19,010 models
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This simple and elegant Chess set was designed in Fusion 360 from the ground up to be very 3D Printer friendly. The Goals: To make the Chess set look like a Chess set, most of the 3D printable chess sets either need lots of support or…
Print approx. €10.17–€12.43 excl. taxPreliminary estimate for one variant
Using TheBrokenNerd83's design ( https://www.thingiverse.com/thing:3578797 ), I printed the helmet in different sizes and tried to use as little support structure as possible. I share my experience with you in the video. This Video shows…
Print approx. €44.73–€54.67 excl. taxPreliminary estimate for one variant
Stealth Press 1 Important! As of November 26, 2024, this revision of Stealth Press 1 is considered a legacy version. We recommend downloading and building the Stealth Press 1S version. Stealth Press 1 revision will remain accessible for…
Print approx. €7.88–€9.63 excl. taxPreliminary estimate for one variant
Set of One Line Art earrings. Now available with mounting hole at the top - thanks to Crazy Fatty ! Newly added small versions of the earrings - the green ones at the photos. Dimensions - earrings are 1 mm thick Butterflies: 4 x 3 cm…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
276 individually scanned low poly people, models are shared from multiple authors under the CC attribution license. For more info on individual licenses see Loïc Norgeots sketchfab page (original author link). I split, rotated, and…
Print approx. €59.50–€72.72 excl. taxPreliminary estimate for one variant
When installing heat set inserts, a press tool can be a great help to ensure everything is aligned and straight in the end. And if you have a Dremel anyway, the Dremel Workstation can be a very versatile addition to your tool collection…
Print approx. €6.33–€7.74 excl. taxPreliminary estimate for PETGSource material: PET
STEP Files added! Original Designs by Daniel Noree Remix based on OpenRC F1 2022/2018/2017/2015 OpenRC F1 AERO Package: https://www.printables.com/model/469356-openrc-f1-aero-2223 For hardware needs please look here:…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Fits any tabletop within 24mm ↑↑You find the recommended printing orientations in the pictures above↑↑
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
The set includes chess pieces and a playing field. For maximum compactness, all parts are placed one inside another. This is similar to the principle of nesting dolls or stacked chairs. I did similar projects before, but here for the…
Print approx. €3.46–€4.22 excl. taxPreliminary estimate for one variant
We have created a Chess Set that is great for travel and families. All the colours are 3D printed separately, so you do not need an AMS type system. (This also cuts down on printing time) First print the boards and then a set each of the…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
This is a Remix of the OpenRC F1 car by Daniel Noree Video of car: Complete set of parts needed to build functional RC car. Not just the updated parts. Also contains remixed parts I prefered over the original Noree designs. All credit has…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
A Pendulum Wave. Beautiful to watch. See it in action in the attached video. It comes with three sets of Pendula and a pusher which slots into the base. To assemble put an end cap onto the post and then all the pendula with spacers…
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant
headset model: https://grabcad.com/library/adidas-gaming-headset-1
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
Nativity Sheep Set
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
A practical 3-piece funnel set designed to screw directly onto standard PET bottles. 🔄 Each funnel connects using a built-in bottle thread — no slipping or holding required 📏 Available in three sizes: 77 mm , 112 mm , 147 mm 🧴 Ideal for…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
🐾 Abstract Minimal Animals – Forest Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Fox, Bear, Deer, and Wolf . The models are intentionally highly simplified ,…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Metric drill bit set wall mount 1mm to 10 mm
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
You can use these to gauge radii from 2-25mm, just hold it up to the object and see which indentation fits best :) NOTE: this measures radius, not diameter! Printing: This was designed to be printed with Prusaslicers “0.30mm Draft”…
Print approx. €0.54–€0.65 excl. taxPreliminary estimate for one variant
Sandy Mini is finally here! The little sister of Model 11: Sandy from 3D Sets is here. This 1/16 scale non RC version is our easiest to build model ever. No screws needed, all parts are printable, ALL! More advanced models are also…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
Swaddled Baby Jesus and Manger Set Like the manger. The Baby Jesus is so so.
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
This is a set of Depth gauge for 5-12 mm drills. They have a opening for M3 nuts an cylindrical screws to tight the stop on the drill bit. Printed with PETG @ 0,2mm layer hight with 20% infill.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
Customization of Arbitrary hex (Allen) key holder to fit the keys included with the Original Prusa i3 MK3 Kit . 3 mm 2.5 mm × 2 2 mm 1.5 mm × 2 Print instructions I printed using the then-supplied filament (Prusa Silver PLA, not…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Easy-Install Hinges for Your Centauri Carbon Side Panel Tired of removing the whole panel just to get inside your printer? These side panel hinges let you swing open the right-hand panel of your Elegoo Centauri Carbon like a door, so you…
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for one variant
It fits 17mm, 18mm, 19mm and 20mm tabletops. Just choose the right file to download. I have a IKEA table top that are 17mm thick The print on the pictures are made of: Prusament PLA Jet Black And is the 17mm version
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
A set of 12 coasters with a storage container, all based on the different infill patterns that are available in Prusa slicer. The coasters are printed in two different colors with a color swap on layer 3. Print instructions The set is…
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
🎬 Preview Images: The preview renders showcase the clean low-poly geometry of the animal figures and demonstrate how the models look both as standalone sculptures and in realistic environments . They highlight the minimalist design,…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €11.27–€13.78 excl. taxPreliminary estimate for one variant
BOM: Printed with ROSA3D High Speed PLA Signal Violet This model set includes three 3D-printable nut inserts designed for 40×40 T-slot aluminum extrusion profiles . Each insert provides a clean, reliable way to mount M3, M4, or M5 nuts…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
No Support. Glue not required.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
I recently got my Prusa Mini+. After printing some addons, I searched for something to highlight the hexagons in the front plate. Since I couldn't find exactly what I wanted, I created these little insets in tinkercad. On my front plate,…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
These are some Modern-esk hexagonal plant pots. They have the same footprint and the same built-in water tray. There are smallish holes at the bottom of the inside to allow the tray to serve as a reservoir. The mid-sized one was designed…
Print approx. €11.47–€14.02 excl. taxPreliminary estimate for one variant
Hi all I designed a Holder for my PlayStation 5 Headphones, the Holder fits mid-panel & will keep the Headset level, I also designed the distance to be just right so the headphones don’t permanently rest on the side panel. There are no…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
All Carcassonne figures available (including expansions) to replace the ones you have lost or to create full player sets to be able to play with more friends. The figures are separated into two large groups, those that belong exclusively…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
This is the insert and organiser for the war game The War of the Ring Second edition. ( https://www.aresgames.eu/games/war-of-the-ring-line/war-of-the-ring-second-edition ) With this insert I wanted to solve two issues: Ability to sleeve…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant
Adjustable Holder for your gaming Headset. For 20 to 40mm thickness
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
PLEASE BE SURE TO LOOK AT THE READ ME FIRST FILES BEFORE PRINTING FOR IMPORTANT NOTES! Print your own set of parts for RepBox v2.5 and truly make it your own! Includes STLs and gcode for full part set and a separate set for the slip rod…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
Manu Militari (witch translate to “With a military hand” in Latin, meaning using military force or force of arms) is an hex-based terrain tiles system that can be used for wargames, strategy games, RPGs and so on… The tile system At its…
Print approx. €4.44–€5.43 excl. taxPreliminary estimate for one variant
Standard Drill bit set wall mount .0625 to .5 inches
Print approx. €5.66–€6.91 excl. taxPreliminary estimate for one variant
Very nice set of display quality sample chips for PrusaSlicer's Infill options. 13 samples and a Rolodex style case complement any designer's shelf. Each chip shows the 10% and 20% infill values, which is handy when evaluating your design…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
If you only want to print one page, you have nothing to do, but if you want two pages, you can glue or use the pins to assemble When assembling, push the pins into the vices or press. For safety, print out a double dose needle. The pins…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
🐾 Abstract Minimal Animals – Pets Set (Low Poly) This set includes four minimalist low-poly pet figures designed in a clean, modern geometric style: Dog, Cat, Rabbit, and Hamster. The models are intentionally highly simplified, focusing…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
A remix of IOI671701's Hornady Comparator Set Organizer Box . This box will hold: 5 headspace comparator inserts (A, B, C, D, E) 8 bullet comparator inserts 1 anvil 1 spare grub screw (under the anvil) 1 comparator body 1 1/16" hex key…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for one variant
Attaches to the wall with a single screw, large enough to fit any size headband with room to spare. Prints with no supports with wall side facing print bed.
Print approx. €9.82–€12.01 excl. taxPreliminary estimate for one variant
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant , and I wanted some additional wall mounts for the extra Pico remotes that I wanted to install, so I remixed joshcarter's original wall bracket to…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
Setaria Vindis Flower Knight Girl. Im a bit skeptical about the printability of the hair. I applied selective offsets …but it looks like a potential rat's nest of support material in the end. If you give it a go. Do not reduce the size……
Print approx. €18.28–€22.34 excl. taxPreliminary estimate for one variant
This requires a multi-material printer. Please refer to the included gcode and project files for a reference for how to print the checkerboard pattern. A portable magnetic chess set with a storage drawer. The pieces and board have…
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for one variant
Stylish gaming headset stand inspired by the Corsair Gaming ST100 design stand dimensions 120x120x250 The premium headphone stand can be printed on the Prusa MK3/S/S+ printer as a single part. It can also be printed on a PRUSA MINI/MINI+…
Print approx. €7.96–€9.72 excl. taxPreliminary estimate for one variant
This is a solution to store all your Arkham Horror Game Assets. It stores all cards and tokens of the game. It works well with the original Gamegenic card sleeves. The cardbox may be too tight for the older original Fantasy Flight Games…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Hračka pro děti. 3 různé tvary. Třetí model obsahuje pomocný support ale je tam i model bez. Doporučuji suport kvůli spodku sošky a bradě hlavy. Model má malé ruce doporučuji větší velikosti.
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
This is a decorative basketball. Print the two halves, insert pegs into the alignment holes, and glue together. The grooves are designed to fit a 1.75mm filament. You can glue filament in place to emphasize the lines. You could also try…
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for one variant
Este es un juego de ajedrez completo para impresión 3D , diseñado desde cero en FreeCAD con un enfoque paramétrico , limpio y funcional. El proyecto incluye los archivos fuente originales de FreeCAD , lo que permite modificar fácilmente…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Print with a low temperature roughly 195C
Print approx. €3.22–€3.94 excl. taxPreliminary estimate for one variant
I printed the box in Prusament PLA with 0.15 layer height speed profile on MK4 MMU3 (no space for purgetower - so it's a single color print). The magnets require a bit of force to be inserted. I used a hard object to press one side into…
Print approx. €8.97–€10.97 excl. taxPreliminary estimate for one variant
Introducing the Wood Connector LTX, a heavy-duty solution designed to join rectangular wood pieces for creating robust and custom shelves. Engineered with precision, this connector features durable 3D-printed construction equipped with…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for PETGSource material: PET
Even with 0.3mm pitch, embossing looks good. Three M4 standard screws are required for installation, i.e., screws with an outside diameter of 4 mm on the threaded part. Horizontal and vertical grooves are carved around the screw holes for…
Print approx. €13.63–€16.66 excl. taxPreliminary estimate for one variant
As a mechanic i am checking customers brakes on a daily basis. I have used a metal version of this tool for years and I paid $15-$20 for it. It's a useful way to measure how much a brake pad is worn down and communicate it to the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
This is a simple headset holder for your desk. It fits up to 30 mm thick desks and holds headsets with a headband of approximately 43 mm wide. It was designed for the Steelseries Arctis 7 headset but will work with many more similar sized…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
This is a tool to correct the angle for a triple monitors setup for sim racing
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
This tray fits cards ~68x45mm which you can find in the german version (Kosmos). Not sure about other versions. It's a remix of thing:4703126, which was made for slightly wider cards from international versions (had to find it out the…
Print approx. €4.91–€6.00 excl. taxPreliminary estimate for one variant
Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
Print approx. €7.00–€8.56 excl. taxPreliminary estimate for one variant
A set of 10 coasters with a support rack, with the imperial crest from starwars. You might need supports for the rack (for the lettering on the front and the imperial crests on both sides). For the coasters I used 30% infill with…
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for one variant
Short facts: Fast print (smallest versions are below 2h, biggest below 3h) Strong design to support heavy headsets A small cable organizer to hold the cable Fits up to 6mm headsets Two versions 1. Clampable Table widths ca. 10-30mm It has…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant
Introducing my easy-to-use and fast-to-print headset holder for the PS5 ! Designed with gamers in mind, this simple yet effective holder clips easily onto the top of your PS5 console, providing a convenient and secure place to store your…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
edit: There is an improved version designed for PETG now. If you own the headset, you probably already know the original headband is very prone to cracking. There is already rudimentary replacement part out there but I wanted nice,…
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
The "Basic Shape Set" is a starter set for little explorers who are just getting acquainted with the world of shapes and colors, while helping to stimulate fine motor skills and eye-hand coordination. For little explorers who are ready…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
Update 11/09/24: Added lever for TS100/101 and PINECIL iron mounts. A simple lever that can be screwed onto the soldering iron mounts. The lever model with “TS” in its name fits the TS100/101 and PINECIL mounts of the press. These are the…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
A set of skull-decorated cymbal mount nuts for a drumset (designed for Roland e-drum mounts, but will sure work for others too). The skulls were remixed from a wonderful design by bugman_140 (…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
V2 is updated to include 10Lb and 5Lb weights, a chamfered edge to make it easier to tell edge to edge plates apart, improved fit tolerances, and a bar with integrated gripping hands. Per izkariot_438646 's suggestion, I've also added a…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Chess Dubrovnik Set - mod easy to print Kingsize 4.96" (for a board with 70mmx70mm fieldsize) Chess #Dubrovnik #Staunton /////////////////////////////////////////////////////////////////////////////// The set - except of the knight - is a…
Print approx. €16.34–€19.97 excl. taxPreliminary estimate for PETGSource material: PET
Quick edit for usage with HSW
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Drawer insets in various sizes with different compartments for the IKEA Helmer drawer unit. I sliced the the model with thirds vertically in half as a smaller variation. Only when creating the technical drawings I noticed that the model…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
A simple heating pipe cover printed in PETG. Supports needed only for the bolts connecting the two parts (see included picture of print) Printed on Prusa Mini+ with standard profile 0.15mm. CAD file .f3d for Fusion360 included, parametric…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
I originally designed this canister to hold my Flexcut carving set. But I quite like this model actually and want to use it for a bunch of other things. It's kinda shaped like a chunky peanut butter jar… and will look like one too if you…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Set of stencils that can be used to make a cappuccino art with cinnamon or cocoa. Can be also used for Christmas cookies and sugar decorating. So far the set includes: star heart 3 small hearts hexagon grid hexagon flower smiley face…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
A great small thing! With this, you can set your plants at the exact hight you want them to be in the pot! And it also helps the plant not to stand in water. Important information: The models can be easily scaled to the right hight by…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Attached are STL and BGCODE files (PLA)
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
I wanted to make a set of POGs and Slammers similar to those made famous in the kid’s game of the 90’s. The history and gameplay can be found here: https://en.wikipedia.org/wiki/Milk_caps_(game) . I used the dimensions found here…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
For little explorers who are ready for the next challenge, there is the "Advanced Shape Set". This set expands the horizons of learning by introducing more complex shapes where it helps stimulate fine motor skills and eye-hand…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
This print is a continuation of my design from last year . The actual plow is reusable from one to the other, I just fixed a minor issue where it was accidentally slightly angled up on the right side and added the height adjustable…
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET
Fun dangling earrings with a snake for each ear. Utilize filament changes for color change. Size up or down but watch the size of the post hole. We included the gcode, so you can print as a set, or flip one to make a perfect face-framing…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
I have only printed in PLA so far, but will try PETG. Print settings (CURA) 5 walls Slicing tolerance exclusive 20% infill Assembly is fairly straightforward, the spinner body can hold 2 AA batteries for a counterweight but other heavy…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant
While using the Mk3 I also used the excellent Prusa Mk3 bin created by mkoistinen. The Mk4 has very different Z stepper mouldings. Whilst taking inspiration from mkoistinen’s design I have created a pair of side boxes that contour to…
Print approx. €7.79–€9.52 excl. taxPreliminary estimate for PETGSource material: PET
Perfect for turning a tab-out cassette into a tab-in cassette for recording purposes. These tabs easily click in and click out and can be used over and over again.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…
Print approx. €13.19–€16.13 excl. taxPreliminary estimate for one variant
In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
I remixed these from topxnbo on thingiverse to be the same thickness for the bar as the depth guides. I also added an easy angle gauge to each bar. 1/8" - 90° angle gauge 3/16" - 85° 1/4"- 80° 5/16" - 70° 3/8" - 60° 7/16" - 45° 1/2" - 30°
Print approx. €8.61–€10.53 excl. taxPreliminary estimate for PETGSource material: PET
This is a variation of the spirograph toy with several rings and discs for spiral patterns. Nice for kids to wile away a rainy day, as well as adults who have to endure boring meetings. Please let me know if you come upon interesting…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh
Print approx. €5.90–€7.21 excl. taxPreliminary estimate for one variant
Set of 4 coasters with Emoji Theme 95mm x 5.6mm approx Added STL Files
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
I had a cheap (7.49) set of Harbor freight Titanium Hex Shank Drill Bit Set, 13 Pc. lying in the bottom of my tool box and decided the only way I was ever going to use them is if they where organized and in a case. So I got out the…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
![Chess Figure Set Dubrovnik [GIANT - Kingsize 4.96"] - mod easy-to-print [for a board with 70mmx70mm fieldsize]](https://media.printables.com/media/prints/214927/images/1964582_f2626a6b-a6d4-47c0-bf33-d747f950b9fc/2022-05-27-20_52_51-window.jpg)
