview This model consists of a two-axis robot arm and a dual-jawed gripper allowing the XRP Robot to effectively manipulate objects. With this arm design, students leveraging the XRP robot platform can advance their programming…

Downloads
450
Likes
97
Rating
0
P
PrintablesZOHOZ

5.56/.223 REM cartridge stripper clip.

Description Stripper clip holds 10 rounds of 5.56/223rem or any other similar cartridge Intended for clip loader located here Print instructions No rafts No supports 0.20mm quality 15% Infill PLA + or better Thank you and happy printing!

Downloads
446
Likes
40
Rating
5
P
PrintablesTache

GRR-RIPPER Wall Mount - Micro-Jig

A vertical wall mount for the MICROJIG GRR-GRIPPER 3d push block.

Downloads
426
Likes
123
Rating
5
P
PrintablesHands on Katie

Wood Gripper Corner Clamp

Your workshop's new secret weapon for perfectly snug corners. This little marvel transforms any plywood or wood project from ‘meh’ to masterpiece with ease. Designed to caress plywood or wood into submission, achieving that dreamy…

Downloads
425
Likes
73
Rating
5
P
PrintablesSunShine

Print In Place PCB-Holder / Gripper

This is my print in place PCB-Holder, See it in action, and get all the info here: https://youtu.be/jN2l7cCoVB4 There is a GoPro-Mounted version, and a Stand version. (stand version has 70deg overhang, but it is printable with a standard…

Downloads
422
Likes
94
Rating
5
P
PrintablesLucMeister

Wire Stripper Holder for IKEA Skadis

I tried a few of these holders but none of them quite fit, either my pair of strippers or the Skadis pegboard. printing advice. I recommend at least 4 walls, infill doesn't matter as much (I did 20% gyroid). I printed it standing upright…

Downloads
416
Likes
47
Rating
4.92
P
PrintablesDIMMEL.design

Weihnachtskrippe – 5-teiliges Krippenset - Holz Optik

Diese liebevoll gestaltete Weihnachtskrippe besteht aus fünf einzelnen Figuren in einem modernen, minimalistischen Stil. Die schlichten Formen verleihen der klassischen Weihnachtsgeschichte eine zeitlose Optik. Das Set enthält: Josef mit…

Downloads
414
Likes
94
Rating
0
P
Printablesvelumagi

ripped dummy 13

It is a dummy 13 chest abdomen and upper arms that are really muscular

Downloads
392
Likes
120
Rating
5
P
PrintablesMadigan

Ultimate Snack Gripper Chopsticks

Features… Aerated handle with grip bumps for comfort, lightness, ease of handling and no-slip. Subtle, yet effective 3° bend at end of sticks for a solid grip on those snacks. Teeth at the very tip perfectly come together for picking up…

Downloads
385
Likes
56
Rating
5
P
PrintablesNightMyst

microJIG GRR-RIPPER-style Handle

I recently built a thin-strip cutting jig for my table saw, but it needed some kind of handle to safely guide it through the end of the cut. I own several Grr-Rippers and LOVE the comfort and safety they provide. I figured the handle…

Downloads
376
Likes
53
Rating
5
P
PrintablesSpitzspot

Kale and herb stripper

.200 mm, no supports New FDM bed adhesive: https://design-and-additive-manufacturing-services.square.site/product/p2b-weld/5?sbp=false Print instructions Category: Kitchen & Dining Print Settings Printer Brand: Prusa Printer: I3 MK3S…

Downloads
375
Likes
45
Rating
4.88
P
PrintablesM S

Cable-Slicer / Cable-Stripper / Wire-Stripper

I had a lot of old cables that I wanted to recycle at a scrapyard. To achieve a better rice, I freed all the cables on the sheath to get the bare copper. Unfortunately, the cheap cable strippers from the well-known online portals do not…

Downloads
374
Likes
56
Rating
4
P
Printablessthone

Rov Manipulator (Parallel Gripper)

This is a small Parallel Gripper that is used for a (Remote Operated Vehicle) ROV Manipulator. This is designed to fit a manipulator arm made from 1/2 PVC Pipe and activated with a geared motor spinning the shaft. These were designed to…

Downloads
365
Likes
39
Rating
0
P
PrintablesG33kt3ch studio

ripper fallout 4

This model was part of the #games2life project this year at ERRF2023. The model was printed by @gears3d and painted to match the game. Picture is of Gears print and added to this. Please go give @gears3d all the support for the great art…

Downloads
346
Likes
105
Rating
0
P
PrintablesBurak Fatih

Stanley Cable/Wire Stripper

You Need These Parts: 1xStanley Blade 2xM3 Screw 2xM3 Nut Blade Measurement: Added 2 M3 Screw support Optimized for ease of grip I recommend to print it with 0.12mm layer height I remix this model but i cannot find the original model…

Downloads
336
Likes
42
Rating
4.25
P
Printablesdaver18qc

Huina 1550 / 580 Ripper

Ripper for the Huina 1550 / 550 Excavator Needs (3x) M2x8 screws for the pads OR use it without pads for easier ripping in hard ground V2 corrects a clearance issue with my Spring Coupler ( https://www.thingiverse.com/thing:3732951 )…

Downloads
336
Likes
17
Rating
5
P
PrintablesVaughnR

Gripped Up Golf Club Holder

Added a handle to make this easier to carry on course. Gifted the printed version so have had to offer a render as the photo.

Downloads
333
Likes
32
Rating
5
P
PrintablesStigern

Ripped Capybara

💪 Ripped Capybara – The Chillest Gym Bro in the Animal Kingdom! Move over bodybuilders, there's a new alpha in town—and he's a capybara. Meet the Ripped Capybara! Few supports are needed. I used organic-style supports, which peeled off…

Downloads
326
Likes
27
Rating
0

Irrigraion halo dripper for plant wattering

This is dripper I designed for my hydroponics system. I use it with 10 cm (4 inch) rockwool cubes. External diameter is 7 cm. Printed in two parts: dripper and hose connector. Hose connector has to be glued to dripper. Holes has to be…

Downloads
324
Likes
61
Rating
5
P
PrintablesMeister Edel

Dragon Gripper Arm for Laparoscopic Trainer

Heyho For the MakerFaire in Hannover I did need some tools for the visitors to thest the laparoscopic trainer. https://www.printables.com/model/864261-laparoscopic-trainer-for-students-and-surgeons-col Sadly the tools my friend Allen Mehr…

Downloads
322
Likes
176
Rating
0
P
Printablesjohnzanussi

HSW Irwin Wire Strippers

Purpose built hook for hanging the Irwin VISE-GRIP Wire Stripper from the Honeycomb Wall Storage grid .

Downloads
320
Likes
66
Rating
4.83
P
Printablesnetwalk

Kleine Krippe, in Anlehnung an Ulrich Bernardi Krippenhaus (ANRI), altes Modell

Eine kleine Krippe, modelliert in Anlehnung an das alte Ulrich Bernardi Krippenhaus von ANRI . Die Höhe beträgt etwa 54 mm. Die Montageabstände sind auf 0.2 mm eingestellt, so dass auch Drucke aus nicht korrekt kalibrierten Druckern…

Downloads
316
Likes
36
Rating
5
P
Printablesjuh

Print-in-place flexure fin ray gripper

Fully printed, no assembly, print-in-place fin ray grippers, printed with plain PETG, no TPU flexible filament needed. The connectors are compatible with fischertechnik. The grippers' angle is 16°, so that you can use two Winkelsteine 7.5…

Downloads
313
Likes
33
Rating
5
P
PrintablesGregMM

Wire Stripper - Longitudinal - Parametric - Fusion 360

In my case I was trying to remove the thick clear insulation around the wires that I am reusing from some strippped direct burial 14 AWG wire. Adjust Wire_Diameter & RazorBlade_Thickness to match whatever your trying to strip and the type…

Downloads
313
Likes
39
Rating
5
P
PrintablesGp2mv3

Gardena micro-drip dripper (For 4.8mm tubes)

Small dripper or sprinkler (depending on the pressure in tube) for Gardena micro-drip systems. Print Settings Printer: Alfawise U20 Rafts: No Supports: No Resolution: 0.1 Category: Outdoor & Garden

Downloads
311
Likes
40
Rating
5
P
PrintablesRiffnshred

Skadis Automatic Wire Stripper Holder

This is a Remix from this model by lhomem : https://www.thingiverse.com/thing:4676186 And It uses these universal hooks from CSD_Salzburg : https://www.thingiverse.com/thing:2853257 It now fit flat to the board and I find it is a more…

Downloads
303
Likes
43
Rating
4.63