4,255 models
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
Whether you've got flexible filament or not, these cases make for an easy print and a sweet looking phone. I designed these cases to print without support, so they turn out very clean. Both versions also provide a buffer for the screen…
Print approx. €1.67–€2.05 excl. taxPreliminary estimate for one variant
Silenziatore modulare che può fare sia da silenziatore vero e proprio, sia da prolunga canna... Esternamente è 35mm di ø, ed è lungo 80mm. Il vano interno è 30mm di ø ed è lungo 70mm. Adatto per essere inserito in repliche con handguard…
Print approx. €2.96–€3.61 excl. taxPreliminary estimate for PETGSource material: PET
Silenziatore modulare studiato per essere un silenziatore effettivo con 7 dissipatori di suono. Rende il suono emesso di fronte alla replica pesantemente otturato, trasformando gli acuti e i suoni alti in bassi. soprattutto è grosso e…
Print approx. €6.60–€8.07 excl. taxPreliminary estimate for PETGSource material: PET
These are vise soft jaws designed 5 inch vise There are 4 recesses in the back for 8x3mm magnets. You could use it without magnets or just the 2 on the front face but 4 holds it really nicely to the vise. I used C.A. glue to hold them in…
Print approx. €6.32–€7.73 excl. taxPreliminary estimate for one variant
Splitted design for easy modyfication in Slicer I set the blue one to print at 5 mm/s speed, to make the overhangs looks good But I also include not splitted version --- Commercial Use --- By purchasing this design on Cults , you support…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Airsoft Muzzle device for Glock Models with a Threaded Barrel. Attaches via M14x1 LH threads. This Print consists of two parts. A threaded insert which goes onto the threaded portion of the outer barrel and the comp itself which simply…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
I've created a compensator for airsoft pistols inspired by some real designs. On an airsoft pistol, it serves purely as a decoration. Pictured on my WE G19. It's modeled with the standard 14mm twist and works best with a short adaptor…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
Melting Soft Serve Cone.
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant
I designed this funnel to help me reload my airsoft m4 mags. I recommend printing this in vasemode because it eliminates the ugly seams and is fast. Print this with any layer height you want, it doesn't really matter but i recommend…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Softair bottles arrives usually in carton boxes, once a few have gone the remaining ones wander around and they are under pressure! this canister keeps them in place, full capacity is 13 but, because I carry also maintenance oil bottles,…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when attached…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Any feedback is welcome This custom-designed 4-gear fidget spinner combines mechanical ingenuity and playful functionality. Featuring a snap-in-place assembly, this spinner is easy to assemble without the need for additional fasteners.…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant
DE: Einfaches Ersatzteil für ältere Blanco Select Müllsysteme mit Soft-Close Funktion. Die Stützstrukturen an den Ecken sind in diesem Fall sinnvoll um ein besser Passform zu ermöglichen. Als Material empfehle ich PETG um vorzeitigem…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Soft Pretzel
Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant
3 slots CO2 bottles container for safe storage in backpack or side bag. Caution: before the 1st usage use abundant WD40 on treads to ease the coupling. Following the first go no more treatment is required.
Print approx. €5.07–€6.19 excl. taxPreliminary estimate for PETGSource material: PET
This light diffuser fits on a Godox v860II flashlight. It's very easy to use and prints in vase mode. If you don't have the same flashlight, you can use the provided Fusion 360 file and replace the profile of your gear. It doesn't need to…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
A joke that I've spent too much time on: One of my airsoft teammates loves watching the hottest trends in the real “tacticool” shooting and considering the choice of a muzzle device, often kept repeating, that the best type ever is the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Airsoft Sniper VSR piston and spring pin. I have 2 variants of piston (both work even on stronger springs) And the pin, it is better to put a bearing or a…
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when printed…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Sofa with secret compartment to store banknotes, gift card, credit card, keys or other. I made it for a gift to a friend of mine who needed a sofa. Not being able to afford a full-size sofa, I made this one in 1:12 scale with a secret…
Print approx. €10.11–€12.36 excl. taxPreliminary estimate for one variant
Remixed funnel to fit in AR15 magazines. Tested with ICS, G&G and Amoeba magazines.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
This is a picatinny rail for airsoft pistols. It fits an Umarex Colt M45 CQBP pistol. This could fit other handguns. It should fit other Colt handguns, but I am not sure.
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant
PolyDryer Annealing Mod – Soften, Dry & Anneal Your Prints This mod platform is designed to be placed inside the Polymaker PolyDryer , transforming it into a more versatile tool for makers. By elevating objects inside the chamber, it…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Best printed in PETG. Model shown printed in 0.30mm layer height, 0.65 extrusion width, nozzle 0.4mm, infill 5-10% cover must be printed with supports.
Print approx. €5.29–€6.46 excl. taxPreliminary estimate for PETGSource material: PET
Original helped my feeding issues but caused fps to drop on full auto. Removing the pickup side fixed that for me. May require a bit of trimming to fit.
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
!This is not a real weapon! Hello, I have a mount for Airsoft AK 47/74 for mounting on a riflescope or collimator. It is suitable if your AK Kalashnikov does not have one from the factory. It is an exact replica. Suitable for cosplay.…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
I have an old no-name M4-style softgun which uses non-standard rear-feeding STANAG-style magazines, which are very hard to obtain today. As some of the interal parts of my original magazine has cracked over time, I decided to…
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for PETGSource material: PET
foldable holder, the joint holes measure is 2.3mm, so raw filament can be used for the final assembly. some WD40 and small screwdriver to clean the passages are needed in order to ease the final assembly 2 printing files due to dimensions…
Print approx. €4.61–€5.63 excl. taxPreliminary estimate for PETGSource material: PET
The Microsoft LifeCam Cinema Camera Mount is a great option for those looking to monitor their 3D prints. This camera mount is designed to work with the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks , providing a…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
An improved version of the HK pistol grip lock, with a thicker mid-bar, better fit, and a removal/installation tool.
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
I recommend sticking anti-slip tape. Doporučuji nalepit protiskluzovou pásku.
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
An amplifier for your KWA M11A1.An amplifier for your KWA M11A1. Place supports like this:
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Airsoft Sniper VSR Remington 700 sheet for legs. It is a replacement sheet, if you need it, the original one is lost or destroyed. It fits perfectly! It…
!!!This is not a real weapon!!! Hello, Welcome to my profile, full of models and miniatures :-) I have for you Airsoft Steyr AUG rails R.I.S. system . This is a system of rails that can beautify your Airsoft replica. The rail system is…
This cool Sofa Table is super practical because you don't need glue and no screws just a 3d printer Print the Base and the Table legs with 95A TPU and the rest with PLA PETG or other material. If you want to adjust the height of the Sofa…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
Wider base for extra stability.
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
Studenti si vymodeluji a vytisknou rám dronu dle potřebných parametrů a velikosti, osadí a zapojí elektroniku a naučí se konfigurovat řídící jednotku.
Print approx. €5.90–€7.22 excl. taxPreliminary estimate for PETGSource material: PET
Needed Hardware: 4mm Bungee Cord 4x 3mm M3 Bolts (stainless) 4x 3mm Heat-Set Inserts Print Instructions Print Bottom Half in PETG (or similar) with >5 walls. No supports Print Tpp in TPU 98A (or PETG alternatively) with 8 walls
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant
DISCLAIMER: THIS IS FOR AN AIRSOFT GUN AND NOT ANY REAL WEAPON Requires a typical spring from a ballpoint pen. Printing recommendations: PLA/PETG (I used PLA+) 0.2mm layer height 80% infill 3 walls Tree supports ONLY for the catch flap…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Ramka do powieszenia w dowolnym miejscu domu. Służy do strzelania na sucho do tarczy z airsoft gun. Po zamontowaniu od tyłu ramki dowolnej sklejki czy tablicy korkowej i przyklejeniu do niej cienkiej gąbki i następnie materiału jest…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
https://www.smithsonianmag.com/smart-news/mathematicians-discover-a-new-class-of-shape-the-soft-cell-180985124/ Model has some fillets applied, otherwise the edges are too sharp to print.
Print approx. €4.47–€5.46 excl. taxPreliminary estimate for PETGSource material: PET
!!!Not a real weapon!!! Hello, Today I have an Airsoft AK47 front sling eye for you. If you accidentally lost it or broke it. It fits perfectly! :-) The printing is quite demanding! Good luck with the printing! I used ABS/ASA as the…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Ewald Schillig Sofa Fernbedienungsgehäuse zur Sitzweitenregulierung Print instructions Zusätzlich benötigte Teile 4x M3 Senkkopfschrauben Optional : 2x Neodym Magnete
An unserem Sofa ist ein Fuß zerbrochen. Ich habe das Modell passend skaliert (30 mm hoch / 55mm Durchmesser). Außerdem war der alte Fuß nicht geschraubt, sondern nur gesteckt. Daher habe ich einen Stift ergänzt (13mm Durchmesser). Das…
I own two of Microsoft Wireless Mobile Mouse 4000, and the rubber coating on the scroll wheel has gradually worn and come off on both mice. I have designed a replacement part. I have printed it with TPU, and it fits well without need for…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Tired of your ottoman slowly drifting away every time you sit down or stand up? This custom 3D printed bracket is designed specifically for the Wayfair Tolzmann Sectional Sofa to keep everything perfectly aligned and frustration-free. The…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for PETGSource material: PET
A lens adapter designed for the Microsoft Lifecam studio and a generic wide-angle lens and connect to the parts listed here: https://www.printables.com/model/258750-camera-side-mount-prusa-i3-mk3s The lens I used is here…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
Armrest cup holder for Stanley cup. Originally made for Ikea Friheten sofa, but it fit for every sofa with armrest thickness around 110mm. Holder is made up of 2 pieces. Its connected via thread what is allowing easy replacement and using…
Print approx. €10.63–€12.99 excl. taxPreliminary estimate for PETGSource material: PET
Sof Keychain
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Fatigué de m'ouvrir le crâne sur la poignée de la descente du carré en remontant panneau fermé, j'ai remplacé la poignée en bois par ce modèle qui conserve la forme d'origine. La poignée est maintenue en place par un noyau vissé en…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
See www.BirdWatchAI.com for all of the details on how to setup the software. Free download. You can print/build it all yourself, or purchase a setup kit. See the live community feed of feeders currently running the BirdwatchAI software at…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
👇 See sizing instructions below 👇 Original Tingivese Description This is a remix on ohmg's tape measure holder . Thank you for providing the STEP file! My wife's tape measure had a rivet holding on the metal end, so I had to make a notch…
The source marked this model as adult content.
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
These cabinet knobs are pleasant to the touch thanks to spiral narrow ribs all around. There are five basic shapes (3 bigger and 2 smaller) in the back-mount version (A1, B1, C1, D1, E1) and same in the front-mount (A2, B2, C2, D2, E2)…
Summary Soft Tape Measure Spool for a 5/8" wide, 5ft long soft tape measure. Super glue end of pin into core. Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.4 Infill: 20% Filament brand: Any…
Inspired by The DOM organizer. I modified the dugout organizer design made by John Tedesco ( https://www.tinkercad.com/users/hRCDevMzLeH-john-tedesco ) https://www.tinkercad.com/things/4cf5V6weAc0-dugout-organizer The design of the bottle…
Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…
Do you like Managed Democracy? Well now you can spread it all over your local airsoft field! When I posted the original Backhammer kit for the PLR-16, people brought up its similarity to the Liberator from Helldivers, and suggested that I…
Description : This slim & sturdy wallet has room for (6) cards and a bonus slot in the middle for paper cash. Why no coins? …Because: My Money Don't Jiggle Jiggle, it Folds . (sorry could not resist… lol). The model is quite versatile &…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
Dart Holder Dart Rackstand for soft and steel Darts.
I present to you the cover that I modeled directly around the official 3D model of Flipper Zero. The thickness of the bumper is 2mm It was made with a very soft TPU due to the wrapping surface of the case and the difficulty of inserting…
Grenade Launcher Airsoft Used screw: 3x25 for body 3X 3x15 for pistol grip 2X 3x10 for RIS rails 4X Used spring: D/d = 8/0.8 mm L=10mm or similar 3D printing settings Plate1: 0,2 mm layer 8 walls 30% infill no supports Plate 2: same as…
This is a stackable Airsoft Suppressor Baffle that I made for Surefire LLC replica suppressor. Print as many as you need and just stack them. Each one is 16.6mm high, and they have 1.6mm overlap, so a stack will be N*15mm+1.6mm high,…
6 different sized airsoft grip. Use 5x30 mm hexbolt. Printed with 0,6 mm nozzle. 3-4 walls. 0,24 layer height. 20% infill. Printed in PLA + 870 3DLAC. Very strong. You can also use fussy skin to give it some grip. I used 0.3mm fuzzy skin…
Why Just a simple picatinny mount that you can use to mount anything you like. Use it as a starting point for your own designs....or just print it and glue something to it. Maybe you've always wanted to mount your wisdom tooth to your…
Make working Lexington automatic pistol from Cyberpunk 2077 out of Action Army AAP01! This print replaces original upper receiver and outer barrel and reuses most of the screws. Might require little bit of sanding but in my case was not…
The source marked this model as adult content.
Functional 3d printable airsoft ak body kit with folding stock. Uses standard airsoft ak internals. Includes stl and step files. Takes about 1kg of material to print. I desingned the model with 0.25 mm tolerances between each part.…
The Manticore is (to my knowledge) the first shell-ejecting blowback 40mm launcher in the world. It uses HPA to cycle short 40mm grenades (shells shorter than 90mm), and fires in semi-auto. I recommend printing all of the parts for this…
The Libra Classic break action shotgun, in 40mm form! Compatible with all standard 40mm airsoft grenade shells. All build instructions and files are below, including .f3d and .obj files for that sweet, sweet remix culture. In addition to…
Use 100% infill, mine was printed with Prusament PLA and it can tank shots from a Tokyo Marui GBB pistol with no problems (300ish FPS). You can make it thicker (source file included) or stick something on the front to absorb the impact if…
Dies ist ein Waffen Ständer für mein Airsoft Gewehr. Damit lässt sich die Waffe wunderbar horizontal präsentieren. Das Magazin ist völlig neu designed, inspiriert habe ich mich von den Magpull und ETS Magazinen. Zum verbinden des Magazins…
100% Accurate Frame Model (for airsoft)
Added a raised flat handle to make turning easier. July 2024 :- Updated handle files to match the different base sizes from codysechelski project
Bring one of the world’s most recognizable landmarks to your 3D printer with this Hagia Sophia Mosque (Ayasofya) model. Inspired by the historic beauty of Hagia Sophia in Istanbul, this 3D printable design is made for architecture lovers,…
Brief History of the Karambit: The karambit was originally an agricultural implement designed to rake roots, gather threshing and plant rice in most of island Southeast Asia. It's a smaller variant of the Southeast Asian sickles. It still…
Is it practical, useful, and expands on the body of human knowledge? Probably not, but it sure is satisfying.. Introducing the Soft Box! My Cloth 3d Printable fabric has a secret super-power, it can be built into 3D objects! Why 3D print…
Customizable keychain. You can add your players name and number. Made this for my girls and they loved it. This can be made with either baseball or softball colors. Just do a color change when the stitches start printing and it will look…
If you read this, please leave a ❤! An adapter I made to I can more easily reload my airsoft pistol mags. Printed in PETG. The short version sticks out less but requires a little extra finesse with gloves on. Edit 11/29/2023 V2:…
The Principle Suppressors reduce the sound of the explosion by trapping and slowing down excess gases. With airsoft silencers, the most important thing is to reduce the high frequencies, because they are the main culprit for revealing the…
This 3D-printed planter is designed to resemble a soft drawstring pouch, blending a minimalist aesthetic with a touch of originality. Its smooth surface and natural folds create a realistic fabric effect, making it an eye-catching piece…
All the bearings use the standard 6mm Airsoft BBs. Ranging from 20mm, up to 200 mm (outer diameter), in 2 and 5 millimeter steps, and are 7.1mm thick . I don't even know what you could do with a 200mm bearing, but if you do, send us a…
Airsoft speedloader m4/ar15 You need: 1 m3x20mm 6 m3x10mm 6 m3x10-20mm 1 m6x20 1 m6mm nut 1 half pen spring Printed with: 0.4mm nozzle, 3 Walls, 15% infill and 0.16 layer height. Message me if the tolerances is too tight for your printer.
The objective of this project was not to out perform the commercially available spring grenades, let alone the gas ones. It was mainly to test the concept and make a working airsoft spring grenade that doesn't use trap doors. That said,…
This silencer is based on the Osprey 45k and was designed to be used on my 1911 R32 and holstered on my Swiss Arms Adapt-X, so the dimensions are definetly not accurate in relation to the RS one. Dimensions: 23 x 35.5 x 150mm The baffle…
Printing Instructions Print without supports and at 100% infill. If using PrusaSlicer, I recommend disabling “Thick bridges” and enabling “Detect bridging perimeters”. If you have assembly issues with the holes being too small, you can…
Large bag clip 🗜 designed to keep your food packages 🍪, coffee bags ☕, or other pouches tightly sealed. Unlike most clips you’ll find online, this one is bigger and sturdier 💪 — perfect for larger packages. It comes in three different…
Summary It is a model of a Mazda Miata / MX-5 (NB) in a kit card style. This is a complete redesign, based on the idea of my old model . This one has been redesigned from scratch with more experience and knowledge. Some characteristic…
Reuploaded with most recent fixes and edits. Thingiverse and discord have all the old files if you want them. *PAAR stands for Printable Airsoft Assault Rifle duh This is a set of files to get a body of an M4 looking thing designed to be…
The front is fixed with one M3x15 screw and nut. (the front also have another two screws just for alignment), the fixation in the picatinny rail is made with a M3x30 screw and nut. Print with suport (touching buildplate).
Sako style handguard airsoft ar-15. The one that is about/is introduced to service in Finnish(13" long) and Swedish(9.5" long) armies. Use as is or with upper, (green and brown in pictures)…
*** 16/08/2023 added another version of the Blade.*** Hi there, I designed this knife to be used in airsoft. Therefore, for your own safety and especially the safety of others, print the blade only out of flexible materials like TPU. Not…
Soza stl Forniturebot No.01 - Soza (The Assistant) Soza, the first alona's friend that she made from her favorite sofa. Soza has ability to transform him self from sofa to robot. As the first generation of his kind he is not a perfect…
Hydra mount Remodeled to be stronged when 3dprinted and easier to print, made for airsoft Uses m5 nuts and bolts(at least 30mm)
Angled airsoft grip. Use 2 5x30 mm hexbolt. Printed with 0,6 mm nozzle. 3-4 walls. 0,24 layer height. 20% infill. Printed in PLA + 870 3DLAC. No need for support.
