389 models
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Handwheel for use with the 30mm propane gas regulator fittings typically found on UK caravan's. New version available here: https://www.printables.com/model/490632-30mm-propane-handwheel-adapter
Spanner to screw a yak attack locknload base tighter than you can with your hands.
I have a eurobox that I used for travel, bin which are 9u height fit perfectly inside. This is my solution to store my set of “small” spanners (6-7, 8-9, 10-11, and 12-13mm) Nothing special to print, mine is using standard quality (0.2mm)…
ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395 /314580358088 /314673977931 PV tool for use with both MC4 and EVO2 style solar connectors. ⚠WARNING⚠ Tool was design based on…
This is a box I designed for my kids to have fun with and practice their wrenching skills so someday they can do it for real. I tried to design everything to be as realistic as possible. The bolts are designed to look realistic, but they…
I've created a modular tool holder inspired by the toolbox widgets but with my own improvements. Theres a dovetail that allows to add or remove a holder to meet your needs. Can be used for spanners and screw drivers, perhaps even chisels.…
Flexible spanner holder for spanners in different sizes. The asymmetric fork part of the holder make it possible to have different setup in your spanner drawer. Gridfinity is an open source storage system developed by Zack Freedman. For…
This is a pegboard mounted spanner/wrench mount. It's made to fit one of these ( https://www.amazon.co.uk/gp/product/B003BV77T2/ You may need to copy-paste the link) sets or it's equivalents. There's both a pegboard mounted version in the…
Set of wrenches/spanners with the sizes: 6 - 7 8 - 9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 Print settings: Layer: 0.25mm Draft or 0.28mm Superdraft Infill: 25% Nozzle: 0.4mm Filament: Esun PLA+ (PETG should work as well)…
Gas cylinder spanner for camping or barbecue gas cylinders with spanner for gas pressure reducer, 30mm, 18mm and 17mm. Dimensions: Width 168.17 mm Height 8.00 mm Depth 56.20 mm Print: PETG Filling: 100% Filling pattern: straight No…
A model I made for the key chain competition as a tribute to my mechanic brother who is always tinerking and always missing his 10mm
A remix of a very nice model. This now fits a full set of spanners from size 6 - 32mm. E.g. the “BGS 1196” set fits perfectly. Printed in two parts, the large one just ever so slightly fits for the regular sized BambuLab printers (256 x…
Simple and compact mount for flat wrenches. I designed these for the JAEGER 24pc IN/MM wrench set (https://amzn.to/3CKJVat). Use the included Fusion 360 file to customize for your wrench sets. Use a simple color change to create the…
A 10x4x6 Gridfinity Tray to hold spanners from 22mm down to 5.5mm in 1mm increments (except the 5.5mm) It Fits my Bacho spanners nicely but doesn't fit my RS pro spanners (they are too long). Its not quite stackable The 22mm spanner is…
This is a remake of the fully print-in-place adjustable wrench by Daniel Noree. I was testing printer settings on his wrench and didn't want to wait for the entire thing to print each time (all the important stuff is in the…
Small tool to adjust the bed corners and hold the knob in place while tightening the lock nut. I found that adjusting the level of the bed was a bit of a struggle for me: Because I have big fingers and those little knobs are difficult to…
A lightweight "aero" 16mm open wrench/spanner. Tested it and it didn't work, it slips when under load.
I was searching for a solid tensioner for my clothesline in the basement room but didn't find a thing i like. So i created one witch meets my expectations. This little thing is very easy to print and tensions ropes and lines for camping,…
Use a strong print file with 4 walls and 20% infill or higher, print flat as is
# Tool free tensioner Name and specification | Quantity -- | -- SHCS M5x30 | 4 M4*0.7 T Nut | 4 HHCS M4x16 | 4 D4x7x1(4x8x1)Flat washer | 4 M5 Hex Nuts with Lock | 4 bracket | 2 tensioner | 2 bracket image | 2 tensioner image | 2 wheel |…
A small spanner (wrench) for SMA connectors for SDRs etc. Obviously it's not super-strong, but it's useful for tightening or undoing the connectors to finger-strength in tight spaces.
Originally made to house Gear Wrench metric set (see original thing). I remixed to fit on my print bed (Tevo Tarantula Pro - 235mm). Had to remove the slot for the biggest spanner. Remixed from: https://www.thingiverse.com/thing:4689946…
Wenn sich nach einiger Zeit der automatische Auslösemechanismus nicht mehr funktioniert, muss die Feder im Inneren nachgespannt werden (Vorsicht). Das hier bereitgestellte Werkzeug kann mit einem großen Schraubenzieher genutzt werden, um…
Loved the original holder, but it was a bit snug for the larger wrenches, so I made my own. This one fits three larger wrenches and includes a Freecad source file.
Tool holder for 26 pieces Combination Spanner Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 135mm W - 49mm H -…
Einfach ein oder zwei dieser Räder zwischen den oberen Koppelriemen der Z Achse klemmen. Die Riemenspannung kann durch außermittigen Versatz erhöht werden. Das Riemenrad bleibt automatisch in Position und ist wartungsfrei.
Designed for the local FD, this hose wrench has gone through a couple iterations. This design solves a few problems with commercially available options (especially cost), giving firefighters a pair or wrenches that are easy to keep handy…
This model is compatible with the lego system.
A remix of the awesome Spanner / Wrench holder linked. I wanted to have my mounts printed to the model itself and not having to superglue parts together. Printed the model on a raft. I think you should be able to print it with supports…
Also available on Thingiverse .
A hollow rocket that should be printed in vase mode.
A spanner to remove the threaded inserts at the top of your Suntour MTB forks for maintainance
This is another tool holder using Sy's peglock system. The rack and peglocks can be printed without supports: The internal overhangs in the rear of the rack required no supports when printed at draft quality (0.32mm layer height) using a…
Tool holder for 12 pieces Combination Spanner Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 142mm W - 51,930mm H -…
TRUMA GAS REGULATOR SPANNER 50020-86800 Schraubhilfe für Gasfilte - Truma Ersatzteil Nr. 50020-8680 Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 40% Filament: Das Filament PETG Black…
Just like the original but everything is smaller.
Ender 5 Riemenspanner X & Y Ich habe den Riemenspanner von kmxs mir angeschaut und mir gefiel die Kompaktheit des Spanners. https://www.thingiverse.com/thing:3601830 Ich habe mir den Body etwas angepasst und daraus eine Variante für X und…
This spanner holder was designed to maximise pegboard efficiency while keeping tools neatly organized and easy to access. It holds 8 spanners , with each one clearly visible for quick selection. Thanks to its compact footprint, it doesn’t…
A convenient and space efficient way to store your 15° offset spanners/wrenches. Designed to fit into the Honeycomb Storage Wall by @RostaP , by using m4 or m5 inserts. Alternatively it can also be screw directly to the wall. They hang…
Eine detailierte Anleitung liegt diesem Projekt in PDF-Format bei. Support wird nicht benötigt. Drucken am besten in ABS/ASA. PETG und PLA sollte aber auch gehen. Druckausrichtung (nicht ganz unwichtig) ist in der Anleitung erklärt.
I printed out a similar design I found on Printables.com, but unfortunately it did not fit my older craftsman style wrench set. So I designed this one to my own custom measurements from the ground up. It follows a very similar style, so I…
Ein Tool zum spannen bzw. verkürzen von Seilen oder ähnlichem. Optional gibt es noch einen Sicherungsring dazu - dieser verhindert ein lösen des Tools wenn das Seil die Spannung verliert. Für Seile bis ca. 8mm (Bild: 4mm) A tool for…
made it for my tool panel
In order to achieve the best results, use the following settings: High infill density - above 40%. High inner wall count - 4 or more layers. Strong infill shape - such a cubic. I use the spanner to open 20L chlorine drums for my pool.
Riemenspanner / Belt tensioner
I designed this tool to remove the top caps on my entry level Suntour fork.
Have spent more than a little time trying to produce a mount for my spanners, wanted something to grow when my collection did so had to be individual but only had a small foot print, as well as showing the size of spanner. My first…
My spanner collection inside my portable toolbox was always a mess. Each spanner dispersed in the toolbox box and hard to find. My solution to the spanner mess is to bring them together into this 3D printed spanner carrier. The spanner…
See the video here:
Was after a small footprint Gridfinity organiser for my stubby spanner set from Super Cheap Auto. The holder itself fits in a 2x1 grid space, printed in just over 30 minutes on my P1S. Have included a step file for making any tweaks.…
Angle degree torque gauge for 1/2 inch spanner extension usually used to tighten cylinder head stretching bolts. It's a snug fit onto the ½ extension and the dial is sandwiched between the bottom ring pressed onto the upper hand piece. To…
Just a spanner for a archery button. Category: Tools
This was modelled after some left over shark teeth tool organiser. I needed a few more teeth to organise all my spanners and after cutting the main pieces to size I had a couple of teeth but still had 9 spanners without a holder so I made…
Eine praktische Hilfe für jede Werkbank! Der Kniehebelspanner ist sehr stabil, und in PETG gedruckt! Die Außen Wandung habe ich mit 15 Linien gedruckt so wird der Spanner richtig stabil! Der Gewindeblock sollte mit einer Stützstruktur…
Bei uns im Garten scheint sehr viel und lang die Sonne, da haben wir ein kleines Party Zelt erstmal geholt, damit unser Sohn etwas schatten hat. Leider waren da keine Seilspanner mit dabei….na ja bei dem Preis. Aber wofür hat man ein…
Mit einem 30mm Spanngurt ohne Haken kann man super Rahmen und Kästen verleimen.
This is a customisable rail that can hold spanners or other similar items. This came about because I printed a couple of https://www.printables.com/model/139831-wrench-organizer/files and didn't like the result. Partly because the fit…
A Spanner for the lid of Fermzilla range of fermenters by Kegland. I've only tested it with the all rounder model but I think the lids are the same. It may work for other models as well. Print in PLA as its a little stiffer than PETG.…
Remixed the remix for even larger wrenches
The salt cap of Bosch (and other brands) dishwashers notoriously gets stuck because of solid salt forming below it. This spanner eases reopening the reservoir to fill with salt.
I kept having to go into my toolbox and opening my wrench set to get an 8mm wrench for printer adjustments. I didn't want to buy a wrench, so I designed one, and then I decided to just design a full set. This is a full set of wrenches…
Made this spanner set drawer insert tried to make it versatile, i tried a few different spanner and all seem to fit. Does not fit rachet spanner, check out my other model if you want a tray for rachet spanners! There are 2 versions one is…
NOT FOR PERSONAL SAFETY / CLIMBING (I don't know if this sentence is neccessary because this should be clear ;-)) This is a rope spanner / tensioner for 8mm ropes. It should be as simple as possible to mount/remove the rope. Update V2.0 -…
Simple 11mm F Type coax spanne. Based on the tool supplied by virgin media. Someone might find it useful.....
My spanner collection inside my portable toolbox was always a mess. Each spanner dispersed in the toolbox box and hard to find. My solution to the spanner mess is to bring them together into this 3D printed spanner carrier. This 3D…
This is another pegboard hanger for wrenches. I couldn't find one that was just simple, organized the wrenches in a neat line and fit in the pegboard. You can rotate the angle of the print to reduce support needed and increase strength. I…
sliding tensioner for diverse cords, strings, ropes and threads.
This tool is the result of an in-depth research project, centred on designing a tool to assist users opening and closing plastic jerry cans. It incorporates the current best practices of ergonomic handle design, to benefit those with…
Anzahl Wandlinien:5 Obere Schichten: 4 Untere Schichten: 3 Füllung: 35% Füllmuster: Gyroid Category: DIY
This is a remix and merge of the Spannerhands 50 mm core and an ingenious desiccant box for filament spools designed by https://www.thingiverse.com/jjlionberger/
This wrench holder was created to fit 7 small to medium wrenches with minimum material and maximum strength. Enjoy !
Support required to build plate for the spacer as it has lugs on top and bottom. 4 Perimiters 30% infill (for strenth)
I had printed my frame lock tiles on a textured bed so they didn't turn very well when trying to lock them. So… I decided to create a spanner for not only the frame locks, but the playtile locks too. There is one handle and the 2 types of…
These are a few simple corners for 25 mm tensioning straps, with which you can clamp e.g. frames or guards. They are not particularly sophisticated, but they do the job. Print with enough infill so they can stand high forces (I did 70%…
Children's ring spanner suitable for Bosch tools adapted (from https://www.thingiverse.com/thing:2179741 ) for the screws from Bosch / Klein with a wrench size of 20mm edit: combination wrench added…
a compact stubby spanner rack, designed for tool box or wall mounted deployment , it has room for 4 10mm x 3mm magnets to keep it anchored in the tool box, or 2 screw holes for wall mounted. It will hold 10mm, 11mm, 12mm, 13mm, 14mm,…
This is my take on the beautiful and useful Spannerhands spool system . Parts are collected from various things, modified by myself or newly created. Two new features are: detachable gelbox (no need to pour gel beads into or out of the…
Several parts were merged in order to save weight on these parts of the EVA 3 printhead. Hence, it looses it's modularity, but also sheds lots of weight. Not including the no longer needed screws and heat inserts the weight went down from…
If you have limp wrists, like maybe, an electrician, and want to install a toilet seat but don't have enough chooch to get it skookum enough, you need this. Print instructions I printed it in carbon fibre for maximum victory.
Own a Ford and sick of always needing a 10 mm? Well worry no longer, simply add this handy keyring to your keys and you'll never be wanting again.
Ever lost the tool for mounting your valve extensions? Print this! Print it with a very high infill as it strengthens the structure! (printed mine with 0.95 infill; 0.15 layer; ABS, 243/100°C)…
I previously made a tray for normal spanner but it dident fit the rachet spanners so i made this which is a bit bigger. Check out my other model if you want a tray for normal spanners!
Z-Riemenspanner für einen X5SA (Pro) ACHTUNG: Ich habe eine neue Version mit einem federgespannten Arm als Remix hochgeladen: https://www.printables.com/de/model/290599-tronxy-x5sa-pro-z-feder-riemenspanner-belt-tension Die Riemenräder…
A small rack designed to hold the double open ended set (8 piece) of ~3mm thick LAOA Spanners/Wrenchs ( https://vi.aliexpress.com/item/1005007507050465.html ). The Small Rack is 3 Opengrids tall (84mm's), the Tall Rack is 4 Open Grids…
This is the Stemfie3D wrench tool for nuts and screws.
Designed a little box that will hold the spanners for the Snapmaker v2 Spanners, collet and bit box. This box also conveniently has an open space that will house any additional accessories you may have
small, handy bow sander You need: - the 3d printed parts from the file - hexagonal M4*20mm screw - 2x hexagonal M4x15mm screw - 2x wing nut M4 - Sandpaper with 265x10mm The sandpaper can be slightly tightened or loosened using the screw…
This is a remix of the ingenious Spannerhands Spoolbox. I added a silica gel box, an opening for a hygrometer and a mount. Also some other parts are slightly changed. I will add more information later. My Setup Category: 3D Printer…
I needed a miniature spanner to hold a lock nut in place when replacing the elements of a Dualit Original toaster. The instructions provided say use a 6.5 mm spanner which is not in my metric set. Fortunately a little bit of CAD and 4…
I tried downloading some models but they wouldn't fit well (usually too wide). This one has a bit longer body than the plastic ones typically found around - for easier manipulation but at the same time not too long to prevent interfering…
EN: I needed a small rope tensioner. After a few tries I came to this little part. It consists of two parts that can be plugged into each other. To loosen the tensioner simply pull the two parts apart again the rope is very thin. If you…
Slimmer gridfinity spanner holders with a few options, original slot size, slightly wider slots and a very wide 2 holder
Zusammenbauen: In jeden der beiden Spindelböcke von oben eine Mutter stecken. Beide Spindeln von außen durch das Loch schieben und durch die Mutter schrauben. Die Druckstücke von oben auf die Spindelspitzen stecken, die offene Seite zeigt…
Two spanner wrenches. Big: 87mm Small: 72mm Measurement is for outside diameter of the “nut” or ring that you're turning. Print settings - PETG 10 walls 3 solid top and bottom layers 30% triangle infill Solid layer every 10 layers Strong…
Tool holder for Combination Spanner Set 8 pcs.. We provide three versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Pins for IKEA Skadis peg boards…
PHINEAS FLYNN-spanner - Phineas and Ferb - WALL ART
