14,785 models
This remix of the Mushroom-themed Print-in-Place Twisty Puzzle Box turns it into a simple twist lid container. https://youtu.be/sBsHtqxGVIw https://www.youtube.com/watch?v=3nYm0oPaSr4 Printing All parts print without supports Consider…
Print approx. €13.09–€16.00 excl. taxPreliminary estimate for one variant
Simple model(1:18) kit card of Golf GTI mk1 with twin headlights. It's not a completely accurate model, it's more of a puzzle. The recommended material for printing this model is PET-G, but it is not a condition. Good adhesion to the bed…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
It was dusty and harsh out in the wild west desert. Those steely-eyed cowboys and cowgirls in the saloons would eye each other off over cards, waiting for the inevitable showdown when someone yelled "cheat"! But, that begs the question:…
Print approx. €2.64–€3.22 excl. taxPreliminary estimate for one variant
This simple and efficient 3D-printed toothpaste squeezer 🦷✨ is designed to help you squeeze out every last bit of toothpaste with ease! Features: ✔ Super Fast Print – Ready in just 12 minutes without calibration! ⏳🔥 ✔ No Hassle – No need…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for one variant
Sanding block with simple construction. Made to work with a 38mm x 230mm - 240mm sandpaper stripe. After trying out a few sanding blocks, not finding anything fitting my needs. Either they were over-complicated, screws were fiddly, the…
Print approx. €3.58–€4.38 excl. taxPreliminary estimate for PETGSource material: PET
A nice and simple wind and sand inspired wall decoration for your home. Print information: Recommended standard base printer settings Recommended using a lower layer hight (0.15/0.2mm) for better results in details Prints very good in any…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
The M6 Handle Collection offers a robust and practical handle for M6 screws – in 12 different sizes , providing maximum flexibility for your projects. This universal design is perfect for workshop applications, mechanical engineering,…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
I would love to see everybody's remixes. The inside diameter is: 20mm The outside diameter is: 25mm I've uploaded the FreeCad file so its easier for you to edit the ring size. Print settings: I wouldn't recommend Prusa slicer for this…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
VERSION 2.8 UPDATES: Added two new covers which have the digit market tiled 1 over, just print one of each of the left and right versions and follow assembly as normal! (Thanks to prusaprinters user Hellfish for the suggestion) This is a…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
Inspired by an old set of tokens I had found on this site. https://www.thingiverse.com/thing:2591952 Made in the same syle as my other tokens and using the JoCat icons for the classes. Easy to print tokens for when you can't find just the…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Introducing the Cherry MX Compatible Flat Top Keycap, the 3D printed keycap that makes typing a whole lot more fun! With its sleek and stylish flat top design, this keycap is the perfect way to add a personal touch to your keyboard.…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
A simple seat belt clip version 2 This clip is intended to hold the buckle in desired position. Somehow the seat belt buckle position is quite low on my car and it's kind of tiring to pick. I designed it for my car (BMW F22 2 series…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
I needed a game case holder for 14 PS4 cases but only found designs to hold 10/12 cases on here & Thingiverse. I didn't want to print multiples or consume the time/material required for existing case designs, so I made my own. This holder…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
I have recognized that the adjusting with a credit card, as described here https://help.prusa3d.com/en/guide/how-to-adjust-the-height-of-the-m-i-n-d-a-sensor-mini_154547 , is not good for Super P.I.N.D.A because the Z-Live will be…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Sad fact: Benchy doesn't float , but I have 10 of them and my daughter wanted to play with one in a bath. So I quickly designed one very simple floating boat. It floats great and it can carry smaller toys too, including a Benchy :-) In…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
I think we all know the frustration that can come from residue on the nozzle which can leave blobs on the print or even ruined it completely. well here is a very simple solution! I have been using this nozzle cleaner for over a year and…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Crochet Block board with 4.10mm hole designed for 4mm wooden dowels
Print approx. €21.54–€26.32 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
Simple Process Diagramm Template (ISO 5807) in a 5 mm Grid (20x40)
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15% Printer Brand: Prusa Printer: MK4 Filament: Prusament PETG Signal White, Jet Black
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for PETGSource material: PET
I made this quick and easy USB Case to use and remix it into way more interresting Cases. I used this USB Sticks from Amazon because it is a widespread model and easy to take apart. I look forward to see your remixes and will add some…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Print Settings Material: Prusament - Royal Blue / Azure - Silk Sand Nozzle: 0.4mm Support: No
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for one variant
3D-printed wall-mounted holder with a two-part design. The holder consists of a U-shaped base that is attached to the wall and a insertable component with two holes for screws or bolts. The insert pieces are made to slide into the base…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
A simple cube with 2cm length.
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
This simple laptop stand rises the rear side of your laptop by 22mm to improve cooling and give a slight angle to the keyboard. Unlike other models, this one is all of the following: Simple and not over-engineered Stable Light, but sturdy…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
This is a simpel modern looking bracket for angled (15°) furniture legs. This model in particular fits 30mm round wood rods. Tho, keep in mind due to filament shrinkage while printing and manufacturing tolerance of your chosen leg…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Put together your own little western train The 4-4-0 is an icon of railroad history. I created my own version as a tribute and based it on the shape. The somewhat comic-like variant allows you to put together your own little train. There…
Print approx. €4.50–€5.50 excl. taxPreliminary estimate for one variant
Each hinge is made up of two parts in a single STL file and will work right off the print bed. DO NOT USE SUPPORTS as they aren't needed and will likely cause the hinges to not work. The hinges are provided with and without countersunk…
Print approx. €2.19–€2.67 excl. taxPreliminary estimate for one variant
A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
I used the next settings : -15% filling -0.15mm quality layer height - support on tray only
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
Updates! Reorganized parts listing for clarity About After spending some time trying to use a telescope camera with the wonderful Hadley telescope by Maff , I decided I needed a focuser that didn't rotate. Rather than wait, I decided I'd…
Print approx. €6.78–€8.29 excl. taxPreliminary estimate for one variant
This is a simple print of a toy space shuttle. Despite slicer warning, supports were not required on my Pruse MK3. A simple print, toy airplane can be found here .
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
This is a very simple box for the new Raspberry Pi HQ camera module as I wasn't comfortable having a bare PCB flapping around. To install the module carefully remove the rear focus adjustment ring. Screw the module down into the case with…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
UPDATE 22.2.2022: added robust 3mf file - by scaling up Z axis (may help if anyone has problem with breaking the clips) For my use I needed tight clipping of the filament, so I have remixed original from JoelG (thx for the design, it is…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Design description I needed a 6x1 bin and couldn't immediately find one. My print-bed is large enough to print it diagonally, so I didn't want to deal with sideless bins and simple created one myself. This has a height of ⅔, stackable…
Print approx. €3.68–€4.50 excl. taxPreliminary estimate for one variant
Material: Prusament - Galaxy Black PLA Layerheight : 0.2mm IS (Structural) Vase mode : Yes Tip #1: If you want to fill it with water, I recommend this post on printing on waterproof.
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Lamp shade for E27 lamp socket. Please only use with LED light.
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for one variant
A simple rose that is easy to print. The Print uses about 8 grams of filament. I have created a few different version to allow for different ways of producing a multi colour printing. Rose Multiple Height This model has the rose part…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Plants need fertilizer. Manual dosing kept me doing to much or too little with results accordingly. The pumps feed liquid fertilizer into the irrigation system while watering. Dosing can be adjusted on a very wide range. A lot of…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
It is a very simple to print but also useful stand for your phone or tablet. Phone compartments are 9mm wide. If your phone is thicker, you can enlarge it and print it accordingly.
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
I needed a easy child lock for a drawer, that works until the child is too smart. This attaches with a screw and then pivots around the screw protected by the "pin". There is a little bit of a ridge on the back to catch the side of the…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
This model is designed to print quickly. I love design which use minimal time and material. Size is for 4, 6, 8, 10, 12 pcs batteries. Depleted batteries could be stored upside down to identify them from those already charged and ready…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
the strength and quality of the model is sufficient for children. It passed the kids' stress test Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Red and Black Filament material:PLA…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
This part is a flat compass. That's right! You don't need a compass. The way this works is that you need pencils. One pencil starts at the center, and the other at wherever you want to specify your radius. To specify your radius, there is…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Easy print - no supports needed. Gcode prints two as in the picture. I printed it at .15 you you could easily do it at .3. A little bit of CA glue to assemble.
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for one variant
Simple stand for light bulb. It is designed for an e27 socket / bulbholder with 40mm in outer diameter.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
An easy and simple design I started by reproducing the original model on a paper and use it as Canvas in Fusion 360 Then design the spatula using Circles and Splines One Extrusion and a Chamfer after here is the spatula ready to be…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Simple witch hat, I printed with 0% infill and no supports. The "model" that is pictured is https://www.printables.com/model/291519-ghost-booh
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
If you print it bigger, you will get better results. I scaled it the smallest possible way according to my needs. So scale it to at least 150%. Be careful with your hot gun. There are a lot of fine details. They could just fall down.
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
This will print best using supports, but it doesn't need a lot. I recommend these settings: Perimeters: 2 Infill: 15% Rectilinear (first 13mm) 15% Lightning (everywhere else) Supports: 35 degree overhang using Organic supports For extra…
Print approx. €6.28–€7.68 excl. taxPreliminary estimate for one variant
I created this collection for the cerealbox i use ( Link ) A scound reason for this was, that i hadn't found a good drybox with a easy and robust rewind function so i had to create this. A third reason for this was, that all the dryboxes…
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for PETGSource material: PET
Nothing too complicated - just a box for loose stack of note papers. But it was useful practice task on modelling a hexonal grill in Inventor. Designed with inner space sized 90x90mm, can be easily scaled up or down for different papers.…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for PETGSource material: PET
This is a reaaallly simple spatula you can use for whatever you like. Easy and fast to print with any material you have at hand. Made this quickly for my wife in need of mixing some components for her crafting project… Feel free to resize…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
This is a (by far) the simplest AA storage box designed for rapid printing. it fits 36 AA batteries with ease of access. It's designed for rapid printing (0.6 nozzle) with appropriate wall thickness to match 2 perimeters with the…
Print approx. €5.01–€6.12 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of my own Travel Battleship game. After having printed two sets of games, I saw that there are a lot of parts (2 x 64 markers). Then I realised that it is not necessary to track your opponent's shots, with exception when…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This is a remix on a popular filament clip - https://www.printables.com/model/49667-simple-universal-filament-clip-v2 I use vacuum sealed bags to keep my filament dry and I noticed the bags using the original model started to leak air,…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
An old design of one of our first models - hadn't been posted yet, so we hope you like it! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print)…
Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant
Put together your own little western train The Sattle Tank locomotives are pure workhorses that help to create space or move wagons over short distances. There are also 2 wagons that transport either timber or livestock, which can be used…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Turn the screw to tighten Great for thicker desks
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
A Christmas themed plant pot for a cozy Christmas time! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
The angle is stabilized by the guide in the profile and is fixed with M6 countersunk screws. Is a favorable alternative to the metal version. Suitable For this a printable slot nut to insert into the profile:…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
Simple Plant Saucers
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for one variant
Eine Zettelbox in drei verschiedenen Größen (60 mm, 90 mm, 120 mm) für Zettelblöcke 90 x 90 mm. Print instructions Printed on Prusa i3 MK3S Layer height 0.20 mm Infill 15% No supports, no brim
Print approx. €5.26–€6.43 excl. taxPreliminary estimate for one variant
A small, simple jewelry box with a ring holder and a strawberry pattern. The interior sections have sloped walls to grab things easily and varying depths to organize. Printed with PLA 0.15 Quality settings
Print approx. €9.09–€11.11 excl. taxPreliminary estimate for one variant
This was built around Craftsman tools but should work fine for other analogous brands by adjusting the parametric file. Print Settings .6mm nozzle at .32mm layer height. 3 perimeters for both vertical, top, and bottom. (Go higher for more…
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
This is my design of an simple but beautiful hook to hang clothes or bags to a clothes rail. I designed it to be unobtrusive and functional. Update 2022-09-27: Added D18 for Ikea furniture. Added visual catalog. Added labels to the model…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
These G-Code files help you to easily feed 200 mm of filament through your nozzle at different flow rates in order to adjust your Idler tension. Just copy the files onto your SD card, pre-heat your hotend and select the one you want.…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
Simple Bottleopener, PLA, no coin or insert required, G-Code for Prusa i3 mk3S+ is added. Lasts quite a while even without a metal insert.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
This is my first attempt to build a 3D printer enclosure for my Prusa i3 MK3S. I used 0.060" (~1.5mm) 2'x2' (~610mm x 610mm) sheets of polycarbonate since I already had them from another project, but the polycarbonate is definitely not…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
The OEM Prusa i3 MK3* spool holder has been fantastic, but, with the welcomed transition to cardboard filament rolls from many manufacturers, can lead to the creation of unwanted dust as the spools that drops directly down onto the print…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
It's 1mm thick bookmark/divider which works well for me in my planner when printed with 100%
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Print directions | PETG material recommended but any material works fine, recommend 0.2 mm layer height or less for smoothest results on the angled edge. Easy print, no supports required.
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
You should rotate the model 90deg to avoid mass usage of supports.
Print approx. €4.47–€5.47 excl. taxPreliminary estimate for one variant
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Full Set for Sale: https://www.printables.com/model/745337-simple-ceramic-vase-home-decoration-full-set Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Print approx. €4.41–€5.39 excl. taxPreliminary estimate for one variant
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Robot based on the excellent Youtube tutorial by SouthernGFX. Sculpted and optimised for 3D printing: added thickness, split into easily printable parts. The gcode files are split up into “body+head” and “eyes” so you can do a multi…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
/!\ This is a concept, work in progres /!\ Edit 9/03/2026: V2 available here: https://www.printables.com/model/1632023-v2-multi-material-kept-simple By printing this set of part and adding the special toolchange Gcode in your slicer you…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
As the eponymous and famous memes called "it's fine" you will find here a marker of this memes to remember in any circumstances that you will find worst situations than your one and if it's really a bad situation, you will find a little…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
This simple bookmark is designed in Fusion360. 2 versions available, one with text and another without. Bookmark is 1mm thick but it can be adapted to 0,6mm to fit better to the book. Therefore adjusting Z scale in slicer can help. I…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Por la forma distinta del montaje de la Genius a la Sidewinder. Hice este portabobinas simple a base de los existentes para los que tienen la genius como yo.
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2.5 meters of filament, so it can be a great addition to your…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
Just a simple, quick holder for Hakko soldering iron tips. Printed with PETG, no supports. Easy-peasy. The case is non-magnetic, so some double-stick tape is needed for mounting. There's a flat spot on the back for that.
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Simple Playdate stand. The bump rests in the headphone jack for support, and allows the face of the Playdate to remain uncovered. Designed to be small so as to use little material and print fairly quickly. The attached gcode is with the…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Based on wbphelps ' great design. You can now mount your SimpliSafe using GoPro style arms. This easily increases the range of motion for mounting. Uses normal M5 GoPro mounting hardware. I assembled with modular arms . Also, included is…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Simple eyeglass holder Nozzle: 0.4-0.8mm Layer: 0.3-0.4 (Recommended) No supports needed Scale it as you like :)
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
This is meant to connect the divider panels in the original model. The length is not long enough for a typical bag so, instead, I printed three panels and four rods. The middle panel has a rod inserted half way from both sides. It's…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
I adjusted original filament guide from MK4 for use without PTFE tubes. So filament is guided just in rounded hole. You just need M3 nut and M3x18 screw for attach it onto the spool holder. Update: It appeared some problems with filament…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
Funnel with a simple paddle to stop the flow of, say, rambunctious peppercorns fleeing the pepper mill all over your kitchen floor. Not that it ever happened to me...
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Simple parametric scoop which you can adjust for you own needs. Files You can find the .f3d file for parametric adjustments in the Fusion360 directory. The STL directory contains multiple version of the scoop with different sizes. For the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A very simple RS-25 Rocket Engine I made like 2 years ago. I don't care if you use it, just credit.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
This is a simple Amiibo stand that is useful for anyone trying to save filament or if you have a lot of Amiibo figures and need a simple base to print for all of them. This design, like my other Amiibo display stand allows stands to be…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
MK2 A simple 'pull-out' compact poo bag holder that can be used whilst wearing gloves. For poobag reels upto 32mm diameter and 65mm long. MK2 changes. The bag holder has a coarse screw thread removeable end. The screw-thread end is…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for PETGSource material: PET
When my children were hanging around the house all fidgety and bored, they came to request something to shoot with. I had some 20mm PVC pipe lying around and considered making toy guns. When the thought of blowpipes struck me though, I…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
![Simple Parametric Drill Holder [No Supports]](https://media.printables.com/media/prints/647502/images/5117114_ae712046-2bb2-4ee9-b58c-256a02c0928e_ea100415-6e00-49d6-ad56-c15068b2ea01/img_20231115_132147.jpg)
