14,042 models
This is a simple display stand for Dummy 13 and other 13 Series figures. The stand consists of a base and two arm segments. You can then choose an adapter for your model from the included files. For best results, use ABS or PETG filament.…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
This remix of the Mushroom-themed Print-in-Place Twisty Puzzle Box turns it into a simple twist lid container. https://youtu.be/sBsHtqxGVIw https://www.youtube.com/watch?v=3nYm0oPaSr4 Printing All parts print without supports Consider…
Print approx. €13.09–€16.00 excl. taxPreliminary estimate for one variant
Simple model(1:18) kit card of Golf GTI mk1 with twin headlights. It's not a completely accurate model, it's more of a puzzle. The recommended material for printing this model is PET-G, but it is not a condition. Good adhesion to the bed…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
Sanding block with simple construction. Made to work with a 38mm x 230mm - 240mm sandpaper stripe. After trying out a few sanding blocks, not finding anything fitting my needs. Either they were over-complicated, screws were fiddly, the…
Print approx. €3.58–€4.38 excl. taxPreliminary estimate for PETGSource material: PET
A nice and simple wind and sand inspired wall decoration for your home. Print information: Recommended standard base printer settings Recommended using a lower layer hight (0.15/0.2mm) for better results in details Prints very good in any…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
I need hinges for the Laser Cut Stackable 3D Filament Holder I am designing. I had a set of small metal hinges that I used for the prototype, but no idea where or when I bought the originals so I designed these hinges in Fusion 360. The…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
A door hook that is simple, strong, elegant and quick to print. Easily holds 10kg (tested with PLA). Print time is 19 minutes and only uses 3g of filament. Hooks in the photo are printed with Prusa silver PLA (the one that comes with your…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Intro A simple cap that changes your mobile phone (or any other LED torch) into a CAMPING LIGHT . The design was inspired by Japanese paper lamps . The cap was designed as simple as possible , so it may be used in the most flexible way.…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
VERSION 2.8 UPDATES: Added two new covers which have the digit market tiled 1 over, just print one of each of the left and right versions and follow assembly as normal! (Thanks to prusaprinters user Hellfish for the suggestion) This is a…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
Introducing the Cherry MX Compatible Flat Top Keycap, the 3D printed keycap that makes typing a whole lot more fun! With its sleek and stylish flat top design, this keycap is the perfect way to add a personal touch to your keyboard.…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This super simple ghosting test takes <1hr to print using the correct settings. The included .3mf file is set up with the optimal settings for a fast print. If you want to slice this yourself, set the external perimeter (or outer wall)…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
A simple small print (takes about 10 minutes) of a small tool used to clean dirt and lint out of the charging port of your phone. If you're like me and keep your phone in your pocket, the charging port is inevitably going to catch some…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Simple stand that blends in well with the real Rubik brand stands. Feel free to customize or add text to the blank spaces.
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
A simple organic chemistry stencil, intended for those learning about skeletal form of representing organic chemistry structures. The stencil is small, and prints very quickly, using minimal material. I intentionally did not include…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15% Printer Brand: Prusa Printer: MK4 Filament: Prusament PETG Signal White, Jet Black
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for PETGSource material: PET
I made this quick and easy USB Case to use and remix it into way more interresting Cases. I used this USB Sticks from Amazon because it is a widespread model and easy to take apart. I look forward to see your remixes and will add some…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Just a really simple print I like to run with new filament. Takes about 15 minutes and I simply use a sharpie to label them.
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Adapter for Bic pencil with old style of pen to write Recommendations: Print with layer height 0.10mm Activate raft to avoid Glue both pieces together with craft glue Gcode is for MK3 printer, generic PLA and layer 0.10mm, brim 3mm…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
3D-printed wall-mounted holder with a two-part design. The holder consists of a U-shaped base that is attached to the wall and a insertable component with two holes for screws or bolts. The insert pieces are made to slide into the base…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Motivation A while ago I published a pretty cool bottle opener gun which did win the Bottle Opener Contest. It Features accessory rails to mount lasers, flashlights or sights. However I was not able to find commercially available…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Fairly simple Gunpla Tool Holder I made to keep on my desk behind my keyboard. Edges are rounded a bit to keep from chewing your fingers up when reaching for things. 2x Slots for Tamiya Panel Liners (40ml) or Small parts trays. 1x Large…
Print approx. €12.25–€14.97 excl. taxPreliminary estimate for one variant
I used the next settings : -15% filling -0.15mm quality layer height - support on tray only
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
Prints very easily in vase mode :) Any material you want Happy printing!
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
A simple, yet effective garden spike to write the name of the plant on. I found that 1.2mm is a good width to make the spikes strong, yet flexible. Adjust as you like. You can print about 10 spikes in 1:20 with a layer hight of 0.20mm.…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET
Lamp shade for E27 lamp socket. Please only use with LED light.
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for one variant
I bought a pack of 8 of these hygrometers for a filament dry-box storage project and had few left over. I wanted to have one of the leftovers out next to the dry-boxes to show the difference between inside them vs outside. So this is a…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
A small simple ocean giant for the bathtub But it's also great fun to play on dry land. Print instructions The first 30 layers should be printed with 50% infill, the rest with 15%. It should just get easier upwards. On the ground, you…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
It is a very simple to print but also useful stand for your phone or tablet. Phone compartments are 9mm wide. If your phone is thicker, you can enlarge it and print it accordingly.
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Designed this simple cover for Meanwell LRS-75-12 model but should work for 24V model as well. Fast and easy print. Protects the terminals from the top, but shouldn't interfere with the wires themselves. You can print it at 0.3 (Draft)…
Print approx. €1.08–€1.33 excl. taxPreliminary estimate for one variant
This model is designed to print quickly. I love design which use minimal time and material. Size is for 4, 6, 8, 10, 12 pcs batteries. Depleted batteries could be stored upside down to identify them from those already charged and ready…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
the strength and quality of the model is sufficient for children. It passed the kids' stress test Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Red and Black Filament material:PLA…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
If you need a simple to print and easy to fit pipe cover, this might be what you are looking for. The hole is set to fit 15mm pipes. CAD (fusion360) file is included to allow you to customise. Print two to create a single pipe cover - For…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Simple classic tent tensioner. Designed for a 4mm rope. Print instructions No supports needed. Tested with PETG Resolution 0.2 mm Infill 50%
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
This part is a flat compass. That's right! You don't need a compass. The way this works is that you need pencils. One pencil starts at the center, and the other at wherever you want to specify your radius. To specify your radius, there is…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Easy print - no supports needed. Gcode prints two as in the picture. I printed it at .15 you you could easily do it at .3. A little bit of CA glue to assemble.
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for one variant
If you need a simple to print and easy to fit pipe cover and want a parametric CAD file as well, this might be what you are looking for. I have made this CAD design (Fusion360) parametric for easier adjustment, such as hole size - plate…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Simple 12 slot SFP holder. I had a bunch of SFP's just laying around and wanted an easy way to store them a little more organized.
Print approx. €3.86–€4.71 excl. taxPreliminary estimate for one variant
Simple stand for light bulb. It is designed for an e27 socket / bulbholder with 40mm in outer diameter.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
If you print it bigger, you will get better results. I scaled it the smallest possible way according to my needs. So scale it to at least 150%. Be careful with your hot gun. There are a lot of fine details. They could just fall down.
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
This will print best using supports, but it doesn't need a lot. I recommend these settings: Perimeters: 2 Infill: 15% Rectilinear (first 13mm) 15% Lightning (everywhere else) Supports: 35 degree overhang using Organic supports For extra…
Print approx. €6.28–€7.68 excl. taxPreliminary estimate for one variant
This is a reaaallly simple spatula you can use for whatever you like. Easy and fast to print with any material you have at hand. Made this quickly for my wife in need of mixing some components for her crafting project… Feel free to resize…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
This is a (by far) the simplest AA storage box designed for rapid printing. it fits 36 AA batteries with ease of access. It's designed for rapid printing (0.6 nozzle) with appropriate wall thickness to match 2 perimeters with the…
Print approx. €5.01–€6.12 excl. taxPreliminary estimate for PETGSource material: PET
A simple hook. I used it on a 15 mm copper pipe. Its holds up very well, after 6 months of use it has not shown a sign of weakness.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Thermometer: https://www.ebay.com/itm/384519105434?hash=item59871feb9a:g:NEEAAOSwj8xhnLcx
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
This hanger allows you to hang your echo dot 3 on the wall to save space. It can be fixed on wall with a single nail that is around 2mm diameter, 20mm long, and 5mm head diameter.
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
A Christmas themed plant pot for a cozy Christmas time! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
inspired by an old set of tokens I had found on this site. https://www.thingiverse.com/thing:2591952 I found that the readability was not that great on some numbers. I decided to make a simple token with easier readability as well as…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Simple Plant Saucers
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for one variant
This was built around Craftsman tools but should work fine for other analogous brands by adjusting the parametric file. Print Settings .6mm nozzle at .32mm layer height. 3 perimeters for both vertical, top, and bottom. (Go higher for more…
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
Universal stand for brochures or leaflets size 10x21cm. PLA/PETG Layer 0.2 mm No support Jednoduchý a univerzální držák na letáky a brožury velikosti 10x21cm Materiál PLA/PETG Výška vrstvy 0.2 mm Bez podpor
Print approx. €7.80–€9.53 excl. taxPreliminary estimate for one variant
Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
Simple Bottleopener, PLA, no coin or insert required, G-Code for Prusa i3 mk3S+ is added. Lasts quite a while even without a metal insert.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
I wanted a simple holder that would move my webcam up and down with Z axis. I couldn't find one that I liked so I decided to model my own. I used Solidworks 2019 student / maker edition and this came out. I used 3 zip-ties to hold the…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Print directions | PETG material recommended but any material works fine, recommend 0.2 mm layer height or less for smoothest results on the angled edge. Easy print, no supports required.
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
You should rotate the model 90deg to avoid mass usage of supports.
Print approx. €4.47–€5.47 excl. taxPreliminary estimate for one variant
*DISCLAIMER: This is a Work In Progress Project, so STL can change I want also to thank Perinski for the idea of the design of case, which is simple and it inspired my design, I suggest you to watch his designs on the following page:…
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
/!\ This is a concept, work in progres /!\ Edit 9/03/2026: V2 available here: https://www.printables.com/model/1632023-v2-multi-material-kept-simple By printing this set of part and adding the special toolchange Gcode in your slicer you…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
I was looking for a really simple trolley coin without any text on it and then came up with this design. After fiddling around with printed models I figured the hole in its middle is pretty neat because it reduces the amount of filament…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Por la forma distinta del montaje de la Genius a la Sidewinder. Hice este portabobinas simple a base de los existentes para los que tienen la genius como yo.
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
Just a simple, quick holder for Hakko soldering iron tips. Printed with PETG, no supports. Easy-peasy. The case is non-magnetic, so some double-stick tape is needed for mounting. There's a flat spot on the back for that.
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
As there seems to be some sort of ghost in my office who steals my rulers, I always need a ruler, but never have one. So heres a quick print for a 14cm Ruler (15cm total) which prints in 16 mins. Ideally you want to print the numbers in a…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Simple Playdate stand. The bump rests in the headphone jack for support, and allows the face of the Playdate to remain uncovered. Designed to be small so as to use little material and print fairly quickly. The attached gcode is with the…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
The .stl file is included so you could slice the staples in any quantity and size. My recommendation is to print the staple in black and then paint it as needed. Could be included in Prosthetics, Costumes and manny more things. The…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
This is meant to connect the divider panels in the original model. The length is not long enough for a typical bag so, instead, I printed three panels and four rods. The middle panel has a rod inserted half way from both sides. It's…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
these are simple 5mm diameter pins i made for my girlfriends desk shelves to replace lost pins during a move. can be rotated to improve strength if need be.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Heyya all, So, this is my first attempt at making a movable 3d print so it's not perfect. I made it have End caps for the movable parts so it should be gluten-free, but I'm not 100% sure about the fit. this should be like a little really…
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for one variant
Simple parametric scoop which you can adjust for you own needs. Files You can find the .f3d file for parametric adjustments in the Fusion360 directory. The STL directory contains multiple version of the scoop with different sizes. For the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A very simple RS-25 Rocket Engine I made like 2 years ago. I don't care if you use it, just credit.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
MK2 A simple 'pull-out' compact poo bag holder that can be used whilst wearing gloves. For poobag reels upto 32mm diameter and 65mm long. MK2 changes. The bag holder has a coarse screw thread removeable end. The screw-thread end is…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for PETGSource material: PET
Simple spiral vase - printed in vase mode. Used some rainbow PLA from Sunlu. Fast print about 2 hours.
Print approx. €2.59–€3.16 excl. taxPreliminary estimate for PETGSource material: PET
Check out Never Gonna Give You Up QR Code → here ← Dimensions: --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Simple Automatic Nozzle Cleaner If you have some out-of-print area on your print-bed then a very simple automatic Nozzle Cleaner solution is presented here for you. An out-of-print area, is an area, which normally will not be visited by…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
A simple magazine holder for glock magazines with Molle support. Can be used for a plate carrier or simply in the pocket if equipped with Molle. Printed with PETG... as seen in the model a reinforcement in the area of the Molle clips on…
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for PETGSource material: PET
I made these for an other project, they are @cm long each and can be joined to other linkages.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Yet Another Clock? My daughter needed a simple practice clock for school on a short notice. I did not like any of the models I could find on Printables, so I created my own. Better than going to the shops! Advantages: Quite thin plate =>…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Originally made to replace a broken clasp, but you can attach anything with small straps with this model.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is a model of a key hanger. The hanger is very simple, and as such, it will match any interior decor. Thanks to the holes, it can easily be hung on the wall. If you want to avoid drilling, you can use double-sided tape. This is the…
Print approx. €6.43–€7.85 excl. taxPreliminary estimate for one variant
For spools with a 20cm outer diameter. Printable without supports. Fits on the bed of the MK3, just rotate it. Printed mine with a layer height of 0.3, which took about 4h on the MK3.
Print approx. €5.83–€7.12 excl. taxPreliminary estimate for one variant
frameX - simple picture frame that can be used universaly, both landscape and portrait mode for 10 x 15 cm pictures printable with PLA with no supports, .gcode file provided for MK3S 3D printer
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
A simple soap tray for my Dr Squatch soap Added gcode, just I printed it with Prusament PETG
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for PETGSource material: PET
Simple battery holder for storage of twenty (20) CR1220 coin cell batteries, commonly used in keychain flashlights, digital camera RTCs, and other small electronics. One of a series of battery holders I've created and shared here on…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Jednoduchá váza Jednoduchý model vázy, např. na umělé květiny, nebo tužky. Model má stěnu, ale je možnost jej tisknout v režimu “spirálová váza”. Materiál: PLA Tiskárna: Ender 3 V2 neo Výška vrstvy: 0,2 mm Infill: 15% nebo 0% ( vase mode…
Print approx. €1.52–€1.85 excl. taxPreliminary estimate for one variant
This calibration cube has a chamfer on the edges and no letters on the sides. Advantage is, that you can precisely measure it with a caliper. After the print you have to write the axis on it with a pen. Size is 20 mm by 20 mm by 20 mm.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
A jig to wrap cords around and keep them in place.
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
I print it in two colours . It is not perfect. not yet.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This small container is designed to hold 7 pills for one week labeled with the weekdays in english or german language. You can see through the letters to see, what is used and what has to come. I printed it with: 2 bottomlayer 3 toplayers…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Simple cone. It is printed flat and assembled with cable tie. It can be used to mark a course or track. I also use these cones to mark tent pegs and to protect myself from tripping over them. Jednoduchý kužel. Tiskne se naplacato,…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
By accident created a nice little crankshaft mechanism. With very little cleanup, mostly the brim, and a careful rotation of the parts, it works. It is one print, no support material or anything else.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Use the threaded holes and studs to measure thread sizes on screws and nuts. Has the following thread sizes available: English coarse thread sizes: 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13 English fine thread sizes: 14-28, 5/16-24,…
Print approx. €3.97–€4.85 excl. taxPreliminary estimate for one variant
Print a red leaf and a black top , put it together with a green filament And now a geen leaf, glue it Or put a pin on it for a lapel on jacket If you like it , give me a like.
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Simple Nested Cubes, a stunning geometric sculpture crafted in a "print in place" design. With dimensions of 75x75x75 mm, this model is…
Print approx. €4.61–€5.63 excl. taxPreliminary estimate for one variant
Compact Electrical Junction Box for WAGO 221 (or similar) Connectors This is a 3D printable model of a compact junction box designed for the neat and safe enclosure of wire connections using lever connectors, such as the popular WAGO 221…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Buttons Size (Diameter) 11 mm 15 mm 19 mm 23 mm 27 mm Exciting combinations can be created with layer height and z-layer color change. Print Settings Material: Gembird - Black Pla Plus / Prusament Gentleman's Gray - Spectrum Rusty Copper…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
It's the STL Version of Model: 792989 It originaly was a 3mf and can't be sliced and printed on every printer. Now: Converted via Orca slicer to STL sliced for Anycubic Kobra 2 Plus in Highspeed with PLA ----- Es handelt sich schlichtweg…
Print approx. €15.05–€18.39 excl. taxPreliminary estimate for one variant
Simple stand for Gloomhaven paper miniature 25mm diameter 2mm high works standalone or fits into Numbered Miniature Base Markers from Robagon https://www.thingiverse.com/thing:2872339
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
![Simple Parametric Drill Holder [No Supports]](https://media.printables.com/media/prints/647502/images/5117114_ae712046-2bb2-4ee9-b58c-256a02c0928e_ea100415-6e00-49d6-ad56-c15068b2ea01/img_20231115_132147.jpg)
