Search results: seestar

Sort order

98 models

P
Printablesdrhollen

ZWO Seestar S50 light/dew shield - baffled

ZWO Seestar S50 light/dew shield - baffled. This light/dew shield is an interference fit and slides into place. Remember to remove it before shutting down the Seestar. This design has many baffles inside to help reduce light reflections.…

Downloads
1,493
Likes
65
Rating
5
P
PrintablesInsane_Man

Bahtinov Mask for Seestar S50

For manual focus on bright stars and objects, just align the crosshairs.

Downloads
1,106
Likes
54
Rating
5
P
Printablescatalin59

Fixed Equatorial Wedge for ZWO SeeStar S50

This is a 3D printed fixed equatorial wedge for the ZWO SeeStar S50 telescope. It is supposed to be mounted between the ZWO provided tripod and the telescope itself and lets you use it in equatorial mode, without the field rotation…

Downloads
934
Likes
66
Rating
5
P
PrintablesNorm Norris

Seestar S50 Dust Cover

The Seestar S50 does not ship with a dust cover, therefore the lens is always exposed, so I created this dust cover to slot into the lens aperture to protect it. I suggest printing with PETG in order to give it a little flex, the fit…

Downloads
683
Likes
42
Rating
5
P
PrintablesMike Steffek

Seestar S50 Power bank holder

This is a sturdy power bank holder that will rotate with your scope so you don't have to worry about wires. Just slide the holder onto the main body of the scope. Inside clearance for the power bank is 100mmx20mm At 20% infill this holder…

Downloads
672
Likes
35
Rating
5
P
PrintablesRaymond Luna

ZWO Seestar S50 Threaded Filter Ring

ZWO Seestar S50 Filter Ring with M48 threads on them to attach any 2" filter to your ZWO Seestar. Yes, the Seestar comes with an integrated filter wheel, but what if you want to attach your own filters to it? I tested this successfully…

Downloads
531
Likes
33
Rating
0
P
Printablesdrhollen

ZWO Seestar S50 Bahtinov Mask

ZWO Seestar S50 Bahtinov Mask A simple focusing aid for when manually focusing the ZWO Seestar S50. New updated design with spring-loaded tangs around the periphery to help hold the mask in place.

Downloads
501
Likes
23
Rating
4.5
P
Printablesdrhollen

ZWO Seestar S30 / S50 Equatorial (EQ) Wedge Adapter - Adjustable

This adapter aids in balancing a ZWO Seestar S30 or S50 smart telescope over the center of gravity of the tripod when used in equatorial (EQ) mode using an adjustable EQ wedge. Say goodbye to field rotation and hello to zenith imaging…

Downloads
466
Likes
42
Rating
3.5
P
Printablesdrhollen

Solar finder for ZWO Seestar S50

Solar finder for ZWO Seestar S50. Get ready for the April 8, 2024 total solar eclipse! This simple device can help you align your Seestar (with appropriate solar filter) towards the sun. If auto-tracking fails to find the sun, you can…

Downloads
440
Likes
22
Rating
5
P
Printablesdrhollen

ZWO Seestar S50 filter adapter

ZWO Seestar S50 filter adapter - for M48x0.75 (2 inch) threaded filters This simple filter adapter is threaded so you can screw in M48x0.75 threaded filters, the typical “2 inch” filters and the adapter slips into the Seestar S50…

Downloads
439
Likes
22
Rating
5
P
PrintablesWes

Seestar S50 Dew/Light Shield With Baffles

After using this for a while, it works fine, but I think the shield with baffles is not as useful as I guessed. Even the ‘flat’ plastics are kind of shiny, so really need either paint or felt flocking, so it's probably easiest to make the…

Downloads
435
Likes
26
Rating
5
P
Printablesdrhollen

ZWO Seestar S50 dust plug/cap

ZWO Seestar S50 dust plug/cap. This has a slight interference fit. Includes tab for easy removal. New updated design with multiple spring-loaded tangs along periphery to help hold it in place.

Downloads
414
Likes
17
Rating
5
P
PrintablesTomInNrthrnIll

Seestar S30 Drop-open Dew Shield V1.2 Won't jam in EQ mode

Seestar S30 Fall-Away Dewshield and Masks-Stop worrying about shutting down with the dewshield installed! Version 1.2 has a longer front plate so that it won't jam in EQ mode! When I bought my Seestar S50, I had to buy this equipment ($70…

Downloads
401
Likes
18
Rating
0
P
PrintablesMazigazi

Seestar S50 Denser Bahtinov Mask

The model was created via https://skeye.rocks/tools/mask/ according to Seestar's specs, hence the lower slit pitch, so that it is easier to focus on objects. The model also fits perfectly in my Accessories Box for Seestar . You may need…

Downloads
327
Likes
14
Rating
5
P
Printableslifour

Seestar S30 dust cover

Dust cover / lens cap for ZWO Seestar S30 smart telescope

Downloads
325
Likes
6
Rating
5
P
Printableswilliamblake

Seestar s30 pro dust cover

S30 pro arrived. Wanted a dust cover. The S30 one works but does not cover telephoto lens. Modified lifour S30 Dust Cover in Fusion360 to fit better. Works okay. Better in Pla Pro or Petg. Version was updated. Has rounded bottom and more…

Downloads
318
Likes
8
Rating
5
P

ZWO Seestar S50 Power Bank Holder

This accessory securely attaches a battery pack to your Seestar S50, which prevents cords from getting tangled as you spend a long night taking beautiful pictures of the sky. Filament - PLA or PLA +, if you're going to use in the Sun then…

Downloads
280
Likes
12
Rating
5
P
PrintablesWH2O

SeeStar S50 Dew Sheld and Holder

Fall-away, baffled dew shield for SeeStar S50. Print both parts, glue them together, and (optionally) paint the whole thing flat black. IMPORTANT: Print the cone part with X and Y (not Z) scaled to 104% for a good fit (and to avoid…

Downloads
269
Likes
9
Rating
5
P
Printablesdrhollen

ZWO Seestar S30 / S50 Equatorial (EQ) Wedge Adapter

UPDATE: I made a new adjustable adapter that I think is better, check it out here: https://www.printables.com/model/1180078-zwo-seestar-s30-s50-equatorial-eq-wedge-adapter-ad This adapter aids in balancing a ZWO Seestar S30 or S50 smart…

Downloads
255
Likes
21
Rating
0
P
Printablesdrhollen

ZWO Seestar S30 / S50 Vixen Dovetail Bars

Vixen dovetail bars for ZWO Seestar S30 and S50 smart telescopes. I made these in both 60mm and 90mm lengths. The 60mm lengths are good for most of the EQ wedge adapters on the market and the 90mm length is good for the William Optics EQ…

Downloads
245
Likes
16
Rating
5
P
Printableswmzenner

Seestar S50 Sun Protection for Body

The Seestar S50 becomes quite hot, when observing the sun. So I made a simple protection for the body which have to be glued together. The plate is printed at 0.3mm 20%, the holder at 0.2mm and 60%. Because the plate should be 270mm (if…

Downloads
231
Likes
18
Rating
0
P
Printablesdm

Seestar S50 telescope threaded filter ring with adapter for customized dew shield

** Preferred material: PLA Pro/Pro PLA+/PETG ** Use your 2" filter ring with my dew shield for your Seestar S50 telescope. I have designed a filter ring with an adapter that can fit my customized dew shield. The dew shield has an inner…

Downloads
226
Likes
15
Rating
3
P

ZWO Seestar S50 Dew Shield

Just print with the flat end on the print bed. Printing Tips: Just print with the flat end on the print bed. You can add a raft if you're concerned about bed adhesion. Filament - PLA or PETG works well. Infill - 15%-100% which ever is…

Downloads
214
Likes
7
Rating
0
P
PrintablesTomInNrthrnIll

Seestar S30 Powerbank Holder

Seestar S30 Powerbank holder. Holds your powerbank on your S30 for all night sessions. Attaches to the side for easy connection of your USB powerbank. Allows extended imaging sessions even using Dew Heater.

Downloads
209
Likes
6
Rating
5
P
Printablesgbirk

Vixen Dovetail riser mount for SeeStar S50 and Sky Watcher EQ Base

When mounting a SeeStar S50 to the Sky-Watcher EQ base, the knob to tighten the dovetail block to the EQ mount will not fit because it hits the bottom of the S50. Many videos show using a long bolt to move the knob out from under the S50,…

Downloads
194
Likes
17
Rating
5
P
PrintablesMartin

Zwo SeeStar S50 anti dew tube

Upgrade your SeeStar S50 with our custom 3D printed anti-dew shield! This sleek black cylindrical attachment helps prevent moisture buildup on your telescope's optics, ensuring clear views even in humid conditions. Precisely designed to…

Downloads
187
Likes
10
Rating
0
P
PrintablesBarty3D

Remixed Seestar S50 Power Bank Holder

Pocket for power bank increased to allow 35mm PB

Downloads
182
Likes
13
Rating
5
P
PrintablesMazigazi

Accessories Box for Seestar S50

The box can fit the original solar filter in the case (or anything else with the size of 67x67x15mm). Additionally it can fit the set of accessories made by PixelatedDad specifically: Custom Diffraction Mask (First slot after Solar…

Downloads
172
Likes
15
Rating
3
P
PrintablesMartin

ZWO Seestar S50 solar filter adapter for Baader

This is simple adapter for new solar filter. I used Baader solar film I had home. Design is based on the original solar filter.

Downloads
169
Likes
10
Rating
0
P

Seestar S50 EQ Mode Mount Version 1.0

Please Note: Come back here often and be sure to download the latest build instructions before printing and building your mount as I am fixing errors and omissions regularly. Please give me your feedback so I can make this project better…

Downloads
161
Likes
25
Rating
0
P
PrintablesDamienStuart

Seestar S50 Pro Dew Shield (magnetic)

This is a simple dew shield for the Seestar S50 Pro smart telescope. It uses 3 magnets (8mm diameter, 2mm thick) that help hold it in place. The print process has to be paused at the layer just before the holes for the magnet are covered,…

Downloads
157
Likes
10
Rating
5
P
Printablesdrhollen

ZWO Seestar S50 baffled light/dew shield for use with 2-inch (M48x0.75) filters

ZWO Seestar S50 baffled light/dew shield for use with 2-inch (M48x0.75) filters. This baffled light/dew shield is an interference fit and slides into place. I've added spring-loaded tangs to help to grip the Seestar. Remember to remove it…

Downloads
155
Likes
17
Rating
5
P
PrintablesWes

Seestar S50 Tripod Spacer

Spacer for using the Seestar S50 on a Sky-Watcher Star Adventurer Tripod. Might want to print with a bright color, because you know you'll drop it in the grass at night. 34mm x 3mm, with 10mm hole for the mounting bolt.

Downloads
149
Likes
9
Rating
0
P
PrintablesImmaginaecrea

Paraluce magnetico per Seestar S30

Paraluce magnetico per ZWO Seestar S30. necessita di 2 magnetini di diametro 5 mm X 1.5 mm. Con la presenza dei magneti il paraluce rimane stabile anche in caso di vento.

Downloads
148
Likes
7
Rating
0
P
PrintablesBG

Seestar S30 dew/light shield

Dew/light pollution shield for the Seestar S30. Friction fit.

Downloads
147
Likes
5
Rating
0
P
Printablesobaeyens

SeeStar S50 2 Inch filer holder

This model consists of several parts. A bottom that is to be put on your SeeStar S50. (Needs to be printed with supports) A Top that contains your filter. A spacer that can be used when you filter is thicker. Robust bottom and top cap to…

Downloads
133
Likes
14
Rating
0
P
PrintablesOscar Diaz

ZWO Seestar S50 Diffraction Spike Mask for Dew Light Shield

Warning, this ONLY works with the ZWO Seestar S50 dew/light shield - baffled. Make sure to print that part separately first before printing this one. Simple yet efficient spike diffraction mask made specifically to fit in dew shield.…

Downloads
132
Likes
9
Rating
0
P
PrintablesDavide Torchia

Seestar S30 / S30 Pro Power Bank Support

Seestar S30 power bank holder designed to keep your power bank securely mounted during long imaging sessions. It attaches to the side of the S30, allowing easy connection of a USB power bank. This enables extended astrophotography…

Downloads
128
Likes
6
Rating
5
P
PrintablesAstrolurch

Seestar S50 EQ Wedges

A simple wedge for the Seestar S50 that can be used at different latitudes. You just need a 3/8-16x1 screw and a 3/8 nut. The nut can be adjusted to 12 positions so that one leg is always pointing north. A tool to tighten the bolt is…

Downloads
119
Likes
12
Rating
5
P
PrintablesTdp347

Seestar s50 tripod support

Simple tripod support for the Seestar s50. Designed to go on weight bearing leg of the Seestar s50 in eq mode.

Downloads
115
Likes
10
Rating
0
P
PrintablesSlegnor

SeeStar s50 Dew Shield supporting All-Pixels Masks

Remix of the Dew shield from SeeStar S50 Accessory Set by Lordwhiteley to support the mask/defraction spike clips from the ZWO Seestar S50 (Lens cap, Levelling pads and accessories set) by All-Pixels . I'd already printed All-Pixel's kit…

Downloads
109
Likes
3
Rating
0
P
Printablesrkayakr

SeeStar dust cap and dew shield

A dust cap and dew shield for the SeeStar 50. Designed in OpenSCAD so you can easily modify it. I printed mine in PETG with a .6 nozzle on my MK3S. You may need to modify OD to fit well depending on your 3D printer and settings.

Downloads
100
Likes
8
Rating
5
P
PrintablesImmaginaecrea

Power Bank per Seestar S30

Power Bank montabile solidamente su Seestar S30, monta su qualsiasi treppiede o testa equatoriale con vite 3/8 di pollice Una sola vite testa brugola M3 X16 mm e relativo dado autobloccante. LO spazio utile per il power bank è 72 X 28 mm…

Downloads
87
Likes
4
Rating
0
P
Printablespdentrem

Seestar S30 Pro holder for ZWO style filter drawers

This is a remix from two different persons. https://www.thingiverse.com/thing:7322662 https://www.allenmaroney.com/allen/SeeStar/s50.htm

Downloads
87
Likes
5
Rating
0
P
PrintablesRJJ

Seestar S50 slide on slide off solar filter

Seestar S50 slide on slide off solar filter. Designed to be able to quickly remove and reinstall the solar filter.

Downloads
87
Likes
8
Rating
0
P
Printablesrkayakr

SeeStar solar film filter holders

Several reports indicate that Baader solar film provides better solar images than the solar filter provided by ZWO. Here are two designs for film holders done in OpenScad. They are slightly smaller in od to be easily inserted and removed…

Downloads
82
Likes
3
Rating
0
P
PrintablesBG

Seestar S30 viewfinder camera cover for solar use.

Version 2 is a much improved model. The area around magnet has been thinned for better connection and the hole is a tighter fit with the solar filter. Printed with Petg.

Downloads
75
Likes
3
Rating
4.5
P
PrintablesJackT

Seestar S50 PRO Dust Cover

Seestar S50 PRO Dust Cover

Downloads
72
Likes
4
Rating
0
P
PrintablesChyneuze

SeeStar Wall Mount

SeeStar Wall Mount for my observatory. This uses this Quick Release Plate Kit : https://www.amazon.com/dp/B0CFQCQ5TH Printing in PETG or stronger is recommended.

Downloads
72
Likes
15
Rating
0
P
PrintablesRansei422

Tripod's legs extender for Seestar

it should fit perfectly to the pipes of the tripod. At least it fits for me. The picture is from old model. I edited it a little bit to be perfectly fitting the anti-slip rubber. Support not needed. Printed it with 6 walls and 30% infill…

Downloads
65
Likes
7
Rating
0
P
Printablesducky

Seestar S50 Battery holder

simple battery holder to increase the "sky time". in this case optimized for the following power bank einfacher Halter für einen Akku um die Beobachtungszeit zu verlängern. In diesem Fall optimiert für folgende Powerbank…

Downloads
62
Likes
7
Rating
5
P
PrintablesAxel Kark

Bahtinov Mask for Seestar S30 Telescope

Remixed Seestar S30 dust cap with Bahtinov slit pattern, smoothed edges, and thanks to the original creator.

Downloads
61
Likes
2
Rating
0
P
Printablesjjlink

Seestar S50 Solar ICE CO 55mm ND100000 MC Glass Filter holder - easy removal

Seestar S50 Solar ICE CO 55mm ND100000 MC Glass Filter holder for the Solar Eclipse. The glass filter is a force-fit. However it is easy removal from the Seestar for totality.

Downloads
60
Likes
4
Rating
0
P
PrintablesTdp347

Seestar S50 dew shield

Tried to make a slightly different Dew Shield for the SeeStar S50 in testing I’ve found this to provide faster and clearer images in my testing. Results may vary. model was printed in Matt Black PLA and no supports where needed.

Downloads
59
Likes
4
Rating
0
P
PrintablesBG

Seestar S30 Bahtinov mask

Used PetG and no supports.

Downloads
58
Likes
2
Rating
0
P
Printablesajai

SeeStar S50 M48x0.75 (Lumicon DeepSky) Filter Holder with Dew Cap and end caps

For the SeeStar S50 automated telescope - a screw together filter holder for standard 48mm X 0.75 pitch thread astronomy filters like the Lumicon DeepSky filter, with a dew shield and dust covers for both ends. The dew shield screws onto…

Downloads
54
Likes
2
Rating
0
P
PrintablesImmaginaecrea

Copriobbiettivo magnetico per Seestar S30

Copriobbiettivo magnetico specifico per Seestar S30, va corredato con 2 magneti cilindrici diametro 5 X 1,5 mm Permette un aggancio saldo e stabile.

Downloads
54
Likes
1
Rating
0
P
PrintablesWH2O

Seestar S50 Baffled Dew Shield with EQ Alignment Shelf

This is a fall-away dew shield for the SeeStar S50, specifically designed for the soon-to-be-released equatorial mode. It includes an sloped shelf, angled for a specific latitude, so you can flip the shield around 180 degrees, mount it on…

Downloads
51
Likes
1
Rating
0
P
Printablesmartinms

Seestar S50 Telescope Adapter for Celestron AVX compatible Stands

Beschreibung in deutscher Sprache weiter unten: This adapter allows easy and quick mounting of a Seestar S50 telescope on your stable Celestron telescope stand without having to make a change at the Seestar or your Celestron tripod. In…

Downloads
49
Likes
3
Rating
0
P
Printablesundertuga

Seestar S50 | Accessories Box

Accessories Box for the kit of utils create by Lordwhiteley ! Seestar Accessories Set: https://www.thingiverse.com/thing:6752376 This is one of the best accessories kit available for the Seestar S50, period! The dew filter is a bit wider,…

Downloads
48
Likes
3
Rating
0
P
PrintablesImmaginaecrea

Testa equatoriale per Seestar S30/S50, Dwarf 3

ULTIMO AGGIORNAMENTO Ho aggiunto il manuale di montaggio sia in italiano che in inglese che renderà sicuramente più semplice l'assemblaggio delle componenti stampate e le viterie varie. Aggiornamento. Ho modificato diverse cose tra cui la…

Downloads
48
Likes
4
Rating
0
P
PrintablesGarin

Seestar S50 Baffled Dewshield Dropoff Remix

Remixed version of drhollen's ZWO Seestar S50 light/dew shield - baffled that is automatically pushed off if the scope closes while it's fitted. I heated the top of the collar (opposite the push off tab so I could flex it to give a snug…

Downloads
45
Likes
3
Rating
0
P
PrintablesBG

Seestar S30 Bahtinov mask (More detailed mask)

Made with PetG, fine detail print settings.

Downloads
43
Likes
1
Rating
0
P
PrintablesWH2O

SeeStar S50 Tripod Counterbalance Parts

Spindle and spacer for a do-it-yourself tripod counterbalance (to counterbalance a SeeStar S50 mounted on an equatorial wedge such as the Skywatcher Adventurer). The 3D-printed parts are the spindle ("barbell core") and a spacer disk (to…

Downloads
42
Likes
5
Rating
0
P
PrintablesJosue

Seestar TC20 Tripod - Level Assist

Seestar TC20 Tripod - Level Assist This is a basic leveling adapter designed for the TC20 tripod . It helps with quick adjustments to level the tripod, whether the legs are extended or collapsed. It’s not an original idea but a redesigned…

Downloads
42
Likes
8
Rating
5
P
Printablesdrhollen

Vixen Dovetail Laser Adapter - Right Angle (ZWO Seestar)

This is a laser holder for Vixen dovetails. This can be used to help polar align equatorial (EQ) mounts. This version is the right-angle model which is particularly useful for ZWO Seestar smart telescopes, due to the position that the…

Downloads
39
Likes
5
Rating
0
P
PrintablesEmanuelK

Seestar S50 Pro - Dustcap

Benötigt werden noch 3 Unterlegscheiben die für eine Schraube M4 passen, also Aussen-Ø9mm x 0.8mm. DIese kann man in die vorgedruckten Aussparungen einkleben

Downloads
35
Likes
3
Rating
0
P
Printablesajai

SeeStar S50 Polar Scop Holder for EQ Mode

Holder for a polar finder scope for the SeeStar S50 which can be scaled to fit any polar finder scope. The pole is not really Polaris, so a red dot finder lined up with Polaris is not accurate. Polar scopes provide the offset needed for a…

Downloads
33
Likes
3
Rating
0
P

Seestar S50 Diffraction Spike Mask for Dew Light Shield - 45° and 120°

These are alternative models of Diffraction spikes to use on SeestarS50

Downloads
33
Likes
2
Rating
0
P
PrintablesEmanuelK

Seestar S50 Pro - Taukappe

Die Taukappe ist mit eSUn PLA+ gedruckt. Es werden 3 Neodym Magnete benötigt in der Grösse Ø5mm x 1mm Empfehlenswert ist die Innenseite der Taukappe zu schwärzen mit einer matt schwarzen Farbe oder einem schwarzen Velour, um Spiegelungen…

Downloads
33
Likes
6
Rating
0
P
PrintablesHubert K

seestar s50 cover

The Seestar S50 does not ship with a dust cover, therefore the lens is always exposed, so I created this dust cover to slot into the lens aperture to protect it. I suggest printing with PETG in order to give it a little flex, the fit…

Downloads
30
Likes
5
Rating
0
P
Printablesarevi

Seestar S30 Pro Lens Cover

This is a specially designed lens cover for the Seestar S30 Pro Smart Telescope. It is easy to print — I recommend PETG.

Downloads
29
Likes
2
Rating
0
P
Printablesdocsascha

Remix of Vixen Dovetail riser mount for SeeStar S50 and Sky Watcher EQ Base

@Gbirk's mount design fitted perfectly on one of my two Skywatcher Wedges, for the second one it was just a little bit to big. Remixed it by removing about 1.5mm from the dovetail-part of the model, works fine now

Downloads
26
Likes
2
Rating
0
P
PrintablesImmaginaecrea

Filtro solare magnetico per ZWO Seestar S30

Filtro solare magnetico per ZWO Seestar S30. Ho usato una pellicola BAADER Astrosolar di densità 5.0 La parte metallica è composta da una graffettta grande (diametro filo 1.2 mm) tagliata e piegata al meglio con delle pinzette che poi va…

Downloads
26
Likes
1
Rating
0
P
PrintablesTomInNrthrnIll

Tripod for Seestar and others

Tripod for Seestar and others I wanted to be able to get my Seestars up off the ground. I designed this simple tripod to do the trick. It uses all PLA. I used PLA Glow on the leg connectors and feet so that it shows up better at night.…

Downloads
23
Likes
1
Rating
0
P
PrintablesEmanuelK

Seestar S50 Pro - Powerbank Halter

Den Halter habe ich in eSun PLA+ gedruckt. Man stülpt ihn über das Seestar und kann darin eine Powerbank verstauen und an das Seestar S50 Pro anschliessen.

Downloads
21
Likes
4
Rating
0
P
PrintablesPetr Stedina

1,25" filter adapter for Seestar S50

Simple design that reuses the approach of a dust cover with the threaded hole in the center to fit the 1.25" filters. Print with PLA or PETG, ideally 0.10mm layer. When using ASA, beware of shrinkage. EDIT: added two more models with the…

Downloads
20
Likes
3
Rating
0
P
PrintablesWolfgang Haist

Seestar S50Pro Distanzadapter

Seestar S50Pro und der TH10 Neiger von ZWO. Mit dem Gewindeadaptter welcher beim TH10 Neiger dabei lag kann ich die Orginal Platte am S50Pro montieren.Es Ist jedoch ein Abstand von ca 1,5mm zwischen der Platte und dem S50Pro. Dieser…

Downloads
19
Likes
1
Rating
0
P
PrintablesNurse Jackass

Seestar S50 vixen dovetail riser with coin slot

A slightly modified version of gbirk's riser model that raises the Seestar up above the oversized knob on the SkyWatcher EQ wedge clones. I didn't have a place to keep a quarter handy for attaching the riser. This remix lets you store a…

Downloads
18
Likes
3
Rating
0
P
PrintablesSparks3D

Power Bank Support for Seestar S50

This support is designed specifically to mount an INIU power bank directly onto the Seestar S50, providing a clean, stable, and cable-efficient power solution during observations and imaging sessions. The support has been engineered to…

Downloads
16
Likes
0
Rating
0
P
PrintablesPablo Simone

Dovetail riser for Seestar S30/S30Pro/S50

I needed a dovetail mount to use my Seestar S30 Pro telescope in equatorial mode, and I found several models, but none of them quite met my requirements. So, I took the measurements of the dovetail mount from my StarAdventurer and…

Downloads
16
Likes
3
Rating
0
P
PrintablesEmanuelK

Seestar S50 Pro - 1.25" Filter holder

Printed in eSun PLA+ In order for the holder to stick to the S50 Pro, you need 3 washers for M4 (Ø9x1mm), which are attached with glue. Please note: When printing the round filter holder[S50Pro-1.25-Filterhalter-Filter-Deckel-V5.stl], the…

Downloads
14
Likes
4
Rating
0
P
PrintablesAlex Kmeť

Seestar Battery Case

For powerbank model YPB 2045 Power bank 45W/20 000mAh YENKEE

Downloads
14
Likes
0
Rating
0

Seestar S50 Pro light shield base ring

Thicker tangs resulting in a slightly larger diameter to grip the seestar s50 pro tighter. I would also recommend printing this particular piece in PETG. It has more flexibility and strength (tangs less likely to break off). I used matte…

Downloads
13
Likes
2
Rating
0
P
PrintablesEmanuelK

Seestar S50 Pro - Solarfilter

Der Solarfilter Halter und den Ring habe ich gedruckt in PLA. Um den Solarfilter-Halter am Seestar zu befestigen benötigt man 3 Neodym Magnete der Grösse Ø5mm x 1mm Von der Baader Solar Folie "AstroSolar® Safety Film OD 5.0, 20x29 cm"…

Downloads
9
Likes
1
Rating
0
P
PrintablesRansei422

Legs Weights for Seestar

This is a new feature for my Seestar tripod Extender v2 to easily add weights for the tripod while using the telescope in EQ mode. *1x Screw needed Tripod Extender can be found at this link:…

Downloads
8
Likes
2
Rating
0
P
PrintablesMecki

Staubkappe Seestar S50 Pro - Dustcover

Da ZWO immer noch keine Staubkappe bei den Seestars mitliefert, muss man eine selber bauen ;-). Gedruckt mit TPU A95. Schichthöhe 0,2mm, Nozzle 0,4 oder 0,6mm Infill sollte vermieden werden: Perimeter 3, oben und unten 4 oder 5 Schichten…

Downloads
7
Likes
2
Rating
0
P
Printables3DJG

Filter holder for the Seestar S50

Filter holder for the Seestar S50. For 2" filters with M48 threads; includes optional protection against dew or stray side light. It attaches to the S50 / S50 Pro using a flexible TPU ring that snaps into place. The assembly consists of…

Downloads
6
Likes
2
Rating
0
P
PrintablesRansei422

Seestar tripod Extender v2

Upgraded version of my previous model featuring: ・longer legs ・added brim for easy print, ・8 degrees bending for maximal contact with ground ・screw hole for external weights and stabilization in EQ mode

Downloads
5
Likes
2
Rating
0
P
Printables

Seestar S50 EQ Mode Mount Version 1.0

Please Note: Come back here often and be sure to download the latest build instructions before printing and building your mount as I am fixing errors and omissions regularly. Please give me your feedback so I can make this project better…

P
Printables

Seestar S30 Powerbank Holder

Seestar S30 Powerbank holder. Holds your powerbank on your S30 for all night sessions. Attaches to the side for easy connection of your USB powerbank. Allows extended imaging sessions even using Dew Heater.

P
Printables

Accessories for Seestar S50

Hello, I’m offering accessory files for the ZWO Seestar S50. The baffle is compatible with Seestar S50 filters and does not cause any vignetting. ⚠ Warning: the baffle must be printed with tree supports. Clear skies! The pack includes: 1…

P
Printables

Seestar S30 Bahtinov mask

Used PetG and no supports.

P
Printables

Seestar S50 Diffraction Spike Mask for Dew Light Shield - 45° and 120°

These are alternative models of Diffraction spikes to use on SeestarS50

P
Printables

Seestar S30 / S30 Pro Power Bank Support

Seestar S30 power bank holder designed to keep your power bank securely mounted during long imaging sessions. It attaches to the side of the S30, allowing easy connection of a USB power bank. This enables extended astrophotography…

P
Printables

Dovetail riser for Seestar S30/S30Pro/S50

I needed a dovetail mount to use my Seestar S30 Pro telescope in equatorial mode, and I found several models, but none of them quite met my requirements. So, I took the measurements of the dovetail mount from my StarAdventurer and…

P
Printables

Accessories for Seestar S50

Hello, I’m offering accessory files for the ZWO Seestar S50. The baffle is compatible with Seestar S50 filters and does not cause any vignetting. ⚠ Warning: the baffle must be printed with tree supports. Clear skies! The pack includes: 1…

NANO DOME V2 — 3D Printable Clamshell Dome for ZWO Seestar S50, S30, S30 pro, DwarfLab 2 & 3 and Mini

Downloadable digital files for the NANO DOME V2 , a 3D-printable clamshell dome designed for compact smart telescopes such as the ZWO Seestar S50 , Seestar S30 , Seestar S30 Pro , DwarfLab 2, 3 and mini The full assembly documentation…

Likes
20
Rating
5