4,171 models
See latest version, v3.0: https://www.printables.com/model/959686-7-segment-mechanical-counter-version-30-ratchet-fo Version 2.2 of the 7-Segment mechanical counter. Improved design. This particular model is a sequential counter (numbers…
A lightweight Key Organzier: Prevent key scratches on your phone or wallet Easy to use with one hand : push keys out with index finger and select the key you need. Perfect when carrying stuff. Customizable in slicer to fit your amount of…
Intro I was looking for a flexi-cat for giving it as a present to a cat lover, and I could not find a single-color one, so I took the Mult-color Flexi Cat by K7ZPj and adapted it to be printed using my Prusa Mini+. The original author is…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
- Prusa Print files added! - Presenting you: my iteration of a Roll up Chess set! Please like, share, download, rate and all the amazing good stuff :) I have seen many roll-up chess models, but none that would fit my needs. What I really…
Update : Prusa mini 3mf added. Spider-Man wall or door decoration, models are available in both print color and multimaterial. Print instructions All files are preconfigured for Prusa Slicer just press slice and the filament changes will…
(for Bambu, check below) Please like, share, download and all the amazing good stuff! Since this is my final model in my "Single Extruder - Dual Color" series where I managed to put 3 colors together into one model! Not counting the…
Size: 55mm x 69mm x 43mm Filaments: PLA Jet Black (black) and PLA Vanila White (white) Note: Some parts of the model may need to be glued. Organic support recommended.
Size: 61mm x 47mm x 42mm Filaments: PLA Prusa Orange (orange) and PLA Vanila White (white) Note: All parts need to be glued.
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…
A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes . The STLs for three different sizes of each style are included here for convenient printing. This model is fully…
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…
What colors will you choose? Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. In the end I decided to try and model my…
Scale Sized Bowling Pin Printing Instructions You can achieve the same print without a MM printer by using PrusaSlicer and adding filament changes on the Single model. See screenshot. Versions v2: Added unified stripe STL Reduced print…
Once upon a time, I printed this: Cat Ears for Headphones by usernamexx - Thingiverse Today it broke :( So I designed my own to improve upon the design. What makes these better in my opinion is that it prints in a single part and is hence…
After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up . This was…
This is an relatively Easy Print to give your Telecaster a personal touch :) Design is made for a single material printer. However you can create special effects if you are printing without bottom/top Layers, just with the many…
Size: 44mm x 112mm x 92,5mm Filaments: PLA Simply Green (Outer) and PLA Marble Grey (Inner)
Two types of Modern Vases Size: 99mm x 99mm x 135mm Filaments: PLA Jet Black (Outer) and PLA Blend Viva La Bronze (Inner)
Need: Lens cap that can help prevent scratches and excess dust on the front element. This is my take on a solution to that need. This design uses common springs found in ball point pens. The spring dimensions are 4.5mm Diameter and 18mm…
This is a single extruder variant of my second articulating dragon design, the dual colour version is also pictured above. It includes a few improvements over My original dragon ( Rupee the Articulated Dragon ) including improved…
Needed a hard case for playing cards that would protect cards from damage better than the cardboard box that cards are stored in. Prints with NO SUPPORT and the lid easily snaps on the box in PLA. Let me know if you try other materials.…
Modification of 5-reel spool holder on Prusa Printer Enclosure v2 to just one reel, for users who want the V2 enclosure but don't have the MMU system installed. This is a modification of the spool holder in the V2 enclosure files…
A simple remix into a “coin” shape of Ceji3D 's Demon Slayer visualizer model. The model has been scaled up in size from the original, and the text/elements rearranged within so that they stack on top of the "coin" to allow multicolor…
Christmas tree ornament. 8 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 100 g).
Recommended printing settings (or download gcode): Infill: 80%+ Brim = enabled Supports = Everywhere Orientation: see image This 3D-printed sawtooth frame hook is designed to provide a secure and stylish way to hang your artwork using…
I got tired of reaching down to the floor to find my cable everytime i wanted to charge my phone in bed, so i made a cable clip so that it's always attached to my nightstand. Been using it for one month before this upload with no…
Size: 82mm x 52mm x 41mm Filaments: PLA Blend Viva La Bronze (gold), PLA Vanila White (white) and Silk PLA+ Rainbow 02 (shiny) Note: All parts need to be glued.
Using under 5m of Filament, and printing in less than 90min, this is a perfect little gift card box you can quickly print while you're getting ready to go to that party. It's formed by a base, lid, and “ribbon” which neatly fits around…
Easy to print medals to celebrate first, second and third place. Possible to do color change to emphasize the numbers on the medals. I used Oh my Gold, Galaxy Silver and Viva la Bronze (all PLA) for the different medals on 0,2mm Quality…
Changing colors between layers is a known and easy to use feature in Prusaslicer. If you want to change filament within one layer you usually need the MMU. But with virtual extruders and some prearrangements in the model and slicer, this…
This is a remix of Kai's Octagon Box Mount merged with hadigar's U6 Lite replacement mounting plate. Simplifies CamS' solution into a single printed item (no additional screw required). The standoffs for the octagon box have been removed…
V2 is updated to include 10Lb and 5Lb weights, a chamfered edge to make it easier to tell edge to edge plates apart, improved fit tolerances, and a bar with integrated gripping hands. Per izkariot_438646 's suggestion, I've also added a…
The STL file is very small, you can size it for any printer. I have already added the filament changes to the 3mf file for the MK3s+, but if you resize it you will need to change the height of the filament changes.
Info: just a fun simple hexa tile, but with a road on it, which can be random even when this is only from a single tile contains also bridges Print info: 0.1mm layers for better road bridging
It's a tiny clothespin, but as a single part and print-in-place. It uses a ‘snake-bite' to hold material together because it doesn't have any extra force pushing the clamp closed. The force is much less then you'd get from a clothespin…
Single kitchen utensil rest. Material: PLA, PET-G, ABS etc, Layer high: 0,2 or lower Supports needed
Had trouble finding a model for a single walled hexagonal tube that I wanted to use to creature some shrimp hides, so threw one together in 5 minutes, hopefully this will save someone else 5 minutes. Model measures: X - 41mm Y - 36mm Z -…
A simple to print dual color On Air warning sign. Just swap the filament color and have a dual color print. The combination of colours is yours to choose. The base is printed in a single colour, black, has 4 holes on the back for easy…
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
Remix of the Toothbrush Stand for single Toothbrush Head
Hello Printables Maker, this is another model from the series Cherry Blossom Bookmark I hope you like it! "Cherry Blossom Bookmark - Single Flowers" I am a new designer with an ever growing model base. I am now trying to gain a foothold…
No supports needed, but you will have to poke out a single layer that I used for the inset m3 screw heads. Requires Four M3x10 screws to hold it together. This is a holder for those single 18650 holder and protection boards that also…
This vent cover is for a 4" thin wall pvc (sewer pipe) used as an airduct. (NOTE!! This will not fit schedule 40 PVC unless you modify the size of the file when slicing!) It will also fit sheet metal duct if you use the crimped end of the…
Are you tired of having your Kraft Singles go everywhere all over your fridge? With this you can load up a standard Kraft singles pack (24 Slices), Have easy access to them from the sides, and keep them all together. Used PLA .02mm layer…
This version of the original "Buddy the Pug" by Josef Prusa is modified to be printed in two parts, giving you the opportunity to add some color and make Buddy even cuter! The model is split into two sections: one for the main body and…
This two Ozito battery holders are a result of printing the original file only to find that the double holder does not accommodate two 18V PXC batteries side by side. I printed the original make on my Voxelab Aquilia X2 with the model…
Filament change at 2,2mm 3,2mm 4,2mm Start with black 2,2mm change to yellow 3,2mm change to white 4,2mm change to red You can of course slice it also for other printer models
Be sure to print with color change to get multiple colors. Also if you want to modify the OpenSCAD file for lucky the leprechaun be sure to get the PNG from the photos section. (Posted to reddit as /u/NoveltyAccountHater ).
Remix of Osfald's model to adjust it for a slightly different shape of 12mm square contacts. See photo. The model is otherwise unchanged, and it fits and holds a single AA battery very nicely. The contacts slide through the bottom of the…
Size: 82mm x 52mm x 41mm Filaments: PLA Jet Black (black) and PLA Vanila White (white) Note: All parts need to be glued.
Mit diesem Puck kann die Single (kleine Schallplatten mit dem grossen mittelloch) ganz easy vom Plattenteller anheben ! Motivation: Das berühren der Schallrillen mit den Fingern sollte möglichst vermieden werden. Deshalb hab ich diesen…
I wanted to create a Pokemon-themed checkers piece for a gift and came across the mandalorian checker piece by nat_a_cyborg and really loved the textured outer ring they used on their design. So I started with their design and removed all…
Overview Inspired by the "dual color, one-extruder" contest, I designed this model in Fusion 360 with a fun passthrough mounting. You can use this model as money box or pencil cup : as you want ! Printing Printed with 0,4 nozzle, 0,2 mm…
Easy to print, do filament change at top of each top layer. .gcode has pauses, but if you slice the .stl add a pause at the top of each top layer. I put ½" magnet tape on the back to convert to a fridge magnet.
For 7" vinyl records, there are a lot of stands or holders. This one is for the smaller 7-inch single records, mainly 45 1/min speed. Update: File-updates, optimized & fixed some issues with the support. Settings Value Infill 15%…
Segnaposto che diventa una decorazione per albero di natale (è presente un foro per far passare un gancetto o un filo sottile ed appendere all'albero di natale) realizzata con stampante 3d a singolo ugello mediante stampa inversa. Per…
A simple wall mount for holding 4 spools of filament using 3/4"x12" craft dowels. Craft dowels are secured in place with a #6x3/4" drywall screw. Recommended to mount to stud due to weight of four spools.…
This stand can hold APX 6000's, APX 7000's, and APX 8000's. No supports or raft needed. Infill is 15%.
Eureka Mignon Fork Remix Upgrade your Eureka Mignon grinder with this custom fork designed for use with a tilted bed in single-dosing operations. This remix of TrafficBroker's original design ensures a secure and precise fit for…
It makes your toothbrush really stable and catches all the water. I recommend printing it with 4 perimeters for rigidity. I printed mine in deep black to match my toothbrush. #Printables
Love Letter Favor Token — 3D-Printed Replacement (Single-Color) A clean, durable single-color replacement for the Love Letter favor/affection token. Prints fast, stacks neatly, and upgrades table presence without needing color swaps or…
Yet Another 18650 Case? Well, yes. This one is special compared to the others on Printables in one respect: it uses inset metallic AA contacts (spring/plate) to help avoid soldering. Also, it has a variant that is specifically designed…
Fits ok- great to print in flame suppressing material
magazine is loaded from left side
Keypad for a single switch. I will use it as a power button for my pc.
This is First layer test for the Original Prusa XL Single Tool 360 X 360 X 0.2 MM Available for Gcodes for PLA & PETG
Something I have wished was produced but have never found anything like it. I needed a way to neatly connect 25x16mm self adhesive trunking to a single UK pattress so I could relocate a light switch in my workshop without having to chase…
Christmas Card Reindeer (singe extruder print) Multicolor by layers: White (I use fluorescent white) Red Black Take an ornament for the Christmas tree from the postcard!
Printing Instructions Filiment Material Advised PETG Material Propaties Required Constancy Hard Durablity Not brittle but doesnt need to be up to much Sun Bleaching Protection As a practical long term use item if in sunlight PLA might not…
3d model of a Kraft brand Macaroni microwave dinner bowl, and a 3d printable lid that snap fits to the bowl. Intended to support waste reuse.
Ik vind het leuke spooltjes, hoe krijg ik die aan mijn Prusa i3 MK3S+ printer gehangen. Na redelijk wat tekenwerk paste het prefect. Om dat het zo klein is moet je wel heel voorzichtig zijn bij het plaatsen, de lipjes breken anders af. Er…
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
18v battery mount accepts taps for electrical connections and cable pass through to the side or bottom. Mountable with 4 screws. Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill…
A specialized version of Deal With It Glass that supports multi-color with 1 nozzle, giving the best-looking deal-with-it and also mini support. For mini owners: In order to get the multi-color via 1 nozzle it is important to run the…
I was curious if a fidget would have less friction without the bearings (as provided by a previous design). This design simply uses a v shape to keep the inner and ourter races together. It seems to have lower friction than the bearing…
Print the top and bottom of the sign, then put them together to get a multicolor sign!
Adapterset um Singles+LPs mit Luftlöffel Windantrieb als Partydeko/Gag zu betreiben.
The Multicoloured Christmas Bookmark is designed so that you can print it in two different colours with a single extruder printer. No supports needed I printed with 20% infill but shouldn't make a difference if you used less. I have…
Klagenfurt (Austria) - coat of arms 3d model multi-colour for single filament printers. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating pins are NOT printed.…
Dimensions (LxWxH) 132 x 150 x 32mm (100% scale) Basic information The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. The model is is split into 6 movable parts: a shell, which serves…
The source marked this model as adult content.
Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…
Version 3.0 of the 7-Segment mechanical counter. Improved design. This particular model is a sequential counter (numbers 0 - 9) that receives a linear input to cycle the display. This version was designed and prototyped using the Bambu…
Designed to be compatible with Cherry MX style key switches. Just add one of those, a key cap, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only overhangs are inside the hole where the…
Dimensions (LxWxH) 170 x 96 x 65mm (100% scale) Basic information After multiple requests, I've decided to revisit my previously uploaded Orca design, and articulate it. Unfortunately Mattes beat me to it, and has already uploaded an Orca…
This parametric box has been redesigned from the ground up to fix the long-standing issues users were having while taking into account a couple of personal goals for design considerations. Fully 3D-Printed, no hardware needed! Flush hinge…
Update 17/09/2023 Added “HSW Ez-V1 Round Object Holder - 65mm Left” Update 29/04/2023 Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed…
This is the first design I made in my single extruder - dual color series. My final design is out right now and takes this principle to a whole new level: Single Extruder - TRIPLE Color - Sleepy Cat ! And now back to the cow This is a…
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The STL and AMF files are available for download on…
Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…
Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of ribs (depending on the size of the ball): 10, 14, 18 and 22. Rib width 3 mm. Print the bottom part with a support so that the curve…
This model is the old version. The new model with improved printability and enhanced accuracy is here! https://makerworld.com/en/models/570404 If you wish to sell prints from Manabun Lab, please refer to this.…
Thanx to the fantastic work by DeSteiner (as well as his help in making the custom text), I was inspired to make a few custom parts for his prop revolver. All parts have been test printed, and will have the same fit as the original parts…
I needed somewhere to store my mini-Creeper and Anatomy army, so a Minecraft Chest seemed like the perfect solution. The two halves of the chest are connected by inserting a piece of 1.75mm filament into the back hinge. You can add a dab…
The source marked this model as adult content.
Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…
![7" Vinyl Single Rack [update]](https://media.printables.com/media/prints/896104/images/6856006_6f731b92-2498-4e19-b5d4-0b294a4bfb9a_86055795-4c3e-4e96-93db-806aadcfbebd/pxl_20240529_vinylsinglestand.jpg)
