350 models
About the tool A simple whetstone knife sharpening aid. Helps when getting started sharpening blades using a whetstone. 4 Different angles for different types of blades. 14°, 17°, 20°, 25°. Common Sharpening Angles: Pocket Knives- 20°…
Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
Better Cleaner overhangs! Teardrop shaped hole with horizontal ring edges. Stronger parts! Weak point at the top eliminated. Rounded edges on contact surfaces! Helps reduce friction between the tool and working surface reducing wear and…
Knife sharpening helper / guide for 60 x 180 mm whetstones. Remix of "Whetstone sharpening helper" by Rejd (thingiverse.com/thing:2493459). Sliders, slider angles and base plate shape were modified. Max stone height: 30 mm Angle…
Useful tool for getting proper angles during knife sharpening on whetstones.
I really liked CNCKitchen's sharpener design, but I wanted some extra refinements, making the construction a bit simpler, using not so many different types of screws. So here's my remix. Changes from V2.1: redesigned handle for quick…
Simple angle guides for knife and tool sharpening. These are not designed to clamp to the knife or hold the angle for you. They are designed to help if you are learning to freehand sharpen. Just rest the knife against the guide, lock the…
A tool for sharpening the tip of a drill bit. The angle of the tip of the bit is 121° degrees. If your angle grinder has
Насадка на точило с абразивным кругом для заточки свёрл , угол при вершине 130°. Насадка подойдёт для сверла диаметром до 10 мм, угол 130° может быть использован на свёрлах по дереву и мягкому металлу. Насадка крепится к точилу болтом М6…
I added text to it so you can remember the use. PLA, 0.15 mm layer height , 10%infill.
This is the fully revised Version 2.1! Watch how to make and use one: https://youtu.be/IM2il-zT2fA Bill of material: Suitable sharpening stones set(aff): https://s.click.aliexpress.com/e/_onjGrqw OR Individual sharpening stones (aff):…
This is a chisel sharpening jig. It accommodates chisels as small as 0.25 inch and as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side…
This guide is used to get the right chisel and plane projection lengths when using an eclipse style sharpening system. Its pretty similar to the original that it's remixed from except I added a lip to use it on the edge of the bench and I…
Sharpening jig using a whetstone. Baseplate has guiding rails, knife just gets inserted either in the 25° slot or laid on the 20° flat of the slider. Not even quite sure what to use the 25° for besides pocket knives that get heavily…
Customizable sharpening guids for whetstones / sharpening stones. There are various other versions of such guides available, but none of them made me 100% happy. This one is customizeable in size and keeps the rubber band safe in its…
UPDATE 2024/29/05: Added holder for stone 51,2x19,6 mm. Name is KSJ-06-06. UPDATE 2024/31/03: Added revolving grinding stone holders. KSJ-06-04 is for attaching three stones at once and KSJ-06-05 is for attaching four stones. That means…
Attachment for a sharpener with an abrasive wheel for sharpening drills, angle at the top 118°. The attachment is suitable for a drill with a diameter of up to 10 mm, an angle of 118° can be used for most types of drills. The attachment…
Fits a 66mm or less wide common sharpening block. Fixed at 17 degrees for easy operation. Very hard edge knives can take a 15 degree edge, cheaper common ones last longer at 20mm. 17 is a compromise angle used by many for a wider variety…
The tool is a remix of the fantastic original model, which is super easy to print and works great. It has been redesigned to fit Parkside (Lidl brand) AC Multi-Tool "Dremel" tool and adds additional features. For small drill bits push the…
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
I recommend scaling up to 1" on the sides (166%).
With this slip-on tool you can easily sharpen you drills. it will slip-on the protector (1mm with) of your angle grinder. I printed it with PLA but i think it is better to print it with ABS. Use brim and full supports only on the bed…
I wanted to made my own sharpening guide getting inspiration form the ones available on the market, several designs I found on internet and the one I built some years ago with pieces of wood and furniture rolls that wasn't so accurate I…
Knife sharpening guides for whetstone sharpening. These guides will help you learn what holding a knife at 45 degrees to the stone at an angle of 20 or 15 degrees feels like. These guides will help you develop the muscle memory for…
Update (9/16/24): added .f3d file so that you can customize the angle as desired in Fusion 360. You will need to install the Parametric Text add-in if you want the angle text to update automatically. Fully printable guide for your…
I bought a 9-piece set of sharpening stones for Stefan's CNC Kitchen knife sharpener ( https://www.printables.com/model/81237-knife-sharpening-tool-v21-with-video ), but needed a way to store them. There are cases for smaller sets but not…
The safest knife is a sharp knife! This print is a mostly 3D printed knife sharpening fixture. The fixture features a magnetic plate that securely holds your knife while sharpening, a sharpening stone holder with a sliding rod for…
a JIG inspired from the already not available JIG SV 45 from Tormek, as they replaced it by the new KJ-45 JIG, proposing a better centering of the knife and as a consequence a symetric angle of sharpening for both sides. However, offering…
Use case Helps to hold a certain angle while sharpening (kitchen) knives on a stone. The jig matches sharpening stones that are 70mm wide. I designed it with the Shapton KUROMAKU series in mind. Variations Model comes in two variations:…
Hello! I appreciate Mr. Vitaly12 for the idea that has helped improve this project. Usually, I tend to over-engineer things, but this jig is designed for stones with a thickness of 60mm. I based the measurements on the PARKSIDE stone…
Need help finding that exact sharpening angle? These are helpful when you suck at sharpening. (sorry the photos are of them on my old anet a8) EDIT: Fixed an issue where the number were not attached to the blocks.
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
Sharpening jig for hand-engraving tool based on the Lindsay Sharpener type templates https://www.airgraver.com/sharpening.htm . These can be used instead of a goniostat. The fusion file is parametric for all sorts of things: Graver…
I wanted to print the original model on my Prusa MINI, but it wouldn't fit the smaller build plate even when rotated...so I edited the file by chopping off the corners so it would fit! You will still need to rotate the model to fit…
Přípravek pro ostření vrtáků, první pokus, docela funguje.
Knife sharpening guide Width of the grinding stone 60mm --15, 18, 20 degree, Schleifhilfe für Messer Breite des Schleifsteins --15, 18, 20 Grad 60mm Designed for the Parkside Knife sharpening Stone Printed in PLA No Support needed Infill:…
A simple 3D printed TPU fixture that lets you re-sharpen Luba Automower blades at the correct angle — instead of throwing them away and buying new ones. The jig holds the blade at ~12° per side (~24° inclusive), which matches the factory…
This is an angle gauge with commonly used sharpening angles for chisels and planes. Printing the final layer in a different colour will make the gauge easier to read. See the video here: https://youtu.be/9Hs2RRfNoJw
Fully Metric Remix of "Better Chisel Sharpening Jig" by @GarageTimeDavid_3790 Changes: Adjusted hex holes from ¼" (11.1125 mm) to 10 mm to fit M6 bolts Adjusted round holes from 8.4 mm / 6.4 mm to 8.0 mm / 6.0 mm respectively
A simple rod sharpening angle guide for a belt grinder or similar. Give your broken drill bits a new life with this foolproof angle guide! Universal angle of 120° horizontally and 7°, 10°, 15°, 30°, 45° and 60° vertically. This way you…
I thought this would be a a simple part to design… boy was I wrong. The reamer on the 91mm Swiss Army Knife (same reamer on the Ranger Grip series) has a curved edge, it begins at a 96° angle from the knife body and is bulged for the nail…
Насадка на точило с абразивным кругом для заточки свёрл , угол при вершине 135°. Насадка подойдёт для сверла диаметром до 10 мм, угол 135° может быть использован на свёрлах по дереву и мягкому металлу. Насадка крепится к точилу болтом М6…
I always failed in correctly sharpening my chisels, so i thought of a method to always sharpen correctly without spending > 100 bucks for veritas tool. I came up with this solution. You need: Diamond Stone / Wetstone I took the SHARPAL…
When I published the 1st version of the Wood chisel sharpening guide I was already thinking about a way to adjust the guide to chisel width without 3D printing and replacing the removable spacers (in orange in the picture below) Design So…
Printing: Main Gouge Clamping Body - 40% infill or higher, print on flat backside Lower Hinge Post and Assembly - 75% infill, 10mm brim, print vertically Main Clamping Body - 40% infill Horizontal Base - 20% infill Follow JL Designs…
Hier ist eine Schärfhilfe für Stechbeitel und schmale Hobelmesser. Durch die verschiedenen Halter ist gewährleistet, das der Stechbeitel immer genau mittig und rechtwinkling in der Aufnahme sitzt. Es sind Halter für die Breiten 25mm,…
Block for Drillbit Sharpening with Adapters for different Sizes.
A storage box to store 160mm sharpening stones mounted to aluminum backs. This box comfortably fits my stones without them being snug, but yours may be different, and printer tolerances will make a difference. Models are included for 5 or…
A jointer knife sharpening jig, customizable for whatever dimensions your jointer knives are. You'll need 4x M3 nuts, and 4x M3 screws (12mm long worked for me). Make 100% certain you print it standing tall, not flat! Otherwise tightening…
This is an add-on for the CNC Kitchen's knife sharpening tool . I didn't really like the way magnets are holding the knife (especially if it's a bigger one) in the original design, but I also didn't want to redo the whole base. This…
This is a remix of the metric remix by @energeticinterpretation44 of the original model by @GarageTimeDavid_3790 All I did here is to enlarge the M6 holes slightly so that M6 bolts have proper clearance. All kudos to the original makers.
I ordered a new Lansky knife sharpening kit after having coveted my uncles for years and found that it didn't come with a base or a stand of any type. Rather than order a base and wait a few more days to finally get my knives out of their…
Description Fix your knifes in the jig and sharpen them at the same time to get a perfect 30 degree angle. Use multiple jigs if you have longer blades. Minimal thickness of the knifes is ~2mm and minimal width ~18mm. Print settings…
Knife sharpening angle guide with 15, 18, 20 and 22 angle
Depth Gauge guide for sharpening a chainsaw chain use like the guy in this vid. Category: Outdoor & Garden
Guide which fit your knife to make it easier to keep a constant angle during sharpening. The overall size is very similar to the remixed model so the angle calculations taciucmarius has in the description should be pretty accurate for…
Knife Sharpening Tool - Best of remixes Designed 2021-05-16 thing:4860228 printables:249523-knife-sharpening-tool-best-of-remixes TOC Knife Sharpening Tool - Best of remixes TOC Description BOM Sharpening Tips Buy me a coffee? Description…
an angle guide/jig to sharpen knifes for stones (max 75mm or 3" width) script to customize
Sharpening guide for the Victorinox diamond knife sharpener. It helps you keeping constant angle (20°) when sharpening your EDC.
Diese Schärfvorrichtung habe ich in einem Video eines sehr geschätzten Youtubers gesehen, den er von einer ebenfalls sehr geschätzten Firma hat. Hier ist meine Variation davon mit fixem Winkel zum Hinterschliff des Freiwinkels. Ihr könnt…
i made this to hold a set of the standard Edgepro stones as well as a set of TSPROF diamond stones. there are also two slots in the back for lapping tape
I cut off the tip to avoid hitting the blade when sliding on the whetstone Print Settings Printer Brand: Creality Printer: Ender-3 Neo Rafts: No Supports: No Notes: Print at 150 or 200% for better handling Category: Hand Tools
Do you have a TSPROF kadet sharpening system? Do you want a handy storage box for the sharpening system that needs nothing but a 3D printer? This is the model for you! The TSPROF KADET is an amazing sharpening system, but it does not come…
To keep your wet sharpening stone steady when in use. To assemble you will need: 4 pcs of M6x35 bolts 4 pcs big M6 washers 4 pcs M6 wing nuts 4 pcs spring washers to the bottom (optional) ~ PVC pipe with 22 mm outer diameter
Hello Gentlemen Starting a project to make a jig for sharpening the lathe tool, this project will be create to use bar steel, few welding point, and no machining work. I think that will take a couple of months to be finished Regards…
Use 15% - 25% infill. No support needed.
2020 extrusion used for main vertical beam. You can probably print your own extrusion because it doesn't need to be all that strong. Use phone to determine sharpening angle. Currently uses a cylindrical magnet to secure the knife to the…
I recently purchased the Drill Press Sharpening System V2 kit from Taylor Tools, and realized I didn't have the time/materials to build the accompanying jig for chisel sharpening, so I modeled it up and printed it! Thanks to the Taytool…
I modeled this tool to help sharpening robot mower blades. The tool has holes for screws for tightening the gap, but the gap is tight enough to hold the blade without screws. Designed for 0.6mm thick blades. The side of the tool has an…
Visual guide to sharpen chainsaw maintaining the correct angle (30°, 35°) 2 magnets needed Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 50 Category: Hand Tools
I also have a passion for leather crafting, and I've designed this tool to help me sharpen edge bevelers. I hope it will be beneficial for your needs as well. Enjoy!"
Stone holder, lid and magnetic pocket for the angle guide to be neatly stored. Allows the stone to be used at a nice height. I recommend sticking some rubber dot feet the the underside for grip. or piece of an old bicycle innertube also…
Fits 70mm wide stone Designed in Fusion360, Printed in PETG, 15% infill, 0.2mm layer height but any material and settings should work Fins on the bottom help to keep the guide from scooping up the wet slurry from the stone, the guide also…
This is a simple jig to enable sharpening of router plane blades using the Tormek sharpening system. I also offer some other jigs for hand sharpening of router plane blades . It's designed for cutters that have a square cross section that…
A proof of concept for sharpening gravers using the GRS style sharpening jig. The jig slides on a pillar which means it holds the angle independent of height and stick-out so might be better for electric sharpeners. I used a 10mm steel…
I liked @William_223753 models but wanted a 17 degree version. I wipped one up in Fusion 360 and this is the result. I made the model from scratch but the design is a copy of William's work. I hope you find it useful. I printed on the…
Angle guides for freehand knife sharpening. 3 different models each with 4 different angles ranging from 25° to 10°. Optionally magnets can be glued in. The slots for the magnets are designed for 12mm x 2mm magnets though smaller ones can…
Visual guide to help align file while sharpening a chainsaw. This uses 12mm x 3mm magnets that I had on hand purchased here: https://www.amazon.com/dp/B09BJYVBR6?_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_JSGE5C6P9E539JZ5HK5K This is used…
Made using the blank clamp template STEP file from the original model. It fits 42mm planer blades. The slot is 1.4mm deep, so it should fit blades of that thickness or thicker. Since I only had 608 bearings instead of the 606 bearing…
Note that this is for skewed chisels (as used by woodworkers for cleaning out dovetail sockets etc), not skew chisels (as used by woodturners). Skewed chisels ( like these ones ) have a single bevel at a steep angle and make it much…
I like to keep my knives sharp. However, finding where to soak my sharpening stone was always a pain. So I decided to develop a case that can accommodate multiple tasks. Soak a whetstone and don't take much space. Hold a whetstone and its…
I needed a box that would fit 8 diamond sharpening stones for Ruixin. I think these should also fit Edge Pro. Fits stones up to 165mm length, 24mm width and 9mm thick. Fusion model is attached; there you can theoretically modify these…
Simple but sturdy base, better ergnomics than just a flat plate on a desk. I added some rubber feet to prevent slipping but double sided tape should work in a pinch. Regular PLA 3 walls 15% infill
I wanted to learn how to sharpen my chisels and plane blades by hand, but had the realization that it takes some practice to really learn the angles that you should sharpen a blade at. So, I figured a sacrificial piece of plastic would be…
The Katz-Moses sharpening guide from kmtools.com is more than a bit fiddly to align properly without dropping your chisel a dozen times during the process, so I designed a jig to hold everything steady and get you close to the two most…
This is a set of mounting brackets so you can hangs the DBS-22 Drill Bit Sharpening jig from the wall There are 3 parts One for the base plate One for the drill holder One for the magnifier
Being disappointed in the lack of printable screwdriver sharpening jigs and time it takes to ship one from China – I made my own This model accepts screwdrivers up to 6mm in diameter Side screw allows easy flipping to sharpen evenly Use…
Since it can be tricky to accurately hold a block plane’s blade or a chisel correctly for sharpening, this honing guide is designed to help. A chisel should start with one bevel, which is formed on the blade, usually by grinding it at a…
A template that allows you to easily sharpen your knife at the desired angle on an abrasive block. Knife sharpening angle guide 30°, 35°, 40° and 50° angle. (Added a version for sharper angles: 20, 24, 28 and 32°) Size 60mm x 60mm x…
These are sharpening wedges I use on my whetstone to get a consistent angle on my blades.
Super simple holder for your sharpening stones. Just print and use. I bought a one meter long 12mm stainless steel threaded rod to use with my holder.
A simple tool designed to assist in sharpening carpenter's pencils. Use a blade and glide it along the tool as a guide to sharpen each side. Begin by sharpening the wide sides, then proceed to the narrow sides. P.S. To accommodate shorter…
Tolerances must be tight for a no-wobble fit. Print 2 nut holders, and fit 2 8mm bolts in there. Press fit 2 nuts in the plane part (hexagonal holders). Bolt stiffener to main connector with M3 screw and nut. Mount jig to water bucket…
Use these sharpening blocks to restore a fine edge on your utility knife blades. Two angles are provided, but the Fusion 360 source files are also provided. For best results, use a very fine grit or diamond stone.
I created this model to provide myself 17 degrees angle when sharpening knives on diamond plate. My previous model allowed to keep knife under 90 degrees on diamond stone, but this sharpening guide keeps the knife under 17 degrees while…
2 versions of a Bandsaw sharpening jig that is designed to hold any rotary tool (like a Dremel). It is pictured here with the Dremel 8240 which is among the largest of the handheld rotary tools so it should work with most any others. It…
This is a sharpening jig for the Shopsmith lathe chisel set. The intent of this is to replicate the functionality of the sharpening jig that has been discontinued. The sharpening guide allows you to sharpen the Shopsmith lathe chisel set…
A simple wedge to check the angle you're holding your knife at when sharpening on a stone, 20° for western chef's knives and 30° for western cleavers. Will double as a door stop if you put something grippy on the bottom. Be sure to put…
Interlocking guide for sharpening kitchen knives. Degree of inclination of 16 degrees. The support base is removab
