Improve Microtik CRS310 cover with 140mm fan
Custom cover to improve Microtik CRS310 cooling and meaningfully reducing noise by replacing the original 40mm DC fan with a pc case 140mm one.
- Downloads
- 143
- Likes
- 6
- Rating
- 0
Counting matching models…
Custom cover to improve Microtik CRS310 cooling and meaningfully reducing noise by replacing the original 40mm DC fan with a pc case 140mm one.
Farben 1 Galaxy Silber https://www.prusa3d.com/de/produkt/prusament-pla-galaxy-silver-1kg/ 2 Anthrazit https://www.dasfilament.de/filament-spulen/pla-1-75-mm/444/pla-filament-1-75-mm-anthrazit-v2?c=11 3 Schwarz…
A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to…
The L3Harris Binocular Night Vision Device, also known by the military nomenclature AN/PVS-31A, is a compact, lightweight, Generation III high-performance white phosphor dual-tube goggle……But this thing is only a model, if you want to…
Both Rochas313 and Geometry John Doe Skins for the silly fans. :3 Print in PETG or get IMPLAED. Or tree'd idk. (MEGA-UPDATE 11/21/25: Added new joint design)
This is rack mount tabs for a Netgear GS316 series switch. The rear bracket uses M3 screws to replace the existing screws in the back of the switch.
This pogo-pin clip is designed to facilitate the reprogramming of the Sonoff S31 module without the need for soldering to the pads on the circuit board. The pogo-pins I used are 0.68 mm in diameter and 16 mm in length. The holes needed to…
I created mounts for Natalie T 's Modular 10 Inch Server Rack to mount MikroTik hAP ax³ and CRS310-1G-5S-4S+. The Mikrotik hAP ax³ uses a transparent base for the body of the access point that allows the device to be mounted horizontally…
I designed this case that's inspired by visual futurist artist like Syd Mead and John Eaves. Not your typical boxy type case for a piece of audiophile equipment. This is meant to make it standalone and have a visual impact with futuristic…
Compatible batteries are already available to buy on eBay. However, I already had components to make my own, and I enjoy designing things so I made this. I was also able to make a few of these for the price of one on eBay (since I already…
The switch itself is 1U-sized and even comes with hardware mounts for a 19" rack installation, but the 10" rack mount accessory is extra. With this mount you can utilise one of the included rack mount ear brackets to mount the switch to a…
I found that most 3D printing 19 inch server rack holder designs for Netgear GS316EPP and GS316EP 16 Port Switches were either too large for my heated bed (23.5 x 23.5cm) or had too much unused space . So I decided to make one of my own,…
Custom cover for the Microtik CRS310 to accommodate 120mm computer fan. Printed with PLA or PETG with support on build plate only. (Fan cover model: https://www.printables.com/model/334447-hex-fan-cover-120mm)
This is a small clean-up of DreadedBunny's S31 programming clip to avoid overhangs and abrupt direction changes on the initial layer (which can compromise adhesion).
Designed to work with the one unit version of Bosch GSR 12V-15 Battery Screwdriver Holder ( https://www.prusaprinters.org/prints/6320-bosch-gsr-12v-15-battery-screwdriver-holder ) to mount the Bosch PS31-2A Drill (…
Custom cover for the Microtik CRS310
Holder to mount NetGear GS316 Switch in 19" rack. Print 2, one for each side. For ekstra security, add a large zip tie to hold the ears to the switch while mounting it to the rack, once it's mounted it should hold it self. print with the…
A simple wall mount for your Mikrotik CRS310-8G+2S+IN. One for each side.
Parametrizable 10 inch and 19 inch rack mount for - FritzBox 6590 and 7590 - Netgear GS316 / MS316 and GS308 / MS308 Screw size is parametrizeable, example is with M4 10mm screw Source at Github https://github.com/bobosch/RouterRack
Ford Capri RS3100 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
3D print a frame for Adafruit LED Glasses IS31FL3741. Use any Adafruit Feather compatible board to control the LED Glasses. The Feather is secured to the arm with M2.5 x 6mm screws and hex nuts. The two arms are secured to the frame with…
Rack mounting brackets for Netgear 16 ports PoE switch GS3166EPP, with a space for the Power Adapter. Use M3 threaded rods and nuts to keep everything together (although they might be unnecessary, since the brackets already click in place…
The Feather Sense nRF52840 features a built-in PDM MEMs microphone for audio input. Audio is sampled via the onboard PDM microphone. The sampled data is then visualized with color. YouTube Video: https://youtu.be/LPXLpRKf-MI Guide:…
STEP files included so you can make your own remix. 120x120 fan. 4x heat inserts Voron style. My temperature with a Noctua 120x120 fan: CPU Temperature 49C Board Temperature 1 40C PHY Temperature 67C
Modified fixture to directly handle a Bosch PS31 drill, also added 2 screws to secure the drill Print 2x knobs, and the fixture Needs 2x M5x45 hex bolts, 2 M5 washers and 2 M5 nuts
this elbow was created to help connect the 4 inch hose better, i made one for my saw , press fit on ellipse side great.
This is a basic case for the Espressif esp32-s31 Function-Coreboard. Screw holes are M2.5, perfect fit for SPAX Universalschraube 3x12mm T-STAR plus VG. Print tested with PETG without supports, works fine. Quite basic just with holes for…
Replacement wind cups for a B&G WS310 wind instrument. Accidentally broke one off and needed a replacement quicker than ordering a new one would get here. Needs supports for printing and will require some cleanup when they are removed.…
Created using the Reality Scan Android app and Onshape - it's not perfect but it fits and works essentially as well as the standard part. The mod is fully reversible and requires only a PH1 driver to move the existing screws over to the…
So I had this clock for about a year, but just bare PCB wasn't really suitable for display purposes. So it seemed like a problem my printer could solve! This item prints in two pieces, the bottom contains the actual clock, and the top…
It consists of two parts: the adapter for the switch and a 20 cm extension connected by an M5 screw and thread to complement the 19" of the rack.
This is a fan bracket for a Supermicro AOC-S3108L-H8iR RAID card. Model was made from scratch, inspired by the design of https://www.thingiverse.com/thing:3646996. Designed around a Noctua NF-A4x10 PWM fan. I printed on a Prusa Mk3s+ with…
Just a simple “perfect fit” remote control holder for RCS311. inner height: 18mm width-middle: 43mm width-bottom: ~38mm
hobbico dromida futaba s3114 servo mount to fit a futaba s3114 servo in the dromida 1:18 4wd sc truck Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .2mm Infill: any Filament: any any any…
Custom holder for Bacho 59/S31 Bit Set. Can be mounted directly on the wall, or to a pegboard with 12mm grid. How I Designed This I design my tool holders for fast printing and with tight tolerances. A well calibrated printer is a given.…
2S31 Vena is a scale 3d printed model of a real military armored vehicle, ideal for tank, self-propelled gun, and armored vehicle dioramas and display collections. Use it for wargaming scenery, tabletop displays, museum-style model…
Gridfinity organiser to fit 3x AD-S31BT batteries for Sharp MiniDisc players
This model is used for replace a canon printer ink cartridge clip, the clip is a failure we can replace with this model the clip contain a spring to load the clip, we cannot get the clip in market when the clip broken , that time we can…
Printing Parameters : - print at 0.2mm layer height to make some overhangs work properly - don't use supports Assembly : - insert 4 m3x4 heat inserts in the holes surrounding the fan inlet of the top half - insert 4 m3x4 heat inserts in…
Sirène aérienne pour ventilateur Ardes AR5S31 - V2 Cette sirène mécanique remplace l’hélice du ventilateur Ardes AR5S31. Elle utilise deux rangées de 16 et 24 ouvertures. La cage reste fixe ; le rotor, entraîné par l’axe et sa goupille,…
Gridfinity bins for brick LiPo type batteries used in Kyocera Yashica Konica cameras as well as Sharp minidisc players. Two options: for 3 or 4 batteries. Have magnet holes on bottom.
I lost one of the tpu bases for my Magene s314 speed/cadence sensors so modelled this to replace it. Print at 100% infill, it only uses 1.2g of filament.
This kit includes a guide for drilling the lid hole into the main housing, use heat inserts to secure the board and lid to the housing Print settings: Infill: 35% Perimeters: 2 Material: PETG, ABS, ASA
Garmin varia mount, for canyon speedmax S31 seatpost, or any other seatpost with standart bottle mount mounting (64mm spacing). Mount fixes to the seatpost with 2 M5 DIN912 bolts 12mm lenght. Then you screw original varia mount insert,…
I liked the idea of the original model this is a remix of, but I struggled with fitment, rigidity and fan mounting setup. I had a better success with this updated model. WARNING : low profile heatsink is required. There are many options…
Simple ears to mount Mikrotik CRS310-8G+2S+IN in 10" rack.
i dont know what to say here but here is cappy0 and rochas as figures
like i said its a tree. comes with a smaller version and a big version
This mounting bracket (Buegel_CSS318.3mf) mounts a MikroTik CSS318 switch to an Ikea Skadis board. Eight M3x8 countersunk screws are needed for mounting the switch to the bracket. There is a second variant (Buegel_CSS318_Sodola.3mf), that…
This a case for the Espressif ESP32-S31 Functional Coreboard-1 for the open source ESP32TimeServer project on Github: https://github.com/roblatour/ESP32TimeServer Needed nuts and bolts: 4 x M2.5 - 20 mm (to secure the ESP32-S31 Functional…
ESP32-S31-Korvo-1 case with 4.3" LCD A case for the Espressif [ESP32-S31-Korvo-1 V1.1]( https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s31/esp32-s31-korvo-1/user_guide.html ) with its 4.3" LCD subboard mounted. Outer size…
Holder to mount NetGear GS316 Switch in 19" rack. Print 2, one for each side. For ekstra security, add a large zip tie to hold the ears to the switch while mounting it to the rack, once it's mounted it should hold it self. print with the…
The switch itself is 1U-sized and even comes with hardware mounts for a 19" rack installation, but the 10" rack mount accessory is extra. With this mount you can utilise one of the included rack mount ear brackets to mount the switch to a…
Custom cover to improve Microtik CRS310 cooling and meaningfully reducing noise by replacing the original 40mm DC fan with a pc case 140mm one.