240 models
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET
No brim or supports required. The Space Saving Hanger is a simple wardrobe organizer designed to help you fit more clothes into limited closet space. The hook hangs directly from your existing closet rail and provides 5 separate slots for…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
I need to move my Elegoo Neptune 3 Pro printer to a smaller table, which is around 40 cm in depth. However, the original filament spool holder stuck out too much at the rear that I have to pull the table away from the wall to accomodate…
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
I printed this at .15 layer height but .20 should work, add supports to the wings and the main body may require supports for coin slot. For a two colour body add colour change at 110mm in your slicer. Low Poly Version can be found here. 🤗…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for one variant
Tired of shoes cluttering your entryway or taking up precious floor space in your closet? Meet the ultimate 3D-printable shoe hanger : the simplest, most effective way to organize your footwear and speed up the drying process. Whether…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
For my filament box I wanted to have a spool roller with following features: Shall save space in the filament box. Enable easy replacement of filament spool. Shall work for 1kg spools with ⌀200mm. Shall be robust and avoid jumping out of…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for PETGSource material: PET
This float allows you to submerge the cans and then be able to take them out very fresh. The flexible tabs allow you to hold the cans well. Remember to tie the float well with a rope! For standard 330ml can measurements. 350ml or 500ml.…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET
Imagine a million years lost in space and time, after crashing through a vortex of loose change it has transformed my original creation into a stealth low poly rocket bank. Be warned it's a bit battle scarred and dented but still holds…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
The “ Space Saving - Outlet or Light Switch Mounted -Tooth Brush Holder ” attaches to the right or left of a decorated or plain electric socket or light switch cover. The decorations on the covers are simple Greek inspired floral…
Print approx. €2.10–€2.56 excl. taxPreliminary estimate for one variant
I was inspired by this model by CuriousMint, but it didn't perfectly meet my needs so I decided to start my own model from scratch. This model consists of two parts that fit together (I also glued them). I printed both pieces vertically.…
Print approx. €20.18–€24.66 excl. taxPreliminary estimate for one variant
I can't believe the years I've snowboarded without taking better care of my knees when riding the gondola! I ski in Eldora, Colorado and there, the lifts take a long time to get to the top of the slopes - so, my right knee (cuz I'm…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Very material-saving battery holder for CR2032 batteries in various sizes for storing 10, 20, 30 or 40 batteries. The design is deliberately simple and material-saving and requires only 16g PLA in the 40-piece version or 4.4g in the…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Very material-saving battery holder for AAA batteries in various sizes for storing 10, 20, 30 or 40 batteries. The honeycomb design is deliberately simple and material-saving and requires only 14g PLA in the 40-piece version or 4g in the…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Very material-saving battery holder for AA batteries in various sizes for storing 10, 20, 30 or 40 batteries. The honeycomb design is deliberately simple and material-saving and requires only 19.5g PLA in the 40-piece version or 5.5g in…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Hook for IKEA PAX Shelf Holes – Space-Saving Closet Organizer I'm uploading a part of a model designed to fit into the standard holes found in IKEA PAX wardrobes – the ones where you normally insert shelf pins to support your shelves.…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Make your own This is a remote controller holder with holes to save material. The advantage of 3D printing is that you can make something exclusive to yourself. So, you can remix this model and make it in the perfect size for your remote…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of a wonderful model. I made a vertical coin slot so I did not need any supports to print this beautiful model. I used PLA and a 0.4 nozzle with 0.2 layer hight. I also added text to the print to make it personal.
Print approx. €8.21–€10.04 excl. taxPreliminary estimate for one variant
A simple slightly NOT to scale design of the Starship that launched, it was Inspirational, and something to teach my kid to do.. Aim for the stars as it certainly is achievable.
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
This is a hammer holder for pegboard. It is designed to mount a hammer vertically in order to reduce the area occupied on the pegboard. Made for the following hammer.…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
Intro Changelog: Aug 29, 2026 - Added a hole guide part, a small optional part to glue onto the open adjustment coupler to aid in filament insertion March 1, 2026 - Added several Core One Buffer parts, created new universal spool hub…
Print approx. €1.57–€1.91 excl. taxPreliminary estimate for PETGSource material: PET
Wall Mount for Netgear Switch – Secure and Space-Saving Solution Organize your network setup with this custom-designed wall mount for Netgear switches. Built for stability and ease of use, this mount is the perfect solution to securely…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Keep your space clean, organized, and efficient with this adhesive trash bag holder set. Designed for convenience, these wall-mounted holders let you store and dispense trash bags effortlessly—no tools or drilling required.
Battery holder (space saving Remix). Please tell me if it has/you have any problems
I completely redesigned this piggy box in Tinkercad from scratch including a well fitting closure. Intention of this new design: 3d printable without any support (see photo showing internal support design for overhangs during the print of…
Liked the drawer unit but thought the hexagon pattern adds some flavour to it and saves a tonne of filament.(50% off shell,25% off drawers). I added a slight angle to feet so it stops harassing me for supports. I printed it flat on its…
This is a quick remix of the popular dishwasher tablet dispenser designed with speedholes to save material during printing. I have also changed the attachment system to only require one screw near the top (keyholed).
Fast printing because of optimized wall thickness - 2 times extrusion width. Stiff because of embossing's
The SnapRack system is designed to easily reconfigure your sample handling rack on the fly to suit the needs of your current task. It fits 1.5, 2.0, 5.0, 15, and 50 ml tubes/falcons. Whether you want to pipet a master mix from a 15 ml…
Print on the back side. The bridged length is about 44m which works fine on most printers without support. 2024-02-06: Removed the fillets on the back for better bed adhesion 2024-02-08: Added more models 2024-03-15: Added split models…
I found many bin attachments online, some that curve around the machine and others that are free standing. What I wanted was a permanently mounted stand with a bin that sits securely in place, stays close to the machine to save space and…
These very simple holders use far less space (1 Multiboard ‘unit’ / 2.5cm wide) than other plier holders that mount the pliers flat on the wall. They will work for most normal sized pliers. 2 versions attached: 15.5mm - ‘normal’ pliers…
Space-saving hangers. The published models save from 2 cm to 18 cm over a normal sling bar of 200 mm length (also published). And look the commemt below stl The total length of the hanger is given by the diagonal of the bed of 300x300,…
This is my take on a tool to hold nails so you don't hit your fingers. It has a protrusion to help you hold the device securely with your fingers. Print it with PETG and enough infill (30%) to give it extra strength.
A practical and modular set of square money boxes, designed for 3D printing and perfect for a variety of purposes like a piggy bank, donation box, or coffee fund container. These boxes are available in three different sizes and feature a…
I've been using the original model for about eight months and like them. Today, my wife asked me if I could modify the holes to make it easier to insert hangers. After a bit of discussion and playing, this is the model I came up with.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Top and bottom fit very tight, you may need a knife or similar to pry open. I printed it with 0.3mm layer height and a 2 perimeters thick wall, so it's still a bit flexible. h:122mm ø:80mm hole: 32mmx6.5mm
This is a collection of 5x1 gridfinity base sizes with 9 seperate spaces for M2/M3 screws, nuts, washers and locks. Each unit fits at least 40 pieces - but can go up to 150 (depending on categroy). The STL models are included to either do…
Labyrinth Puzzle Box as Piggy Bank. Big Thanks @ZacharyLance_863 for the base model. Printed with PLA 0,2mm Layer height.
Reducer M22 M28 for saving attachment to bath faucet. Redukce M22 M28 pro spořící nástavec k vanové baterii.
Supports needed for: Water tank Upper part of the channel (between water tank and toilet vase). Note: I had good results with Prusaslicer → Paint-on Supports → Automatic Paiting. I printed with PLA, 0.2mm, 15% infill.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This pink Kitty saving pot model was made by Revopoint POP.If you want to get more models like this, please try to use 3D scanner POP: https://bit.ly/3xb37c3 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
An easy way to store, and save your money! Ones it's full you can smash it with a hammer! Print it without supports or else they will be stuck inside and you won't be able to get them out. It is a pretty intense bridge so it might not…
I took the model created by tjsoco, which was already looking more reliable than other people's designs, and upgraded it further to use 30% less plastic and be more reliable. 1: I made the hole tapered to have a tighter fit, this ended up…
Gridfinity 3.5" HDD Storage System A practical and compact HDD storage solution designed to keep 3.5" hard drives organized safely inside standard IKEA drawers — Gridfinity-compatible and optimized for efficient cold storage. Overview I…
Description Maximize your footprint and clean up your setup with this top-mount bracket for the Creality K2 SE + CFS system . This bracket lets your CFS sit securely on top of the printer , freeing up valuable bench space while keeping…
CAD file . There are 3 different sizes, all have a spacing between notches of 1cm. After printing it use a bit of rotation force on the hinges and they should break free.
Space saving measurement tool holder [French Cleat] Designed to fit a plywood French cleat size: ¾" ~ 18mm Fusion360 model included
Giving money as a gift is often considered rude and uncreative. But sometimes it's the best gift - especially if you want to contribute to an expensive trip the beloved recipient is planning. To avoid the “uncreative” tag, you need to…
This is a collection of 5x1 gridfinity base sizes with 8 seperate spaces for M4/M5 screws, nuts, washers and locks. Each unit fits at least 20 pieces - but can go up to 150 (depending on categroy). The STL models are included to either do…
Needed a thermal roll holder smaller than the width of my desk. This sits on top and lets the roll feed from the top. Just print 2 of the feet, 2 of the pegs, and one of anything else. Just need to glue the pieces together. Fits the Comer…
Bring a touch of fun and security to your savings with this unique 3D-printable Beer Mug Cash Box! Perfect for beer enthusiasts, this whimsical design adds a playful twist to your traditional cash box. Whether you're saving up for your…
Become a barrel maker! Print and assemble this cute wine barrel. The barrel serves as a savings box for coins. It is a bit like a piggy bank. If you eventually would like to access the coins, you most likely will have to cut the 3 rings…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
When I'm working making coffee with my portafilter machine takes a long time. Especially weighing precisely 18-20g of coffee beans on my scale and dosing them to my grinder is very messy and not practical. When I want to share a coffee…
Layer height: 0.28 Part 1 takes 1.5 hours to print and uses 19.67m of filament (original: 2.25 hours and 28.06m) Part 2 takes 1.5 hours to print and uses 19.94m of filament (original: 2.25 hours and 31.18m)
Last change : 2025/11/08 I've designed these objects in order to save time and material during pure calibration phases. The larger the preciser (logically). Although the rounded corners should not interfer with measurments, a bad jerk may…
A practical wall‑mounted laptop holder designed to save space and keep your desk organized. The model consists of two brackets — print one for the left side and one for the right side. Once printed, simply screw the set into the wall to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Deutsch: Ich habe für unseren OV Schlüsselanhänger in der Form einer Rettungspuppe designet. Ich habe ein Modell ohne Branding und eines mit "DLRG" als Aufschrift hochgeladen. Für meinen OV habe ich zusätzlichden OV-Namen verwendet. Die…
I noticed that my zippo lighter needed refilled more often than I liked, so I created this baseplate after seeing similar products online. It has fingernail notches on both sides so you do not need tools to remove it, unless the screw…
https://www.printables.com/model/1893005-filament-clips-for-175-mm-filament-6-sizes-xs-xxl 🐝 Beehive Savings Box – Mini Hive Money Box A cute and functional miniature beehive savings box, remixed from Sascha's Mini Zarge . Turn a small…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Saving Private Ryan - T4 Medic Irwin Wade - 1998
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A minimal cascading hanger hook designed to maximize closet space by vertically stacking multiple clothes hangers. The hook attaches directly to a standard clothes hanger and allows another hanger to hang below it, creating a clean…
Small support for the weed eater. Does not take long to print and requires no supports. I have included the step file in case you need to modify for the screw size or else. I printed it in PETG since it will be in my garage during summer…
Features Space-Saving: Vertical stacking keeps your closet clutter-free. Easy Access: Open slots for quick selection and storage. Sturdy Design: Optimized thickness to support the weight of heavy leather buckles. Modern Aesthetic: Looks…
The CW1 tank is quite big and I never print such hight stuff. I design this arm in order to lower the build plate and save 1L IPA. Printed in PETG, tested for 6 months, no issue. Use the arrow on nut top in order to have a good lock of…
In order to save space on my tool wall and to prevent these precise measurement tools for ending below a pile of other stuff, I've designed this minimal hook. On the side you can hang your combination square, an add-on that was inspired…
The Life Saving Bracelets are an innovative emergency response enhancement devices, produced to help first response workers to identify patients Names, Blood group, Emergency contact number and other underlying medical conditions. Make3D…
Update, March 18, 2024: Finally got around to re-printing the bracket, using the v1.1 file. Added new pics of the new version. Update, January 24, 2024: I created v1.1 of the Tool Holder and Display Bracket, moving the tool holder…
This is version 2: Original model here . I really liked scrat82's “ j1772 plug holder with cord management for EV cars and chevy Volt ”. Specifically I liked the way the handle was sideways, rather than perpendicular to the wall. I was…
On top of the box you can attach a laminated savings tracker sheet , where you cross off the amounts you put inside. This simple system adds a bit of gamification and helps you visually track your progress toward your savings goal. Design…
This accessory is designed to optimize clothing storage in a closet or on a rack. It features two hooks at each end, allowing it to be hung either horizontally or vertically. Its structure includes several slots or holes to hold multiple…
Updated 19th Nov 2023: Increased tolerance of the thread for easiear fastening.
I needed a way to store a lot of shoes in a small space - this was the result. There are lots of shoe rack/storage solutions on here already, and this one is is probably a bit specific for our project, but I thought I'd share it on here…
Nicely rounded piggy bank for saving money forever. No, it does not have a plug to get anything out. Yes, it's designed that way on purpose. If you can't get the money out, then it's saved forever. ;)
Compared to classic wall attachments, this allows the motor housing to be stored parallel to the wall. In this way the total thickness does not exceed 13.5cm (which is more or less the diameter of the motor). The attachment incorporates a…
This savings bank mimics the iconic British, 1879s A-type letter box. It is a fairly easy and quick print and ideal as a gift box for money. The slot is- of course- large enough to even accept these huge two pound coins. If you like these…
Space saving scarf organizer / scarf holder for the wardrobe. Of course you can also hang anything else on it besides scarves. Both versions are stable enough but also thin enough so that they remain flexible enough even with PLA and…
The pro knives cost a fortune for a simple plastic-handled, guarded-blade knife. $57 USD! Mine is a little fatter, could use a diet, it's a work in progress and I might refine it. It uses standard X-Acto #11 sized blades. If you have the…
Cutlery Organizer. This space-saving solution features three seamlessly sliding compartments and a convenient lid, allowing you to store your cutlery and utensils neatly in any regular kitchen drawer or cabinet. The smart design not only…
English I. Introduction The Anti-Vibration Feet for the Bambu Lab P/X Series provide an innovative solution for reducing vibrations and noise in 3D printers. These feet are equipped with ball-bearing mechanisms, allowing the accommodation…
Paint Brush holder for different brush diameters, designed in a material-saving way. The parts fit together perfectly, but I would recommend to glue the outer parts together. Can be resized to hold thicker brushes.
Energy prices are skyrocketing, winter is coming, and unfortunately I'm heating my water with electricity, so I've designed this shim to reduce my energy bill. I'm using the 3.5 mm version and was able to reduce my water flow from 12…
2:1 aspect ratio (50x25x10, 100x50x10, ...) There are too many trays in too many dimensions. Trays have modular dimensions Print in vase mode For rigidity print with 0.8mm nozzle These trays are shallow so you can use it in tight spaces.…
I've been sealing the house from air leaks as trying to save money on heating. These are replicas of the foam ones I got as I ran out in the first room. To install an outlet gasket you simply unscrew the switch plate, place the gasket…
I wanted a saving throw counter that removed the possibility of me losing the little pegs. The slider prints in place, and then can be broken off by pushing it sideways. some post processing will be needed to smooth out the supports.…
If a cat washes itself with its left paw, it is said to bring prosperity and increase in profits. What's better for a money box than a cat like this? Please be gentle with me as this model was my first Blender project. Initially, I…
I’m excited to share my custom design for a HOLY Energy Drink Tube Stand, perfect for efficient and organized storage in your kitchen. Inspired by the ROLS733 design, this stand not only looks great but is functional too. I wanted a…
check out the other versions The v5 version is similar to the v2 version but with a 60 degree angle so that the legs require less space (width). I have created 2 models with 0.1 and 0.2 tolerance. If you are not sure, print the tolerance…
This minimalist poop bin holder is specially designed for the Bambulab A1 3D printer, allowing you to place the printer sideways against a wall. The holder’s width is maximized for printing with the Bambulab A1 itself, and the depth…
The drawers of my toolbox (Qbrick System PRO Drawer) are not particularly high, and I cannot organize my pliers upright. Therefore, I designed a angled solution that allows the pliers to be organized in a space-saving and clear manner.…
I was running out of filament so I decided to put in a hex pattern. I also scaled the z-height afterwards in my slicer to around ~90% to save a bit more filament. I actually prefer this versus the original as it lets me more easily see…
This accessory is designed to optimize clothing storage in a closet or on a rack. It features two hooks at each end, allowing it to be hung either horizontally or vertically. Its structure includes several slots or holes to hold multiple…
Children at the age of 2-3 years tend to have their head at the same height as sharp corners of tabletops. This clamp provides a simple and non-destructive way of temporarily rounding off these corners while the children are in the…
This is a mixture of various Gridfinity models to host things in a space saving design: Long Screws (20-40, 30-50 for M3, M4, M5) Ball bearings Knurled heat insets (M3, M4, M5) Circuit board spacer screws (M2.5, M3, M4) T-Nuts The labels…
![[French Cleat] Space saving measurement tool holder](https://media.printables.com/media/prints/561008/images/4496653_1490f681-5e7b-4e91-b7f7-c73e9ad50968/capture.png)
