1:8 RC Car Shock Stand Refill Jig for Arrma
Use this jig to hold the shocks of your 1:8 RC Car while you refill them and let the bubbles rise :-)
- Downloads
- 390
- Likes
- 62
- Rating
- 5
1,230 models
Use this jig to hold the shocks of your 1:8 RC Car while you refill them and let the bubbles rise :-)
Bobble the head of your favorite Decepticon Military Operations Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with…
I wanted to modify how the rear of my Sakura D6 shock mounted - I wanted the mount lower and extended - so created this file! Printed in PLA with 50% infill works great. The lower screw hole is tight - but it will get there. Two files are…
Here are the settings I've used on my Ender 3 with Prusa Slic3r: 0.16 layer height - makes it stronger and nicer; organic support material for the hooks - you could also use grid, doesn't change much; grid infill 15% - any pattern could…
3D model dimensions: washer 20mm, washer height 1mm, seat 16.5mm, plug height 6mm, recommended plastic PETG
Adaptor for smaller shocks - example you need to print from ludog's 1/8th 1/10th offroad RC shock stand : foot 2x side Print settings: Anything you like. I have used 0.8 nozzle with 0.4 layer height - Prusament PETG Supports: No
Meet the 30mm CO₂ Fun Grenade – where creativity meets excitement! Designed to turn engineering into play, this 3D-printed grenade (PLA, or any lightweight material you prefer) is made to look awesome, feel cool in your hands, and deliver…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you RC T98 Land Rover Defender shock absorber support. Raises the car by at least 10mm!!!...the lift is really noticeable and the car is also more stable. It…
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
For mounting the Brace on the chassis you have to use the two suplied M3*10mm countersunkscrews from the shock tower and two additonal M3*6mm countersunkscrews to mount the brace onto the shocktower.
Nerf Barrel Spacer made to go in the Cycloneshock barrel around 17/32 brass tube.
This adapter allows a high-capacity battery, such as f.e. Li-Poly 4000 mAh, to be connected to a DualShock 4 controller. The high-capacity battery provides extended gameplay for several days. Since the battery cannot fit inside the…
Single-handedly the best DualShock adapter! The thumbstick is controller by moving the whole controller. Rest the controller on your lap or the table, and move it around. Its motions are transmitted to the thumbstick. There is a 4-to-1…
Updated to V3. I added the pegs from my SNES Skadis mount that I designed from scratch that adds a third centered peg underneath the top 2 for extra support. It should feel much more secure.…
3D Scan of the Sony Dualshock 4 Game Controller
remix of suprised halloween ghost
Shock Cord Scope/Light Cover "by" Qwerm A shock cord retained cap for your light or scope based off of One Hundred Concept's ScopeCap/LightCap/ShockCollar. Included in the release are various sizes ranging from 30-70mm in 2mm increments…
Milwaukee Shockwave box V 2 Added Chamfer to the ends V 3 Shortened the arms for a tighter fit V4 6 mm hole V5 6,1mm slotted holes for div pegboards
A universal smartphone mount for DUALSHOCK 4 (PS4 controller) I made Any modern smartphone can be held securely using a screw mechanism fully printed needs support structures The joints can be attached with 1.75 filament
Created via modification of original 'dualshock 4' design by Saba.Lanchava found on his sketchfab page ( https://sketchfab.com/Saba.Lanchava ). All support & credit should be directed towards the orignial designer Saba I simply deleted…
Remixed this to make it a double Controller stand for Dual Shock 3 Playstation controller stand
Mascaras de Lock, Shock y Barrel
Specs: These are high poly scans, the average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of the object then the scan will contain 'Blobs' in those areas. These scans…
Remix of the " PS4 Controller Stand ". I wanted a more stable base so changed the rounded front. The one I printed has the icon at top, but I made a version where the icon is centered. The one I printed also got a rounded slope on top,…
One of the triggers was broken on my PS4 controller, and I decided to 3D model some new ones instead of replacing them with generic replacements. These are flat replacement L2 and R2 buttons for the first gen PS4 controller (CUH-ZCT1).…
Inspired by a design from Nicholas Piegdon: https://www.youtube.com/watch?v=8qTx_9HK7IM Used 3D scans from: https://bitbuilt.net/forums/index.php?threads/ps2-dual-shock-2-controller-scan.5088/
8 Vigor bottles from BioShock Infinite
Two sided and keyhole versions available. A modified version of the Xbox controller wall mount . For best strength and quality, print sideways. Dualsense PS5 Xbox (One + Series X/S) Xbox Elite Series 2 (Coming soon, premium)
One part, sculpted from scratch. Suupport intensive. Category: Sculptures
A 3D printable watch stand for Casio G-Shock watches and the like. It's easy to print and holds the watch securely. Features The watch stand takes inspiration from the existing model made by Alby312 . Starting from scratch I made mine…
A NERF silencer modeled for my son's Elite 2.0. It can probably fit other models. It should be printed as it comes without support.
Simple wall mount for Dualshock 4 controller. uses only one screw as I was hesitant to drill more than required. Turns out that one screw is more than enough. Step and Fusion 360 files available for you to modify! Support You can support…
Can be used as an AirTag Keychain or a luggage tag. The design is shock resistant and durable
This is an 8 piece Gridfinity set for organizing the Milwaukee Shockwave impact socket set. It may or may not fit other brands of sockets.
Just print in whatever filament you want and prefer. Can be printed without supports easely.
One of my first projects is this PS3 controller stand with the function of storing your UBS cable as well… Eines meiner ersten Projekte ist dieser Ständer für PS3 Controller mit dem sich auch das USB Kabel verstauen lässt…
I created this for my Playstation 2 controllers. It is completely printable without supports and in one piece. And keeps the cables nice and tidy behind the controller itself. I believe the original playstation Duel Shock Controllers are…
I recommend to print this standing on one surface at the Bottom like one of the pictures show. It might work best if the inner gap is facing upwards. I printed mine on an Ender 3 S1 with - Fillamentum Wizards Voodoo PLA - 210°C - 0,08mm…
3 Pieces... Actuator prints in place but flip it upside down! Spring should print fine but some people have messaged me saying they needed a raft Threaded cap.
This manly pen holder is perfect for adding a touch of ruggedness to your desk. Its unique design in the shape of a spring adds a stylish touch while providing a practical function to hold your pens. It's also ideal for dual-color…
DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…
I modified my original Generic Streaming Microphone Shock Mount Reference to improve its printability. Try it for yourself and throw a like if you think it will work well for you. Changes include: Tapered posts, holes, and elastic slots…
Protect you KTM rear shock from being worn out by the rear wheel mudguard. I printed it in PETG with 90% and 100% infill. Fit is not 100%, but you should hear it snap when it fits correctly. Lasts probably 10-20h. Maybe more, but I…
Holder inserts for the Milwaukee Shockwave case for 1/4" hex shank 1" long bits. Bits are held in magnetically. The Milwaukee Shockwave case (large version) has a modular design that allows you to use different types of holder inserts.…
A remix of a remix This is made to fit mil spec buffer tubes but the original 5/16 bolt is just too large and loose for my needs, So I added a insert to make the screw size smaller to M6 which is better fitting for the tube and double the…
A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…
Welcome! The Fifne AM8T mic is a great budget option. I've been using mine for a while, and at the 60 USD price point with a boom arm, is a really good budget option. But one thing was wrong with it, no shock mount. The mic is connected…
I designed these and have been using them in my shock since 2021 without issue. Print with 100% infill, you want to maximize the volume of plastic and avoid any hollow cavities in the printed part. I recommend a high-temperature material…
Overview Traveler, beware the crossroad - for HECATE draws near! The Hecate mod converts the Nerf Bigshock into a four-shot inline clip blaster that loads from the rear! This uses half-length short darts, and can achieve a performance of…
It took me some trial & error to come up with this. It is most certainly not final because I need to tune it with the weight of the car. When loaded it should be partially compressed leaving some room for more compression and also some…
Remix of shockwave box holder so it will attach to wall control pegboard system. Added countersunk holes to fit flat head screws.
Copy of the original OPSol adapter for Mossberg shotguns. Adapter allows use of 12ga 1.75″ Birdshot, Buckshot, and Slug Shells Only fits: 12ga Mossberg® 500, 500A, 590, 590A1, and Maverick® 88 models, and the 12ga Shockwave Firearm Should…
Holds Milwaukee Shockwave boxes. Holes widened to fit Multiboard small threads, and lengthened to clear snaps.
The default holders for this set aren’t very good, so I made new ones You can also stack all the bits on one side, which leaves room for other bits on the right. I also included a version with the ½" bit holder in place of one of the 1/8"…
This disc is modeled off of the Axiom Paradox. (5/4/-4/0) At the moment I've only got one to print okay-ish on my printer and it flew very similar to the Paradox. Flippy but not too flippy. Still a work in progress but print it and give…
This is a remix of an old injection moulded model I found. I printed in ABS for strength and environmental resilience, but would probably work with PLA, PETG, etc… The bungee/shock cord goes through the hole at the back and is pushed down…
The original solid rubber recoil pad on the Remington 870 does somewhat reduce recoil simply because of its weight. It is, however, hard as a rock, and only gets harder as the rubber ages. This shock absorbing recoil pad for Remington 870…
These are flat replacement L1 and R1 buttons for the first gen PS4 controller (CUH-ZCT1). The buttons are not modeled to be exact replacements, they are flat and chamfered on the front, both as I wanted something that was a bit nicer to…
English Simple mount for dual shock or PS4 controllers to put under your gaming desk, or your coffe table. It uses its joysticks as a holding points. Used to hold one controler at a time. To be hones Iam not sure if this may damage the…
Basicaly an overengineered PS4 controller stand Derived from a 3D scan - https://www.printables.com/model/125924-sony-dualshock-4-3d-scan/remixes - Thank you I provided a full stand file so the optimised one can be used as a mesh modifier…
Not my design, This was downloaded from thingiverse. Credit to: Paga777i Works great. good viewing angle, feels solid once clipped in and no movement or sliding around. printed in just over 5 hours, used bed supports only and all removed…
I discovered the RC Shock shaft pliers, designed by Luisom77 and printed it out. ( https://www.thingiverse.com/thing:4418072 ) I did so in PETG and regular infill. The pliers functioned OK, untill I needed them for something witch…
Gridfinity Stand for Dual Shock (PS4) Controller like https://www.printables.com/de/model/708470-gridfinity-ps5-duals or https://www.printables.com/de/model/708458-gridfinity-minimalistic-xbox-controller-stand
Neue Version verfügbar! / New version available! - Verbessertes design, schneller gedruckt, weniger Filament und Schrauben nötig. Improved design, less printing time, less filament required and fewer screws needed.…
An isolating shock mount for the miniDSP UMIK-1 measurement microphone. The mount is intended to be installed on a monopod, tripod or selfie stick with a ¼" or 3/8" screw. It isolates the microphone from a broad range of vibrations, which…
Shockbottle hundo case gauge filler. This is for 9 and I have included the fusion 360 file if you would like to change anything.
This is a version of my design for AA batteries, available here . It features two improvements to the AA casing: a slightly higher resilient element and a single hole instead one of the the grooves on the negative side. A battery box…
28/02/24: Found a bug ! You need to use the new files… I also improved the overall rigidity by adding a PLA slide. TPU spring printing: I'm providing a “color change” in the print file; start with PLA (less than 1 mn) then put TPU. This…
Wheel wells for FCX 18 - you'll need to perform a cut in the slicer and orient the flat parts to the build plate. Shock Keys, Rear keys are in 2 parts to make it easier to print. Front Shock keys I got lazy, just print the side with the…
This shock absorber is compatible to the common Lego axles. The sliding piece is put on the axle together with the pressure springs and blocked at the top. There are two versions, each with a hole at the top and an axle cross at the…
2024-FEB-7: Lost track of my files a bit, but uploaded several I had in the mix over the last week… the V2 design is stronger and does not have the flanges on each end. *** Iterated a bunch to get a minimal design that is still strong…
TRX4 shock towers works with original accessories
made this for my son to play with come nice together if the 2 disc is printet in propper tolerances ITS A REMIX OF www.thingiverse.com/thing:3882003 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
Wall mountable PS4 DualShock controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) This has 2 pieces that must be printed and…
Summary Socket head screw M4x40 or M4x45 -> shorten the hexagon socket screw Front spring -> 0.8x12x40 mm -> is also working for the rear -> more spacers needed Rear spring -> 1.0x12x40 mm I used three spacers for the rear and one for the…
does not fit the DW-5600 and similar as the buttons on the module are much closer together.
This is a USB cable guard for Sony PlayStation Dualshock 4 that clips onto the controller. It is designed to hold original PlayStation 4 microUSB cable firmly when it's connected to Dualshock 4. This removes strain from microUSB port and…
Hi, It is my idea for shock-absorbing landing gear for quadcopter with F450 frame. 2 legs on opposite sides should be connected some kind of elastic cord, spring or maybe strong rubber band. It should absorb some of impact of hard…
(PS4) Playstation 4 dual shock controller holder for honeycomb wall with gamging sign on front of the holder. Slight modification of model which i cant find right now.
Replacement shock-cord hooks from a tent-fly. Printed in yellow so they don't get lost like the originals! Original in black, prints in yellow. Hooks are just over 37mm long and 19.5mm at the widest part, 4mm thick. You should be able to…
Fixed up all the missing mesh from original files. body is in the zip folder because the file was too large. Category: Video Games
There are two versions of this model, the main version which is slightly larger than a SNES box and can accommodate a game and the manual, and a smaller version that will only hold the game and is the same size as a Sega Genesis style…
This is a photogrammetry 3D scan I found by 3Digify, software that used cameras to construct a mesh (doesn't exist anymore). I smoothed the mesh and gave the feet flat planes so it will hopefully stand better. I also added a colored mesh…
This is an 8mm tall spring preload spacer, designed for any traxxas vehicle with shocks that use preload spacers on the springs. These snap over the shock cylinder, to increase the preload. Very simple to scale to various thicknesses.…
I didn't have any car parts such as shocks, differential and ESC and I didn't spend so much on that. Then I designed rubber band shocks and surprisedly worked well. It provides adjustability for front and back separately with using…
I saw a similar watch stand on thingiverse Watch Stand for 22mm Straps. by lemonstick - Thingiverse I wanted a GShock logo so used measurements and modeled from scratch in Fusion 360, including the logo. Enjoy.
This shock is designed to be fully 3d Printed. All pieces minus the two TPU Gaskets and spring are meant to be printed from PLA. The Spring is designed to be printed from PETG. This print does require a good and finely tuned 3D Printed as…
PS3 Dual Shock Controller Triple Stand ! Added a 3rd stand for 3x PS3 controllers. Remix of the double stand from @gavin : https://www.printables.com/model/474383-ps3-dual-shock-controller-double-stand Check my profile to see other models…
2 diferent modules Remixed from a screw holder
Rear shock tower for mjx hyper go print at 100% Infill, pla should be fine the holes for the upper suspension arm screws might need drilling out to 2.5mm after printing this was a requested part by @SamHammes_1124827 here on printables I…
Model was ripped from Fortnite using the Fortnite Porting tool for Blender and modified slightly with meshmixer and a few other programs to get to a printable state. https://github.com/halfuwu/FortnitePorting Included are two versions,…
If you want to use Losi Mini-T springs on your Traxxas TRX4 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…
This is a Nato strap adapter for my Casio G-Shock GW-M5610 for 22mm Nato straps. I printed the adapter with flexiple filament to make it more robust and more comfortable to wear. Polyflex Filament from Polymaker matches the look and feel…
Got a returned/broken RC car from a bin store. This is an MJX 1:16 scale Hyper Go buggy. The shocks tower (connects front shocks to frame) was broken. I printed a crude one from a not-to-be-mentioned printable model website, but wanted to…
Spring is splitted in two parts (easier to print)
This model is compatible with the lego system.
UPDATE jan, 1st 2024: I made a much better Shock Stand: You might want to try this one in stead: https://www.printables.com/model/694740-updated-18th-110th-offroad-rc-shock-stand *********************************** I went from 1/10th to…