650 models
This extremely high resolution topographic globe of the earth prints in two halves, using around 350g PLA filament. It was created using blender, and adds small step at the coastline to aid with recognition of coastlines. The complete…
Print approx. €16.27–€19.89 excl. taxPreliminary estimate for one variant
This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
This is a solution to store all your Arkham Horror Game Assets. It stores all cards and tokens of the game. It works well with the original Gamegenic card sleeves. The cardbox may be too tight for the older original Fantasy Flight Games…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Sometimes there is a problem with the printout being detached from the table? A cheap, printed scraper will be perfect
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET
Allow your treasured handbag to take a break in style with our beautifully crafted Portable Purse Holder Hanger Hook. Perfectly designed for use on any table or surface, it keeps your purse handy and clean while enhancing the aesthetic of…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
This is a storage solution for the classic wargame Command and Colors Napoleonics from GMT games . As the game has three different piece sizes, I have divided them in three trays: Infantry : 180 pieces Cavalry : 77 pieces Artillery and…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution Keep your external hard drives and SSDs organized and protected with this custom-designed storage organizer. Built to securely hold a variety of drive…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
Cats often enjoy eating grass as a natural digestive aid, but older or toothless cats commonly face difficulties. Without teeth, cats can't properly bite off grass blades and instead resort to pulling, often uprooting entire grass clumps…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for PETGSource material: PET
I noticed that there was a squeak coming from the back seats of my Model 3. The problem got worse after I drove passengers in the back seats. I decided to track the problem and found out that it was caused by Isofix and vinyl seats being…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
The Internal Fan of the Argon One M2 breaks. (my 2 cases - both broke within 4 month - running at only 33%) Product designs using these small fans can't be trusted for stability over longer period of time. Specs for internal fan is a…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Reexported model with high density of mesh because i would like to have quality and added hole for long nozzles.
Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant
Some Notes: Printed 1,5 years ago, used support material, likely unnecessary. Printing is super easy, 15% infill. Warmed metal at folds with a hairdryer for 3D model fit (see last picture). When nailing to the wall, use a level for…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Weight plates for blinds sometimes become brittle and break when removed from the connecting chain. Several popular repair solutions ( https://www.printables.com/model/147266-89-mm-lysel-slatted-curtainvertical-blinds-weight ) suggest…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Caverna is an excelent Board Game. This print will help with organizing both in storage and playing the Game. If you want to make a remix, feel free to use the enclosed Fusion 360 files. *.f3d Print instructions STL-files needs to be cut,…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
This storage tray allows you to display 25 of your Filament Color System Chips (FCS) in Ikea's Skadis System. FCS Features Easily determine material and brand of past prints. Each chip has the brand and material debossed onto the top…
Print approx. €13.79–€16.85 excl. taxPreliminary estimate for one variant
No supports needed, the screw might need some moving around to achieve smooth motion. Link to the endoscope used (pick the soft 1m cable option)
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for PETGSource material: PET
You wouldn't 3d print a full sized closet would you? Why: A small Project of mine is to make easily expandable function furniture storage solutions. This is a open source project anyone can contribute to and also my first project on…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
This only contains the gcode for doing a true multi-colour print on a Prusa Mini+ "0_0.2mm_PLA,PLA_MINI_1h30m.gcode" does a true multi-colour print for the first two layers. Start with the filament for the main body colour loaded. Then…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
The best and easy to use panel for keys and small documents, always at hand, ready to pick and go. Also easily readeable key tags. The key tags are empty and you can write anything in order to identify the key. I included the panel…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
The Filament Color System allows you to produce color reference chips for to label your materials. Label Features This bracket lets you use FCS chips to quickly label fillament in dry bins, on the wall or where ever you store them. There…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
This storage trays allow you to display your Filament Color System Chips (FCS) in your ALCH setup. The tray is 50mm tall and was modelled from the ground up. It isnt an exact match to Alexander Chappel's design. Storage Tray Features 4x1…
Print approx. €18.92–€23.13 excl. taxPreliminary estimate for one variant
I wanted a way to store my models for transit that didn't rely on magnets or take up space like foam did - and also just looked and felt cool enough to be remodeled into a mech hanger or storage bay as a display. This is the weekend worth…
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for PETGSource material: PET
The original vessel holders on Agilent 708-DS sometimes break. While it is possible to order original parts, it is costly and time-consuming to replace. Hence the printable Replacement of dissolution vessel holders on Agilent 708-DS…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, reading "Solutions are not the answers we want" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . Please…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
IKEA PAX Side Hooks – Convenient Keyboard Storage Solution Maximize the functionality of your IKEA PAX wardrobe with these custom-designed side hooks! Perfect for hanging keyboards, headphones, or other accessories, these hooks are a…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
Wall Mount for Netgear Switch – Secure and Space-Saving Solution Organize your network setup with this custom-designed wall mount for Netgear switches. Built for stability and ease of use, this mount is the perfect solution to securely…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
This is a puzzle cube I created a long time ago, which I originally uploaded to Thingiverse (https://www.thingiverse.com/thing:4159816). There are five different pieces, the goal is to assemble them into a 3x3x3 cube. There are two ways…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
The dissection is original: I generated tens of thousands of random ways to split a 3×3×3 cube into six pieces, counted the solutions of each, and kept this one. It has exactly one solution — not "about one", not "we think it's unique".…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
https://buymeacoffee.com/stealthyscw This model was a made from scratch solution for mounting the Masimo iSirona EMR capture device onto Dräger vents or Philips V60 vents. Masimo does not offer a mounting solution for these units when…
Print approx. €18.27–€22.33 excl. taxPreliminary estimate for PETGSource material: PET
This is a wall mount for the excellent cable management solutions from 24masks and oceanduck. https://www.printables.com/model/69374-gamecube-psu-cover-for-cable-management…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
holder for saline solution container
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
These are the printable pieces to accommodate two OneWheel GT chargers in one box. Only the box needs modification (side holes drilled and IEC jack). Features… - Space for two GT home chargers - Cooling channels around the chargers - 40mm…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for PETGSource material: PET
Recommended Filaments: PETG: https://amzn.to/45juHZv TPU 72D: https://amzn.to/4l08AMi (for indestructable strength, can print on Bambu AMS) If you think there is still not enough wind, go get an electrical fan please. A hand fan can only…
Underware is the universal, open-source, modular, extensible and re-usable solution for managing cables, mini-pcs, usb devices…pretty much anything, anywhere! Watch this video to find out more: Key Points Open-source design - The whole…
Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…
---------------------------------------------------------------------------------------------------------------- Update Optional Storage Box I uploaded all files needed to store all parts for 4 players within the original game box.…
This is a high resolution scan of an antler off of a deer. It's about 12" wide by 17" tall but it can be scaled to fit your printer. I tried to set the scan in a good position to print, but some adjustment will be necessary. A great trick…
I added a new Resource Box design with enhanced edges to get the cubes out easily. Also the box is now split in half to have two trays with resource cubes if you play on a big table. Additionaly the box is held together by two 10x2…
This is a pre-posed model of Godzilla Minus One. Scale the model to your device. The model is available as a rigged model so that you can post the model and the move to print the model. I posed Godzilla to my liking and printed and then…
I created this column to be printed as a short display stand for some product photography on one of my company's websites . Credit is due to this artist and original model for the majority of the silhouette of this model. However, I have…
Welcome to The Skeletor Collection —discover the evolution of the Skeletor project, explore each iteration’s unique enhancements, and find out how you can get involved. 📖 Want the full story? All MK7 details and project updates can be…
SKADIS Citadel Paint storage solution Two versions, one with 6 bottles and one with 7 bottles. Combined they fill a full row on a SKADIS board supports required, see 3mf file
Original Post: 3d scanned by User @AgainstYou (Hans Peter). I thought It was super cool and wanted to make a big ones, but the resolution was too low. After loading it into Fusion360, I re-meshed the model and fixed some of the geometry.…
I added some high frequency details like skin and stone to the original design, so it can be completely painted by drybrushing. For the paint job, i primed it black, then added some blue, green and light-blue paint with a lot of water so…
Please post your makes 😁 Description Easily mount and unmount things off of your printer. Should work with any printer that uses 2040 V-slot aluminum extrusion. I was told that it won't work well on T-slot extrusions. Instructions…
Accurate measuring tools are essential for successful 3D printing of anything that mates with anything else. While these calipers aren't as accurate as the real McCoy, they are handy when your Mitutoyo's are hiding elsewhere. They have…
This is a medium-difficulty puzzle that I enjoyed solving many years ago! The goal is to remove the center ring. No force is necessary. I designed it primarily in Fusion 360. I printed it with Reprapper grey and Atomic purple PLA. Note…
A funny desk item that is ideal if you have annoying work colleagues that disagree with you on everything. Printed in PLA with color change enabled in Prusaslicer. Grenade prints in several parts only the top part will need supports.…
This is a high definition recreation of the original and beloved Designer Lithophane Moon Lamp by Frank Deschner ( @FrankDeschner ). M aybe a gift. This is easy to print. This is an eye catcher. This is a remix. Globe: 21 cm / 8.2 in…
5/10/23 update: I also created a new alternative remixed version using toothbrushes/brass bristle brushes that looks like this, which you may prefer if you don't like the paper towel solution in this design. If you have a spare…
This storage solution aims to get all main game content into the core ROOT box, with a focus on faction organization, component separation, and ease of use. You can fit all of this: Root Main Expansions Riverfolk Underground Marauders…
Prints without supports (or brim if you sink the model down far enough). You'll need to sink the model down in the slicer settings a bit.
Usage The Backbone(r) enables Handy 2 owners to use the STANLEY® MAXSTEEL® Multi-Angle Vice without having to directly clamp to the hardware. 1/4 20 (12mm long) screws are used to connect the Handy 2 to the Backbone(r). Two models have…
A friend asked me to print it for him, we play with him from season 1. But the model that was in the public domain I did not like, spent a couple days and made a version that now I like. Printed it several times on Anycubic phonton mono…
As the Z-offset measurement on the Elegoo Neptune 4 Pro occurs very close to the print bed surface, contaminants on the nozzle can quickly lead to inaccuracies in the system-measured Z-offset. Any existing material residue causes the bed…
An alternative to trays on the desk this wall mount solution for the Prusa MMU2S Filament Buffer reclaims desk space and makes filament management easier. There are also printable buffer barriers that have more fingering room making it…
I made a new fixture for the extruder and ABL sensor that fits the Ender 3 S1 Pro. The original 4010-part cooling fan is used to cool the cold end now. You have to adjust the ABL sensor offset before using this mod. X-axis offset: -47.7mm…
If your extruder keeps stopping mid print and seems to magically start again after docked, most likely the cable is coming loose. Over time, the cable connector will slowly back out of the dwarf-cover-base and put strain on the white plug…
Vase "Meek" in a minimalist and modern look as a unique eye-catcher in your table decoration. Striking due to its unusual shape, which is a real eye-catcher for every room. 🔹 DETAILS 🔹 - quick and easy print, with settings guide! -…
UPDATE 22 May 2026 Click here for the New Model for Finspan with Sharks and Reefs that supports sleeved cards. The model below suits Finspan Base Game. Please be aware that the remix by Mavis does not support premium sleeves. FINSPAN:…
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: The alignment of the magnet and encoder is the most critical factor for the mechanical precision of the steering…
Automatic fish feeder Updated version. Improve the drill shaft mechanism and reduce friction. Parts List: Nuts & Bolts M4 X 20mm Screws X 2 N20 DC Gear Motor Miniature High Torque Electric Gear Box Motor X 1 Arduino nano X 1 Oneway relay…
Since I've been printing all of these minis for Gloomhaven, I realized that I needed a good way to store and transport them. There are a bunch of excellent mini storage solutions out there, but I'm picky and wanted one that was slightly…
Eppendorf Tube Rack with Spring Mechanism Available sizes 2x16, 4x16, 6x16, 8x16 3x8, 4x8 3x6 Description Tube rack designed to hold your Eppis tightly with springs. I find this useful for storage of large collections of tubes, to avoid…
LaceLocks: The Ultimate No-Tie Shoe Solution Say goodbye to tying your shoes with LaceLocks! Designed for ultimate convenience and ease, LaceLocks allow you to effortlessly put on and take off your shoes without ever needing to tie or…
Custom Quick Swap Plates for VEX. These use 10x3MM Neodymium magnets and are superglued into the plates. You will need to either have a Multicolor 3D printer, or use a M600 Macro to swap between colors. The plates are blank so they will…
Alternative solution for BMW E46 Double Din AC Relocation Bezel. After a Double Din radio replacement you have to move the AC unit on the lower frame but the unit doesn't fit that well. This is a simple solution that uses your original…
Following the print settings specified in the Sherpa Mini github , print the main body, idler arm, and front cover. Also print the stock rear housing from the Sherpa Mini github . Remove the modeled-in support from the switch recess in…
An archive of Zach Freedman's infinite storage solution. It's open source and he expects you to archive + modify + use it. So… have fun! If you like this don't forget to look for Zach's channel in youtube and smash that like button and…
Brick Man Toilet Paper Holder remix by Johnny Solutions The main reason why I have made this remix is that I am not allowed to drill the new holes in the wall so I had to use existing ones with the 137,8mm distance between them. That…
Description: Declutter your workspace with my under-desk cable management solution! This 3D-printed accessory is designed to keep your cables organized and out of sight, providing you with a clean and organized work environment. Features:…
Update 2025/12/25: Uploaded versions for 4u*4u boxes. I'm picky and didn't settle for buying a storage option for beyblades. Files are modified from base to save some material but still be largely Gridfinity compliant.…
Add storage while reusing empty filament boxes with a scalable, wall-mounted solution. For peace of mind, I mounted the top holders with screws and then used command strips every other which has held up well so far. Each bracket includes…
This model tests your printer's maximum gcode resolution. With your normal speeds and settings you can increase your Gcode resolution until either your MCU cannot keep up or your Baudrate is too low. How to do it: Decrease the values…
This Design is made in 1952 by Kay Bojesen. as i understand it, The drawings is free to share, but not for selling or give-away The design is protected under licence from Rosendahl Design Group A/S and is strictly for personal used and…
This two-tiered 3D printed makeup organizer boasts a clean and functional design, perfect for decluttering your vanity or beauty counter. The upper compartment features several compartments in various sizes, ideal for storing lipsticks,…
I've designed a dice tower that also doubles as storage for your dice and a single mini, perfect for Dungeons and Dragons and other tabletop RPGs. I've built in a knurled ring around the bottom to easily rotate the inner tower to expose…
I really liked the original design of this filament dry box, but I didn't like the original mounting solution of the model, because I wanted to quickly change between diffrent boxes, with diffrent filaments in them, which was impossible…
Introducing The Bladder Buddy, the innovative 3D printed solution for drying your Camelbak or other hydration bladders quickly and hygienically. This unique hanger features an internal expanding mechanism that securely holds the bladder…
GRIPPYSHEET STUDIO IS NOW AVAILABLE AT https://studio.grippysheet.com GrippySheet grip tape solution with innovative ConeControl technology /s Recommended print settings: 3 wall loops 3 top/bottom layers (2 for bottom will also work for…
There are a few cereal drybox solutions out there, but I found them lacking for various reasons, mainly that the Jessie spools that I'm in the habit of using are too wide to fit. So I wanted to design something adjustable, and preferably…
The 3D printing community is obsessed with printing the perfect Benchy, but wheres the artistry ? The Character?? This model has been pre-sliced with a 1.2mm line width and 0.6mm line height, and is brimming with imperfection, ensuring…
Motivation: I've had a lot of expierence with HEPA filters and the fact that the market is flooded with knock-off products which do not fulfill any given international standards. An average human cannot tell the difference between a HEPA,…
I designed an alternative first layer box insert for the board game, Vampire: the Masquerade - Chapters. I made this with a few design goals in mind: Make setup & tear-down faster and easier Accommodate sleaved cards Organize the…
Easy and extremely cheap way to organize cables, it can be guied or screwed on any surface where you want to route a cable and hold it with a zip tie. It can be easily upscaled to fit your needs
Gridfinity everything! I couldn't find Gridfinity holder for Ender 3 v3 SE/KE with magnets so i made my own :)
Store up to 4 standard size 65mm whoops (or 5, it's possible to slide one more into the center). Includes an additional compartment with optional insert to separate batteries into two groups. This compartment can also be used to store…
The Centauri Carbon Canvas Compact (CCCC) is by far THE MOST COMPACT SOLUTION FOR CANVAS . It has a number of key features: Adds only 7 cm / 3 inches in height Includes lighting Replicates the CC top surface, allowing other items (e.g.…
Did you drop your cardboard filament spool? Did it break? Well, you have been naughty and now you are in trouble. Luckily, help is here! Meet the "Spool saver"! A 3D printable hub that will bring a cardboard/all-paper spool with a…
---------------------------------------------------------------------------------------------------------------- Update V2 The initial model included overlapping volumes which did slice correctly in an older Prusaslicer version but not in…
This 3D printable storage solution consolidates all components into the 6th Edition red box, saving space and streamlining setup and cleanup. Designed by me with Tinkercad, this organizer keeps your tiles, cards, ships, and player pieces…
##################### ENGLISH ####################### 📁Files included: STL and STEP files for kp3s pro v2 original fan STL and STEP files for 5015 8500 RPM Gdstime fan*…
Note: I use an X value of -6 on line 10 and 25 of macro.txt for my neptune 4 plus. Copied from the original model : As the Z-offset measurement on the Elegoo Neptune 4 Pro occurs very close to the print bed surface, contaminants on the…
Anti-Sag! The most Reliable and Permanent Solution for CORE One Extruder Cable. With or without MMU3! Improved, inspired and remixed from Alienbliep 's idea, with origin in hachleitner 's design. All 3D models are built from scratch ,…
This is just a slightly modified case so that it works with the mounting solution for the Sovol SV06 by bassamanator ( https://www.printables.com/model/431736-sovol-sv06-frame-mounting-solution)
Just a simple hook that allows clean PTFE tube mounting on walls or shelves. The mounting hole is designed for screws up to 3 mm. .step file included for customization. Print instructions 0.2 mm layer height, infill 20% GRID and material…
I opened up a brand new copy of Camel Up (Second Edition) a few days ago and found that the pyramid that dispenses the dice was dropping multiple dice almost every time. When I searched about it online it seemed like others were having…
Below is a list of the tweaks which I made. These include small changes to the model itself and MMU painting in Prusaslicer. Clay: mirrored tile and tiles with relocated trees, bushes, shed etc. Ore: mirrored tile, winter version, and a…
Description: This is a solution for creating a more stable map for your game of TI4. It consists of six milty draft shaped sections, that holds the pieces of the map and one center piece for MR. Appart from making the map stable, it also…
I should note, I haven't tried this with the stock extruder. I use the OMG extruder v2 in a bowden configuration. This has been tested with a direct drive set up as well, and works with the motor mounted in any direction except for the…
