Search results: slanted

Sort order

123 models

P
Printablesbuchnema

Spout with Vent - Slanted Canister

This is a canister spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for common 5 liter canisters you can find in European retail markets for distilled…

Downloads
764
Likes
167
Rating
5
P
PrintablesGCV3D

Woven Slanted Bin

Overview This is my first attempt at designing and printing the illusion of a woven basket by using alternating and overlapping patterned sweeps in two directions. I was pretty conservative with this design, as can be seen from the solid…

Downloads
54
Likes
24
Rating
0
P
Printablespjvenda

Custom Nespresso Capsule Dispenser MOD - wider/slanted top entry section

After using this (excellent!!) Nespresso capsule dispenser for months and loving it, I found myself wishing a slightly different “entry point” for the sleeves at the top of the dispenser.: When opening the sleeves, there's usually 2 small…

Downloads
54
Likes
6
Rating
5
P
PrintablesSpool Designs

Slanted Magnetic Knife Block - Single and Multi-Material

Slanted Magnetic Knife Block - Single and Multi-Material Holds up to 8" knives (on top layer). Uses 10 10mmx2mm magnets like these . Printing Requires a larger print bed (mk3s works). If printing at .2mm, pauses at the following for…

Downloads
53
Likes
13
Rating
0
P
PrintablesModMonster

Gridfinity Slanted Pen / Pencil Holders

There are two variations of this model, one which is 1x3 Gridfinity units and can hold 3 pens / pencils, and one which is 2 units wide and can hold 6 of your favourite writing utensils. The slots for the pens are 11mm which I found to…

Downloads
42
Likes
3
Rating
5
P
PrintablesJirkaDe

slanted PC4-M6 tube adapter

Extra parts: 1x PC4-M6 tube connector 2x DIN 562 M3 square nut 2x DIN 912 M3x8 screw a bit of silicone caulk Notes: Use 6.5 mm drill bit for the center hole and 3.5 mm drill bit for the other two holes. Overfill the pocket around the…

Downloads
37
Likes
6
Rating
5
P
Printablesiqless

Slanted Thread Pen Cup Holder

A simple Slanted Threaded pen holder printed in two pieces and threaded together :) Printed in PLA at 0.15 layer height just fine

Downloads
31
Likes
5
Rating
0
P
PrintablesLUC4SB

Slanted Coaster / Zešikmená podložka (Catler Porto)

A slanted coaster in a shape of grille for use under a larger cup in Catler Porto capsule coffe machine. Compatible with: ES 700 PORTO BG ES 701 PORTO BH ES 702 PORTO W ES 703 PORTO B ES 720 PORTO W ES 721 PORTO B The coaster has a slight…

Downloads
16
Likes
2
Rating
0
P
Printablesmado30

MacBook 15" slanted pad with ventilation slots

So that the fan doesn't run so often on the MacBook 15", I designed and printed out this slanted pad with ventilation slots. Since then, the fan starts much less often. Since it was too big for my MK3S+ to print it all at once, I printed…

Downloads
14
Likes
1
Rating
0
P
Printablesparticleflux

Snapmaker Enclosure internal filament guide with slanted countersunk screws

The filament guide by Tiwa346 with different screw holes

Downloads
12
Likes
1
Rating
0
P
PrintablesORM

Gridfinity bin with a slanted label

I wanted a bin where the label was easy to read even from the front. So I made these. Apart from the fact that the design of the label lip prevents other units from being stacked on top of the bins, the dimensions of the bins are in…

Downloads
6,517
Likes
1,052
Rating
4.95
P
PrintablesLikkleidiot

Skadis slanted 5 sectioned container

This design is a streamlined, slanted 5 segmented container(4 back and 1 large front), tailored for the Ikea Skadis board. The dimensions are 230mm in length by 115mm in width, with a height of 120mm sloping down to 50mm at the front. the…

Downloads
1,343
Likes
417
Rating
5
P
Printablesdesignx-lab.com

Slanted Pen and Sticky Note Holder - designx-lab.com

Slanted Pen and Sticky Note Holder Keep your desk organized and stylish with this 3D-printed Slanted Pen and Sticky Note Holder. Featuring a minimalist design, it combines a slanted pen cup and a holder for sticky notes, perfect for any…

Downloads
987
Likes
247
Rating
5
P
Printablesstew675

Slanted PEI Scrubber Plate Holder for Qidi Plus 4

An easy to print replacement PEI nozzle cleaning plate holder for the Qidi Plus 4 Introduction The stock PEI holder allows the nozzle to collide heavily with the edge of the PEI plate. Most of the times the printer handles this okay, but…

Downloads
604
Likes
115
Rating
4.67
P
PrintablesWaschtl

Gridfinity slanted bins

This design is blatantly copied from Machenna56k's and his “ Tiered Gridfinity Bins ”. I made the entire thing myself using this Gridfinity Addon for Fuson360 . V11 Update 17.03.2023: Added snap-fit Lid that can be printed in Vasemode.…

Downloads
554
Likes
172
Rating
5
P
PrintablesN8thin

X-Shot Pro Fury X Slanted Grip

This is slanted grip piece for the X-Shot Pro Fury X that attached via the rail on the bottom. It should be just slide-on friction fit, but the tolerances are funky, so I've also provided the .step file in case you need to adjust it.…

Downloads
545
Likes
96
Rating
4.67
P
PrintablesUPWDesign

Mini Slanted Talon Mag Holder, Belt and MOLLE (Nightingale magazine)

Toploadable Magazine holders for Mini Slanted Talon Mag (Nightingale magazine). Belt and MOLLE versions are provided. Key dimensions are based on Flygonial's original design. At the time of posting, the belt version has not been tested…

Downloads
441
Likes
78
Rating
5
P
PrintablesPaul Corbett

multiboard 150mm slanted 3 + 1 bin combo

Yet another bin for the multiboard system. There are 3 bins in the back row and a single bin in the front. It is secured with 3 of the big thread bolts. Designed in onshape.

Downloads
246
Likes
41
Rating
5
P
PrintablesLikkleidiot

Skadis slanted 8 sectioned container

This design is a streamlined, slanted 8 segmented container tailored for the Ikea Skadis board. The dimensions are 230mm in length by 60mm in width, with a height of 90mm sloping down to 50mm at the front. My initial prototype featured…

Downloads
185
Likes
45
Rating
5
P
PrintablesABlueMiata

1/24 Car Slanted Display Stand

A slanted 1/24 or 1/25 scale car display stand, to better display the undercarriage. You could put a mirror underneath as well for even better viewing. Category: Vehicles

Downloads
169
Likes
17
Rating
0
P
PrintablesSamik

Mini Slanted Talon Mag Holder, Belt (Nightingale, Venom Pro) Top-loadable Open

Remix of @upwdesign's, @flygonial's, etc designs because I really love the "open" remix for the full-size talons.

Downloads
153
Likes
44
Rating
0
P
Printablespasha.delaet

Dachschräge Lampe| Dachschrägeleuchte | slanted walls / ceilings lamp

Ever tried finding a lamp for a room with slanted ceilings (Dachschrägen)? Exactly — impossible! 😅 So i made one :) You will need: an E14 socket, an E14 bulb, four M5 heat-set inserts, four 5 mm M5 flat-head bolts electrical cable Angle -…

Downloads
153
Likes
136
Rating
4.5
P
PrintablesSebacho9

Gridfinity - slanted cutter holder x2

This holder holds 2 straight cutters at an angle so so that it fits in various drawers.

Downloads
145
Likes
20
Rating
5
P
PrintablesChungus

HSW Slanted Spray Paint Holder

Spray Paint holder for the hex wall organizer. HSW. Slanted to allow for stacking. Print with supports.

Downloads
140
Likes
20
Rating
5
P
PrintablesDesigning Mania

Simple Slanted Storage Box For Desks

Simple Slanted Pen Holder Storage Box For Desks, Comment for improvement!!

Downloads
140
Likes
56
Rating
5
P
PrintablesCrazy Creo

Slanted Storage Box

What kind of things do you want to put in it?

Downloads
136
Likes
15
Rating
0
P
PrintablesRhiz0Matics

Qidi Plus 4 Riser, Print friendly version with slanted front to match machine's lines

This riser, is base on the original but separates the frame parts from the riser parts, so that it can be printed without supports and be assembled after printing. This means there are significantly more parts. to print this: -open in…

Downloads
130
Likes
17
Rating
3
P
PrintablesItsumonotakumi

Slanted-hole Basket

This is simple and useful basket. Printing this basket requires relatively little filament, but it takes time. Previous my box is here. https://www.thingiverse.com/thing:4713230 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…

Downloads
115
Likes
17
Rating
5
P
PrintablesYangorang

Slanted U Hooks for 3" Slatwall

Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…

Downloads
114
Likes
16
Rating
0

Mid Century Modern Style Plant Stand With Slanted Legs

Designed a small plant stand to sit underneath my plant and on my dining table. Shouldn't need any support. I plan on printing the legs in two colors. Category: Outdoor & Garden

Downloads
112
Likes
28
Rating
0

Motu M2 Slanted Under Desk Mount

I wanted under desk mount for my Motu M2 audio interface. There are quite a few designs around, but most of them are not very precisely measured, so I designed my own. I have made it 30° to be more ergonomic, and the meters can be seen…

Downloads
110
Likes
15
Rating
5
P
PrintablesClinty76

Ryobi Vacuum extension slanted tip

This is a remix of @Beeks1996 Ryobi Vacuum Extension Nozzle I just changed the tip to help with the corners.

Downloads
103
Likes
14
Rating
5
P
PrintablesScott73

slanted usb storage brick

a simple usb storarge brick. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: .02 Infill: 20 Filament: any pla any Notes: Just a simple USB storage brick. Category: Computer

Downloads
99
Likes
5
Rating
0
P
PrintablesUPWDesign

Warp Saya Snap-on tensioning shim for Nightingale (Mini Slanted Talon)/Diana Mags

The tensioning shim snaps on/off and is retained when the mag holder is empty. Without modification, mags can be held in place if sayas are assembled tightly enough. Advise cutting an additional groove in smaller mags to match the…

Downloads
96
Likes
20
Rating
5
P
PrintablesMachineBlocks

Slanted Brick S1 - STL Generator - LEGO compatible

The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…

Downloads
93
Likes
20
Rating
5
P
PrintablesBill Kater

Slanted Socket Rack SAE and MM

*** SEE Edit Below *** I wanted something different from designs I have seen to hold my sockets in my toolbox. So I made this slanted socket rack. It fits nicely in the shallow drawers of my toolbox. And the slanted design makes it easy…

Downloads
90
Likes
33
Rating
0
P
PrintablesEvander1033

Slanted Trading Card Storage

I needed a Box that would fit Trading cards that are in standard top loaders, but would also allow me to flip through them as needed. Its pretty basic, I used Standard PLA at 20% Infill.

Downloads
90
Likes
15
Rating
5
P
PrintablesPaul Corbett

150mm Slanted 3 bin for multiboard.

150mm wide by 75mm deep with 3 slanted bins. The design was inspired by https://www.printables.com/model/849953, however, there are three holes to facilitate attachment to a tile in the multiboard organization system using the big thread,…

Downloads
80
Likes
12
Rating
0
P
PrintablesNicholas Clark

Plus4 Slanted PEI Wiper

I printed Stew's version and noticed the holes didn't quite line up to the stock Plus4 purge bucket assembly. The printed part was also quite wobbly and had very loose clearances with a well tuned machine. I noticed a lot of the printed…

Downloads
79
Likes
13
Rating
5
P
PrintablesIsak Hendrikse

Cabinet vents 60mm Fan and Rectangular vent, slanted to prevent rain

Needed vents for my power and networks box for my outside cameras as the equipment got to hot in the waterproof sealed boxes. Made the fan cover and rectangular vent with slanted fins to still keep water out. The first design with thin…

Downloads
77
Likes
13
Rating
0
P
PrintablesVector3dArt

Geometric Diamond Pot - Slanted Diamonds

Geometric Slanted Diamonds Style Pot. A star shaped pot with a geometric slanted diamond effect on the sides. The pot is designed to be a simple and easy print with no supports required. This pot can be used as a plant pot, flower pot,…

Downloads
76
Likes
13
Rating
0
P
Printablestavdog

Lilygo T-Display S3 Slanted enclosure

Print main enclosure face down. Print back on it's back. The small buttons are print in place so be careful not to lose them. The board should be glued in with a small amount of glue. The model is publicly available in onshape.com…

Downloads
76
Likes
3
Rating
0
P
PrintablesLloyd Keays

Parametric Shelf for angled walls (slanted roof for example)

It's a brace and its shelf that is build to fit a slanted wall. In my case, it's an old house with gables and I want shelf hanging from the gables. Note that by the nature of this, there's not much room on the shelf :) The file "Angled…

Downloads
74
Likes
12
Rating
0
P
PrintablesMeyui

Slanted Remote Control Holder - Desk Organizer

ARCIVE presents a refined evolution of the remote stand, defined by a curved upper surface that merges seamlessly into a softened, continuous silhouette . The overall geometry retains its signature slanted profile , intentionally angled…

Downloads
66
Likes
15
Rating
0
P
Printablesbill de_cat

Slanted / Angled Wall Shelf Bracket (15 degrees)

just make sure you have a way to secure the containers so they don't slide off

Downloads
58
Likes
6
Rating
0
P
PrintablesMachineBlocks

Slanted Brick S1.1 - STL Generator - LEGO compatible

The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…

Downloads
54
Likes
11
Rating
0
P
Printablesthall72
Downloads
53
Likes
15
Rating
0
P
PrintablesEdoras

Slanted 45 Degree Pencil Cup

I needed a good way to store a lot of pencils on my desk, but wanted it to not take up too much space. This model is designed to sit under a monitor. The 45 degree slant allows for easy access to pencils. The cutouts save time and…

Downloads
53
Likes
12
Rating
0
P
Printablesblechbude

Krawattenhalter schräg; necktie hanger slanted

Krawattenhalter mit schräg angeordneten Haken. Dadurch lassen sich die Muster und Farben der einzelnen Krawatten leichter überblicken. Für sechs oder 10 Krawatten. Die Ausführung für 10 Krawatten paßt bei einem Prusa MK4 diagonal auf das…

Downloads
52
Likes
7
Rating
5
P
PrintablesPaul Corbett

100mm Slanted bin for multiboard.

100mm wide by 75mm deep slanted bin for the multiboard organization system. The design was inspired by https://www.printables.com/model/849953, however, there are three holes to facilitate attachment to a multiboard tile using the big…

Downloads
52
Likes
8
Rating
0
P
PrintablesShizzon

Gridfinity silverware holders for Ikea drawers with slanted sides

Really liked the Gridfinity silverware holders from breese-2 . I have some Ikea small drawers and they all have a slanted edge that I wanted to utilize to maximize space. These drawers fit the gridfinity grid with just a tiny bit of…

Downloads
48
Likes
9
Rating
0
P
PrintablesAlluvian

Slanted deckbox for cards (sized for Clank + sunken treasures expansion)

This is a slanted deckbox I made for the cards in the boardgame Clank! and the Sunken treasures expansion. It fits all the adventure cards and the market cards. I keep the 4 starter decks in separate baggies so they are not made to fit in…

Downloads
48
Likes
11
Rating
0
P
PrintablesMachineBlocks

Slanted Brick S2.2.2.2 - STL Generator - LEGO compatible

The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…

Downloads
46
Likes
9
Rating
5
P
Printablesskaw

3D-corner, slanted

Need to join three beams to form the corners of a cube/frame/enclosure? This model is designed for 22mmx22mm square profiles, but can be scaled up or down according to your needs. It will hold them in a reasonably close to 90 degrees…

Downloads
45
Likes
5
Rating
0
P
PrintablesRvdk

Bauhaus tray - Slanted pen-attachement

Slanted penholder part for the ‘Bauhaus tray’ Remix designed by R_vdk, Credits to the original creator Printtime 26h 55min Weight 186.20 g Dimensions 170 x 114 x 40mm Application / Functions I needed a good desk organizer for my working…

Downloads
42
Likes
12
Rating
4
P
PrintablesMeyui

Slanted Desk Bin – Angled Desktop Container

Small items tend to pile up on the desk, often unnoticed, until they’re in the way. Slanted Desk Bin reframes the simple act of disposal with a tilted lid that makes the motion feel more natural and convenient . This updated version…

Downloads
41
Likes
10
Rating
0
P
Printablesbiketiger

SLANTED CUBE PUZZLE

Prints without supports. STL can be broken apart if you'd like to print in multi-colors. The finished puzzle is slanted, so the parts are not as easy to fit as you think.

Downloads
39
Likes
3
Rating
0
P
PrintablesAndrey

Slanted finned vase

Because it looks like it needs some air-cooling.

Downloads
37
Likes
7
Rating
0
P
PrintablesTheHamburglar

Slanted Desk Organizer

I wanted to fit organize the pens in my drawer, but when I found that regular desk organizers were too tall, I made this. The overhang angle is 30°, so it should be printable on most modern printers. I've included the parametric fusion360…

Downloads
37
Likes
5
Rating
0
P
PrintablesDJ

Slanted Humbucker Ring

The Pickup Rings are designed so the Pickup is parallel to the strings, when the Guitar's Top isn't. The Higher Frame goes from 8.3mm-7.4mm The Lower Frame goes from 6.7mm-5.8mm I printed them in Matte Black “Extrudr PLA NX2” with 0.05mm…

Downloads
35
Likes
7
Rating
0
P
PrintablesCozyCraftStudio

Modern Pen Holder - Sleek Slanted Organizer

The Honest Shelf // Vol. 78 🖋 Upgrade Your Space with the Perfect Slanted Organizer. A versatile, ribbed container designed for those who value clean lines and effortless organization. If You are interested of my other Designs, feel free…

Downloads
33
Likes
3
Rating
0
P
Printableszapta

Flashforge Creator Pro Slanted LCD Panel

I love my Flashforge Creator Pro except for one ergonomic problem, when I stand next to it I simply cannot see the display because it is too low and is vertical. I need either to step back or bend down. Not anymore. This design provide a…

Downloads
32
Likes
4
Rating
0
P
Printablesrellik

Slanted phone holder

I like watching things in bed. Trouble is when you enjoy to lay on your side, the phone can either be in portrait or landscape. With this stupid stand you can keep it on a 45 degree angle.

Downloads
32
Likes
5
Rating
0
P
Printableseyllew

Slanted Makeup & Cosmetic Organizer

A functional multi-compartment cosmetic and makeup organizer featuring a slanted ergonomic design. It tapers from 80 mm in the back for tall brushes and bottles down to 40 mm in the front for easy access to lipsticks, creams, and small…

Downloads
31
Likes
10
Rating
0
P
PrintablesQuickSolved

Picture frame hanger for slanted walls

secure method of hanging picture frames on a slanted wall. You will need 1 of each (Top, Right, Left). Secures onto 5mm thick screw with 8-15mm head, sticking out of the wall. mounts to the frame with 4mm thick screws that are 16-20mm long.

Downloads
29
Likes
7
Rating
0
P
PrintablesDaniel Kouba

Yamaha HS7 holder slanted

Holder for yamaha studio monitors angle 34.7 degree

Downloads
29
Likes
2
Rating
0
P
PrintablesFullyBaked 3D

Gridfinity Slanted Trench

This slanted trench is ideal for storing wide flat objects (keyboards, notebooks, etc.) in your Gridfinity storage. PLA No Supports

Downloads
28
Likes
5
Rating
0
P
PrintablesSmonkHappy

sprue support for slanted printing

A simple sprue wich you move to your model just so it touches it. If it doesnt fit you can easily cut and resize it to fit your model. I tested it on multiple large prints oriented at about 45 degrees and it saved me so much support…

Downloads
27
Likes
5
Rating
0
P
PrintablesCobaltDev

120mm to 92mm slanted fan adapter for CPU cooler

this adapter can adapt 120mm PC fan to 92mm CPU cooler fan mount. it is optimized for fan mounting clip for CPU cooler. print with material that has glass transition temperature higher than 80 deg c, like PETG, ABS.

Downloads
27
Likes
3
Rating
0
P
PrintablesAdam Adam

Simple slanted box

Dimensions: External: 75x75x110 (mm) Internal: 70x70 Printed with pla, 15% infill, but less should be fine as well. Use variable layer height at quality setting to get the best slant.

Downloads
26
Likes
2
Rating
0
P
PrintablesMilVetRetired

Slanted USB Storage

The slots are slanted downward by 10 degrees to help secure the cables. Mount with the holes at the top.

Downloads
25
Likes
3
Rating
0
P
PrintablesTony

Gridfinity Slanted 150MM Single Ruler Holder

I have another model that is a double ruler holder for gridfinity but I felt it works better slanted, so I created this one. It also only holds one ruler since I only have one. - 6U and 3U heights. - 1x4 Gridfinity I personally print at…

Downloads
25
Likes
4
Rating
0
P
PrintablesAlexGünni

Bauhaus tray - slanted pen attachement (6 pens)

Remix of the slanted pen attachment from Rvdk. Added two rows for six pens in total. Also slightly altered the other openings. Happy printing!

Downloads
23
Likes
8
Rating
0

Improved Slanted X Shot Fury X grip.

Self Explanatory. Now is compatible with this part and similar picatinny extenders.

Downloads
22
Likes
3
Rating
0
P
PrintablesMichiel P

Slanted sock clips

Keep your socks together! This version is thinner at the front and thick in the middle, just like the original SockStar improving the easy of use. I printed it in ASA for best heat resistance.

Downloads
21
Likes
2
Rating
5
P
Printablesm_collectable

Lattice Slanted Wave Open Frame Strong Pen Holder - Elegant home & office decor

Upgrade your workspace with this pen/pencil holder, featuring a distinct lattice slanted wave design. This stylish organizer is optimized for 3D printing and ideal for storing pens, markers, brushes, or highlighters. Designed for both…

Downloads
21
Likes
5
Rating
0
P
PrintablesAvel

Slanted Pickup Rings

Was upgrading pickups on my 2006 Schecter Blackjack and snapped one of the pickup rings. I made these based on the dimension given in the last picture. I followed the slant, meaning the neck pickup ring starts at 9mm and slants to 7.3mm…

Downloads
20
Likes
4
Rating
0
P
Printablesm_collectable

Ripple Ribbed Barrel Vase Cup (Vertical or Slanted Wave) — Chic Pen & Makeup Holder

Two barrel-shaped cups: a non-rotating version with vertical ripple wave ribs, and a second style with a gentle slanted twist. Both have a rounded silhouette and a beaded rim. Use them as pen pots, makeup/brush holders, or small vanity…

Downloads
20
Likes
6
Rating
0
P
PrintablesToyChestPlus

Slanted Rib Bowl Planter

Easy to print. Can be scaled. Nice and strong if printed traditionally. Will work in vase mode, but not recommended.

Downloads
19
Likes
6
Rating
0
P

Slanted Pencil Cup

This model is 3 of 5 in a collection to help make your pencil cups and desk more interesting.

Downloads
19
Likes
2
Rating
0
P
Printablesmgendron57

Flash Drive slanted holder

Here's a simple flash drive holder. I slanted it for better card viewing. Category: Electronics

Downloads
18
Likes
1
Rating
0
P
Printablesfrancesco

slanted nails holder

an holder for nails to be nailed slanted, oblique Fusion360 project available

Downloads
18
Likes
5
Rating
5
P
Printablesmscalora

Vase 92 - Slanted Sine Wave

Slanted Sine Wave using a twisted surface sweep projection

Downloads
17
Likes
1
Rating
5
P
Printables4židle

Slanted box

Slanted box

Downloads
16
Likes
2
Rating
0
P
PrintablesAKA.Andyroo

Slanted Pen Holder

Pen Holder inspired by my Slant Squared Modern Desk Light design on MakerWorld. https://makerworld.com/en/models/1702256-slant-squared-modern-desk-light#profileId-1805295 This design adds a nice modern touch to your work or home office…

Downloads
16
Likes
5
Rating
0
P
PrintablesBaeoniq

Soy cup & Chopstick holder - Tall, slanted version

This is one of a set of small, simple cup variants I made for soy sauce and resting Chopsticks on. This variant is tall and slightly slanted inwards, with a curved bottom (that requires support when printing). Print Settings Printer…

Downloads
16
Likes
0
Rating
0
P
Printables3dPrintaren

Head Phone Holder for slanted wall

Remixed to be able to mount it on a slanted (45 degree) wall. . Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0.28 mm Infill: 10% Filament: Random PLA White Notes: Print it with back down and…

Downloads
15
Likes
1
Rating
0
P
PrintablesJonas D

Slanted blade guards for kitchen knives (remix) - parametric & vase mode

Remix of https://www.printables.com/model/725157-blade-guards-for-kitchen-knives-vase-mode-and-para which offsets one side to allow for easier insertion

Downloads
15
Likes
1
Rating
0
P
Printablestigert

3030 aluminum profile slanted end cap

A angled end cap for aluminum profile that is held in with a M4 screw

Downloads
14
Likes
1
Rating
0
P
PrintablesSpaceFroggy

Gridfinity Slanted Bins for A6 pictures (1x4 - 1x5)

Bins I designed to hold my A6 photo prints! Also has a version with dividers I made for packaging of various sizes. The ones I printed are a bit shorter than the original model, as my filament ran out just before the end of the print and…

Downloads
14
Likes
3
Rating
0
P
Printablesldevillez

Two-Piece Cutlery Organizer with Slanted Drawer Insert

A two-part cutlery organizer designed to fit snugly into a kitchen drawer. Overall dimensions: 461 mm x 240 mm x 112 mm (front and back modules sit flush together with no gap) Insert width: 197 mm at the base, widening to 240 mm at the…

Downloads
13
Likes
3
Rating
0
P
PrintablesUserS

Slanted Planter

This is a planter with a slanted opening

Downloads
12
Likes
4
Rating
0
P
PrintablesBlinque

Slanted Clip-On Organizer

I was looking for somewhere to put checks from my grandma and realized there's a good 10mm of wasted storage space on the front of my monitor riser/desk organizer! This specifically fits this organizer:…

Downloads
12
Likes
1
Rating
0
P
PrintablesMineeForm

Slanted Self-Draining Soap Dish MineeForm FDM 3D Print STL File

https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models

Downloads
11
Likes
1
Rating
0
P
PrintablesBAP

Paper holder robust (Slanted print)

Print, snap off support, done.

Downloads
11
Likes
2
Rating
0

Car Slanted holder

Use this to display your cars or transformers at an angle! I will add a way so you can have them stay in the middle of the display stand. Tolerances are tight! .1mm difference all around. This is split into pieces to save filament and time.

Downloads
11
Likes
6
Rating
0
P
PrintablesAhmad Alyousuf

Parametric Slanted Filament Swatch Case

Overview This is a parametric OpenSCAD model for a slanted case designed to hold your filament swatches. The unique, angled slots allow for easy viewing and quick access to your filament samples, making it perfect for organizing and…

Downloads
11
Likes
0
Rating
0
P
PrintablesShifted Layerz

Slanted Soap Bar Holder

3rd soap holder I've made! This time, it's slanted with a focus on design. It also has a water shedder like my last model.

Downloads
11
Likes
1
Rating
0
P
PrintablesStarForge

Slanted Self-Draining Soap Dish StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Downloads
10
Likes
2
Rating
0
P

Glasses tray Slanted

Remix of Glasses Holder by Nan Design Studio with a sheared design. I have no modeling experience so the geometry is sloppy

Downloads
10
Likes
1
Rating
0