Search results: rui

Sort order

2,571 models

P
Printablessquinn

Fruit Fly Trap Mason Jar Lid

A helpful lid that you can screw onto a standard mason jar to create the perfect fruit fly trap. Put a bit of liquid bait inside (just about 5 mm deep), and place where it's needed. There are many commercial fruit fly liquid baits…

Downloads
10,441
Likes
2,007
Rating
4.9
P
Printableswedgeworks

Improved Fruit and Vegetable Washing Basin now with Southern Hemisphere support!

***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…

Downloads
6,099
Likes
997
Rating
4.9
P
Printableswedgeworks

Fruit and Vegetable Washing Basin from Thingiverse # 5685812

NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…

Downloads
3,605
Likes
1,664
Rating
4.67
P
PrintablesDanielAlex

Star Wars Arquitens Cruiser

This is a 1:2,000 scale model of an Arquitens-class Light Cruiser from Star Wars with two versions. The Republic Arquitens ("print_sw_arquitens-republic.stl") is based on its appearance in Clone Wars, the Imperial Arquitens…

Downloads
1,782
Likes
339
Rating
5
P
Printablesgbombadon

Roblox T-Rex Blox fruit

Yet another Roblox fruit model my son begged me to create. Rotate and print on it's base (horns printing up). I printed with no supports and with the top part laid flat in the same build as the base (see the gcode).

Downloads
1,608
Likes
63
Rating
5
P
PrintablesAeonfly

Fruchtfliegenfalle / Fruit fly trap

Diese kleine Falle im Apfeldesing lockt die kleinen Fruchtfliegen an und sammelt sie im inneren. Durch den Trichter wird ihnen der Rückflug erschwert. Im Inneren könnt ihr zb. in einem abgebrannten Teelicht Obst oder eine Mischung aus…

Downloads
1,450
Likes
164
Rating
4.92
P
PrintablesLocki

Past na octomilky na velký závit - Lid fruit fly Trap for glass with thread

Inspiroval jsem se u MatsErik Soda Bottle Trap , ale vymodeloval od nuly. Díky za inspiraci :) Vyrobeno ve Fusion 360. Nejlépe vytisknout žlutou, troška vína je asi nejlepší, nebo dejte do sklenice nějaké ovoce (banán a trošku octa pokud…

Downloads
1,026
Likes
89
Rating
4.97
P
PrintablesMikyner

Costa Atlantica cruise ship (MMU remix)

MMU remix Costa Atlantica cruise ship

Downloads
748
Likes
51
Rating
0
P
Printableserrno

Fruit bowl

Fruit settings: 0.2mm layer 15% infill Bowl settings: 0.2mm layer 30% infill support in three places Printed with Prusa MK4. Thanks @FaultedLogic for your models. They are very good :-).

Downloads
620
Likes
222
Rating
5
P
PrintablesEddy

Case for Adafruit 1.8 Color TFT LCD display with MicroSD Card Breakout ST7735R

This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…

Downloads
610
Likes
22
Rating
5
P
PrintablesTom Mullebrouck

Raspberry Pi 4 + Adafruit 3.5 tft case with fan

This is a case for the raspberry pi 4 with an adafruit 3.5 tft screen. In the bottom of the case, you can use a noctuna fan NF-A4x10 5V. I used a 5V fan, so I can use the voltage of the USB port. The bottom and top is clicking, no screws…

Downloads
494
Likes
55
Rating
5
P
Printablesollinek

Mason jar fruit fly trap

All the models for this I found used too much material and took way too long to print so I made my own Requires bait to be placed into the jar, watermelon has worked for me in the past. It does not require supports Example printed at…

Downloads
394
Likes
71
Rating
4.75
P
PrintablesDanielAlex

Star Wars MPO 1400 Purgill Star Cruiser

The MPO 1400 Purgill-class Star Cruiser is a Passenger Liner from the High Republic Era. This is a model at 1:2,000 scale. It is 150mm long, 50mm wide and 44mm tall. The antennae are printed separately. There is a small notch at the base…

Downloads
376
Likes
71
Rating
0
P
Printablesbaumwasser

Piggy Bank Lid for True Fruits

A simple piggy bank lid for the big (750ml) true fruits jars. Printed on a Mini+ with PLA.

Downloads
339
Likes
40
Rating
4.83
P
PrintablesAbed Shehadeh

Devil Fruit Stand

an easy print stand from three separated part can be joint as Lego part, to hold devil fruits or any other spherical shape…. its work with heart shape. the idea come from sheep moon i booth last year have a so simple stand. print it with…

Downloads
291
Likes
42
Rating
3.67
P
PrintablesIce

Rocket Fruit from Blox Fruits

The image compares the size to a track pad. As you can see, it is quite small. Supports are required. The stem might break off while removing supports, so be careful. If it does break, you can use a 3D pen to weld to the model.

Downloads
274
Likes
12
Rating
0
P
Printablesgbombadon

Venom Fruit

Blox fruits Venom Fruit Supports - yes

Downloads
257
Likes
16
Rating
0
P
PrintablesRon Harding

Wet Sharpener Stone Truing Jig

Mine is one of these MAXIMUM sharpeners from Canadian Tire. There are similar sharpeners from many other brands (Grizzly, Craftex, King Canada), they probably all come out of the same Chinese factory. But Tormek is the Cadillac in this…

Downloads
224
Likes
40
Rating
5
P
PrintablesART TOO

FRUIT PICKER - HARVESTING TOOL - (Tested)

Easy to use tool for harvesting your fruit

Downloads
203
Likes
39
Rating
5
P
PrintablesSpacehuhn

Adafruit Trinkey QT2040 Case

A simple cover for the Adafruit Trinkey QT2040. For making a DIY USB Nova: usbnova.com But I also included a version of the case without the NOVA text printed on it, so you can use it for any project. You also need 4x M2.5 4mm screws to…

Downloads
199
Likes
12
Rating
5
P
PrintablesDanielAlex

Star Wars Longbeam Cruiser (Type A)

“[…] the Republic's workhorses: Longbeams. Versatile vessels, each able to perform duties in combat, search and rescue, transport, and anything else their crews might require.” [ Charles Soule: Star Wars Light of the Jedi, Chapter Four ]…

Downloads
172
Likes
26
Rating
0
P
PrintablesDanielAlex

Star Wars Third Horizon Emissary-class Heavy Cruiser

"It spoke of ambition. It spoke of optimism. It spoke of a thing made beautiful because it could be, with little consideration given to cost or effort. The Third Horizon was a work of art, symbolic of the great Republic of worlds it…

Downloads
169
Likes
26
Rating
0
P
PrintablesKuberman

Cherry / Berry / Fruit Picker - Gardena Adapter

I bought a Gardena berry picker but didn't have a Gardena telescopic pole. I did, however, have a paint roller extension pole. So, instead of the adapter for the Gardena system, I printed a different adapter. This one attaches with the…

Downloads
167
Likes
91
Rating
5
P
PrintablesDiastako

Lemons (and other fruits) collector, picker

Tool to be fixed on a pole with Vileda type thread which allow you to collect lemons (and other fruits) from quite height trees. Quite a long time print, but if you have a lemon (or other similar) tree in your backyard it will facilitate…

Downloads
149
Likes
18
Rating
4.5
P
Printableskrypto elia

Berry and Fruit Washer with Drainer

Introducing the 3D-printable Berry and Fruit Washer with Drainer , a two-part kitchen essential designed to simplify your fruit washing routine . The innovative design includes a base where water collects and an upper compartment with…

Downloads
141
Likes
48
Rating
0
P
PrintablesAhmad

Toyota FJ Cruiser Custom 4WD Shift Lever (2.0) | TRD Edition

TOYOTA CUSTOM 4WD SHIFT LEVER (2.0) ……………………………….. ERGONOMIC Curved design hooks to the hand, easier to handle compared to the simple cylindrical shape. OEM INSCRIPTION Directions for shifting gears on top, just like the factory.…

Downloads
140
Likes
19
Rating
0
P
PrintablesLuis

True fruits bottle drying stand / True fruits Flasche Trockenaufsteller

I have a small collection of true fruits bottles and I reuse them regularly. I wanted to have a drying stand for them just like the one for the Soda Stream bottles I designed. So I adapted the design to fit the true fruits bottles. There…

Downloads
130
Likes
23
Rating
4.75
P
PrintablesDanielAlex

Star Wars Pacifier-class Sector Patrol Cruiser

The Pacifier-class Sector Patrol Cruiser was a very popular warship during the High Republic era. It has a crew of 100. Known Pacifier-class Cruiser are the Marillion (Light of the Jedi), Yekkabird (Light of the Jedi), Galliance (Shadows…

Downloads
122
Likes
18
Rating
0
P
PrintablesIBNobody

Raspberry Pi 4B + Adafruit 3.5 TFT Case + Tabletop Mounting Brackets

I remixed the original case and thickened it enough to allow for the fan to be mounted inside. I also added a ribbon cable tab below the Pi's USB connections. With the added thickness, I was able to pull the ribbon cable out vertically…

Downloads
121
Likes
20
Rating
5
P
Printablesishikawats

Opera Fruit Fly Trap

This is a fruit fly trap, reminiscent of the iconic Sydney Opera House. It screws on as a lid on standard 50 mm diameter glass jars. Taco sauce, jam and Dijon mustard are products commonly sold in this smaller jar size. I fill mine with a…

Downloads
120
Likes
34
Rating
4.75
P
PrintablesJasper Boer

cruise control motorbike 22mm handlebar. gcode is ready for cr/bl touch. use 3mf file!!!

cruise control for bikes without it, for 22 mm handlebars but you can scale it. i have not printed it so i dont know if it will work in pla. i reccomend putting some tape or something rubber on the handle bar to not damage it.

Downloads
110
Likes
7
Rating
0

Classic cruiser FJ45 Scx24 Deadbolt body shell.

Might have to fix some issues but easy and cheap to print.

Downloads
99
Likes
11
Rating
0
P
PrintablesDanielAlex

Star Wars Rathtars Revenge Pirate Cruiser

The Rathtar's Revenge was a pirate flagship used by the Ganguls during the High Republic Era. It appeared in Season 2 of Young Jedi Adventures. Dimensions Length Width Height 185mm 112mm 56mm There are no official dimensions for this…

Downloads
95
Likes
13
Rating
0
P
PrintablesAhmad

Toyota FJ Cruiser Custom 4WD Shift Lever

Note: There are two different versions, one with TRD marking on top and one is without. Background: My 4WD shift lever was making an annoying rattling noise, turns out I over-tightened it and something broke inside. With the lever's…

Downloads
94
Likes
18
Rating
0
P
PrintablesAryser

Fruit Fly/Wasp Trap for PET Bottle

Be award, insects belong to the ecosystem like all beeings! Print in one or two colors. The colour of the cap might influence the success rate. Fruit colors like yellow orange should be best. After printing clean the entering tunnel. Any…

Downloads
93
Likes
19
Rating
0
P
PrintablesSabre19

Adafruit Heat Set Insert Press Tri-Bearing Plate (+2mm)

This is a modified version of the “roller plate” 3D-printed part for the Adafruit Heat Set Insert Rig (https://learn.adafruit.com/heat-set-rig). The BOM for the rig calls for “3x 625Z ball bearings with wheels” from Amazon (…

Downloads
87
Likes
17
Rating
5
P
PrintablesW

TOYOTA Land Cruiser 250

Designed with color changes at 1.2mm, 1.8mm and 2.2mm. Color order is Black, (Body Color), Gray, Orange. Happy Cruising!

Downloads
84
Likes
7
Rating
0
P
PrintablesMaWoKo_3D_Druck

True Fruits Trichter/Funnel 750ml November 24

True Fruits Trichter für die 750ml Flasche gedruckt mit 15 Prozent infill und der 0,4 hf nozzle gedruckt. über likes makes und follower würde ich mich sehr freuen, Peace MazZe

Downloads
73
Likes
10
Rating
5

Ruined Wall Pack

I did not make these files. I'm only bringing them to this platform. The original files can be found here: https://www.thingiverse.com/thing:3555036 This is a ruined wall pack, intended for 15mm gaming, namely FoW. can be scaled for use…

Downloads
71
Likes
18
Rating
0
P
PrintablesvmLOGIC

Fruit Bowl "Sandy Melon"

This fruit bowl comes in a modern design. The "Sandy Melon" is quite large and can easily hold several kilograms of fruit. It is easy to print and easy to assemble. No screws, no glue required. Why "Sandy"? To give the fruit bowl more…

Downloads
66
Likes
17
Rating
0

Rebel/Empire Adafruit Circuit Playground Case

Need to secure your Adafruit Circuit Playground Express (CPX) from the hands of Rebel Scum? Or keep the Empire from stealing yours? This case will hold a CPX with holders for threaded inserts and a snap fit cover with the logo of the…

Downloads
55
Likes
8
Rating
0
P
PrintablesXaldew

Sirui VH10 Rosette Adapter

I've owned the Sirui-VH10 tripod head for a while now, and while it's a good product, I felt that the 'rosettes' (i.e., Hirth joints) were a bit under-used. By default, it is only used to attach the camera handle on one side of the…

Downloads
50
Likes
5
Rating
0
P
PrintablesvmLOGIC

Fruit Bowl "Salty Apple"

This fruit bowl comes in a modern design. The "Salty Apple" is the medium sized version from my collection. It is easy to print and easy to assemble. No screws, no glue required. Why "Salty"? To give the fruit bowl more weight, I have…

Downloads
49
Likes
22
Rating
5
P
Printablesbenedy

Boston Bruins plaketa

Plaketa na zeď 210 mm

Downloads
49
Likes
9
Rating
0
P
Printablesvilerage

120mm fan powered fruit fly trap

A fruit fly trap powered by a 120mm pc case fan. Put duct tape on the round side, with the sticky side facing in. Trim the duct tape flush. PC case fan should be blowing into the 3d print. Print with supports.

Downloads
45
Likes
7
Rating
5
P
PrintablesDanielAlex

The Owl House Tents and Ruins

Model of the ruins, tents and a tree from the Knee from The Owl House, S01E12 Adventure In The Elements . Print Instructions Everything was printed at 0.2mm layer height. Part Dimensions Supports ruin wall 151mm x 16mm x 82mm yes, organic…

Downloads
41
Likes
14
Rating
0
P
PrintablesPeter Farell

Fractal Fruit Bowl

Fractal Serving Tray. Fruit Bowl.

Downloads
40
Likes
12
Rating
0
P
PrintablesNordheim

Knog Plus mount for Micro Cruiser Scooter

This is a remix of: https://www.thingiverse.com/thing:4608611 Material needed: Magnets Ø6mm. I used 2x 6x3 magnets. Screw M6x16 or M6x20. I replaced the original screw with this one. The magnets are press fit. Printed with Petg.

Downloads
40
Likes
5
Rating
0
P
PrintablesprotoZ

Fruit basket

This is a fruit basket, but you can also use it to carry things. It fits perfectly with a MK4 plate. You can print it in PLA.

Downloads
37
Likes
12
Rating
5

Watermelon Fruit Marker

If you're like me you plant a lot of seeds in your vegetable garden and forget what you planted where. I made these to help me remember. Included is a gcode for a Elegoo Neptune 4 using PETG. In order to get the correct colours you have…

Downloads
33
Likes
6
Rating
0
P
Printables郑 伟

Hollow fruit bowl

Print size 200x200x108 Height 0.02 Filling rate 25%

Downloads
28
Likes
5
Rating
0
P
PrintablesTactile Dream

Naked Juice Bottle Fruitfly Trap

A fruitfly trap made by upcycling a Naked Juice bottle and optionally a milk straw.

Downloads
23
Likes
3
Rating
0
P
PrintablesSuper7

Adafruit Perma-proto Breadboard Case

Adafruit Perm-proto Breadboard Case with header pin breakout and second removable breakout zone. Print in PETG 0.2mm layer height, 25% infill. No support required. No fasterners required, lid snaps on Mounting holes for 8G wood screws

Downloads
21
Likes
4
Rating
0
P
PrintablesBenni

LED Blocker Koorui 3,8 mm x 2,5 mm

I designed this to block the white led that indicates sleep on the Koorui Monitors. I find this uncomftorble to sleep. These just slot over the existing light. Print in very fine resolution (0,1). The model is very fast, so you are done…

Downloads
20
Likes
1
Rating
0
P
PrintablesSTSUL.CZ

bowl for wall mount - good for keys, fruits ..

no problem to send a model without wall mounts, leave me a message

Downloads
19
Likes
1
Rating
0
P
Printablesvilerage

Adafruit 5" 800x480 display mount

Mount for the Adafruit Industries HDMI 5" 800x480 Display Backpack - With Touchscreen. I got mine at Microcenter: https://www.microcenter.com/product/613550/adafruit-industries-hdmi-5-800x480-display-backpack-with-touchscreen SKU was…

Downloads
16
Likes
2
Rating
0
P
PrintablesJoop

Stop vaas bruin tbv solar paneel

Deze stop gemaakt om in de vaas wat led-lampjes gevoed door een zonnepaneeltje te plaatsen.

Downloads
13
Likes
0
Rating
0
P
PrintablesTactile Dream

Naked Juice Bottle Fruitfly Trap Magnetic Mount

Magnetic mount for holding a Naked Juice Bottle Fruitfly Trap to a ferrous surface. Also capable of holding a Gatorade Bottle Fruitfly Trap .

Downloads
12
Likes
0
Rating
0
P
PrintablesGary

Adafruit QT Py RP2040 PIN Guide

This is a 3D print to accommodate a breadboard to help program an Adafruit QT Py RP2040. I placed the controller 7 PINS from the right of the side of the breadboard. The large labels helps to identify which PINs are what. In the STLs,…

Downloads
10
Likes
1
Rating
0
P
PrintablesMaty1987

Adafruit Voltage booster/Regulator PCB Enclosures

adafruits voltage regulator/filter PCB enclosure with 4 pin Connector fitted Header, Vertical, 4 Way - Jst (japan Solderless Terminals) | CPC Connector Housing, 4 Way - Jst (japan Solderless Terminals) | CPC Crimp Terminal, XH, 28-22AWG -…

Downloads
10
Likes
2
Rating
0
P
PrintablesDonoph3D

Corbeille à fruit - Moderne

Hey les makers ! Je vous propose aujourd'hui à la créations une corbeille a fruit moderne ! Il m'en faillais une alors je me suis lancer la dedans. Personnellement, je l'es réalisé en PETG mais libre à vous de le faire en PLA+. Bonne…

Downloads
9
Likes
0
Rating
0
P
PrintablesRoman Huante

Raspberry Pi and Adafruit Perma-Proto Board Case for Prusa i3MK3

Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: The main…

Downloads
9
Likes
0
Rating
0

Naked Juice Bottle Fruitfly Trap PS:1 Magnetic Mount

Magnetic mount for holding a Naked Juice Bottle Fruitfly Trap to a ferrous surface with a PS:1 logo.

Downloads
9
Likes
3
Rating
0
P
Printableslame

Bike / MTB Thru axle / Quick Release adapter for truing stands

I own an old truing stand, which supports Quick Release Wheels only. Therefore I developed some "dummy thru axles" which can be used as a adapter for this truing stand. The dummy axles have a handle at one side for a easier…

Downloads
7
Likes
0
Rating
0
P
Printablesh2odragon

Fruit of the Tomb sign

100x160mm sign, with art of a mummy and text “Fruit of the Tomb” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . You…

Downloads
4
Likes
2
Rating
0

Fruit washer bowl

🏆 Thrilled to share that I've been nominated for Platform Designer of the Year at the 3D Printing Industry Awards 2026! If you enjoy this model, I would be incredibly grateful for your vote. [Click here to vote for Thorin Oakenshield]…

Downloads
32,709
Likes
5,284
Rating
4.91
P

Automatic vegetable and fruit washer- no supports and no assembly required. Small and large sizes

Modeled from scratch, inspired by lwx007's design: Thingiverse #5685812 I saw some comments about difficulties with the original model requiring assembly or gluing, and decided to make a model that can be printed in a single piece and…

Downloads
31,734
Likes
3,581
Rating
4.86
P
Printablesklworx

Fruit Fly Trap

Fruit Fly Trap with Secure Lid A compact and functional fruit fly trap designed to blend practicality with modern style. The container features a sleek hexagon-patterned body for a clean geometric look, while the textured lid provides a…

Downloads
13,464
Likes
4,021
Rating
4.59
P
PrintablesProtyle Designs

Modern Fruit Bowl / Decor | Filte II

Modern style fruit bowl with an optional insert! Takes a firm push to get the insert in. Don't worry, you won't break it🙂…However, it's hard to get out lol

Downloads
10,090
Likes
2,019
Rating
4.95
P
PrintablesJarda Linek

Fruit fly trap

Návnada - řezané kuličky hroznového vína

Downloads
5,284
Likes
712
Rating
4.93
P
PrintablesApophisPrints

HydroSpinner Family Size Water Powered Fruit/Berry Washer

This automatic fruit and berry washer is lightweight for its size, requiring less than 200g of material to print, and performs exceptionally well Simply turn on the water, and it handles the rest efficiently. It is ideal for fruits,…

Downloads
4,990
Likes
1,205
Rating
4.89
P
PrintablesTerrain4Print

Ulvheim building and ruins - A

This is the first Ulvheim building. Stone buildings suitable for medieval or fantasy scenarios. There is one intact two level building (no roof though) and several ruined versions. You can put almost any second level ruin on top of the…

Downloads
4,868
Likes
981
Rating
4.83
P
PrintablesDusty

Gura Gura No Mi (Tremor Tremor Fruit) - One Piece

The Gura Gura no Mi is a Paramecia-type Devil Fruit which allows the user to create vibrations, or "quakes", making the user a Tremor Human. It was eaten by Edward Newgate, but upon his death, its power was stolen by Marshall D. Teach. A…

Downloads
4,578
Likes
577
Rating
4.86
P
PrintablesAnneVanLeyden

Turn any jar into a fruitfly trap

This parametric OpenSCAD model allows you to generate a fruitfly trap for any jar that you have lying around. Measure the outside diameter on the thread as shown in the picture. There will be an extra 0.5 mm of clearance added in the…

Downloads
4,246
Likes
2,804
Rating
4.88
P
PrintablesSabre Design

Modern Fruit Bowl

A modern fruit bowl, 228mm long, 253 mm wide and 66mm high Print with a brim. to fit it on a standard prusa MK3 or 4 scale the model to 92% If you want to support me or get commercial licenses you can join a patreon membership:…

Downloads
4,090
Likes
917
Rating
4.89
P
PrintablesPaqdoq

fruit washer

fruit washer for fruits. wash your fruits easily

Downloads
3,662
Likes
760
Rating
5
P
PrintablesTeirale

(18) Druid - Male - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…

Downloads
3,637
Likes
381
Rating
5

Bike wheel truing tool

Wheel truing tool for bike mechanics designed for the needs of Gambian bike workshops, where getting a commercial jig is difficult. Can be used to trim the front or rear wheel. Print instructions Prusament ASA, 0.3mm layer height, 100%…

Downloads
3,553
Likes
928
Rating
4.69
P
Printablesgbombadon

Kitsune Roblox Fruit

First attempt at modelling the Kitsune Fruit from Blox fruits in Roblox. I was begged by my Son to try this and pretty happy with the model. Printed with no supports OK, but getting some stringing problem with the top pointy bits that I…

Downloads
3,192
Likes
121
Rating
5
P
PrintablesWilko_SLO

Fruit picker

This fruit picker you can use with universal paint teleskopic stick, or you can use with any other stick from the nature. For basket You can use any cotton bag. The best one is mesh bag, that you see what you get into the bag. Tested with…

Downloads
3,093
Likes
266
Rating
4
P
PrintablesMZ4250

Druid Collection

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
3,062
Likes
291
Rating
5
P
Printables3Diocrity

Motorcycle Throttle Stop (Cruise Control)

Modeled in F360 after the original Go-Cruise (now out of production), this is a throttle stop style cruise control for motorcycles. You simply roll the throttle back and press this against the brake lever. This is sized for a sport style…

Downloads
2,808
Likes
323
Rating
4.94
P
PrintablesCory McDonald

Barrel stand for one piece devil fruit

needed something to set devil fruit on, may need to be resized for some models i sized it to fit 3.5 inch spheres .16 layer 15% infill no supports

Downloads
2,806
Likes
636
Rating
4.93
P
PrintablesMatsErik

Fruit Fly Trap for Soda Bottle

Print it in yellow, fill bottle with some orange juice (and a splash of vinegar) - fruit flies like yellow a lot

Downloads
2,782
Likes
377
Rating
4.74
P
PrintablesBarney123

fruit and vegtable washer and dryer

fruit washer and drier. small and large. can also do vegetables.

Downloads
2,501
Likes
537
Rating
4
P
PrintablesMZ4250

Druid Collection

Druids for all your TTRPG needs

Downloads
2,435
Likes
239
Rating
5
P
PrintablesTerrain4Print

Gothic sci-fi ruin

Print your own gothic sci-fi ruin city. Everything prints without support. Every level with a floor is separate with big pegs and holes to keep them aligned without glue. A quick and easy method for painting them:…

Downloads
2,403
Likes
441
Rating
4.71
P
PrintablesLuis Flores

Logo Un Poco De Ruido

Logo de un poco de ruido, separado por colores y tambien en un solo archivo con distintas alturas por color

Downloads
2,376
Likes
20
Rating
5
P
Printables3D2H

Fruit and Vegetable Washing Basin

I liked the design and idea, but I definitely don't like supports and multi-part designs unless necessary.

Downloads
2,322
Likes
215
Rating
5
P
PrintablesDeimosfr

The forbidden fruit

Do not eat the forbidden fruit! Perfect decoration for Halloween. You can find the 3MF version ready to print.

Downloads
2,301
Likes
711
Rating
4.94
P
PrintablesMZ4250

Druid Collection 3

My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…

Downloads
2,287
Likes
194
Rating
5
P
PrintablesMartin

Raptor Class Light Cruiser From the Expanse

This is my model of the Raptor Class Light Cruiser from the Show the Expanse. This ship appeared as the infamous Pella in the Free Navy colours. I however made it in its original MCRN colours and with my own name. (The colour structure is…

Downloads
2,174
Likes
561
Rating
5
P
PrintablesTeirale

(28) Druid - Female - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…

Downloads
2,120
Likes
215
Rating
4.92
P
PrintablesMatsErik

Fruit Fly Trap for Soda Bottle

A trap that works. Those nasty little buggers love getting in, have no clue how to get out

Downloads
1,993
Likes
236
Rating
4.88
P
PrintablesMartin

Ancient Cruiser from Stargate

This is my model of the Ancient Cruiser from the Stargate Atlantis. The ship appeared only briefly in the episode Progeny. It is a kit, no glue required. The assembly is very easy but iI recommend to look at the assembly video just to be…

Downloads
1,985
Likes
444
Rating
5
P
PrintablesLord_Vader

Fruit Fly Trap Fruchtfliegenfalle Fully Printable

ENG: Add some juice and get rid of those nasty bugs. You dont need to add much... the funnel is very deep.

Downloads
1,935
Likes
82
Rating
5
P
Printablescryptomilk

Vortex Fruit Washer (Improved)

I like the vertex fruit washer from Perinski , but it requires support for nearly the complete bottom. This model is a fixed version. It requires minimal support and prints nicely. If you wonder if this really works, it does. Kids love…

Downloads
1,920
Likes
234
Rating
5
P
PrintablesFatesEnd

Night Elf Druid Cat Form

I love World of Warcraft and Druid's are my favorite... Well, Night Elf Druid CATS are my favorite! I modeled this in ZBrush and printed it on my Shuffle XL. Lastly, I painted it using Citadel Paints (the best paints for models!) FOR THE…

Downloads
1,883
Likes
365
Rating
4.78

Fantasy Ruin DryPalette Addon for The Army Painter Wet Palette

This is an add-on for the Army Painter Wet Palette with different forms to test the amount of paint on the drybrush before switching to your precious models. Specifically with parts and features from my fantasy ruins sets: Base set…

Downloads
1,881
Likes
195
Rating
5