Search results: sds

Sort order

191 models

P
PrintablesDoMakePrint

SanDisk Extreme Portable SSD (SDSSDE61) Compact Case

Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…

Downloads
2,612
Likes
492
Rating
4.85
P
Printablesbaldsealion

Steam Deck + Dock Carrying Case Insert US Plug (two MicroSDs Slot)

Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…

Downloads
1,186
Likes
131
Rating
4.67
P
PrintablesJFKonstruiert

OLD (and G4) L-boxx SDS Plus drill bit holder

I adjusted Jevermeister's drill bit holder for mounting pattern in older style L-Boxx lids. It does fit the new G4 version as well, but not as universal as the original design. Fits 5 SDS Plus dill bits per holder. 2 holders can be…

Downloads
186
Likes
36
Rating
5
P
PrintablesEdison82

Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution

Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution Keep your external hard drives and SSDs organized and protected with this custom-designed storage organizer. Built to securely hold a variety of drive…

Downloads
173
Likes
31
Rating
4
P
Printablesdaroz

Motor Controller Mount for SDS MK4 Swerve Drive (FRC)

Primarily for use in FIRST® Robotics Competition robots that use the Swerve Drive Specialities MK4 Swerve Module , this is an integrated motor controller and CAN bus connecter mount. Designed for FRC team 5881, the Tech Valley High School…

Downloads
119
Likes
11
Rating
0
P
Printablesmweisshaupt

Customizable SDS Drillbit Case

This drill bit case is inspired by the hexagonal drill bit set from Hilti. I liked the design but already had a few drill bits so I didn't want to buy a whole new set for the case. So I made a similar design :) This case is quite simple,…

Downloads
90
Likes
22
Rating
0
P
PrintablesJohanS

Transportation Tube For SDS Drillbits

A very basic transportation tube for sds drills, so the lube stays on the drill and do not touch everything. It must be printed in “Spriral Vase”-mode, and the dimensions are adopted for my 0,4mm nozzle. However if you need some other…

Downloads
23
Likes
2
Rating
0
P
Printablesad5ou

120mm APFSDS full size replica (Tank Sabot round)

UPDATE May25-2023: Added additional files for printing main canister portion on smaller printers. Split canister sections also have 3mm holes to help with alignment during assembly. This is a full sized printable model of an M829A1. The…

Downloads
2,070
Likes
285
Rating
5
P
PrintablesMZ72

APFSDS Nerf dart

UPDATE: Redesigned the shells. It takes much less time to print and has less weight. not print in place, seperate them before printing DO NOT SHOOT AT PEOPLE there's a 2mm steel tip version, U can put a diameter 2mm nail in it It can…

Downloads
980
Likes
93
Rating
4.67
P
PrintablesWilly Carrot

Bosch Professional L-Boxx SDS Drill Bit Holder Magnetic

Different brands of SDS drill bits can have some slight variations in diameter so I remixed Jevermeister's model to accomodate 6x3 mm magnets. I mounted the holders in the L-Boxx using M3 heat inserts. In my L-Boxx the holes don't all…

Downloads
946
Likes
188
Rating
4.73
P
PrintablesJevermeister

Bosch L-Boxx SDS Plus drill bit holder

This allows you to mount SDS Plus drill bits on the lid of your L-Boxx. Tested on a Bosch L-Boxx 136 G4 but it should also fit the older ones. Depending on how well your printer is able to print edges, you may have to force in a drill bit…

Downloads
817
Likes
96
Rating
5
P
Printableswunschpunsch

Modular Raspberry PI NAS Case for 2.5 inch SSDs

Description This design was inspired by Szmalus' excellent design: https://www.thingiverse.com/thing:3850735 However, it didnt feature a fan mount and the SSDs were needed as a structural element of the case. Since I often need to swap…

Downloads
768
Likes
157
Rating
5

120×570mm NATO Sabot Round (APFSDS)

Wiki Link: https://en.wikipedia.org/wiki/120%C3%97570mm_NATO#Armour-Piercing_Fin-Stabilized_Discarding_Sabot_(APFSDS) Add a filament change about there for the 2-color look.

Downloads
512
Likes
176
Rating
4.5
P
Printableskkb

BioRad compatible SDS-PAGE combs

SDS-PAGE combs, ranging from 3 to 16 wells, are designed for use with Bio-Rad electrophoresis systems. Each comb is tailored to support different sample volumes and separation requirements. Compatible with systems listed on Bio-Rad's…

Downloads
484
Likes
62
Rating
5
P
Printablessas

SDS-Plus Drills Case

I used PLA for printing. Layer height 0.3mm, 2 perimeters and 1.5mm shell thickness. Infill 5% Gyroid. My PLA prints overhangs poorly, so I speed down them to 20mm/s

Downloads
453
Likes
52
Rating
4.71
P
PrintablesJakeOfALL

SDS Plus Bit Holders for Milwaukee Slim Packout

I used the openscad from benjamenjohnson to create this. print them as they are, you dont need to turn them. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Inland PETG RED…

Downloads
451
Likes
103
Rating
0
P
PrintablesBeusekomse Baan

4-assige kuilwagen DB Uaiks721 / NS Sds 90200 - Spoor 1 (1:32)

The Nederlandse Spoorwegen commissioned one 4 axle depressed well car in 1962, type Sds #90200. This one was very similar to the Uaiks721 deployed by the Deutsche Bundesbahn.…

Downloads
382
Likes
35
Rating
0
P

Nerf APFSDS

Half-dart length APFSDS for Nerf blasters. It has two sabot pieces that form a loose seal with the barrel and then split off after exiting. The dart sits inside and takes a 2mm pin in the front to keep it stable. This of for springers…

Downloads
323
Likes
42
Rating
5
P
Printablesn.leinad

SDS Impact Drill Holder x12

Bought a kit with 12 SDS drills for my impact driver and I wanted to store them neatly in the same case as the driver. Therefore, I made a simple and compact holder that is easy to print, even without using supports. The holder uses a 7…

Downloads
323
Likes
37
Rating
5
P
PrintablesMAHWE

6-fach-SDS-Plus Bohrerhalterung für L-Boxx drillholder

SDS-Plus Bohrerhalterung für L-Boxx Kisten z.B. Bosch. Halter so drucken, das die SDS Aufnahmen nach oben zeigen. Als Material PETG, ASA, ABS, TPU Wandstärke mindestens 5* 0,2 Struktur für mehr Halt, da die Langen bis zu 400mm SDS-Bohrer…

Downloads
319
Likes
45
Rating
5
P
PrintablesSubBass100

DEWALT SDS Rotary Hammer Drill 20V MAX Wall Mount

Sturdy wall mount for the Dewalt DCH273B SDS Rotary Hammer Drill. Built in spacer. Use the spacer to level and install 2 screws. Easy to print. Also is said to work with Makita Hammer Drill DHR171

Downloads
301
Likes
42
Rating
5
P
PrintablesFRC Team 4272

SDS MK4i Spark Max Mount

This is a motor controller mount designed by FRC 4272 to cleanly wire the Mk4i swerve module from SDS . The design requires the SPARK MAX Mounting Bracket . It also requires the following hardware: 5 - 10-32x.5" bolts, 1 - 10-32X1.75 bolt…

Downloads
289
Likes
12
Rating
0
P
PrintablesJPS.AMC

Dewalt belt hooked drill/impact driver + SDS mounts

All credit should be directed to BurningTreeCorpse for his time in designing these first, I only tweaked for my own uses. The green mount is BTC's original design which works for the ½" impact driver (can't remember model off the top of…

Downloads
287
Likes
43
Rating
5
P
PrintablesPrintLab

SanDisk Extreme PRO Portable Case (SDSSDE81)

Please print with 6 wall loops, don't be shy with plastic, this is a case, it needs to be strong. Print it like on the last picture, this is the best way. Supports are very easy to remove, don't be afraid using them. I didn't found the…

Downloads
277
Likes
64
Rating
5
P
PrintablesCaleb.V

APFSDS Tank Shell

You can print in multiple colours to be the most realistic. Supports are also useful for the top curve.

Downloads
255
Likes
25
Rating
5
P
Printablessuyo6774

68mm APFSDS Round (Functional)

Also on Makerworld!: https://makerworld.com/en/models/2347089-68mm-apfsds-round-functional UPDATE: Added a short petal variant, should save some material and added a 250mm version for 256^3 size printers, should've done that way sooner,…

Downloads
255
Likes
18
Rating
0
P
Printableswojked

Wireless Dust Sensor SDS011 and DHT22(AM2302) with Wemos OLED enclosure

Republished from my thingiverse: https://www.thingiverse.com/thing:3342804 Links to the parts contain Banggood's affilate metadata. Intro I needed a PM2.5/PM10 sensor during this winter season. I wanted to monitor more than one room and…

Downloads
253
Likes
74
Rating
5
P
PrintablesEMN

SanDisk Extreme Portable SSD (SDSSDE60) Compact Case

Remixed to fit the older SDSSDE60 version

Downloads
253
Likes
21
Rating
5
P
Printableskstuken

Gridfinity boxes for wood / metal/ SDS+ drill bits

A couple of gridfinity boxes I designed to hold 1-10mm wood and metal drill bits, as well six SDS+ bits. I store these on a tray on my honeycomb storage wall.

Downloads
251
Likes
42
Rating
4.67
P
PrintablesMatt Richardson

LG Refrigerator door in door latch stop (Model LRSDS2706S)

LG Refrigerator door in door latch stop (Model LRSDS2706S). Since the OEM screw is very hard to access, this model is designed for you to scrape/cut the broken one flat on the bottom (pictured) then install this on top, gluing it on the…

Downloads
244
Likes
2
Rating
0
P
PrintablesMAHWE

4-fach-SDS-Plus Bohrerhalterung für L-Boxx drill chuck

4-fach-SDS-Plus Bohrerhalterung für L-Boxx SDS-Plus Bohrerhalterung für L-Boxx Kisten z.B. Bosch. Halter so drucken, das die SDS Aufnahmen nach oben zeigen. Als Material PETG, ASA, ABS, TPU Wandstärke mindestens 5* 0,2 Struktur für mehr…

Downloads
238
Likes
51
Rating
5
P
PrintablesUseless Ideas
18+

The source marked this model as adult content.

Downloads
217
Likes
49
Rating
5
P
PrintablesRadu20

SDS Holder

This is a simple SDS drill bit holder. I had some used SDS drills laying around and decided make a support to keep them together. Print Settings Printer Brand: Anet Printer: A4 Rafts: No Supports: No Resolution: 0.2 Infill: 25 Filament:…

Downloads
216
Likes
19
Rating
4
P
Printables3D Rejsen
18+

The source marked this model as adult content.

Downloads
204
Likes
95
Rating
4.6
P
Printablesgreenfox

SanDisk Extreme Portable SSD (SDSSDE61-1T00) Compact Case - Redesign with port and better fit

This is a complete redesign of this great concept with a added exposed port for the cable and a slight fit change.

Downloads
204
Likes
27
Rating
5
P
Printablesmotarr

2x 2.5 inch SSDs in one 3.5 HDD tray

Caddy for 2 SSDs in one HDD tray with honeycomb pattern for better cooling Added V2 with more features Connector cut out Small stops for SSDs Added FAST version (Use only if temps are not a problem) Use for faster printing and less…

Downloads
176
Likes
18
Rating
5
P
Printablesk1-801

SDS Plus Bit Holder (x10) for perforator / impact drill / rotary hammer - Print-in-place

A simple holder for 10 SDS or SDS Plus bits for a rotary hammer (impact drill/perforator) Features latches and guides so the bits go in the right way and stay in place No additional components required, no assembly, no supports. Prints on…

Downloads
165
Likes
22
Rating
3.67
P
Printablesshicks101

SDS drill holder for Makita MakPac 4 case

SDS drill bit holder that fits into a Makita MakPac4 case in a empty battery slot. Print with a TPU filament, 10% infill and 2 shells for the wall. Category: Tool Holders & Boxes

Downloads
157
Likes
30
Rating
0
P
PrintablesAdventureDuck3d

.177 and .22 air rifle pellets APFSDS. Untested, try at your own risk. If you mess up that your own fault

The thing is pretty basic and my printer says it should take 5 to 6 minutes. Also this is untested, it could explode or damage property. TRY AT YOUR OWN RISK. I will try it in my airguns, and update it with a partially tested or unsafe…

Downloads
156
Likes
15
Rating
5
P
PrintablesDavid R

SasnDisk Extreme Portable SSD (SDSSDE61) Case - With Port Exposed

Modified the original by flipping the top half so the port can now be open without taking the SSD from the case.

Downloads
155
Likes
19
Rating
3

Clamshell shield and Spark MAX holder for SDS MK4 swerve module

In the 2022 season, Triple Helix mounted REV SPARK MAX motor controllers and a CAN connector board to some 3D printed shields which attach to the side of the MK4 swerve module from Swerve Drive Specialties. This makes the module a…

Downloads
142
Likes
11
Rating
0
P
PrintablesEinbauer_Chris

SDS Plus Bohrer Halter / SDS Plus Drill Holder

Hier meine Idee von einem Halter für die Langen SDS Plus Bohrer von Parkside. Montiert werden diese mit je 2x Senkkopfschrauben. Länge Variiert je nach Montageuntergrund. Ich hoffe es Gefällt euch!

Downloads
139
Likes
21
Rating
5
P
PrintablesOmega-TI

SDS100 Stand

There is little for the Uniden SDS100 on this site, so I uploaded this stand/holder under the creative commons license with attribution going to Todd Meyer that goes by the online name TwIzTuD. Included below is a photo of my make.

Downloads
139
Likes
4
Rating
0

APFSDS Mod for 13mm Barrel (Nerf Barrel) V4

APFSDS meaning: Armor Piercing Fin Stabilized Discarding Sabot, or: A certain type of ammunition. Directions: Print the three sabots and the penetrator, and when finished put the three sabots around the penetrator and put fins down into…

Downloads
131
Likes
12
Rating
5
P
PrintablesFrosty

sabot/APFSDS

this is am APFSDS round with the dimensions of 40mmx230mm (i would make it taller to be more accurate to actual real APFDS rounds but 230mm to 240mm is my 3d printers max height), but the casing itself is 48mm in diameter. feel free to…

Downloads
128
Likes
4
Rating
0
P
Printablesaeberbach

Siglent SDS8xx VESA mount

Instead of printing this one, use the updated model: The original model remains below in case anyone needs to replace a part for a mount that is already made. Looking for a new 12-bit scope I saw the new Rigols and liked the idea of the…

Downloads
127
Likes
19
Rating
4.5
P
Printablesplasticbender

DeckBro v1-Fixing Steam Deck Storage with Standard HDDs and SSDs

The DeckBro is a Steam Deck accessory that makes it easy and portable for hard drives to be connected. It’s got two storage compartments: one for any hard drive of the 2.5-inch form factor or less, and one for a USB-C hub. They’re…

Downloads
118
Likes
16
Rating
3
P
PrintablesBolukan

SDS Plus drill box

Simple box to store SDS Plus drills with clamp robust enough for strong men but also easy enough for impatience men. OpenSCAD source file included to create the length you need and choose the number of drills that fit into the box I…

Downloads
110
Likes
22
Rating
5
P
PrintablesTeeCee

SDS-Drill Holder for Storage Wall

Remixed from https://www.thingiverse.com/thing:5321873

Downloads
109
Likes
30
Rating
0
P
PrintablesMatthew Wegmann

SDS100 Scanner Stand

Stand to hold a Uniden SDS100 Scanner upright, tilted back 15 degrees to aid in reading the display.

Downloads
108
Likes
8
Rating
5
P
PrintablesAarav Mehta

SDS MK4i Swerve Corner | FRC 4099 The Falcons

Provides support to each corner of the bumper.

Downloads
106
Likes
14
Rating
0
P
PrintablesMichal
Downloads
105
Likes
18
Rating
0
P
PrintablesPrecise D

Nerf Half Length Mag-fed sabot APFSDS

A Reloadable magfed-enabled version of the original by MZ72. PLEASE DO NOT FIRE AT ANYONE 1 shell 12.5mm 1 full print sabot (didn't test much, tell me how it goes) 1 alternate sabot fins (toothpick, or whatever else is that diameter)…

Downloads
101
Likes
25
Rating
0
P
PrintablesPe4rls

APFSDS Nerf dart v2

print the sabow in vase modewith 0.12 mm height and the projectile in 100 % infill att 101.5 scale 0.22mm height. and please be carefull, it is dangerous if miss used

Downloads
98
Likes
18
Rating
0
P
PrintablesOle_IPM

DM33 APFSDS

"Druckteile schwarz" ist so aufgebaut, dass man sie alle mit schwarzem Filament drucken kann und dann nur noch feststecken oder zusammenkleben muss. "Druckteile Silber" funktioniert genau so nur mit silbernem Filament.

Downloads
98
Likes
13
Rating
0
P
PrintablesMarlo3110

Rotating SD Holder (16 SD Spaces) - Lifts SDs

This is an SD-CardHolder TM with a small twist. WD-40 tutorial You might be wondering "Where do I apply WD-40?" (probably not but cmon) And to that question, I have the perfect answer! Place WD-40 where the red dots are. But don't overdo…

Downloads
98
Likes
7
Rating
0
P
Printablesvier2acht

Abus SDS80 Pepperspray Holster

ABS/ASA 100% Infill Print in standing up position

Downloads
96
Likes
10
Rating
0
P
PrintablesHclaw66

Uniden SDS200 desk stand

A remake to make the stand wider so it wouldn't slide to the side. It will print without supports. I used PLA and it takes about 4 hours to print.

Downloads
88
Likes
7
Rating
5
P
PrintablesSectionUT

Uniden SDS100 20mm Ball Mount

This is a simple drop in 20mm ball mount for the Uniden SDS100 Scanner. I needed something to use with the 20mm Bulletpoint Mounting Solutions system. This mount can be left in the vehicle while the device itself can be pulled in and out…

Downloads
87
Likes
10
Rating
0
P
Printablesnjmck

SDS-PAGE gel doc imager box for smartphones

A cheap and effective method for taking photos of Coomassie/silver-stained SDS-PAGE gels is to use a light box and a cardboard box with a hole cut out from the bottom. It's like a home-made gel doc just for Coomassie/silver-stained gels.…

Downloads
87
Likes
10
Rating
0
P
PrintablesToDamLazy

Uniden SDS200 Base Scanner Stand

This is a Uniden SDS200 Base Scanner Stand.. I printed mine in PETG 0.2mm layer, 3 walls, 15% infill.

Downloads
85
Likes
4
Rating
0
P
PrintablesMarián

Storage for SDS drills , Zásobník na SDS vrtáky

This is a magazine for SDS drills with attachment to the wall or to the trunk. Printed from PETG, 15% filling. Toto je zásobník na SDS vrtáky s uchytením na stenu, alebo do kufra. Tlačené z PETG, 15% výplň.

Downloads
85
Likes
13
Rating
0
P
PrintablesIsaac Howard

SDS011 Project Box and USB Cable Box

This is a project box for the SDS011 detector. Using the YABB_Box Libarary.

Downloads
79
Likes
5
Rating
0
P
PrintablesOle_IPM

DM53 APFSDS

"Druckteile schwarz DM53" ist so aufgebaut, dass man sie alle mit schwarzem Filament drucken kann und dann nur noch feststecken oder zusammenkleben muss. "Druckteile Silber DM53" funktioniert genau so, nur mit silbernem Filament.

Downloads
79
Likes
15
Rating
0
P
PrintablesDenbot

FRC SDS MK4 L3 5.83:1 17.36 FPS Swerve Drive Herringbone Gears

Requires use of the Spline XS 3D print adapter WCP-1021 from WCProducts.com Highly recommend printing with filaments that support mechanical resistance. PETG at a minimum, PA11 Nylon preferred

Downloads
78
Likes
11
Rating
0
P
PrintablesTomco

SDS drill holder for HSW

Simple holder for 11 SDS drills Supports needed for wall connector only ----- Post your makes and like. Thank you.

Downloads
78
Likes
18
Rating
5
P
Printables3DrehDruck

R18SDS Wall Mount

I printed with a 0.6 Nozzle and 0.3 Layerheight. Hope this will help one or two people ^^

Downloads
78
Likes
5
Rating
4
P
PrintablesYodog

Adapter for two 2.5" SSDs to 3.5" bay.

I made a quick remix from Bevcan clever thing to fit 2 SSDs into a 3.5 inches bay. With 20% infill, 3 walls (0.4 nozzle) and 10% of support density it spends just 30g of filament. Print Settings Printer Brand: Creality Printer: Ender 5…

Downloads
72
Likes
10
Rating
5
P
PrintablesEMN

SanDisk Extreme Portable SSD (SDSSDE60) Laptop Mount

Resized to work with SDSSDE60 version of the drive.

Downloads
72
Likes
4
Rating
0
P
PrintablesBeppeITA

SDS011 particulate - dust sensor PM2.5 and PM10 case

I purchased the PM10 & PM2.5 sensor sds011. As many have done I added the temperature and humidity sensor. everything managed by an Arduino esp32 and Matt, sending data to my DB influx and graphing everything with Grafana. Of course with…

Downloads
71
Likes
6
Rating
0
P
Printableshal

wall mounted sds bit holder

wall mounted sds bit holder

Downloads
68
Likes
11
Rating
0
P
PrintablesOmega-TI

BT-954 Battery Storage Case (For SDS100)

This model comes from a scanner enthusiast (like myself) that goes by the name jbix1958 online. It's to protect the contacts of the battery and to afford it a modicum of protection from potential crushing.

Downloads
68
Likes
8
Rating
0
P
PrintablesPe4rls

APFSDS Nerf dart

print with supports and 100 % infill. KEEP AWAY FROM KIDS! THE MODEL IS DANGEROUS IF MISSHANDLED OR MISSUSED. specifically the gyroskopic version as it is way sharper. the gyro version has fins that in theorie make it more stable. i…

Downloads
68
Likes
9
Rating
0
P
Printableskuchar

SDS011 and XIAO ESP32C3 enclosure

Enclosure for SDS011 air quality sensor connected to Seed Studio XIAO ESP32C3. Together they make very nice indoor air quality sensor. Requrired hardware: M3 heat inserts 3mm height for ESP32C3 holder Anything < 10mm for the rest. M3x5…

Downloads
68
Likes
7
Rating
0
P
PrintablesTDM465

SDS Mk4i Swerve module covers

Slightly thicker with more zip-tie locations and top screw access holes.

Downloads
68
Likes
4
Rating
0
P
PrintablesDampfy

Ikea Skadis SDS Plus Drill / Chisel Mount

sorry but you have to use supports, just juse organic supports. The Toleranzes are perfekt for printing on an XL whit .6 Nozzle.

Downloads
66
Likes
9
Rating
5
P
Printableskabuki

Gridfinity SDS Drill Holder

Gridfinity 2 x 1 sized SDS Drill Holder. I designed it in such a way you can insert the long and short version of the most common drill sizes. Based on ZachFreedmans gridfinity design system. The design was done in Fusion 360 using the…

Downloads
61
Likes
3
Rating
0
P
PrintablesrenoBT

Book Case for Raspberry Pi 5 (Rpi5), Active cooler, 2 SSDs, and full-HDMI

(This is the thicker Dual SSD version of my Book Case. I have also published a slimmer Single SSD version.) I wanted a good case for traveling and taking my Plex Media Server with me. My requirements for this case: All Ports on One Side 2…

Downloads
59
Likes
5
Rating
0
P
PrintablesTD3D

SDS Plus drill box

all parts printed in PLA with 0,15mm Layerhigh.

Downloads
59
Likes
5
Rating
4
P
PrintablesBrandon Kish

4x SSDs To One 120mm Fan Slot Adapter

This bracket allows you to mount 4x SSDs to a single 120mm fan slot. It is designed to use the standard 120mm fan screws to mount it. Useful for when you have more SATA ports than hard drive slots in your case. NOTE: There is an argument…

Downloads
53
Likes
10
Rating
5
P
PrintablesRumagelo

Siglent SDS800X HD 100mm VESA mount

Print 2 grippers, body with supports for the nut holes. 3 perimeters but infill can be light. Hardware: 10 M3 nuts and bolts 17-40 mm long. Longer than 25 mm will interfere with the power cord so only 9 can be installed. Also comes with a…

Downloads
52
Likes
4
Rating
0
P
Printablesdevilbane

sds100 stand scanner guys

the scanner guys sds100 stand

Downloads
52
Likes
3
Rating
0
P
PrintablesCubic

Tripodmount Siglent SDS800X SDS804

Wenn man am Auto,am Schaltschrank,an einer Anlage arbeitet und keinen Tisch oder ne Ablagefläche hat ,dann ist man damit gut bedient ! Mit dem richtigen Stativ kann man die Höhe und Neigung einstellen und jederzeit leicht drehen , Die…

Downloads
52
Likes
9
Rating
0
P
PrintablesNir Dobovizki

Box for SDS drills, screws and anchors

The box is based on Parametric Box v2 (single clasp)

Downloads
50
Likes
15
Rating
0
P
Printablesewr2san

SDS MK5n Billet Wheel 3D printed Quick Change Tread

A re-design of quick change TPU treads specifically for the SDS MK5n. These are a ground up re-design of the Quick Change Formlabs WCP treads : The MK5n version has geometry adjustments to make them last longer, and be easier/cleaner to…

Downloads
48
Likes
2
Rating
0
P
PrintablesJason Hodgins

FRC: Motor Controller Mount for MK4 SDS Swerve

This mount is intended to be attach to the MK4/MK3 (top motor mounted swerve from SDS) after the drive unit is fully assembled. This will provide locations for 2 zip ties for each motor controller, 2 zip tie locations for wire management,…

Downloads
48
Likes
4
Rating
0
P

Ikea Skadis Lettering Chisels S.76 / Drills SDS-Plus

Supported brands: Rexid Wezid Europ Shank shape: 10,2x36 mm (S.76)

Downloads
47
Likes
11
Rating
0
P
PrintablesNettigo

SPS30 adapter - SDS011 mount adapter

This adapter is meant for SPS30 particular matter sensor. It allow to use it with SDS011 mount holes. Of course - device has to support SPS30 since it has different protocol than SDS011. First version - it will require modifications.…

Downloads
46
Likes
3
Rating
0
P
PrintablesDeecee

Einhell SDS Drill Case Latch/Catch

Replaces a lost or broken catch on a sds drill storage box

Downloads
46
Likes
6
Rating
0
P
PrintablesBeehphy

SIGLENT SDS2104X Protective Cover for Oscilliscope

I wanted to protect my equipment from bumps in transit, or dust while not in use. I designed this to print in one pass on the bed of a Bambu Labs X1/P1, and that mean many others as well. Choose which side the device model labeling is on:…

Downloads
45
Likes
8
Rating
0
P
PrintablesPaŠe

Nova PM Sensor SDS011 Air Quality Sensor box

A box for SDS011 laser dust particles concentration sensor. To be mounted on ceiling (under the roof

Downloads
44
Likes
1
Rating
0
P
Printablescaburum

SDS MK4i swerve module cover

Mounts along the inside/long edge of the swerve module. Uses zip ties around the metal of the module to secure it in place, wires can be also be included to route them.

Downloads
44
Likes
3
Rating
0
P
PrintablesDenbot

FRC SDS MK4N L2+ 6:1 16.87 FPS Swerve Drive Herringbone Gears (UPDATED)

BUILD SEASON 3D Print replacement for SDS MK4n L2+ gears. 18T SplineXS Drive gear requires a WCP-1121 3D print adapter. 2024-01-08 UPDATE: Denbot MK4N L2+ 26T 52T 20DP Double Gear bearing clearance updated after finding the wrong value…

Downloads
42
Likes
7
Rating
0

Uniden SDS100 Mount for Lovesac Couch

I was struggling finding an appropriate spot near my couch for my portable scanner. I designed this up in fusion for the radio and other storage for a can. Could probably scale up 1% for a little more room as the fitment with the radio is…

Downloads
41
Likes
4
Rating
0
P
PrintablesTheoBr24

Siglent SDS1000X Series Stand

When you use the retractable feet to tilt the instrument, the oscilloscope tends to slip or the feet collapse. With this model, you have the same angle as with the retractable feet, while the entire instrument is stable. You can also…

Downloads
41
Likes
6
Rating
0
P
Printablesjattie

SDS Drill bit adatper

Adapting SDS drill bit for use in regular clamping drill

Downloads
40
Likes
7
Rating
5
P
Printablesian123411

SDS drill bit holder

SDS drill bit holder was made because i had all my sds drill bits just sitting in a tub so i made a holder and a hanger for them the holder was made with TPU with a 0.2 layer height and a 15% infill and 3 perimeters i also used gyroid…

Downloads
39
Likes
15
Rating
5
P
PrintablesVictor

Gridfinity bin for 2 Samsung T5 SSDs

Gridfinity bin for 2 Samsung T5 SSDs

Downloads
38
Likes
2
Rating
0
P
PrintablesK

SanDisk Extreme PRO Portable SSD (SDSSDE81) - Desk / Wall screw mount

There are two version available. I use the snug version as I don't take my drive often, but if you do, try the loose version first.

Downloads
38
Likes
3
Rating
0
P
PrintablesRPG Fan

BattleTech Drake SDS Station

Note: This model may contain floating regions that need to be fixed. Source: https://www.sarna.net/wiki/Drake_SDS_Control_Station

Downloads
36
Likes
3
Rating
0