Search results: sidemount

Sort order

77 models

P
PrintablesAdrenaline

Ender 3 Spool holder sidemount

Spool holder for the Ender 3 Extrusion that attaches to the side of the extrusion - to make space for a cable chain for example. It uses the screws & t-nuts from the Ender 3 spool mount - no additional screws required. I included the…

Downloads
3,609
Likes
362
Rating
4.91
P
PrintablesBasementGremlin

Creality K1C Sidemount Spoolholder

Introduction: This is a redesign of the spoolholder for the Creality K1C that creality provides. This design innately uses more walls and less infill. This provides better strength and uses the same amount of material as the original one.…

Downloads
634
Likes
60
Rating
5
P
PrintablesM K

M-lok Gopro Adapter Sidemount

Remixed the Adapter to fit M-Lok system

Downloads
375
Likes
36
Rating
0
P
PrintablesAlex B

AnkerMake M5 Dual 4020 sidemount part cooler ducts

Update: Revision 8 - (R8/R8-Solid model in printable files): Hex edge thickness increased to improve stability and printability Solid version included (easier to print than hex, slightly heavier) Slightly adjusted vent angles. Improved…

Downloads
351
Likes
63
Rating
4
P
Printablesprintotter

PivotPrint - An outsidemounted hinge for small doors

Description An outside hinge for you to use. This is meant to be mounted on the outside of a cabinet. There is a left side hinge set and a right side hinge set. Print Instructions Since it needs to take some weight I suggest printing in…

Downloads
312
Likes
154
Rating
0
P
PrintablesLaisch

LPSH - Low Profile Spoolholder (sidemounted for AMS)

Low Profile Spoolholder for sidemounting to the bambulab AMS. With the bowdenconnector it adds just 34mm to the AMS in width. Fits spools from 140 to 200mm diameter. Never unplug the AMS again when printing from an external spool.…

Downloads
257
Likes
199
Rating
4.4
P
PrintablesDom360

G3 Flex sidemount - Ubiquiti Unifi

PETG or ABS recommended for outdoor application. Mount the unifi with the cable coming out the side

Downloads
252
Likes
27
Rating
0
P
Printablesm4x1m

Sidemount break away connector

When sidemount one usually applies a break away connector made out of a self locking cable zip tie and a piece of rubber o-ring to ensure that the redactor can be handed over quickly in an out-of-air situation. Although this is a very…

Downloads
223
Likes
16
Rating
5
P
PrintablesCM Modellbau

Picatinny rail sidemount for Steambow Stinger 2

The 75mm long picatinny rail (dimensions according MIL-STD-1913) is 15mm high to fit on the side of the Stinger 2 magazine body. This height is ideal to fit the arrow quiver right next to the magazine for quick reloading. The 40mm hole…

Downloads
192
Likes
20
Rating
0
P
PrintablesStiebl

BTT E3EZ case for sidemount

Wanted a side mounted case for the E3EZ with enough free space for cable management. Added the logo from here: https://www.printables.com/de/model/500230-bigtreetech-manta-logo Printed in PETG with 4 walls and 15% infill. For mcu fan a…

Downloads
182
Likes
21
Rating
0
P
PrintablesF3Drid

ESP32 camera case - Antenna sidemount

Use the thin nut that comes with the antenna to pull the lower hex part into its place (3rd picture). Printed it with PET-G, 0,2 mm layer height, 15% infill. You will need to push the grate aside a bit with a screwdriver or something to…

Downloads
180
Likes
17
Rating
4.8
P
PrintablesBasementGremlin

BTT SFS 1.0 Sidemount for the Creality K1/K1C

Introduction This is a sidemount for the BTT SFS 1.0 that works for the Creality K1/K1C and moves the sensor to a more accessible position to the side of the printer. With the new smart filament sensor you can detect clogs and prevent…

Downloads
176
Likes
17
Rating
5
P
PrintablesDrexore

X1C Sidemounted Spoolholder AMS (remixed for Creality 3D Digital Spool)

This is a quick remix which rotates the locator pins 90 degrees

Downloads
150
Likes
32
Rating
5
P
PrintablesJoesy5

Sovol Zero Sidemount Spoolholder

This Sidemount uses the original sovol Spoolholder to relocate the spool to the front right side of the printer. There is also a version for M3 heatinserts. It fits on the Zero's 152x152 buildplate if rotated 45°. To mount, remove the…

Downloads
147
Likes
32
Rating
5
P
Printablesm4x1m

Sidemount diving - break away connector for 2nd stage reg

In sidemount diving, we attach the long hose's second stage regulator to the right shoulder D-ring using a small snap-bolt. Relying on permanent fixtures such as nylon lines would deprive the diver from detaching the long hose fast when…

Downloads
146
Likes
9
Rating
0
P
PrintablesNeonLabs

Ender 3 Sidemount Spool Holder

Loved Adrenaline's design of the side mount spool holder but for my application I couldn't get it to fit in solidly enough in the channels to be stable so I redesigned it to accept some socket head screws and channel nuts. Required: M3 x…

Downloads
141
Likes
14
Rating
5
P
Printablesgodstone

Sidemount breakaway connector clip

This is a Breakaway Connector used for the longhose when sidemount diving. Attach a boltsnap and clip it onto the hose-c

Downloads
138
Likes
11
Rating
1
P
PrintablesMaximus Printus

Quick Release Buckle BCD/Tec/Sidemount Harness

A quick release buckle for your BCD or Tec/Sidemount Harness. This buckle offers a low-profile design that reduces bulk while maximizing security. It’s precise locking mechanism ensures that once you’re clipped in, you stay in, making it…

Downloads
133
Likes
44
Rating
5
P
PrintablesCrapUsername

X1C Sleek Sidemounted Spool Holder

My old ender 3 s1 had a much better spool holder than the x1c weirdly enough, so i decided to use the roller from that machine and add it to the x1c. Also mounted sideways cause it's objectively better.

Downloads
133
Likes
23
Rating
5
P
PrintablesStefan

Sidemount diving long hose clip

This clip holds your regulator securely to your harness when not in use for breathing. In an emergency, you can simply pull the regulator off without fumbling or breaking anything. To have the right amount of pull off force I used this…

Downloads
116
Likes
16
Rating
4
P
PrintablesLeo

X1C sidemounted Spoolholder AMS-Remix (Ender3S1 Roller necessary)

This sidemounted Spoolholder for the Bambulab X1C is remixed for Compatibility with an AMS. It uses the original mounting Hardware, as well as the Spool Roller of an Ender 3 S1/S1 Pro. I added a cutout for the AMS connector cable, as I…

Downloads
107
Likes
17
Rating
0
P
PrintablesMiko

SHH Thorn 4080 sidemount

Sidemount for SHH Thorn. Uses 6 or 8 m4x8mm screws for shifter side and 2 m8x16mm for rig side.

Downloads
105
Likes
10
Rating
0
P
PrintablesLukas

CCR Liberty SideMount Counterlungs Dryer (by Proteo Explorer Team)

Original Upload by https://www.thingiverse.com/_iw0gz_ A project of the Proteo Explorer Team https://www.facebook.com/proteoteam/ CCR Liberty SideMount Counterlungs Dryer Additional parts required are: 40mm Fan (std 40mm) - USB driven…

Downloads
89
Likes
7
Rating
5
P
PrintablesGiddy1

Ender 3 V3 CoreXZ filament sensor sidemount mod

Shout out to Ernesto Pineda for his original design which is a simple fix to the CoreXZ filament tangle issue, without throwing extra weight on the gantry. Original design can be found on Printables at…

Downloads
77
Likes
7
Rating
5
P
Printablesemcee_nars

K1 Sidemount Gluestick and Scraper holder

It is what the rest said. Got tired of misplacing the gluestick and scraper. Remixed a runout sensor to not lose them again. Mounted with m3x12 screws, with 2 m3x7x1mm washers. Yeah can use 10mm screws, but one didn't wanna screw in right…

Downloads
73
Likes
14
Rating
0
P
Printablesgartnix

Ender 3 Filament Spool Holder Adapter Sidemount v01

M5 10mm bolt x 2 M5 T nut x 2 M5 8mm bolt x 2 M5 hex nut x 2 Category: 3D Printer Parts

Downloads
66
Likes
9
Rating
0
P
Printableswbsp

Sidemount PSU and Wire Channels for (Un)Original Prusa Drybox

The stls are organized below in what you will need for a left vs right mounting. You will need to drill a small hole in the plexiglass sidewall where you choose to mount the PSU. The updated screw lengths going through the wire channels…

Downloads
60
Likes
15
Rating
0
P
PrintablesVoltex

XT60 FPV Sidemount 20mm (for IFlight SL5 V2.1)

Simple Sidemount for the IFlight SL5 V2.1 Frame, all Revisions as of Upload Date. Can be used on any Frame with 20mm Standoffs. I recommend routing the Power Cables infront of the Standoff so it gets pulled inwards by the power cables.…

Downloads
56
Likes
10
Rating
0
P
PrintablessiManthrop

Prusa mk3 LCD Sidemount

Sidemount for LCD Display of a Prusa I3 MK3s+ More Space in the Frontend and better Handling. Required parts: 2x M3x12 2x M3x16 2x M3 nuts

Downloads
56
Likes
10
Rating
0
P
Printablesjan.michael

Sidemount break away connector strong

Remix of the 71828-sidemount-break-away-connector. As it was too weak to hold my tube, I enforced the design to increased the grip of the spare respirator. Printed with Mini+ Infill: 50% Eryone TPU

Downloads
55
Likes
7
Rating
0
P
Printablesandy

JGAurora A5 3D-Touch sidemount

This thing allows to mount a 3D-Touch bed leveling sensor to the side of the printhead. It fixes two major issues I had with other mounts: It does not collide with the frame when moving the Z-gantry all the way up. It avoids long levers…

Downloads
51
Likes
5
Rating
0
P
PrintablesPAPHOTOGRAPHY

Philips Hue sidemounted rack holder

Holder to mount a Philips hue bridge in a network rack mount (sideways).

Downloads
51
Likes
8
Rating
0
P
PrintablesJoopKarelSpank

Makita 18V sidemounted bitholder no magnets

Print this bitholder with TPU stock settings prefferably pretty light on the number off walls and infill. you can mount it to the side using an 4mm hex bolt with a cilinder head on it. Does not fit both sides but you can mirror it if you…

Downloads
50
Likes
3
Rating
0
P
PrintablesERKARK

Hero Me 7 Bondtech BMG sidemount

There's not any side way mount for BMG. The normal rear mount did not have enough clearance for CR-10 chassis and front mount is a pain to dissemble without removing the whole printer from enclosure. Side way mount it is.

Downloads
39
Likes
4
Rating
5
P

Divesoft Freedom Loop Hanger (Sidemount CCR) – Drying / Storage Hook

Divesoft Freedom Loop Hanger (Sidemount CCR) This hanger is designed to hold the Divesoft Freedom breathing loop for drying, storage, and display . After a dive, hang the loop so water can drain and the loop doesn’t end up kinked,…

Downloads
38
Likes
5
Rating
0
P
PrintablesHaitonno

RV / Camper Tablefoot sidemount

Printed in ABS with no Support and 70% Infill

Downloads
38
Likes
14
Rating
0
P
PrintablesYannick Swinnen

Prusa XL Buddy3DCam Sidemount

This Buddycam mount can just be clicked over the left or right top extrusion endings and has 4 screwholes for mounting the twist locking disk onto it. Apparently also compatible with Google Nest 2nd Gen indoor camera's, they have the same…

Downloads
36
Likes
6
Rating
0
P
Printablesboltsnap

Sidemount bungee pull tab

This is a pull tab that can be threaded through a 6mm bungee for assisting in pulling the bungees over your sidemount tank valves when using bulky dry gloves Printing Instructions Filament: TPU 95A Infill: 100% Support: None Brim: None

Downloads
34
Likes
5
Rating
5
P
PrintablesCausality

Flashforge AD5M Pro Multiboard Sidemount

I wanted to have a changeable tool tray option and had a first stab at Tinkercad. I ended up liking the outcome more than I thought, so maybe someone else likes it too and wants to save some time designing it manually. The model is 160mm…

Downloads
29
Likes
6
Rating
0
P
PrintablesMrHutchy01

SV06plus and SV01 sidemount

I printed the original but found it flexed too much under hand when being pressed, so I added a couple of support pillars to give rigidity. Prints nicely with 30% infill and will need supports. Align short end towards the bed.

Downloads
28
Likes
3
Rating
5
P
Printablescrashkg

Sidemount Drybox Stand for Prusa XL

The XL does not like filament unless it is super dry. Leaving the spools exposed on the side while you print is not a good way to get successful prints, so I made this attachment for Dry Boxes. Print with the magnet side down. Use Snug…

Downloads
27
Likes
8
Rating
0
P
Printablesalcyone

Meade ETX-90 Finder Scope Angled Sidemount

One of the frequent complaints about the Meade ETX series is that the finder scopes are virtually impossible to use because of how close the standard mount is to the eyepiece and the barrel of the scope. This mount fixes that. First,…

Downloads
23
Likes
1
Rating
0
P
PrintablesJPN_FI

Ender 3 Spool holder sidemount (wider)

This one has a bit wider 4040 foot than the original one for the extra stability. Category: 3D Printer Parts

Downloads
23
Likes
1
Rating
0
P
Printablesarminth

Osoyoo 5" portrait sidemount for Ender 3 and other 20xXX profile-printers

Simple mount for Ender 3 and other printers to hold Case for Osoyoo 5" Touch Case: https://www.printables.com/de/model/510659-case-for-osoyoo-5-touch-screen-newer-version You just nust need 2 pcs M3x6 mm screws and 2 pcs M3 T-nuts.…

Downloads
18
Likes
0
Rating
0
P
PrintablesLobotomy

Vertical Rack Sidemount

🔌 Power Rack Vertical Sidemount – Take Back Your U-Space Stop wasting precious U-slots on a clunky power strip and cable management. The Power Rack Vertical Sidemount is your solution to clean, efficient, side-mounted power and cable…

Downloads
17
Likes
2
Rating
0
P
PrintablesFaiuh

Sidemount for Ender 3 V2 Lcd Screen | Only works with elevated printer

I modeled this file, because I couldn't find anything like it. It allows you to sidemount the ender 3 v2 lcd display and uses the screws and t-nuts included with the original mount. The model might need slight support and I recommend…

Downloads
17
Likes
3
Rating
0
P
PrintablesnemediArt

Wall sidemount spool holder

A simple spool holder for wall mount.

Downloads
16
Likes
3
Rating
0
P
PrintablesFishtown

3030 Sidemount for Titan Extruder V1.1

Befestigung für den E3D Titanhextruder um ihn seitlich an einem 3030 Profil zu befestigen. V1.1: Löcher zur Befestigung verschoben, damit auch "normalgroße" Nema17 passen. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution:…

Downloads
16
Likes
1
Rating
0
P
PrintablesFelixAtter

Ender 3 sidemount spool holder improved

Extended the mounting system to reduce or eliminate twisting of the spool arm Category: 3D Printer Accessories

Downloads
16
Likes
0
Rating
0
P
PrintablesQuattrox

V-Core 3/3.1 Spoolholder Sidemount for Enclosure v1

easy and simple so that you can mount the original holder on the side of the enclosure

Downloads
16
Likes
2
Rating
0
P
PrintablesLoneLee

Filler sidemount for Ultimaker 2+

Simple mount for the ultimaker 2+. Unlike the normal mount, this can be used to install the "Filler" on the side of the ultimaker2+ enclosure.

Downloads
14
Likes
2
Rating
0
P
PrintablesJochemW

Sidemount for Philips Hue Lily spot

Sidemount for Philips Hue Lily spot.

Downloads
14
Likes
1
Rating
0

Divesoft Liberty Sidemount Short Hose Rack

A Rack to mount the Short Hose of the SM to dry after a Dive

Downloads
13
Likes
2
Rating
0
P
Printablesclogged_nozzl3

Neptune 4 UBBI sidemount filament guide

Print as oriented. Uses 2 M4x8 BHCS to mount to the extrusion Sensorless version of https://www.printables.com/model/1313705-neptune-4-ubbi-filament-guide-with-sensor Submit feature requests here!

Downloads
13
Likes
2
Rating
0
P
Printablesmazas

Mount for sidemounting a 10.9in iPad for Ratrig V-Core3 or V-Core4

A mount for using a 10.9 inch iPad at the side of a printer, including Ratrig V-Core3 and V-Core4. The mount attaches to the vertical extrusions with a single M6, and the tilt can be adjusted. As the fixing point is near the center of…

Downloads
12
Likes
1
Rating
0
P
PrintablesTholi

Sidemount Benchy Holder for PrusaXL

choose "supports everywhere" as support for the hooks mount with m4 locknuts to the profiles

Downloads
10
Likes
3
Rating
0
P
PrintablesChristian

IKEA Skids sidemounted tray

IKEA Skids sidemounted tray

Downloads
10
Likes
3
Rating
0
P
PrintablesJulian Schrader
Downloads
9
Likes
5
Rating
0
P
Printablesrotes Handy

Laserpointer holder for Creality Falcon 2 - sidemount

in my opinion this holder ( the original one) is the best one to be found in the internet ! Well done. But when I was using it, the autohoming fails when the Laserhead is too low. Reason: The holder reaches the front frame before the head…

Downloads
9
Likes
1
Rating
0
P
PrintablesVashiru

AnkerMake M5 Dual 4015 sidemount part cooler ducts

Remix of @AlexB_524533's excellent Dual 4020 fan ducts for 4015 fans. I flipped the model 90 degrees in my slicer, cut off both scoops just next to the intake and scaled that down to 75% to take it from 20mm wide to 15mm wide. Carefully…

Downloads
9
Likes
0
Rating
0
P
PrintablesSchmitt

Sidemount 8mm bungee pull tab

Original and Idea by @boltsnap_292875 - just edited for a 8mm Version. This is a pull tab that can be threaded through a 8mm bungee for assisting in pulling the bungees over your sidemount tank valves when using bulky dry gloves Printing…

Downloads
8
Likes
2
Rating
0
P
PrintablesTorben

Sidemounted trashcan (multiple sizes)

i wanted to make a trashcan for failed prints and supports that i was able to mount to the side of a cabinet or a wall. You can choose between a 15cm tall version or a 7,5mm tall version and eitehr mounting with doublesided tape or bolts…

Downloads
8
Likes
4
Rating
0
P
PrintablesBTM

Cover for AnkerMake M5 Dual 4020 sidemount part cooler ducts

Although this part isn’t strictly necessary, I wanted a cover to make my modified toolhead look more like the original. After being unable to find one already made I decided to open up Fusion and have a go myself. Since I was quite happy…

Downloads
7
Likes
2
Rating
0
P
PrintablesAxiale

ArcaSwiss SideMount for SmallRig Zv-E10 Cage

So After I bought a tripod with an arcaswiss mount, I was annoyed since my zve10 didn't have an arcaswiss mount allowing to be attached on portrait, so I remixed this thing to be screwed on the cage's sides uses 2 1/4x10 screws

Downloads
6
Likes
4
Rating
0
P
Printablesjas1217

Sovol Zero Sidemount Spoolholder - Reversed Heatset Inserts

Moved the heatset inserts to the other side to be less likely to pull out.

Downloads
5
Likes
2
Rating
0
P
PrintablesNiveQ

Fanatec DD sidemount Simhub Flag (magsafe) mount

This is my own design of a 8x8 Flag holder for Fanatec DD wheelbases. it is mounted on the sidemounting slides of the Fanatec wheelbases. it fits an 8x8 RGB matrix. there are two versions: - Clean version - Magsafe version (that requires…

Downloads
5
Likes
0
Rating
0
P
PrintablesP More

Shelf for sidemounting

A simple shelf for mounting on side of something. I put it on a cabinet in the bathroom. 180mm wide x 200mm deep.

Downloads
4
Likes
0
Rating
0
P
PrintablesNidhoeggr

Ender 3 Filament Guide for spool sidemount offset

Small Filament guide if you spool ist not directly mounted below the extruder. Based on this filament roller guide: https://www.thingiverse.com/thing:3052488 It uses the same bearing and spacers. I had to mount my spool sidemount in the…

Downloads
3
Likes
0
Rating
0
P
PrintablesNicolas

TI-99/4A Pico PEB Sidemount - SlimVersion - Redesigned with ventilation hole

Redesigned with ventilation holes and Button in option

Downloads
3
Likes
0
Rating
0
P
PrintablesTomas Woren

Google home Mini sidemount with cable mgmt EU

I wanted a mount for my Google mini that protuded as little as possible from the wall so I turned the cable management of the mount made by Carljam ( https://www.thingiverse.com/thing:3471944 ) around and placed it on the back. Then added…

Downloads
2
Likes
0
Rating
0
P
Printablesklastic

Prusa XL Sidemount Hexagon Mesh Drybox - Right

Side mounted dry box remixed using CNC Kitchen's Bump Mesh tool. 3D texture prints without supports. Prints for the right side of the Prusa XL, lid and other files for the left side can be found below. Texture can be found on…

Downloads
2
Likes
0
Rating
0
P
PrintablesDimeus

Pragma5 - Cherry II Low sidemount

Pragma5 - Cherry II Low sidemount Like a ballsack 💵 If you want custom 3d models of basically anything cheap, contact

Downloads
0
Likes
2
Rating
0
P
PrintablesDimeus

hexagonal standoff 20mm cherry II sidemount

hexagonal standoff 20mm cherry II sidemount 💵 If you want custom 3d models of basically anything cheap, contact me on discord : _dimeus

Downloads
0
Likes
2
Rating
0
P
Printables

ArcaSwiss SideMount for SmallRig Zv-E10 Cage

So After I bought a tripod with an arcaswiss mount, I was annoyed since my zve10 didn't have an arcaswiss mount allowing to be attached on portrait, so I remixed this thing to be screwed on the cage's sides uses 2 1/4x10 screws

P
Printables

Meade ETX-90 Finder Scope Angled Sidemount

One of the frequent complaints about the Meade ETX series is that the finder scopes are virtually impossible to use because of how close the standard mount is to the eyepiece and the barrel of the scope. This mount fixes that. First,…

P
Printables

Quick Release Buckle BCD/Tec/Sidemount Harness

A quick release buckle for your BCD or Tec/Sidemount Harness. This buckle offers a low-profile design that reduces bulk while maximizing security. It’s precise locking mechanism ensures that once you’re clipped in, you stay in, making it…

P
Printables

Sovol Zero Sidemount Spoolholder - Reversed Heatset Inserts

Moved the heatset inserts to the other side to be less likely to pull out.