212 models
When trying to repair joy-cons I as do many people, striped one or more Y-screws and had to damage the shell remove the screw and repair the joy-con. So I needed a new shell but why buy something small and made of plastic when you have a…
Print approx. €5.96–€7.28 excl. taxPreliminary estimate for one variant
Benefits Deep, consistent root growth The ribbed sides and taper encourage downward and perpendicular root structure instead of balling or clumping. An open bottom air-prunes roots to further avoid balling or clumping. Separating…
Print approx. €11.89–€14.53 excl. taxPreliminary estimate for PETGSource material: PET
Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…
Print approx. €8.95–€10.94 excl. taxPreliminary estimate for one variant
11/24/25 Update - Added 2.75 inch high brass, 2.75 inch low brass and 3 inch high brass iterations. The 2.75 low brass even has an 8 petal crimp. I was doing some mid-season organization of shotshells in my ammunition cabinet, and started…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Best printed in PETG. Model shown printed in 0.30mm layer height, 0.65 extrusion width, nozzle 0.4mm, infill 5-10% cover must be printed with supports.
Print approx. €5.29–€6.46 excl. taxPreliminary estimate for PETGSource material: PET
25 round holder for 28 Gage shotgun shells
Print approx. €9.93–€12.14 excl. taxPreliminary estimate for one variant
“What are Silly Shells?”: Silly Shells are an ecosystem of 3D printed shotgun shells for homemade Nerf-style blasters! There are many, many different shells to use in each blaster, allowing one blaster to fire a wide variety of ammo types…
Hey there! Chances are, you're the proud new owner of the Pulsefire Saga or Pulsefire Saga Pro (or maybe even both!). We wanted to provide you with the STL and STP files for your mouse's out-of-box parts as well as some bonus shapes and…
3 different models of shells. No special settings for printing.
These shells have magnets so that Settlers of Catan hexes stick together and the board doesn't get shuffled around. I was heavily inspired by the model this is remixed from, but I made these models from the ground up with the following…
"Of unimproved metal, hot and full" Fortinbras is a fully 3d printed single shot flare blaster that uses absolutely zero hardware other than 1/8th inch elastic (other sizes should work). It fires using stringer shells that I also…
These shells are designed so that the upper half has constant printing width to have a homogen translucency. As shells of just equal radial shell thickness would be printed inhomogen getting bigger wall distance .
Revolutionize Your Seed Cleaning Process Tired of spending hours tediously cleaning your harvested seeds? This 3D printable seed separator offers a quick and easy solution that saves time and money using ordinary house hold equipment - a…
Updated 5/5/23 - Added rear hole to allow use in Shellstrike. Main dart diameter changed from 9/16" to 17/32" to more accurately mimic real life shell. Fillets also cleaned up to look nicer. Works just like the one that came in the box.…
Mold used to prepare chocolate figures placed as decoration in a sea life Birthday cake. Can be used with fondant or dough too. The shells and the seahorse have a plug above that can be removed after printed. The shells one was used to…
I was interested in the idea to 3D print ball bearings. So I designed a parametric model with Fusion 360. The model can generate 3D printable ball bearing shells according to the number of 6mm airsoft BB it will hold. More BBs in the…
IF YOU REMIX THIS, PLEASE LET ME KNOW, legally I can't oblige you to. But I would love to know what you make so I can add a list of remixes to the post! The 40max shells are super popular, but strangely enough lack a large amount of…
This is a remix of xcnerd88's sledgefire shell. The barrels have been adjusted for a tighter dart fit, and the shell is tapered at the front for easier insertion. I have also added bars at the back to prevent pushing the darts too far…
Dart shells, compatible with all Buzz Bee toy blasters. These allow for compatibility with solid-core darts. They have better performance characteristics, and you should see an obvious performance increase over the stock shells. You can…
A simple Silly Shell holder! Originally designed for the Wildstyle Shotgun Pistol blaster. Two files are included. Holds one shell on either side of a picatinny rail. Symmetrical. Holds two shells, one on each side of a picatinny rail.…
*UPDATE 31.12.25 → Now includes models for 12gauge Shells of the 3 major legnths. Be sure to choose the right variant for yourself. *UPDATE 02.03.26 → Added a blank front face for all variants. Now you can write on it as you please. A…
Top and bottom clamshell cases for PiBox. Order the PiBox PCB boards and learn more at pibox.io
models were featured by Bob from RetroRGB on one of his livestreams ! These models are the updated versions already, which fix the issues seen in the stream. You can also order them through PCBway's shared project here:…
S I Z E S INCHES MM outer diam. x height outer diam. x height BASS DRUM 22 18 558.8 457.2 FLOOR TOM 16 16 406.4 406.4 SNARE DRUM 14 6 355.6 152.4 TOM 13 13 9 330 228.6 TOM 12 12 8 304.8 203.2 Dimensions refer to the most common sizes. In…
I was unsatisfied with the backshells available for download, and I had none handy, and I figured it wouldn't be a tough build. These clamp together nicely and are locked together by the SHCS when assembled. They fit Tayda D-sub…
This is remix for adding some shelving for the aeroponic grow tower. It can be used for additional plant support, or for support of additional lighting when growing indoors. The original support was for 3 way planting, now you can use it…
I fixed the original model by removing the wood grain from the bottom, and fixing the text so its not floating.
This project start from a necesity of my wife. She is a teacher, she has a little student that cant see. So she need to different object to feel. So I found this file, https://www.printables.com/es/model/514261-coconut-shell Thanks to…
Current ammo selection is as follows Ultra Dart (2 versions) Mega Dart (2 versions) Full Length Dart (2 versions) Half Length Dart (2 versions) BoomCo Dart (WIP, still refining)
All credit goes to GDop26, I just figured that Printables could use the spring thunder files to make finding and using them easier, I'll gladly take them down if GDop26 would upload them to Printables and message me! Thingiverse…
Background I printed these as a homage to the movie Demolition Man (1993) staring Sylvester Stallone and Sandra Bullock. In the movie Stallone (awoken from cryogenic sleep many years in the future) is confronted with a modern toilet that…
F1 themed RC car shells specifically for RC Pocket Racers through As Seen on TV. The cars are approximately 1/67 scale. My family got several of these and we are big F1 fans and wanted to create our own races with cars that we recognized!…
please see Sillybutts' original model for print settings & such. I found my NFStrike Mega accufakes were consistently a bit larger diameter (19.5mm) than the stock nerf mega darts (19mm) and as such, the original silly shell for mega was…
Funnel for powder and shot for 12 gauge shells.
NEEDED HARDWARE 23x20mm Aluminum tube. Could be any material as long as the walls are 1.5mm thick and matches the aforementioned dimensions. Length is up to you. The one in the render is 270mm. 3mm Aluminum Rods x2 100mm longs. To…
I like my Knosti Disco-antistat vinyl washer, it's not too expensive, and it's doing a good job. But unfortunately, it lets in a bit of water along the o-ring gaskets, causing the labels to dissolve a tiny bit along the edges. So I maked…
This is remix for adding some shelving for the aeroponic grow tower. It can be used for additional plant support, or for support of additional lighting when growing indoors. LED grow strip lights can be added to the inner diameter of the…
These modified silly shells are made to be loaded into the Yeethammer, then twisted (or clipped form the barrel) to prevent ejection when reloading. This lets you reload the Yeethammer much more quickly by only loading darts instead of…
For 50 Cal Air Rifles. You could buy them from amazon but why not just make them. Created by request. Hope this works for you Mark. I recommend printing the files marked "Vase Mode". When printing in vase mode start with ( 3 bottom…
If you are interested in keycap molding, you maybe came across these from Amazon: https://www.amazon.de/-/en/gp/product/B08DKRZZ48/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1 Unfortunately they have no way to center the lid and are too…
The shells are printed with " colorfab PLA woodfill"; 0,15mm Layer and 0,6mm Nozzle. After printing the woodfill shells are colored with wood stain. In the bottom, a negative volume for a magnet 3.5 x 3.5 x 4mm was cut out before slicing.…
Here you can find some of my designs for the Hardcore-Begleri Begs from Aroundsquare ( https://www.aroundsquare.com/products/hardcore-begleri-hardcore-gut-beads ). Some are just fun and others are very playable. Try them out and find your…
The Nerf Trilogy is a massive shell-loading, shell-ejecting pump-action 3-dart shotgun. I found other rival round shells, but they all seem to use just one massive hole in the middle or are missing the little side bumps so they don't fit…
Original model https://www.thingiverse.com/thing:4672484 I originally tried to paint this model in Prusa Slicer but there are a lot of nooks and crannies making it almost impossible to get 100% coverage. I separated out 44 different…
Canon de la flak allemand WW2 et obus pour diorama et lego.
V2 VERSION OUT NOW! Introduction Inspired by muzzle mounted rifle grenade launchers and wondering why Sillybutts didn't design one i have made a muzzle mounted holder for Sillyshells that uses the collet sytem of Silly's Spigot SCAR and…
These shells are specifically made for the Yeeeeethammer , and more specifically the full length K25 version. They also work incredibly well with the Anemone . In the search for a silly shell the Yeeeeethammer can't shoot, I made these,…
These shells were designed to fit around the soft tubing in my PC loop and give the soft tubing a rigid look. The benefit of rigid PC pipes is that they just look really nice. The benefit of flexible tubing is that you can move parts to…
Couldn't leave the old version alone. First thing I did is make a groove to slot in the cut-off muzzle from the old barrel into the new barrel. now no gaping hole in the front! Looks smooth! NICE. I moved the breech a little closer to the…
Want to reload your Breacher like John Wick? This SillyShell Caddie can hold 2 or 4 shells on anywhere you want. Using Chance's Midlock system Hardware: 2 or 4 x M3 Heat Set Inserts (I used M3*5.5*5 ) 2 or 4 x M3*10-12 Print Orientation:…
This shell allows you to fire 2 shots of 3 short darts from Nerf Shellstrike without reloading between. This concept is the same as the 16-shot in-line hammershot cylinder by hitchhiker4200 . The front dart creates a seal with the barrel…
Silly Shells won't feed properly in magazines if the dart heads stick out past the rim of the shell. Cutting an MXL down to 63mm cuts the foam into two even halves. The 63mm dart sits about a quarter inch below the shell's rim and the…
Just a tiny cylinder that I flared out at the bottom to give the signature shotgun shell shape. Did a color change after a couple layers to make it look more realistic. Again, print at 103%-105% for best results. I designed the bottom of…
I have three SledgeFires. The first two I cut up and modded, and the third i found in the thrift store with TWO ORIGINAL SHELLS. I want to keep this one stock… But that empty slot in the stock shell storage made me anxious. I tried the…
Theses spare shells it the “Nerf” shotgun currently sold at B&M in the uk, with wich you get 6 shells that eject with force and are easily lost when playing with the blaster. Might fit the Tolov Zerky blaster out of amazon, but i havent…
I redesigned the left side of Desteiner shotgun to hold the 4 shells. On the left side. The original MMU printed shell broke after a few uses. I made an 2 piece shell design for easy printing and mounting. (It involves glue this time) And…
A really simple holder accessory for (Flypoint/ Kirin) shells and also Ultra Darts (they don't get squeezed). It attaches on picatinny, available in two length. I may had more options in the future. You need a 3mm elastic string, or any…
Yep, I haven't taken the time to learn a proper modeling program, but I'm really good at measuring things, combining shapes, and doing order of operations. These are alternate Super Shell models that will print faster and use less…
silly shell holder for 3 shells for picatinny uses m4 screws x 30mm and m4 nuts
Even more silly shell variants with different dart arrangements to get varied spread. Funky Shell Lite uses Sillybutts' original rival shell instead of donutcats' to get a tighter seal and reduce the number of rival rounds behind the half…
Hey there Tribe, We made this in case you ever wanted to pose with a reload for your warhammer 40k cosplay, also great for the Space marine figures from Todd McFarland. Here is our Sunlu Affiliate link…
V2 of my inline silly shell I revamped my inline 3 to inline 6 New shells use max breachload size shell template. Old shell are only compatible with wildstyle like shell carriage, V2 should work with breach load blasters such as the…
Hasbruh decided one of the coolest blasters they ever released gets to come with a measly 4 shells, and I took that personally (actually a friend did, but details). Well now you can properly load up for a round of shenanigans with…
Turn your Airsoft 40mm into a actually usable Airsoft Shotgun by using APS CO2 Shells. Also carry ten times the ammo for the same weight. Just click it in and you are ready to go…… …..well you might need to modify and extend the valve…
Just some redesigned Dart Shells and a Heat Shield for the shown Off Brand Double Barrel Blaster.
A collection of ZSA Navigator shells to use with your Moonlander! First, choose whether you want the thumb shell or the side shell, and what side you want it to be on. Get that STL, then grab the opposite-side wedge STL to make sure both…
The shells for the stress shot are pretty easy to lose so I made some to print. Happy Printing!
Single shot version of https://www.thingiverse.com/thing:4590104 Once again tested only in 715 version, shell SHOULD fit other version, clip fits only 715 version. In my 715 2,5" 2.6mm version gives same power as stock full power brass…
PLEASE USE THE V2 - IT IS SO MUCH BETTER Extended the silly shell and put the inline clip inside it I made a inline 3 to inline 6 inline 6 shell is smaller then 256mm was made in Bambu studio
Made a single shot nerf shell and a MEGA shell for the SledgeFire using the “original” look of the stock shell. I would suggest NOT using the MEGA one if your SledgeFire still has the shell ejecting thingie in the barrel. It does get in…
I made some 8 gauge shells for my other model of a double barrel shotgun , i started making some reallistic shells a quicly descend in crazy looking futoristic designs. Since i uploaded .step and .obj files its probably really easy to…
Hey there Tribe Here we have a Prop Bolt pistol magazine with Inquisitor Logo and Bolt shell, a great prop to go with our Jupiter Pattern Bolt Pistol. We hope you enjoy Here is our Sunlu Affiliate link…
Simple stencil for painting sea shells on a surface. Dimension is arbitrary, scale it as you will but keep the same aspect ratio between x and y. Recommended thickness is around 0.4 mm and at least two layers so that the paint doesn't leak.
I call it: The Nut Master 3000 🤯 I got the idea for this design from the bird feeder cover image from the PET-Bottle Upcycling contest. Since my wife eats a lot of nuts and always needs to have 2 bowls on the table I thought this could be…
I wanted to shoot silly shells from my SledgeFire. I had to do a lot of shell cutting, but it worked, kinda. Maybe with more springpower, but it shoots Mega and 3 shot shells well. You can throw a MegaXL farther by hand, though. I made a…
An idea from MonkweyGoose to achieve a larger spread by putting rival rounds behind half length darts. Requires a chunk of power to fire. Takes 1-2 rival rounds and 2-5 half length darts.
These are printable base wads for pistol cartridge shotshells such as those using these shot caps: I tried these as an experiment to avoid the tedium of punching and setting heavy cardstock wads. They actually seem to work just fine, and…
Will fit Sniclo MIXGO Chassis. Could printed with PLA, better to use 0.2 nozzle. Can be painted with Paint Markers. Made to be crashed in drift instead of the original metallic body shell. Full video:
Various shells that I thought of while making the Sniper barrel. Short rival and slugs are about the length of 40mm. Regular slug shells require tubing listed in the name of the file. Can't test these as I don't have any blasters that can…
The latest update as of today, 06/30/25, I've slightly modified and uploaded a new front bottom section for the model to better fit the cable version of the mouse! Version 2.0 of the Rhino Beetle mouse is now up! Also, the back section is…
just some shells I designed that are compatible with the Nerf Rebel Ops Doomcannon. Standard Front Loading Shell (no Dart Post) Rear Loading Shell (mainly for HalfDarts) experimental Halfdart Front Loading Shell - not tested yet…
If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy!
A basic cannon shell and Sabot round (for a bit of fun) to fit the Nerf Alcohol Cannon I used no supports and 25% infill which seemed to work the best for a balance between range and impact power
This is a modification of the original Mr Baddeley files. Due to the larger size of the 150W electric drive, some modification to the shell and battery boxes have to be made to make it fit. I also added rails for mounting a specific…
This is a replacement cylinder and shells for the boomdozer that allows you to mix and match ammo as well as reload a number of shells for quick reloads. It uses a twist lock and magnets to keep the shells in the cylinder you need #6…
Update: Added a new shell type, called the 4-Boom. I found that a small sized shell could be made to accept a MXL dart. This shell type is almost exactly the size and proportions of the real-steel 4-Bore cartridge. These are a collection…
Rotating Easter egg fidget with 7 shells like rotating rings. Because of his egg shape the egg spins in one axis not in any like the rings. Best to print in silk PLA. Collection https://www.printables.com/@yahbluez/collections/417563
This one of my older designs where I used four 12gauge shotgun shells for holding pens. The shells are inserted in the top pice ("Shellholder") and this then slides into the baseplate. Please consider a small contribution to my Paypal. It…
These are #10 percussion cap shells, will need to load these with a primer compound. This will print a set of 25 caps, the printer settings, best to use a speed 30 mm/s and on a raft for adhesion to the printer. Print them out, allow to…
Hello Tribe, As King's day soon approaches we felt it fun, to design our own basic bolter shell prop. We hope you enjoy. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on…
These are modified silly shells that have the Stagecoach style of engravings on them. I essentially took the original silly shell files and added the engravings, and moved the label ("Elite 3x", “MEGA”, “MXL”) up a bit to make room. .3mf…
These are my remix of the Spring Thunder shells. I have added slots in the sides of them in order to help with seam placement, which I personally find makes them a tad more consistent across the board. The barrel of the 3x rival shell has…
A box I made to store up to 9 sillyshells , these wont take any of the larger variations. I may make a larger version to fit 15, if this design does well. Everything is in print orientation, and a piece of filament is used as a hinge. No…
Having problems with the lid switch not engaging on your PS1? This may help. Print it out and add to the lid switch for some extra length to help engage the switch. This is meant to be a friction fit. If it does not fit yours just scale…
25 round holder for 20 gage shotgun shells
Here's a collection of silly silly shells I came up with, with more probably coming in the future. U turn shell: The dart can ONLY be loaded in the "Front" (non blaster) end of the shell, putting a dart in the backside will probably just…
Here is a Dart shell replacement for this Nerf sniper rifle Blaster. These have a 13mm ID for easy loading. Bonus! There are some Pegs that allow the reloading box thing to fully seat half darts. You will need 2 of the pegs with holes and…
These are Monkey Ball Banana Shell models derived from 3D scans of original parts. They are designed to be 1:1, and will be updated accordingly should variance between original parts and these models are found. The parts are optimized for…
