429 models
A revolutionary tool that allows you to paint and stack doors & trim with ease. Now a contractor or homeowner can create a controlled environment in one area of a room. Get more done in less time and less space. Inspired by the ‘Stack…
Print approx. €11.93–€14.58 excl. taxPreliminary estimate for one variant
[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for PETGSource material: PET
The stand should fit the majority of the 8 wide speed champ cars. It's just wide enough to fit the McLaren Solus GT on the bottom and the Merc F1 is too long for the top to give you an idea for scale. The tabs on the ‘Car stacker plate’…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Update 4/Feb/2024 Light Version and Extra Light Version added. Diamond painting - Trays and Stacker Printing Trays I recommend to print the trays in PETG for better durability. Layer high: 0.20mm Printing Stacker The stacker can be…
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for PETGSource material: PET
Helps you stack two or more IKEA LACK tables on each other without screws. Print instructions This is a IKEA LACK table mount for stacking two (or more) tables on top of each other, without screws. Feel free to remix this, but please…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
A really simple tinnie stacker. Pop it in your fridge and keep your favourite tinnies from rolling about. Pin a few of them together, then have a beer. Print instructions The diameter of the cups is 67mm, which should accommodate most…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
Golf Ball Pyramid Tray for 30 golf balls. It does also support pyramids of 14 balls and 5 balls I printed in green pla
Print approx. €6.80–€8.31 excl. taxPreliminary estimate for one variant
ATTENTION - NOT Tested Description I just liked the design by eddytheflow from thingverse.com, but his model was too tall for me. I needed about 10 cm more space above the printer. I decided to model my own with the required height. But…
Print approx. €9.65–€11.79 excl. taxPreliminary estimate for PETGSource material: PET
Stackable dice containers for your dice and miniatures. Sized for the largest dice I've found (gemstone dice that are larger than a typical 7-set). Feel free to reduce size in the customizer. The figure storage container is a bit taller…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Microserver Gen8 SSD stacker The optional 7MM stacker so that you can stack two SSD's on top of each other. For use with Microserver Gen8 SSD bracket for four SSD's. Has text “7mm drives” printed onto the print. Made with Rhinoceros 3D…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Well known soup and bean manufacturers who's name rhymes with Dines are too good for stackable cans. After surviving an avalanche of Tomato and Basil soup that came tumbling out of the cupboard I decided I had hand enough. Bring order…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Microserver Gen8 SSD stacker The accompanying 9.5MM stacker so that you can stack two SSD's on top of each other. For use with Microserver Gen8 SSD bracket for four SSD's. Has text “9.5mm drives” printed onto the print. Made with…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Simple spacer for stacking your RLC ( Hot Wheels Red Line Club ) Cars. No supports needed.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
This is my attempt at designing a supportless shoe stacker with low filament usage. PLA compatible! I plan to play around with the thickness of the walls/ceiling, to see how low I can go before it gets unstable. I also want to make a…
Print approx. €4.91–€6.00 excl. taxPreliminary estimate for one variant
Background: I wanted an easy way to stack empty 5 gallon water jugs while keeping most dust out but still letting air flow to keep mold from potentially growing. Take a stroll with me as we walk the path I chose to travel. About: This…
Print approx. €5.12–€6.26 excl. taxPreliminary estimate for one variant
print 2 and interlock them, then insert into the holes in the spool. may work with creality spools as well. Other brands
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Apply some adhesive to the underside of the model and attach it to the corners of your table. This way, you can stabilize stacked tables while also keeping the ability to break down your stack.
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
Canon Extenders or Teleconverters can usually not be stacked without a spacer between them. You can solve this problem by using any extension tube. By doing so you change the backfocus between the teleconverters and therefore loose the…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Description You can screw the stackers to the legs of the upper table from below. Holes with a diameter of 4 mm are prepared. The screw holes are countersunk by 32.5mm, so you can use shorter screws. The diameter of the holes for the…
Print approx. €12.70–€15.52 excl. taxPreliminary estimate for PETGSource material: PET
Extra ~10mm between set to fit Prusa Mini+ base from https://www.printables.com/model/63483-prusa-mini-base
Print approx. €5.52–€6.74 excl. taxPreliminary estimate for PETGSource material: PET
A simple and scalable hard drive mount for external applications. Print 2 per drive and stack them up. If you stack 4 HDD's high you can attach one or two 120mm fans. Then stack blocks of 4 HDD's until it feels unsafe. If only using 1 or…
The Airlock Dock & Stacker slide onto the lid of the PolyDryer™ Box and are held with a friction fit. The airlocks can be press fit into the dock and are also held in place with a friction fit. The Stacker version allows you to stack…
SSD Stackers (as well as the old "Dual SSD Stackers") are meant to allow you to stack and mount two or more 2.5" drives (SSD or HDD) together, and then be mounted in desktop computer cases that have mounting holes for only a single drive…
Baking sheet stacker with long ledge and heavy duty base clip
Here you can find an organizer for Gravitrax rails. They are available in the three common rail lengths. The stackers fit on the original Gravitrax playfield. Happy printing!
This is my version of a shoe stacker to attach to the wall. You can attach as many elements as you want on top of each other. Of course you can also attach them next to each other. Print position of the mainbody. Its important to print it…
Modified the original to convert into staggered battery storage for AA, AAA, and 9V batteries and modified a few other things. The photos are not the final design. It's there just to show the staggered stack. I'd recommend not dropping…
11/7/2021 Update: Added 5.5 Oz Lid with tighter fit (Catfood Can Lid 5.5oz v6.stl) 11/6/2021 Updates: Added 3.0 Oz Lid with a better snap action. (Catfood Can Lid 3oz v11.stl) Added 5.5 Oz Lid (Catfood Can Lid 5.5oz v4.stl) Added Stacker…
Simple print vase mode pot made as a design test using tinkercad, download, share, learn, grow! Sample print printed at 0.2mm layer heights using frosted copper PLA! Print instructions Print using vase mode option in your chosen slicer,…
Stack your hats! Makes a great gift if someone you know needs to stack some hats! Printed with PLA.
Remodel of Tick Tock's Harvest right short tray stacker to make it snap on firm in place. The short size is perfect for most uses.
This is a small hair stacker used when tying fly's for fly fishing that gets the ends of animal fur hair all aligned. Can be made using PETG, PLA or whatever you would like to use
This is a medium hair stacker used when tying fly's for fly fishing that gets the ends of animal fur hair all aligned You can use PETG, PLA or whatever material you would like to print the hair stacker
Small fixture to stack two coffee and expresso mugs in kitchen cabinet. Sized to fit IKEA DINERA coffee and expresso mugs, but may fit other mugs. STEP file provided to support remix to fit another size mug. Print Settings: PLA Layer…
Containers to store Weck Rundrand lids, as a stack. For RR 40, 60, 80 and 100
I baked two tray cakes for work and needed to transport them safely. This is why I needed to come up with a solution. May I present the baking tray stacker. Printed with PLA and fits on those standard baking trays with a seamed edge.…
Yellow Reach Stacker (Basic) - Fully Functional 3D Model(1:30 scale) This is an assembly model which requires use of glue. Reach stackers are the giants of the container yard—precise, powerful, and endlessly fascinating. Their ability to…
***Added a new V2 with thinner walls and larger interior. V2 is compatible with V1*** 1st published print so be nice :-) I have a few other things that I have worked on for RC cars (traxxas maxx) and some odds and ends around the house,…
simple stacking display for Hot Wheels Basic and long sizes infinitely stacking
I remixed the TickTock short tray stacker to eliminate the binding in the corners on the newer Harvest right trays. After some fiddling around, I arrived at a crudely modified design that seems to print well for me with no support.
This is a large hair stacker used when tying fly's for fly fishing that gets the ends of animal fur hair all aligned You can use PETG, PLA or whatever material you would like
This leg extender/stacker is designed to fit over the corner of the table top prior to screwing the leg in. No hardware necessary! I have uploaded three different heights (65mm, 80mm, and 100mm) and have included the Sketchup file as well…
Designed in Solid Edge and printed on (somewhat modded) Ender 3 V2 with PrimaSelect PLA Pro filament (10-20% infill, but I usually print with 6+ outer walls because I really like sturdy prints).
Stack your shoes. Quite large to accommodate mens boots. Unfortunately untested. Hope your layer adhesion is on point! Print in PLA, assemble using superglue (cyanoacrylate). Print the hub on its front (with square hole facing plate)…
This has a modified single 3dversktan faceshield headband that is then used by the openscad to make a stacked version to print out more than 1 at time see https://3dverkstan.se/protective-visor/protective-visor-versions/ for his original…
This is a model that allows easy tray stacking for a StayFresh Freeze Dryer. It fits over the corners of a tray, and allows placing another tray on top. The OnShape model allows configurable spacing between trays.…
This is a sort of copy after Montessori Rainbow Tunnel Stacker and Puzzle that I designed to print it for my kid but I have't have the change to get all the colors that I need. Maybe you guys have the colors and give it a try.
This euro coin collector features 9 vertical compartments for efficient stacking and organization. It holds all standard euro coins (1c, 2c, 5c, 10c, 20c, 50c, €1, and €2) plus an additional slot for a second 20-cent stack. Dimensions:…
Simple model used to stack the US General mini toolboxes. I made it so it can be printed easily on an A1. brace in the center serves to divide the upper area of the lower box as well as push the sides out in all directions to make a…
I have 3 External 2.5" HDD (Western Digital) that are always laying around separated. I decided to make this holder that I can always have them 3 together. 2 HDD with dimensions 82 x 110 x 22 mm 1 HDD (middle) with dimensions 82 x 110 x…
A few people have been talking about keycap pullers with a stack component in the Mechanical Keyboard space. I quick designed one in tinkercad as none of them were free. So heres one thats free. The purpose of this is to be able to…
I made an egg stacker / holder for a YouTube video, and I will leave the print files here. If I have time, I will post a creation time-lapse here. The design is made for Small, Medium And Large Eggs but take in consideration that some…
This shoe rack is strong, holds mens heavy bicycling shoes with no problem, uses minimal filament and look clean and polished. Hopefully you find this model as rad as I do. The standard plate which most should print hits the print goal 2…
I wanted a way to stack 3 Lack tables together for my enclosure and not have to rely on screwing into the thin walls of the legs. You can also just use these to make shelves out of lack tables too. I printed in PLA and it seems to be…
Just print as is, without supports. I've used 0.32mm layer.
The idea is that its attached with zip ties and left on the truss. Fit 48-50mm trusses with 238-240mm pipe center. The height of the stacker is made to be able to hammer in the sprints. If your looking for other rigging accesories feel…
Print is designed to stack $10 worth of US Quarters for sorting/wrapping, quickly. There is a slight gap at the top, approximately one quarter size, as to provide space for moving the coins. Double check the value when stacking $10 worth.…
We created some feet for the IKEA Lack tables to allow you to stack the Lack tables with the wood screws that are included in the kit. For more information, please view the Instructions PDF below.
Safely stack the Meanwell Power supplies. This was originally created to stack power supplies in a CG1500 box. The addition of a terminal cover to help prevent fingers or objects accidentally touching live terminals (does not account for…
I saw FunFunBoys runner stands, and thought i could use a couple, but i wanted a semi-clean way to store them when not in use. This is the first thing i came up with lol. They're meant to stack opposite of the previous stand. So one that…
The small lip (top) and short insert (bottom) prevent mugs from sliding off of one another. EDIT: Added two new variations : Variation 1 has the center punched-out, using 25% less material and reducing print time by ~16% (On my personal…
This is a way to house and stack multiple slim CD/DVD drives. This is for drives (WXDXH) 5 in X 5.1 in X 0.5 in This design consists of 3 parts CD Bottom With Pegs - This is the foundation piece that will be both bottom of the stack and…
I use it for first level of my LACK skyscraper (3D printer home). Category: Household
I found myself with way too many MicroSD cards, and while mkuiper's screw-close container was great there just wasnt enough space in there. This fits between the top and bottom of his case, adding additional levels that hold the same…
This is a simple stacker for Tassimo capsules. You can expand it by placing copies with a distance of 72mm from each other in PrusaSlicer (see pictures). Put some rubber feet underneath if necessary.
According to the assembly manual, there is a piece that you can use to secure an IKEA TJUSIG shoe rack on top of another one. But if your life is even slightly comparable to mine, by the time you have the Idea to do this, that piece…
This part allows you to stack wide mouthed mason jars. It was designed specifically for the Ball mason jars so I'm not sure if it works with other brands. The part is split into a top and bottom half, which need to be glued together after…
A enamel plate stacker and enamel dish stacker that when combined will still be short enough to fit into the over-sink locker of an Eriba Troll. This has been designed for a 205mm diameter plate, and 160mm diameter dish, of depth 62mm.
You can store A4 & A5 and some smaller types of paper in there. They are connected to each other by a nut and bolt.
This is a connecting ring to allow the US General and Kobalt mini toolboxes to be stacked. The lid can be opened, add the connector, stack another toolbox on top. UPDATE: I added a version 2.0 for those that want to modify their toolboxes…
I made this remix because I needed it to fit inside a very tight HP Compaq case with limited space. This is a remix of
Uses standard #6-32 UNC PC screws (four at the bottom of the top drive and up to six on the sides of the bottom one. Inspired by version made for 2.5in drives: https://www.printables.com/model/269975-ssd-stackers-25-hdds-work-too
Stacker for 25 standart size tea bags.
I had trouble printing the upper (stacking) wings so I added some support in the model for a cleaner print from the first layer up.
a connectable piece that stop your cans from rolling
Modified the plain lid to include the Doom Slayer emblem.
Over the last year, I've collected a few of the US General minitoolboxes to hold some of my 3D printer accessories and some hand tools. I looked online at some of the different options to stack two or more on top of each other, and didn't…
Inspired by the way the Prusa Lack Enclosure aligns the top of the enclosure to the base table, I created a similar setup so that I could securely stack a third lack below my enclosure without screwing it together. Simply screw four top…
Here is a small thing to secure a second lack table from ikea, when you want to put them on top of each other. To install, you just have to unscrew the leg a bit, slide the thing in between leg and table an then rescrew the leg onto the…
Inspired by https://www.thingiverse.com/thing:2093628 Video about the drawers and rack here: https://youtu.be/CizFwbOmd7U i wanted to find a colourful way to use all my leftover filament and also the mountain of sample filaments i have.…
Making the assumption that there will have some amount of weight on it, I've made a very short version of salzig's LACK table stacker model, thickened the walls a bit, resized the leg "receiver" hole a bit and beveled the edge to account…
This is a small tray insert for the Stackers jewellery box Classic Trinket layer, for holding stud earrings. Each tray fits exactly into one of the compartments and can hold 4 large pairs of stud earrings or more if the earrings are…
As my pots of Revell paint were being stored in cardboard boxes, I took the time to create an organiser. Lightweight and printed with little material. Available in 3 sizes for 25, 20 and 15 pots. Stackable, combinable. Printed without…
1st, do not put these on before assembling the table! Has holes for screws, but the fit was tight enough not to need it. Debating to increase the tolerance value and release a ‘loose fit’ version. WIll if anyone asks. There are a lot of…
Spacers for budget friendly brand of terrarium enclosures.
Designed this piece to latch onto 2 Ryobi 18V Batteries for transporting and storage. I printed it with 2 walls at 10% but I’d recommend 15 or 20% for better durability. It can be printed without supports if you don't mind the little bit…
This is designed to be used with plastic hangers to cascade several hangers together. Printed on side using PLA filament – no support necessary.
I have a tri-stack of Intel Skull Canyon NUCs, running ESXI 6.7. The ability to stack them on top of one another with a little more clearance than I was getting became a necessity. If pink isn't your thing, print them in red, blue, or…
This is a simple 2-level car lift/stacker made for LEGO Speed Champions. It lets you park/display two cars in the space of one, perfect for shelves or a garage display. I printed mine in PETG for extra strength and durability. The model…
These Gu dessert pots are delicious, and the glass ramekins they come in are too good to throw away. If you're like me, you've got a unrespectable amount of them in a cupboard somewhere. Have you ever tried stacking them? Nightmare. Time…
These notched blocks can be stacked up across each other to build complex rectangular structures. Great fun for kids. All of the blocks are rectangular in section with 45° chamfers so they can print in FDM without support. The standard…
This is a sturdy and robust shoe stacker. It holds one shoe above the other. There is plenty of room for even large shoes. The ones in the image are size UK 10 or EU 44/44.5. & 45 - men UK 8/8.5 or EU 42/43 - women So all the shoes are…
I have five external hard drives of differing shapes and since they didn't stack properly, I created this stacker. Included is the original 1 piece stl, although when I printed the one you see in the pictures, I did use Prusa Slicer to…
This model stacks and you can see each color top down and from the side.
Dual PSU Stacker Brackets for Meanwell LRS-200 Supplies, Designed for the underside of my Voron for a 24 & 48V System Please note: due to spacing, the lower panel will most likely no longer fit
This container holds 6 Blender Bottle lids stacked on top of each other reducing the amount of horizontal space your Blender Bottles use in your cabinet or pantry.
150 mm lenght stacker for standart (radius cca. 56 mm) makeup remover cotton pads
The maximum size of bottles are about 500ml, it's possible to store about 700ml bottle only on the top stair. 最大ボトルサイズは500ml程度ですが、最上段のみ700ml前後のボトルも収納できました。 BOM D6x2mm cylindrical magnet x4 Assembling Print a model. Insert magnets into all…
Remixed to be compatible with Hatchbox filament boxes. Adjusted the thick side to the correct dimension Added some thickness to the thin side because it sits a few mm lower than the thick side. Print Settings Resolution: 0.3 Infill: 0%…
Hi all, Made this design to display my silver coins that are in a protective case. Mainly just to keep it a bit nicer then in a plastic box. Just to put it in a the safe like this and be organized.
