Search results: slug

Sort order

281 models

P
Printablesmatveymoo

Huge (Curled up) Friendly Articulated Slug

This is a curled up version of the fabulous Friendly Articulated Slug designed by Isaiah Steckling ( Printables , Thingiverse ). It is intended to print large and really huge slugs. For normal size slugs you can use the original model.…

Downloads
11,591
Likes
1,957
Rating
4.87
P
PrintablesRokyson

Snail and slug trap

Print settings I recommend printing this with PETG, ASA or ABS if it is going to be exposed to the sun. Works well with the layer height of 0.3 mm and 10% infill . No supports needed. Assembly For this snail trap, you only have to…

Downloads
1,762
Likes
238
Rating
4.81
P
PrintablesStrandedOrg

Captain Slug Caliburn 4 Stand

Stand for Captain Slug's Caliburn 4 pump action blaster. The Caliburn4Stand fits in Talon magazine loader. The barrel can be supported under the Doom with either the Caliburn4U or the Caliburn4Rail attached to the Doom picatinny.

Downloads
28
Likes
7
Rating
0
P
PrintablesCopper Keep

Friendly Articulated Slug

Update on June 21, 2022: Thanks to everyone who has been printing and sharing this design! When I first uploaded it, I had no idea that what I considered kind of a goofy design would be so popular! It is very cool to see how far it has…

Downloads
41,355
Likes
6,512
Rating
4.68
P
Printableskaje

Slug - fully articulated Print-in-Place

As noted in the Summary, this is a print of a design by Isaiah Steckling from here: https://www.thingiverse.com/thing:4727448 The design is very clever, but it is difficult to print correctly as the clearances are very small. Essentially…

Downloads
5,664
Likes
621
Rating
4.9
P
PrintablesTeque5

Friendly Articulated Slug (ezbrim)

This Friendly Articulated Slug is a remix of thing:4727448 by Isaiah that allows easy printing with default settings by adding a simple brim that connects all the parts on the bottom and just peels off once you finish printing. I created…

Downloads
3,040
Likes
271
Rating
4.81
P
PrintablesGhettoblasta

Futurama Brain Slug

I was in need of something unique for my daughter and I to wear to a UFO convention, so naturally I thought “brain slug!” I found GrayKube's model on Thingiverse and printed it out, but the pieces did not fit together. After a remix of my…

Downloads
2,822
Likes
1,288
Rating
4.9
P
PrintablesLautrec_996

Articulated-slug fridge magnet

Remix of the famous Articulated slug by https://www.thingiverse.com/8ran/designs Now with magnetic features. compatible with two 3x1mm magnets. Print without supports, 0,20 layer height, 30% infill.

Downloads
2,423
Likes
760
Rating
4.94
P
Printablespz

Flexible slug TPU

Simple flexible slug ideal for TPU printing.

Downloads
2,097
Likes
188
Rating
4.87
P
PrintablesAhmad

Dwayne "The Rug" Johnson AKA The Rock Articulated Slug

Credit to original creator: https://www.thingiverse.com/thing:5148846 Printed at scale 150%, and added custom support for the chin.

Downloads
1,850
Likes
161
Rating
5
P
Printablesthisguyprints

Articulated Slugcats

Articulated slugcats from Rain World with variations for the Monk, Survivor and Hunter. Partially inspired by Copper Keep's Friendly Articulated Slug design. Printing guide Don't use Arachne perimeter generator - it makes some walls too…

Downloads
1,207
Likes
131
Rating
5
P
PrintablesVladimir

Cute Articulated Slugs 4 Versions

This slugs represents the seasons. Its has ornaments on the heads. The winter slug has a gift on the head. The autumn slug has a pumpkin on the head. The spring slug has a flower on the head. And the summer slug has a pool on the head.

Downloads
1,056
Likes
251
Rating
4.2
P
Printables3d printer guy

Articulated Slug

It's a slug which is articulated and it needs no supports.

Downloads
979
Likes
96
Rating
4.89
P
Printables3DeeMagic

Articulated slug keychain

Spice up your keys with this slick articulated slug keychain! This is a remix of the popular articulated slug model which allows you to attach it to any item of your choice with its keychain compatibility so that your fidgety fingers can…

Downloads
927
Likes
150
Rating
3.5
P
PrintablesPocahontas

Cute Friendly Flexi Slug (Print in Place)

Cute Friendly flexi Articulated Slug (Print in Place), You can print in PLA, PETG, ABS. You can choose colored or single one Version. (Print in Place) Support free (almoust) Enjoy

Downloads
878
Likes
159
Rating
5

Rainworld Slugcat Keychain

Simply print the model and add a small string through the grapple worm with a knot to make your own keychain! Rainworld has really lacked merch despite being one of the best games ever made, hopefully this helps to rectify a little bit of…

Downloads
838
Likes
80
Rating
5
P
Printablescarlos

tank metal slug

bajé el modelo de una de la paginas de modelos gratis, lo tuve que dividir en varias partes por temor que salieran partes imperfectas, pero creo que la prusa lo hace hace muy bien. Es uno de mis primeros proyectos

Downloads
810
Likes
80
Rating
0
P
PrintablesUnde Cyce

Rain World Slugcat Pencil Holder

Here is the link to the original model: https://sketchfab.com/3d-models/slugcat-e814efabfea044adb0b555c9a0c48d14 Thanks for making this cute little guy! The original model was an avatar for VR Chat, it's a little bit too humanoid for me.…

Downloads
783
Likes
81
Rating
5
P
Printablesherbert

Snail Trap / Slug Feeder / Schneckenfalle

Having lots of snails in my garden eating my veggies. I need to feed them with special snail food ;) after every rain the food was lost and I needed to put new food out there. Searching the Internet, I found some great products to buy or…

Downloads
764
Likes
86
Rating
4.87
P
PrintablesLoafers Lodge

Slug Fence

When we start our new vegetables in the garden, it is always a fight against the slugs. When the slug slithers up the side of this fence, it is not smart enough to slide down the inside of the rim, around it and up the top surface. My…

Downloads
757
Likes
122
Rating
4.8
P
Printablesfirstgizmo

Snail Slug Trap

This trap protects your salads from unwanted guests like slugs and snails. It can be adjusted in order to spare snails and only let slugs trough. Its optional “EmergencyRamp” makes that insects or little frogs who fell in accidentally,…

Downloads
715
Likes
160
Rating
4.86
P
PrintablesNotorio3d
Downloads
703
Likes
94
Rating
5
P
Printablessurt91

Schneckenkragen (Slug Collar)

The Schneckenkragen will keep away slugs from your plants. But make sure that they are not hatching inside or find bridges, i.e., leaves of the plant touching the ground outside. Print in PETG (or ASA) for UV resistance. Also print a brim…

Downloads
654
Likes
65
Rating
5
P
PrintablesAryser

Slug Fence with double curved edge

Printing material: PLA: can be more ecological PETG: is more UV resistant Sizes: hight diameter (inner) diameter(outer) 6cm 12.2cm 20cm (fits for MK4) 6cm 18cm 6cm 7.2cm 15cm Slug fences of same model/size are pilable. Slug fences are…

Downloads
629
Likes
58
Rating
5
P
PrintablesWusaweki

Slug Buffet (slug-trap)

This slug trap consists of three parts: The ring shaped 'feeder' is placed on the garden ground and is filled with slug pellets (based on Iron III phosphate). The 'peg' is pierced through the middle hole of the feeder and holds everything…

Downloads
605
Likes
86
Rating
4.82
P
Printablesmabapro08

Satisfactory Power Slug (Very high poly & Manifold)

DISCLAIMER: The original models were made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…

Downloads
545
Likes
85
Rating
5
P
PrintablesK2ij3

TPU Slug and Diabolos for 9mm (AEA HP Max) and for 7,62mm (FX Dreamline, etc.) with steel ball

Slug or diabolos Print in TPU With steel ball as inlet see also suitable pelletboxes for 9mm or 7,62mm

Downloads
525
Likes
19
Rating
0
P
PrintablesScott

Articulated Slug 6x2mm magnet

Loved the idea of a magnet slug but the smallest magnets I had were 6x2mm. This remix fits a 6x2mm round magnet perfectly, just need a drop of glue to make sure it stays in place

Downloads
523
Likes
96
Rating
4.83
P
PrintablesSouky1122

Articulated Slug - keychain

flexible snail keychain, cute

Downloads
498
Likes
72
Rating
5
P
Printablesdeinfinityx

Articulated Blue Dragon Sea Slug

This blue dragon sea slug is very fragile but articulate. This model is fragile Tail clips on from underneath but again is very prone to breaking Print settings No supports needed infill is not relevant but more perimeters and higher…

Downloads
457
Likes
100
Rating
0
P
PrintablesHands on Katie

Slugmageddon Slug Trap

Simply add beer and add the lid, then watch as Slugmageddon effectively lures and traps slugs, keeping your plants safe and thriving.

Downloads
439
Likes
113
Rating
5
P
Printablesdickie24

snail and slug parametric fence system

Universal parametric system for creating snail collars and snail fences. (slugs too!) Using the type, you can make all the elements in the OpenScad file as desired. With the division into several segments, even with small printers a large…

Downloads
437
Likes
62
Rating
4.67
P
Printables3DMason

Articulated Slug - 3 Different Lengths

Articulated slugs from https://www.thingiverse.com/mcsim/designs 3 lengths available from short to super long. Print in place. No supports required. Individual sections are also available for remixes; i.e. head, body, tail. If you like…

Downloads
417
Likes
52
Rating
5
P
PrintablesBrando in Space

Rain World Slugcat Pencil Holder w/ AMS and Eye Change

Remix of Unde Cyce's Rain World Slugcat pencil holder . I printed this with minimal supports (which ended up being a bad idea) so keep the supports when printing it. It worked with only supports for hands and arms but was drooping and…

Downloads
413
Likes
55
Rating
5
P
PrintablesLele88

Snail Trap - Slug Trap - Trappola per Lumache

Snail trap I created these traps to protect the grains of poison from the rain, because if they get wet they melt and pollute the soil. I have drawn many variant in size and form. The most practical version in my opinion consists of:…

Downloads
401
Likes
51
Rating
5
P
PrintablesD.Ebi

Slug Beer Trap

The design is easy to print without supports and still estetic. The roof clicks together with the cup for easy empty and refilling. Feel free to scale the model if you have bigger slugs in your garden ;-) Printed in PETG or ASA for long…

Downloads
395
Likes
51
Rating
4.71

Brain Slug

easy to print without supports, featuring a rotating eye (snadno tisknutelný, otočné oko) Assebling (Sestavení): first insert pupil into eye (nejdříve vložit zorničku do oka) next step: put the eye on the axle (v dalším kroku nasadit oko…

Downloads
391
Likes
303
Rating
4.67
P
PrintablesTaffert Designs

The Nerf MooseSlug BCAR (bearing SCAR)

NEW!! - Added "Shorty" version for better muzzle clearance on Gecko 2.0 now 7mm shorter same shroud fits both versions.. _________ Features: Stronger pressure tongues won't snap easily Coarser threads won't strip Easy to turn grip Short…

Downloads
390
Likes
93
Rating
5
P
PrintablesVRsculpts

Slug-o-lantern pumpkin worm

Remix of articulating worm with a pumpkin head. Needs supports for the teeth but use support blocker everywhere else. Will print better at a slightly larger size like 5 inches.

Downloads
388
Likes
77
Rating
4.75
P
PrintablesPolymathic

Articulated Slugs Remix

This was remixed from JeffT's Articulated Slug remix I split the file for a two color printing UPDATE 4/14/2019: The models have been cleaned up so they are manifold, this avoids problems with certain slicers and the files have been…

Downloads
382
Likes
112
Rating
5
P
PrintablesBrettcnc

Muzzle Brake for 12 Guage Slug Gun, (Shotgun)

Design Concept for muzzle brake for a 12 Guage Slug Gun. I am modifying a Savage 212 bolt action shotgun to look like a large caliber precision rifle… For no good reason.

Downloads
368
Likes
34
Rating
0
P
PrintablesSchlossbauer

Slug

A Slug. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games

Downloads
352
Likes
63
Rating
4.5
P
PrintablesMaVeRa

Precise Slug for Umarex t4e HDR50

Precise Slug for Umarex t4e HDR50 This is my design on slug that I have tried on my TR50. Remove support after print is finish like on images! Then simply place the 8mm ball on top and with a little pressure it will click into position.…

Downloads
345
Likes
29
Rating
0
P
PrintablesStynus

Lettuce Snail Slug Protection Ring Barrier Fence

Ring to put around a lettuce plant to protect it against snails. Also the lettuce seems to grow faster when the ring is around it (Only tested on 2 plants, so can be coincidence). I designed it to the size of a average plant I had, but…

Downloads
320
Likes
45
Rating
4.8
P
PrintablesJosh Drury

Interchange Thumb Slug Holder – Holds 2 Interchangeable Bowling Slugs

Organize Your interchangeable Slugs – Bowl Smarter, Travel Lighter! This 3D printed Vice IT Thumb Slug Holder is built to hold two interchangeable slugs, keeping them protected and easily accessible whether you're heading to league night…

Downloads
314
Likes
17
Rating
3
P
PrintablesMiroslav Vaněk

Slug fence with strawberry support - Ochrana proti slimákům s oporou pro jahody

Tisk: 5 perimetrů 0 vrchních a 0 spodních vrstev (vzor plástve se vytvoří výplní) hustota výplně 10% vzor výplně - Plástev PET-G výška vrstvy 0,2 mm Print: 5 perimeters 0 top and 0 bottom layers (honeycomb pattern is created by filling)…

Downloads
314
Likes
193
Rating
5
P
PrintablesMike

Friendly Articulated Slug with hidden magnets

I used 2 magnetics (6x3mm). With a layer height of 0.2mm you should set up a pause at layer 19. The last to parts of the slug are not movable because of the magnets. The slug is 150% scaled because of the magnets. You should print with…

Downloads
294
Likes
61
Rating
0
P
PrintablesDoctaylor

The Slug - Pick/Card Holder for Mic Stand

Attaches to a Stand like a Mic stand or camera stand and etc. Can hold picks, cards or other slim objects. Must use TPU!

Downloads
280
Likes
25
Rating
5
P
PrintablesClay Rade

Giant Slugs

Big Slugs! Mind the salt, if you will. Scaled for tabletop use! (Decimated) versions of each model have had the Tri count reduced to be smaller downloads, the non-decimated versions are the original sculpts. If you like this model a whole…

Downloads
280
Likes
54
Rating
5
P
Printablesraptor1jec

Mushroom Slug Trap

This is a remix of the Mushroom slug trap / Piège à limaces Champignon by xfifi at https://www.thingiverse.com/thing:2205074 . The three top supports went straight down into the bottom, letting the slugs climb out. I removed the three…

Downloads
275
Likes
44
Rating
4.75
P
Printablesxfifi

Mushroom slug trap / Piège à limaces Champignon

This is a remix of the slug trap from AlexEnglish ( http://www.thingiverse.com/thing:23467 ) Improvements: new mushroom-shaped design and 3 eyelets in order to anchor the trap on the ground in case of strong wind. This is a slug trap for…

Downloads
268
Likes
58
Rating
5
P
PrintablesC0PATHUK

FA Slug Kid (separated)

The slugs that were presented to the daughter of a friend laid eggs. I thought it was a good idea and babies should hatch from the eggs. That's how this remix came about. Kid made from the tail. Therefore, less mobile than the…

Downloads
227
Likes
20
Rating
4
P
Printables3DPrintDad

Googly Slug

Just a minor tweak on the very cool Artculated Slug by 8ran. I used Tinkercad to scale it up a little bit and add sockets for standard googly eyes. The ones I used are 6.5mm in diameter and it was a tight fit. Everything is extra fun with…

Downloads
225
Likes
38
Rating
5
P
PrintablesPaul

Daystate Air Ranger .22 Auto Rotation Mag 40gr,30gr,25gr Zan slug

.22 mag for Daystate Air Ranger. will except 40gr 30gr 25gr 22 Zan slugs. Parts Required 1x .5x12x25 spring 1x m4x8 countersunk hex screw 1x m2.5x8 countersunk hex screw 2x 4x2mm magnets Print Settings Printer Brand: Creality Printer:…

Downloads
221
Likes
19
Rating
5
P
PrintablesWheels7097

Banana slug

Banana slugs are primarily found in the Pacific coast of North America, from southeast Alaska to central California.

Downloads
216
Likes
10
Rating
5
P
Printablesdprintman

Brain Slug from Futurama

Printing Embedded Magnet Models: You will need to have your slicer pause the print at the correct layer so that you will be able to place the magnet. The cavity for the magnet should be plenty large enough for common circular magnets. See…

Downloads
204
Likes
100
Rating
5
P
Printablespurkut

Metal Slug Rebel Army Tank

You can support us by purchasing our paid model to get more free products.

Downloads
204
Likes
25
Rating
0
P
PrintablesBella Vazquez

slug keychain

slug keychain

Downloads
191
Likes
22
Rating
1
P
PrintablesK2ij3

Diabolo - Slug - Pelletbox for 9mm Amunition

Print in PLA Stackable Sliding lid 9mm for e.g. AEA HP Max

Downloads
189
Likes
11
Rating
0
P
PrintablesJef

Mushroom Slug Trap

The Mushroom Slug Trap is a clever and eco-friendly solution for gardeners who want to protect their plants from slugs and snails. Designed in the form of an enchanting mushroom, this trap not only serves its purpose but also adds a…

Downloads
189
Likes
12
Rating
0
P
PrintablesMike

Shaker or match pellet box 4,5 5,5 mm .177 .22 slugs various heights and grids

I thought the available shaker boxes were a bit steep pricewise and also very crammed for my big fingers. It started with the idea of a somewhat wider grid for convinience and escalated from there into a modular box system when I figured…

Downloads
188
Likes
17
Rating
0
P
PrintablesRob W1RCP

Simple Nano VNA carry case (Briefcase) with Calibration slug holders

# Per Assy Short Description 2 M3x12 screw 2 M3 washers 2 M3 nut 1 3D Printed Kit Screw locking glue or liquid Foam for protection is optional Assembly Instructions: To assemble, place the lid on the bottom, and insert a screw from the…

Downloads
179
Likes
25
Rating
5

.50 cal turbine slug/bullet for Umarex HDR50

Put the hairpin in to a hole. Inventor sources included.

Downloads
177
Likes
21
Rating
0
P
PrintablesSheretech

Articulated Cat slug

Remix of the friendly slug, just with a cats head instead.

Downloads
177
Likes
31
Rating
5
P
Printablesdreadnaught

Spice Rack Track Slug

Remove slack from 15mm book posts.

Downloads
177
Likes
26
Rating
5
P
PrintablesEd Johnson

The Slugscape Hotel Slug and Snail Trap

The Slugscape Hotel is a fun print to add to your garden if you have problems controlling slugs and snails. Just dig a shallow hole to hold the base, add some beer, add the cover, and the slugs will fill up your hotel's jacuzzi in no…

Downloads
168
Likes
59
Rating
4.75
P

Articulated Slug remix

Some embellishments for 8ran's wonderful articulated slug. Used a heat gun to bend up the antennas as someone suggested. Could use some 4mm googly eyes instead of the ones I made, but I couldn't find any where I live. Top hat just presses…

Downloads
165
Likes
44
Rating
5
P
PrintablesLele88

Mushroom Snail Trap - Slug Trap - Fungo Trappola per Lumache

Mushroom-shaped variant of my slug trap, in various sizes and in a lightened version to save filament. The various versions of the Top are grouped in the zip file. The base and the various pins can be found in the original model, here I…

Downloads
164
Likes
30
Rating
5
P
Printablesnoodleguy7

Slugcat Keychain

I made this myself but I can't print it because my printer is not working

Downloads
152
Likes
14
Rating
0
P
Printableskrspirit 205

dummy 13 ultra slugger

for the ultraman fans can now use ultraseven's ultra slugger

Downloads
147
Likes
40
Rating
0
P
PrintablesClay Rade

Slugcat

Slugcat, from the game Rainworld. Inspired by Necrojinsei's Slugcat Figure and used the Sketchfab model by Gundycat to pose it and do a little extra sculpting in Blender. Wanted a contemplative pose, made for a friend! More D&D minis…

Downloads
145
Likes
17
Rating
5

Pokemon inspired, Slugma, Tabletop DnD miniature

IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Slugma, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.

Downloads
131
Likes
22
Rating
0
P
Printablesswiggy

Rocketslug fishing lure saver

Print 2, and they should snap into each other. If you snag a lure on a tree or similar out of water object, snap the 2 around your line and throw it at the object. This will travel down like a Zipline, and when it hits, the impact should…

Downloads
131
Likes
21
Rating
0
P
PrintablesRDA

Metal Slug Heavy Machine Gun

Heavy Machine Gun Keychain

Downloads
130
Likes
6
Rating
0
P
Printablesrtj

FX Impact Long Slug Magazine Cover 22CAL 28 RND

I am trying to find some good slugs. Longer slugs heavier slugs don't fit the standard Sideshot magazine so I made this. There are probably others here somewhere but I didn't check. It works on my magazine, but it's a close-fitting part,…

Downloads
125
Likes
13
Rating
0
P
PrintablesOptron

Slugcats Rain World

Дочери очень нравится эта игра, но моделек по ней почти нет, поэтому нарисовал свое видение этих котов.

Downloads
125
Likes
13
Rating
0
P
PrintablesMeki

Diet Slug Fest (slimmed down slug trap)

This is a slimmed down version of Wusaweki's original trap, prints faster and in better quality. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 100 Filament:…

Downloads
123
Likes
18
Rating
3
P
PrintablesTaskForge

Airgun Slug - various Options

The airgun slugs are scaled to 1 inch and can be scaled down to the desired size as needed. For use in PCP airguns only, never use lightweight pellets in in spring powered airguns.

Downloads
122
Likes
9
Rating
0

.50 cal diabolo slug/bullet for Umarex HDR50

Put the 4.5 mm ball in to a hole. Inventor sources included.

Downloads
120
Likes
10
Rating
0
P
PrintablesSkwiggums

Skwapler (Captain Slug Stapler Remix

The Skwapler is a remix of the grip and body panels from Captain Slug's stapler gryphon, adding holdster support and a grip which can contain a 950 mAh 3S battery. The Skwapler uses a manual pusher and dual stage trigger with a cherry…

Downloads
118
Likes
35
Rating
0
P
PrintablesAsger Elnegaard

Slug trap

This is a small container, which you fill with slug poison like ferramol or similar. The size of the holes only allow slugs without a shell to enter, such that "shell" slugs are not as likely to eat the slug poison. The container and cap…

Downloads
111
Likes
10
Rating
5
P
PrintablesEgor Rylov

Bait mold Slimmy Slug 80 mm tail

Эта точная копия модели Slimmy Slug разработана для эффективной ловли хищных рыб, с доработанным хвостом таких как щука и судак. Ее удлиненное, изящное тело, лишенное активных элементов, имитирует движение естественной добычи в воде.

Downloads
111
Likes
20
Rating
0
P
PrintablesTomoaki Shimazu

Slug Trap

Slug trap using beer or attractant insecticide. This design allows for printing in spiralize mode (vase mode) to reduce weight. Place a small amount of beer or attrantant insecticide in the container and lightly place the rainproof cover…

Downloads
108
Likes
16
Rating
5
P
PrintablesAbeFM

Vase Mode "beer" Slug Trap

I tried the tuna-can slug beer trap, and liked it! But watching at night, I noticed most slugs went in, grabbed a six-pack and left. I had the best luck with a can that had an overhang and thought I could print something. I found a couple…

Downloads
106
Likes
13
Rating
5
P
PrintablesJezzaWalker

R. R. Slugger - LEGO Compatible Slug Mascot

A cute LEGO-compatible slug in honor of the R. R. Slugger YouTube channel. Sort of inspired by some of the older LEGO animals. Modeling this involved mixing LEGO compatibility with my usual half-baked sculpture techniques in Blender. It…

Downloads
106
Likes
20
Rating
5
P
PrintablesSlick

2015 Chevy Bowtie Seatbelt Slug

Used to stop the alarm as well as bring a classy look to your rig. Print all the same color or customize the colors.Prints without supports but may need a bit of trimming once printed. Please rate and review.

Downloads
102
Likes
5
Rating
0
P
PrintablesProfHankD

Graduate Brain Slug

If you're graduating, doesn't your brain slug deserve at least some of the credit? Here's a heavily tweaked version of Brain Slug V2 that has the following improvements: Separate-print graduation cap (mortar board), complete with antennae…

Downloads
102
Likes
30
Rating
5
P
PrintablesMaxGallows

Super Cute Squishy the Slug

Meet Squishy the Slug! This adorable little slug is all charm with its oversized googly eyes and squishy, rounded body. Made to melt hearts, this figure features a gentle smile and a cozy, sluggy wiggle that makes it perfect for desks,…

Downloads
100
Likes
11
Rating
0
P
PrintablesK2ij3

Diabolo - Slug - Pelletbox for 7,62mm Amunition

Print in PLA Stackable Sliding lid 7,62mm e.g. for FX Dreamline …

Downloads
100
Likes
8
Rating
0
P
PrintablesTinkerWorm

Fat Articulated Slug

Created as a test to see if I can create my own designed articulated toy. ======================================================= Not for commercial use or resale on ebay/etsy/etc please. Create your own, it's really not that hard.…

Downloads
94
Likes
15
Rating
0
P
Printablespz

Small articulated slug

My version of the articulated slug optimized for the fastest printing possible.

Downloads
90
Likes
3
Rating
0
P
PrintablesAFFPV

Slug Pug

Ai inspired sculpture. Have fun printing it

Downloads
88
Likes
13
Rating
0
P
Printables紗里 落合

Articulated Slug - 6x3mm Magnets

A remix of the Articulated Slug fridge magnet by Lautrec_996, itself in turn a remix of the original articulated slug by 8ran on Thingiverse. This version utilizes two 6x3mm magnets. There are two slots, one in the head and one in the…

Downloads
88
Likes
8
Rating
0
P
PrintablesBig B

Slug and snail beer trap

Base part is ~70mm deep, ~55mm wide. Screw on cap, nothing fancy. Not to big. Holes are 18mm. Easy print. After one day I received pictures and someone was having a party already ;d Printed with PETG Regular settings just print with more…

Downloads
87
Likes
4
Rating
0
P
PrintablesEgor Rylov

Bait mold Slimmy Slug 80 mm

A replica of the Slimmy Slug model, it's designed for effective fishing of predatory fish like pike and zander. Its elongated, graceful body, devoid of active elements, imitates natural prey moving through the water.

Downloads
85
Likes
12
Rating
0
P
PrintablesSillybutts

Printable Nylon Spacer Replacement for 2021 CaptainSlug Designs

A printable replacement for Nylon spacers used in some recent CaptainSlug designs. Printed flat instead of vertically in order to not snap along the layer lines as easily. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…

Downloads
84
Likes
13
Rating
0
P
PrintablesGemeneye

No Hardware Captain Slug Picatinny AFG

Hello everyone! This is a remixed version of Captain Slug's Picatinny Angled Foregrip that doesn't require any additional hardware to use. I like the no hardware system I developed for my Torrent Inspired Angled Foregrip , so I figured it…

Downloads
80
Likes
30
Rating
4.5
P
PrintablesThe Next Layer

Slug and Snail Trap

I tried a bunch of the other ones out there, but they had issues with the threading, or the bin didn't fit, or they weren't at all what they were advertised to be. In any case, this one works, so long as you have solid overhangs, like on…

Downloads
79
Likes
6
Rating
0
P
PrintablesKrummrey

Slug and snail pellet holder

Slugs have been eating all my veggies in my yard. So I decided to enter the fight and bought some slug pellets and designed this little rain cover. Slugs and snail can still reach them. Inspired by the Lima trap

Downloads
78
Likes
17
Rating
0
P
PrintablesSören

Slugmageddon support free

This design is printable with no supports. I tried to stick to the original dimensions as much as possible. Please print as oriented in the file

Downloads
78
Likes
13
Rating
5