P
PrintablesAndreas Otto
Simagic GT Neo extended Shifter Paddles
You can purchase these paddles made from carbon fibre at 3D-Simgear: SHIFTER PADDLES FÜR SIMAGIC GT NEO
- Downloads
- 133
- Likes
- 23
- Rating
- 5
Search results: simagic
200 models
P
PrintablesPaaasia
Simagic P2000 pedal covers
Simagic P2000 pedal covers If you like little wider pedals or just change the color
- Downloads
- 23
- Likes
- 7
- Rating
- 0
P
PrintablesSimps0n
Simagic/Moza Wheel Stand
I’ve designed a custom steering wheel stand to keep my collection organized and beautifully displayed. This stand allows me to neatly place my favorite steering wheels on the shelf while keeping them safe and accessible. I’ve made three…
- Downloads
- 966
- Likes
- 94
- Rating
- 5
P
PrintablesD2 Doctor
Simagic HPR Haptic Pedal Reactor mount for Moza SR-P pedals
A simple adapter to fit the Simagic HPR to Moza SR-P and possibly SR-P Lite pedals. Mounts to the back of the pedal and holds the HPR to the back. Requires 4x M4x15 countersunk screws to hold the HPR to the adapter, and 4x M4x10…
- Downloads
- 915
- Likes
- 57
- Rating
- 5
P
Printablesmikeev
Simagic P-HPR Adapters for Heusinkveld Sprint Pedals (Accelerator, Brake, Clutch)
Intro: These are adapters to mount the Simagic P-HPR (Haptic Pedals Reactor) for the Heusinkveld Sprint Pedals . All 3 pedals (clutch, brake, accelerator) are included. Models: You will notice that there are 2 models per pedal, labeled…
- Downloads
- 809
- Likes
- 40
- Rating
- 5
P
Printablesc4tkybnm
Simagic (Moza) QR 8020 simrig mount
Should work with Moza too as they use the same QR but I can't test as I don't have Moza gear.
- Downloads
- 596
- Likes
- 68
- Rating
- 5
P
Printablesbroodro0ster
Simagic Haptic Reactor (HPR) mount for Heusinkveld Sprint brake
Additional parts needed: 4 M3x12mm screws (a little bit shorter or longer should also work) Print the mount and 2x each washer. Use 3 perimeters and 25% infill. Then mount the reactor the mount first with the included M4 screws. After…
- Downloads
- 436
- Likes
- 16
- Rating
- 0
P
PrintablesBobbyThunder
Simagic Alpha Mini Cable Saver (protect your wheelbase from cable snags)
This simple, easy to print model prevents damage to your wheelbase connectors in the event of a cable snag. It prevents the connections from being pulled in any direction except for perpendicular to the surface. I feared that I would…
- Downloads
- 425
- Likes
- 50
- Rating
- 4.5
P
PrintablesSanteri Seppälä
Moza / Simagic sim rig profile mount
I have 2 Moza QR wheels and QR on both of them happen to be in different orientation so I made a mount with uniform groove instead of indents for each steel ball. Tested only on 2 Moza QR wheels I have, but should work for Simagic QR too!…
- Downloads
- 418
- Likes
- 41
- Rating
- 5
P
Printables__lb__
Simagic HPR Haptic Pedals Reactor Controller Box holder
Be aware it's a very snug fit.
- Downloads
- 348
- Likes
- 31
- Rating
- 1
P
PrintablesMartin Majewski
Fanatec CSL Load Cell Brake Adapter for the Simagic P-HPR Haptic Shaker
Description Sim racing is cool, but gear is expensive. That's why I try to get the most out of the most affordable stuff and build up my rig this way. Simagic has a relatively open ecosystem and provides the P-HPR force-feedback…
- Downloads
- 333
- Likes
- 23
- Rating
- 5
P
Printableshaagar
Simagic Haptic Reactor Mount for VRS Pedals
Printed round face down with no supports. Throttle mount fits clutch as well. Updated with groove for power wire.
- Downloads
- 323
- Likes
- 12
- Rating
- 0
P
PrintablesFrenchyAU
Simagic Alpha Evo DDU Front mount
recently picked up my Simagic Alpha Evo Sport wheelbase, i have a DDU that mounts via a bracket onto the front of compatible wheelbases including the original alpha series, since the alpha evo line does not feature native front mounting…
- Downloads
- 308
- Likes
- 18
- Rating
- 0
P
Printablesrumcajcz
Asetek holder for Simagic P-HPR haptic reactor
Allows you to mount the Simagic Haptic reactor on Asetek pedals. First attach the reactor to the bracket and then mount it on the pedal. No extra screws are required for mounting (to install on the pedal, the screws holding the pedal are…
- Downloads
- 299
- Likes
- 15
- Rating
- 0
P
PrintablesJohn
SIMJACK UT Brake Pedal Adapter for Simagic P-HPR (Haptic pedals Reactor)
I could not find a good free model for the SIMJACK Ultimate (UT) brake pedal, so I made one. It does not use the plate that comes with the motor. Print circular side on the plate, support on build plate only. Use Loctite for pedal plate…
- Downloads
- 286
- Likes
- 12
- Rating
- 0
P
PrintablesRatchet Finesse
Simagic Alpha Wheelbase mount
Simagic Alpha Mini Wheelbase mount. May work for other Simagic Alpha wheelbases but I only tested this on a mini. 2 Positions - One is flat and the other is set at a slight angle. Uses M6 x 12-15mm flange head bolts. If you can get flange…
- Downloads
- 251
- Likes
- 31
- Rating
- 0
P
PrintablesJon West
Simagic QR to 70mm Steering Wheel Adapter
I ordered a couple of these Simagic QR adapters for my OSW Simucube wheel from AliExpress because they were dirt cheap in comparison to similar offerings and had good reviews online. When they arrived, I realized that the Simagic/Moza…
- Downloads
- 233
- Likes
- 14
- Rating
- 0
P
PrintablesJonas Lang
Simagic QR Quickrelease Wheelside PCB
A PCB that lets you use aftermarket quick releases to provide power to your diy wheel. You will need the spring pins and the JST connector, they can be found on aliexpress, search terms: “JST XH 2 Pin 90 Degree SMD” (2.54 mm Pitch)…
- Downloads
- 231
- Likes
- 35
- Rating
- 0
P
PrintablesGuShelter
Simagic Alpha U PSU Mount
Bracket for the Simagic Alpha U power supply. This can be mounted on profile extrusion 40x40 or 40x80 Holes for M6 screw
- Downloads
- 226
- Likes
- 29
- Rating
- 0
P
PrintablesJonas Lang
Simagic Alpha (Alpha Mini) PSU Bracket
Horizontal and Vertical Brackets for mounting the PSU of Simagic wheelbases to Extrusion. Fits for 81 x 33 mm PSU. M6 Countersunk screws
- Downloads
- 221
- Likes
- 24
- Rating
- 0
P
PrintablesVargaMark
Simagic P2000 Heelplate
I needed a heelplate for my Simagic P2000 pedals, so I designed and printed one. It can be printed in 2 parts (even on a Prusa Mini). You'll need 7pcs of countersunk M6 bolts: M6 x 20-24mm bolts - 4pcs for the 4 corners to fix the plate…
- Downloads
- 220
- Likes
- 26
- Rating
- 5
P
Printablespeer69
Simsonn Pedals Mount for Simagic P-HPR (Brake / Throttle)
Disclaimer: This model is a WIP, has not been tested in terms of durability and is likely going to change. Throttle Mount: Insert M4/M5 Nuts into the adapter Screw HPR to printed part using the provided metal-mount and screws Screw…
- Downloads
- 218
- Likes
- 21
- Rating
- 5
P
Printablestanmaychhatbar
Simagic Steering Wheel Quick-Release Compatible Mount
v2 (2025-12-15) fixed complaint about bent pins
- Downloads
- 212
- Likes
- 16
- Rating
- 1
P
PrintablesJordi
Simagic Alpha Mini PSU Mount
Bracket for the Simagic Alpha Mini power supply. This model is for the older and bigger variant. Holes for M6 screws.
- Downloads
- 208
- Likes
- 41
- Rating
- 3
P
PrintablesSimps0n
Simagic P2000 Heel Stop
You'll need a larger 3D printer to print the heel stop in one piece
- Downloads
- 200
- Likes
- 26
- Rating
- 0
P
Printablesdavid0n
simagic P-HPR mount - for Fanatec ClubSport v3 Pedals
here is a very simple mount for the simagic P-HPR haptic feedback motors to mount them on the Fanatec ClubSport V3 pedals with the D-pads installed. I used two M6 screws and screw nuts to tighten them onto the pedals, and the motors are…
- Downloads
- 196
- Likes
- 30
- Rating
- 0
P
PrintablesJordi
Simagic Alpha Mini Kill Switch Mount
Mount for the power switch on the Simagic Alpha Mini PSU. The two pieces can be joined with glue. Holes for M6 screws.
- Downloads
- 193
- Likes
- 23
- Rating
- 5
P
Printablesrfourb
Simagic P-HPR Adapters for Heusinkveld Sprint Pedal - No Supports
Just some small tweaks to these incredible adapters to make for easier printing and assembly. Printed in Jessie Elixir PLA on a MK4S.
- Downloads
- 191
- Likes
- 14
- Rating
- 5
P
PrintablesMartin Majewski
Simagic P1000 (F) Pedal Plate with Sidestop
I love my P1000f pedals from Simagic for many reasons, but the original pedal plates are not one of them. I found them too slippery and small, and the curvature is not precisely “sporty”—at least for open-wheel racing. My take on the…
- Downloads
- 187
- Likes
- 25
- Rating
- 0
P
PrintablesChris Lee
Simagic HPR Mount for VRS Pedals
Works for both throttle and brake. Suggest to use PETG or ABS. You can rotate it so the wire goes left or right.
- Downloads
- 179
- Likes
- 15
- Rating
- 0
P
PrintablesMike
Simagic Alpha Mini power switch case
added 2 bosses for 2 M3 screws to hold the case halves together instead of gluing
- Downloads
- 178
- Likes
- 24
- Rating
- 0
P
PrintablesAstrovore
Magnetic Phone Cradle for Simagic Alpha Evo
This is a simple phone cradle for the Simagic Alpha Evo line of wheelbases that you can use with the Simhub app to display your vehicle dashboard. It is secured to the base via two embedded magnets that attach to the magnets in the front…
- Downloads
- 172
- Likes
- 16
- Rating
- 0
P
PrintablesVHF
Simagic P2000 Heel stop
Remix of the adapted heel stop founded here https://www.printables.com/fr/model/679441-simracing-pedal-heel-stop It's a reproduction of the aluminium heel stop from Simagic but the height makes your feet taking a second point of rotation…
- Downloads
- 172
- Likes
- 15
- Rating
- 0
P
PrintablesBoostinIX
Simagic Alpha Mini PSU - Smaller Remix
My Alpha Mini PSU was significantly smaller than the existing bracket STL, remixed it smaller to fit.
- Downloads
- 169
- Likes
- 16
- Rating
- 0
P
PrintablesSamuel Tremblay
Simagic P2000 Haptic Electronic Box
It reuses 4 of the m3 screws on the standoffs. They screw directly in the hole in the bottom of the box. Doesn't need supports if your printer is good with bridges. Maybe little supports for the conterbored holes on the cover. Need 2x…
- Downloads
- 166
- Likes
- 14
- Rating
- 0
P
PrintablesKyle Myers
Simagic Universal Phone Mount
This is a height adjustable phone mount that I designed for the Simagic Wheel bases. I only tested it with my Simgaic Alpha, but it should work with others as well as they should share the same mounting bolt pattern. Pixel 1 is pictured…
- Downloads
- 155
- Likes
- 10
- Rating
- 5
P
PrintablessiManthrop
Simagic Alpha Evo Dash Mount
Simple Dashboardmount for Simagic Alpha Evo Series Wheelbases. Please note that the mounts are installed on the Sides of the Wheelbase, what will interfere with Wheelbase Sidemounts. Holedistance for the Dash is 100mm. When you print it…
- Downloads
- 155
- Likes
- 9
- Rating
- 5
P
PrintablesRaffaele Izzo
Simagic Alpha EVO Tablet holder
This is a simple tablet/phone holder that screws in the Simagic Alpha Evo 9 and 12 nm. I am 100% sure it can be done better and more efficiently. This is my first 3d designed model done in an hour today.
- Downloads
- 148
- Likes
- 8
- Rating
- 0
P
PrintablesMaximotep
Simagic EVO PRO psu holder 8040
PSU holder for Simagic EVO PRO. Mount for 8040. You need a L an R version. M6 or M8 versions. Step avaliable if you need to custom it.
- Downloads
- 148
- Likes
- 7
- Rating
- 5
P
PrintablesMNK
Thrustmaster T-LCM Simagic P-HPR Mount
Uses the original hardware. First, mount the haptic reactor, then use the default screws to attach it to the pedals. The faceplate can be slid upward, but this will reduce contact Print it on its side with no support needed
- Downloads
- 147
- Likes
- 13
- Rating
- 5
P
PrintablesFurysamurai72
Simagic p500 P1000 Enlarged Brake Pedal
I had downloaded the long throttle plate for the P1000 pedals from this post here: https://makerworld.com/en/models/456344#profileId-364175 and I wanted to make a brake pedal that matched. I have the Simagic P500 pedals, and the mounting…
- Downloads
- 145
- Likes
- 11
- Rating
- 0
P
Printablesmichaelpm91
Simagic P-HPR Neo Haptic Pedal Reactor Neo mount for Moza SR-P pedals
A simple adapter to fit the Simagic P-HPR Neo to Moza SR-P. Mounts to the back of the pedal and holds the P-HPR Neo to the back. Requires 2 x M4x20 countersunk screws to hold the HPR to the adapter, and 4x M4x10 wafer-head low profile…
- Downloads
- 144
- Likes
- 15
- Rating
- 0
P
PrintablesCaptainSandwich
Simagic P2000 Controller 4040 Mount
Requires 2x M6 socket head cap screws to fasten to the 4040 extrusion. Does not require any additional hardware to secure the P2000 controller, it simply snaps into place as shown in the gif. Orient the part on the build plate so it…
- Downloads
- 143
- Likes
- 14
- Rating
- 0
P
PrintablesAlpine Fab
Simagic P2000 heel stop plate
Another spin for Simagic P2000 heel stop. Cut it in slicer in to two pieces to fit in one print job. Takes about 8h to print on Prusa core.
- Downloads
- 134
- Likes
- 20
- Rating
- 5
P
Printablespandax
Simagic Alpha Mini phone mount
Ok, so, basically, I won't pay for such a simple model - and neither should you. So, after realising there is nothing readily available for free, and simple to print, I quickly designed my own. Designed around an old Xiaomi Note 9 pro…
- Downloads
- 132
- Likes
- 16
- Rating
- 0
P
PrintablesJohnny Boy
Simagic Neo X Series Steering Wheel Center Cover – Custom Logo
Tired of the stock Simagic logo in the center of your steering wheel? This 3D-printable center cover lets you customize your Simagic Neo X 330R Classic or X-350W Drift wheel with any logo or design you want. (it should also work for…
- Downloads
- 127
- Likes
- 16
- Rating
- 0
P
PrintablesTuckers Tinkering's
Simagic Alpha Adapter for Moza Stalks
This model allows you to use the Moza Stalks with any of the Simagic Alpha line of wheelbases. The adapter allows the Stalks to sit as close as possible to the wheelbase, maximizing room for your wheels and fingers. The adapter is a tight…
- Downloads
- 125
- Likes
- 15
- Rating
- 0
P
Printablesc4tkybnm
Simagic Alpha PSU 8020 mount
M8 mounting hole Standard printing profile - 2 walls, 15% infill, etc No supports/brims needed
- Downloads
- 120
- Likes
- 19
- Rating
- 0
P
PrintablesAlpine Fab
Simagic P2000 Accelerator pedal
Made this Accelerator pedal for P2000 kit. It might work with other simagic products, but I don't know. **UPDATE 4/4/2025 Integrated M6 threads into the pedal and minor fitting tweaks. Created matching brake or clutch pedals. Easy to…
- Downloads
- 113
- Likes
- 15
- Rating
- 5
P
PrintablesJulian Lemuren
Simagic P-HPR Adatper for Simagic P2000
Ich habe mal ein Adapter für die Simagic Shaker modelliert. Leider habe ich keine bei mir. Deshalb hoffe ich, dass der Flansch passt. Allgemein ist das Bauteil ziemlich straff in der Öffnung vom Pedal. Das muss so! Gebraucht werden 2x M5…
- Downloads
- 113
- Likes
- 12
- Rating
- 0
P
PrintablesSebastian Schels
NRG / Moza / Simagic - Quick release Mount
You could use an M6x16 screw to mount it on your Aluprofile, or any M6 countersunk for any other place. So I made two version. Print with 5 Walls / around 20% infill. Version M6x16 Version Countersunk:
- Downloads
- 110
- Likes
- 12
- Rating
- 0
P
PrintablesAlpine Fab
Simagic pedal covers
Created those pedal covers for my simagic p500 pedals. It might work for other simagic pedals as the bolt pattern should be the same. They are a little thicker and might need longer screws. I printed them in flex to have extra feel under…
- Downloads
- 110
- Likes
- 16
- Rating
- 5
P
Printableslimeaway
Simagic Maglink Enclosure
The connection between the main cable and extension is a weak point of the Simagic Maglink. Intermittent disconnects happen frequently with just a very light tug of the main cable. This enclosure keeps the connection nice and snug.…
- Downloads
- 107
- Likes
- 17
- Rating
- 0
P
Printablesviperman3
Simagic GT Neo 7-way Switch Hat
Wanted to add a custom cap on the Simagic GT Neo Wheel 7-way switch which allowed for better rotation of the knob while Update: Created a V2 version where the interior of the cap is coned to better match the Simagic 7-way Hat (Image…
- Downloads
- 105
- Likes
- 20
- Rating
- 5
P
Printablestheazum
Simagic DS-8X shifterknob
A beautiful shifterknob i remixed Shortened and rethreaded to fit Simagic DS-8X Printed in Polyterra black 0.2mm
- Downloads
- 103
- Likes
- 9
- Rating
- 5
P
Printablesjaizm
Washers for Simagic P500 with P-ORP(H) springs.
Washers for Simagic P500 with P-ORP(H) springs.
- Downloads
- 100
- Likes
- 5
- Rating
- 0
P
PrintablesSeven Sam
Asetek Pagani Huayra R Pedal - SIMAGIC P-HPR Haptic pedals Support adapta
Print no need for support, print with the motor plate on the bed side i printed @ 100%, but 50% it's okay you have to put the screws in before mounting the motor, unfortunately the crankset spacing is barely smaller than the motor Step 1:…
- Downloads
- 100
- Likes
- 6
- Rating
- 0
P
PrintablesAlpine Fab
Simagic foot rest pedal
Foot rest pedal for Simagic P500 pedals. Made this to have my foot rest on something. *Update 3/8/25 made small revision to the mount. It was a bit too thick in the first version.
- Downloads
- 97
- Likes
- 11
- Rating
- 5
P
PrintablesBruno
Simagic Alpha Mini PSU Bracket for 4040 extrusion (Small PSU)
This is for the latest version of the PSU (74mm width) which is smaller than any files I found around
- Downloads
- 88
- Likes
- 10
- Rating
- 0
P
PrintablesBaddi
Wheelbase mount for Simagic Alpha MIni
primarily intended to mount the Simagic Alpha Mini to wood rigs or wheel plates Pring the base with 70% + infill and the wedge with 30+ Category: Video Games
- Downloads
- 87
- Likes
- 6
- Rating
- 0
P
PrintablesLinx
Simagic QR USB PCB Wheelside
30/09/25: Fixed hole spacing Inspired by https://www.printables.com/model/489715-simagic-qr-quickrelease-wheelside-pcb but with the USB pins. Add pogo pins on one side and a JST PH conector. GT Neo pogo pins are 4.0mm tall when…
- Downloads
- 82
- Likes
- 8
- Rating
- 0
P
Printablesmafikes
Steering wheel center cover cap simagic
Center cover for steering wheels for sim racers or real race cars with QR 70mm. I designed 3 versions: Simagic style - only 3 holes - other holes are hided undeer the cap. You need to use special screws. Rounded cap - rounded cap with all…
- Downloads
- 80
- Likes
- 10
- Rating
- 5
P
PrintablesJulien B&R
Simagic Led Cover
This part can be used to slightly or completely hide the LED on the Simagic Alpha Mini base. For the light-shielding version, you need to configure your slicer to have a single layer printed for the thinnest part. Personally, I print it…
- Downloads
- 79
- Likes
- 13
- Rating
- 0
P
PrintablesAlpine Fab
Simagic pedals covers
Made those pedals for my P500 pedals and printed them in flex. It makes the pedals feel nicer and not as slippery. Brake pedal cover is little thicker, when printed with 15% infill with flex filament it adds little causing when braking…
- Downloads
- 77
- Likes
- 17
- Rating
- 5
P
Printablesmitz
Simagic controller box for haptic mount V2
Simagic controller box for haptic mount V2 A lot of updates from the remixed version: - Strengthened top latch by 1mm - Fits M8 and M6 T-nuts - Side grooves for Zip Tie mount - 0.5meter less filament 2 versions; - 40 aluminium profile…
- Downloads
- 77
- Likes
- 4
- Rating
- 0
P
Printablesmacmanluke
Simagic GT Neo/Neo X/ QR50 20mm+30mm Spacer
Simagic GT Neo / QR50 20mm Spacer Moves the wheel closer for a better match with a deep dish round wheel Requires 3x 32-35mm M5 Countersunk screws Can upload other thickness as requested Update: 30mm version added - would require 42-45mm…
- Downloads
- 76
- Likes
- 8
- Rating
- 0
P
PrintablesSimps0n
Simagic P2000 Pedal Plate
You'll need a larger 3D printer to print the pedal plate in one piece
- Downloads
- 74
- Likes
- 10
- Rating
- 0
P
PrintablesVirtasy
Simagic P1000 Hydraulik Spring Spacer
i have redesigned the spacers because the original ones don't fit perfectly. if you're unlucky, the spacer in the cover breaks the first time you operate it. On the cylinder side, the spacer does not fit into the aluminum ring. i have…
- Downloads
- 71
- Likes
- 6
- Rating
- 0
P
PrintablesCJMW66
Simagic Alpha Ultimate Power Unit Mount
PLA 0.20 3 perimeters 30% infill Brim Mount with M8 bolts in your simracing rig.
- Downloads
- 70
- Likes
- 6
- Rating
- 0
P
PrintablesSomeDude
Thrustmaster Simagic Maglink Adapter
Description WARNING - You need to determine if your printed adapter is strong enough based on your setup and equipment. There's no way I can guarantee this model won't fail. There are too many variables including the quality of the…
- Downloads
- 70
- Likes
- 9
- Rating
- 0
P
PrintablesReese Boisse
Simagic P-HPR Haptic Motor Mount for VNM Pedals
Bracket to mount Simagic haptic motors onto VNM V1 pedals. Prints without supports Category: Video Games
- Downloads
- 69
- Likes
- 4
- Rating
- 0
P
PrintablesEndless_Speed21
Simagic Haptic P-HPR for Moza CRP peddles
A set of brackets to mount the Simagic P-HPR Haptic Pedal Reactor on the original Moza CRP pedals. Which only need M4 Nuts & Flat Head Countersunk Screws The brackets are designed to hold the haptics as close to the pedal as possible,…
- Downloads
- 69
- Likes
- 8
- Rating
- 0
P
Printablesmicsafdas
DDU Dashboard for Huawei Nexus 6P for Simagic Front Mount
This is a DDU/Dashboard Mount for a Nexus 6P. It will likely not fit anything else, that's why I added also the Fusion file for you to adapt it to other measurements. If you think about using a phone as a Simhub Dashboard, consider the…
- Downloads
- 67
- Likes
- 6
- Rating
- 0
P
PrintablesSylar LEE
Simagic Alpha Mini Phone Mount
A print-in-place phone holder for the Simagic Alpha Mini wheelbase
- Downloads
- 66
- Likes
- 4
- Rating
- 0
P
Printablesmattis940
Simagic Alpha with adjustable angle mount for 40x80 extrusion
This is made to fit Simmagic Alpha models. Printer with a 0.4mm nozzle at 0.3mm layer height. Used 20% infill. When setting up in slicer you have to add an instance and then mirror it to make a pair. Make sure to use enough vertical…
- Downloads
- 65
- Likes
- 7
- Rating
- 0
P
PrintablessiManthrop
Holder Simagic USB CANbus Hub
I have constructed a simple holder for the Simagic CANbus Hub / Extender. This also serves to conceal the LED. Ideally, print the holder at a 45° angle, so you only need small supports and the holder is more stable.
- Downloads
- 64
- Likes
- 8
- Rating
- 0
P
Printablestililiipililii
Simagic Accessory PSU Holder whit brackets
Simagic Accessory PSU Holder whit brackets for 6mm screws
- Downloads
- 61
- Likes
- 7
- Rating
- 5
P
PrintablesRafael Lima
Playseat challenge - Simagic P500 mount - Universal
Pedal mount designed for the Simagic P500 and Playseat challenge . Although this was designed for the P500, it is generic enough that it can fit most pedals with at least two mounting holes. For the P500 you should probably print 4 sets.…
- Downloads
- 61
- Likes
- 8
- Rating
- 0
P
Printableskrobledo
Simagic Alpha Wheel Base Phone Mount
uses 2x m8 screws for the Simagic Alpha mounting holes no need to reprint your phone mount if you had one from the fanatec model, but I've added the model from DrKriegerAUS in case you need it
- Downloads
- 61
- Likes
- 7
- Rating
- 0
P
Printablestrevor neville
Meca evo1 simagic rumbler adapter - brake pedal
Made a quick adapter for the Meca evo1 brake pedal to utilize simagic's rumbler kit. Uses existing hardware from both the pedal and rubber kit. Recommend printing strong for a solid feel.
- Downloads
- 59
- Likes
- 3
- Rating
- 0
P
PrintablesHK Design
Simagic P1000 modified brake spacers (more travel/configuration options)
This brake modification increases the usable space in the brake piston by freeing up unused space in the original design. This allows up to 3 springs to be used at once, significantly increasing pedal travel. Also, longer spring and…
- Downloads
- 58
- Likes
- 7
- Rating
- 0
P
Printablesmafikes
Dashboard VoCore 5" for Simagic Wheelbases
This dashboard is designed for sim racers who own the Simagic wheelbase. It is easy to print and assemble, and has an attractive appearance. You only need to purchase the display separately. It is not compatible with new Simagic EVO…
- Downloads
- 57
- Likes
- 10
- Rating
- 0
P
PrintablesJonas Lang
Simagic GTC Paddle extension
Materials needed: 4x M3x10 mm Screws 4x M3x8 mm Screws 4x M3 Heat Insert
- Downloads
- 56
- Likes
- 6
- Rating
- 0
P
PrintablesGuShelter
Simagic Tablet Mount
Please ,check your dimensions tablet if they can be compatible.
- Downloads
- 56
- Likes
- 6
- Rating
- 0
P
PrintablesRobert Henry
Simagic HPR NEO Mount for HE Sprint Pedals
This is a simple and easy to print adapter to solidly mount your HPR Neo haptic devices to your Heusinkveld Sprint pedals. These print and work well using PLA. I also printed using ABS. 100% Infill is recommended. 50% infill works fine…
- Downloads
- 55
- Likes
- 3
- Rating
- 5
P
PrintablesBaddi
Dashboard for Simagic Alpha Mini
Dashboard for Simagic Alpha Mini with Vocore 5" Screen powered by Simhub Print Settings Printer Brand: Robo 3D Printer: R1 PLA Model Rafts: No Supports: No Infill: 30% Filament: Hatchbox PLA Category: Video Games
- Downloads
- 55
- Likes
- 8
- Rating
- 0
P
Printablesmehmetgul
Simagic Alpha Evo Sport Mount
This mount is a part of my poang semi rig. I printed 5 walls %7 infill and 0.28 layer height. For stronger, u can increase infill… Attachment cavities opened for M4 screw. Wheels screw is M6 as u know. Enjoy.
- Downloads
- 54
- Likes
- 2
- Rating
- 0
P
PrintablesShaun Doe
Fanatec CSL LC Brake adapter for Simagic P-HPR (Remix)
Recommended print settings: Use the largest nozzle you have (E.g. I printed it with an 0.8mm nozzle and 0.4mm layers) Use 20% grid infill
- Downloads
- 52
- Likes
- 6
- Rating
- 0
P
PrintablesBaddi
Simagic QR adapter for Alpha Mini
adapter to mount wheel or aftermarket quick release directly to a Simagic wheelbase. this was made for the Alpha Mini but likely works with most current and past simagic bases Print Settings Printer Brand: Robo 3D Printer: R1 PLA Model…
- Downloads
- 52
- Likes
- 3
- Rating
- 0
P
Printablesrkovachev
Simagic Alpha direct mount Fan Shrouds
Inspired by https://www.thingiverse.com/thing:5904059 , I created a direct mount Fan Shrouds for Simagic Alpha and Alpha Mini Wheelbases. I'm using M8x16 bolts and Sunon MEC0381V1-G99 fans.
- Downloads
- 50
- Likes
- 12
- Rating
- 0
P
PrintablesRoman Kingsglaive
Simagic Haptic Pedal Reactor (P-HPR) Bracket for Fanatec Clubsport V3 Pedals
Model is basically an enlarged version of the provided bracket, which fits the holes of the plastic pedal. Use screws that came with the P-HPR, and I think it's a m4 nut on the other side.
- Downloads
- 50
- Likes
- 4
- Rating
- 0
P
PrintablesJERRY
Simagic Alpha Evo Smartphone / Tablet Mount
Balljoint got a diameter of 17,2mm Designed to combine with locknut / Mounting thingy like these https://www.amazon.de/dp/B08MKJX4MH?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1…
- Downloads
- 50
- Likes
- 1
- Rating
- 0
P
PrintablesMattias Johansson
Simagic haptic mount for Fanatec V3 pedals
An easy way to mount Simagic haptics to your Fanatec V3 pedals
- Downloads
- 50
- Likes
- 2
- Rating
- 0
P
PrintablesChris Gambino
Simagic Accessory Power Supply Mount
Created a bracket to mount the smaller simaagic power supply (the one you get if you decide to add accessories to the simagic pedals, like the heel stop lights or haptic pedal reactor) to whatever you like (I have created a blank bottom…
- Downloads
- 48
- Likes
- 6
- Rating
- 0
P
PrintablesKuba
Girro Sim - SIMAGIC Haptic Pedal Reactor Mount
The Simagic Haptic Pedal Reactor mounting bracket is compatible with all pedal sets from the Girro Sim company
- Downloads
- 48
- Likes
- 2
- Rating
- 0
P
PrintablesJulian Lemuren
Simtag Ashley- Simagic HPR Mount/Adapter
Hier eine Option auch die Simagic HPR Shaker an den Ashley's zu nutzen. Der Motor wird mit 4 M4x20 Schrauben wie üblich an dem Bauteil geschraubt und wird dann über dem Pedal arm gestülpt. Danach schraubt man die Pedalplatte wieder an den…
- Downloads
- 47
- Likes
- 1
- Rating
- 0
P
PrintablesxR3mcz4q_
Simagic Alpha 15Nm Cable Saver
I edited cable saver for Simagic Alpha Mini 10Nm to Simagic Alpha 15Nm. It is 10 millimeters longer.
- Downloads
- 46
- Likes
- 4
- Rating
- 0
P
Printablesshiberu
Simtrecs X Simagic Haptics Reactor Adaptor (Brake Pedal)
Hardware needed - 2x M6x10 countersunk screws
- Downloads
- 46
- Likes
- 6
- Rating
- 5
P
PrintablesKroms_prints
Simagic Tablet Dashboard
Dashboard Tablet Halterung für Simagic Wheelbase. Gedruckt mit eSun PLA CF. 2xM8 Zylinderkopf Schraube benötigt
- Downloads
- 45
- Likes
- 6
- Rating
- 0
P
PrintablesGSNeko
Simagic P2000 electronics box with screws
I wanted to mount the p2000 electrinics box with screws so I made this mod
- Downloads
- 45
- Likes
- 6
- Rating
- 0