Calf Stretching Wedge
Angle 25°, 75 massage points, non-slip surface, easy grip, tread surface 250x290mm. material PLA, PETG no supports
- Downloads
- 202
- Likes
- 43
- Rating
- 5
309 models
Angle 25°, 75 massage points, non-slip surface, easy grip, tread surface 250x290mm. material PLA, PETG no supports
Stretching Cat model with demonstration gcode for proper support. Remix of content prompted by @Senk_3022469 .
A remix of the stretching-cat watch stand for a Galaxy watch. The original didn't want to stay standing up because the cord would pull it to one side or the other, so I added a baseplate to keep it stable. I made a channel on the…
Allow the print to cool completely before removing it from the print bed. Remove from the print bed very carefully. If you need a different size, please adjust the size of the model according to your own needs.
Jednoduchy držiak malej stretch baliacej folie do jednej ruky. Pri balení si môžeš brzdiť odvijanie palcom ruky aby bola folia pevne napnutá. Pri vkladaní rolky stlač spolu k sebe rozdelený koniec držiaka a nasaď rolku. Tak isto aj pri…
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 15hours with recommended settings and 0.6mm nozzle. Slicer settings: 0.32mm layer height, 5-6 perimeters Post processing instructions: Print 3 pcs…
This is a remix of Cat Stretch by billyd. I used Meshmixer to reduce the mesh and create a voronoi pattern. I scaled it to 125% and printed it like that. If you would like to donate, please do it to the author of the original model as he…
Stretchy Springy Ghost Toys STL files included for three ghosts: (1)Big Ghost (2)Medium Ghost (3)Baby Ghost Dimensions of Big Ghost: 3 in. x 2.5 in. Dimensions of Medium Ghost: 2.5 in. x 1.5 in. Dimensions of Baby Ghost: 1.5 in.x 1.25in.…
This fully print-in-place fidget boasts a variety of shapes for a satisfying squish and squeeze experience. You can choose between a circle, a triangle and a square. Print Settings: Make sure you have a lot of bed adhesion because the…
This is a scan of a small cat statue in a stretch pose. The statue was constantly being knocked off the window sill by our real cat who apparently didn't like the competition. The statue had some damage, so I repaired what I could and…
Simon's cat figure, scratch version and stretch version. Can be use as fridge magnet by glueing a magnet to the back. I'm a big fan of the Simon's Cat Cartoon. If you don't know what it is, check it out: https://simonscat.com/ Thank you…
The Voronoi Stretching Cat is a beautiful 3D model perfect for pet enthusiasts and those who appreciate contemporary art. The design employs a Voronoi pattern, which creates a mesh-like structure that is not only aesthetically pleasing…
This model is suitable for a Prusa Mini, and prints easily with no supports and (almost) no infill. Printing details are at the end of this description but first: SIZE Two models are attached in Small Size (EU size 54 and up), and Large…
Fidget Stretchy Flexi Squeeze Thingi I had no clue what to put into the searchbar for this toy. So I made it myself. The slats are very thin and short, so you may need a few tries. You may need to adjust the temperetures of the headbed,…
Stretchy, Springy Pumpkin Toys STL files included for two pumpkins: (1) Big Pumpkin (2) Small Pumpkin 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great No Supports needed. 15-20% Infill Dimensions of Big Pumpkin: 3.25 in. x 3 in…
This design is based on a size 10 UK shoe size but can be used for smaller.
Baseball Caps Insert| Hat Shaper |Cap Liner| Ball Caps Form| Hat Stretcher I used 10% infill PETG Once done printing take the print off the build plate and start molding to the inside of your hat. The build plate is still hot so be careful.
Stretching cat phone stand, designed to hold a large phone the gap is 14 mm. Printed with supports, but I think if you drop the model 1mm under the build plate it would be possible to print without. I used a model from Cults3D ( Free STL…
Cat Ring Holder I made this for my girlfriend and I think there are many other girlfriends of 3d printing nerds like me that would enjoy it :") It can hold many things: Rings, necklaces, watches, glasses (if scaled up big enough). The…
This is the second in a series of four spiral ornament designs. With my settings, it weighs just 7g. This season, I plan to publish one Christmas ornament a day. Follow me to stay up to keep up to date. I originally printed my stretch…
Compatibility: GalaxyWatch_2-3-4_CatStand_V1 (33.66mm charger puck): Galaxy Watch 2 (not tested) Galaxy Watch 3 (not tested) Galaxy Watch 4 GalaxyWatch_5-6-7-8_CatStand_V1 (29.33mm charger puck): Galaxy Watch 5 Galaxy Watch 5 Pro Galaxy…
Stretchy, Springy Candy Corn I included 2 STL files of this Candy Corn. One file has “more spacing” between the layers so they are easier to separate. But I also included a file with “less spacing” which is a little more work to separate.…
Designed after I 3D scanned a wooden cat model. Made in ABS. How I Designed This Step 1 Obtain materials Obtain wooden cat model Retrieve Projector Get noise pattern picture Procure camera Download VisualSFM Download Meshlab Download…
Stretchy, Springy Snowman Included are 4 files: Large Stretchy, Springy Snowman Small Stretchy, Springy Snowman Hat_Large Snowman Hat_Small Snowman 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great No Supports needed. 15-20% Infill…
A remix to add stands and stability to use this awesome design as bookends!
Remixed the original file into a low poly version. No supports needed, but printed with a brim to help support rear legs.
Stretcher bars for embroidery/needlepoint canvas. Use tacks to pin the canvas around the frame like you would with wooden stretcher bars. Use four bars to make a complete frame. Features Stretcher bars from 4" to 10" (in 1" increments)…
Nemesis Retaliation board game insert/organizer using the core box and the sangrevore expansion box. The sangrevore box holds all the enemy miniatures. The core box holds everything else. The insert supports the following: core box…
This is a remix of one of my own designs, Cat stretch. I reduced the cat mesh to a lower poly count, and then copy rotated them into 3 positions forming a circle, and then rested a nice sized (almost 8" in diameter) dish balanced between…
This was modeled after a real side handle. I've included some small supports in the main body. PETG or ABS is recommended. I printed them at 0.2 layer height and oriented them as seen in the last picture.
Single piece haunted mansion gargoyle. Note that the model is front heavy and needs to be secured by glue or other means to attached surface. Also included single piece base with drywall screw keyhole and single piece base with no…
Created for a crazy cat lady in my life, this holds a 70cl bottle of wine in a stylish way. Printed on an Elegoo N4Pro at 0.2mm, 3 walls, 10% gyroid. Added manual tree supports on the cat's undercarriage for safety but would probably be…
Stretchy Hexagon Fidget – FREE TO SELL!! This is a super stretchy hexagon fidget that’s crazy satisfying to pull, twist, and flex. It’s designed to print strong while still being flexible, giving you that perfect bendy, fidgety feel. Even…
Scale záchranářské nosítko 1/10 podle předlohy reálného nosítka. Rozměry 218x62x3
Based on native wood carvings. Check out all my animals! Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This model was inspired by the “single extruder -dual color” contest and Rossero. The original model was a scan by blu3lit3 on thingiverse. I remixed that to make the tail better. And then this remix is for the contest. The stretching…
I bought a kit (yes, that kit found also on Amazon) containing plenty of ear stretchers but when I reached size 6mm I noticed that the next piece was 8mm. I created a 7mm and a 9mm stretcher. You can use the o-rings from the kit. The…
Recommend printing on side, with brim enabled, but no need for support structure. Feel free to scale it down a bit if you want.
Растяжитель для широких ботинок. @Напильники для двух размеров обуви: клиновой и соединительный. @Я использовал широкую шайбу 8 и винт с потайной головкой DIN 7991 М8х100. @И два винта М4х30 . @Есть напильник под болт М8х90 с шестигранной…
Saw the Voronoi Cat model and thought it was well done. Saw where someone else made bookends out of it but did not include the extension that lies underneath the books. I changed the bookend base to include the extension and raised the…
3D PRINTING SETTINGS: PLA works best. Layer height 0.2 mm 15 % filling No supports required The slicer shows a lot of warnings, please ignore that. The program detects the distance between the individual layers. This "space" is wanted and…
Because the commercially available tools for this job (meassuring bolt stretch while torquing bolts during assembly of an engine) are quite expensive and we already had a micrometer gauge at hand - i decided to go ahead and just print…
I was really interested in the Calfpro and the positive reviews it’s received. However, at over £100, it’s more than I’m willing to spend. So, after spending a couple of hours in Fusion360 and using the information I found online, I’ve…
This model is easy to print and requires small supports on base. The articulations are designed to come out clean even on basic printers, making it great for both beginners and experienced makers. Video :…
Hat Stretcher worked great, but having the layers the same direction as the threads could case layer separation if screwed too tight. Merged the screws into one model and made it so can be printed horizontally. Worked well for me. This is…
Here is a cute articulated stretching cat! The spiral body design makes it flexible and super satisfying to play with as a desk fidget toy. ⚠ Printing Tips (Important!) Supports: YES, REQUIRED. Due to the overhangs on the chin and belly,…
If you are using this fan duct for a volcano nozzle on your ender 3 s1/s1 pro, I highly recommend using this longer remix of the ‘ X45 Sprite CR Touch Probe Zero Y-Offset Mount v1.1 (Ender-3 S1 Pro and similar)’, which simply has its two…
Meet your new favorite desk buddy! 🐱📱 This adorable, stretching cat phone stand is the perfect blend of cute decor and practical functionality. Designed to hold your smartphone securely in both portrait and landscape modes, making it…
As always I will promote and REWARD the first person to post a quality make (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully decent looking print of at least 80% scale. I would like to see…
The original didn't allow for wiring to make it a true sconce. This has been added and the model has been laid out for proper printing. A new shelf is also made to hide the wires and a 5v power converter. The candles are nothing more than…
Angle degree torque gauge for 1/2 inch spanner extension usually used to tighten cylinder head stretching bolts. It's a snug fit onto the ½ extension and the dial is sandwiched between the bottom ring pressed onto the upper hand piece. To…
The original broke - let's reproduce! The original has no possibility to insert the (2 tied) strech bands so I added a slot. It's very tight but when you stretch the bands while pressing it through the slot it goes through pretty well.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Stretchy Snake - hours of stretchy, fidget fun! Stretchy Elastic Craft Cord and painter’s tape needed. Stretchy Elastic Craft Cord available at Hobby Lobby, Michaels, Amazon, Walmart, etc. 3D PRINTING SETTINGS Layer Height 0.2mm PLA works…
It's based off of the String Strecha, utilises leverage to stretch in new strings on any instrument. Showing it here with some Polyurethane U-Bass strings, which are the worst when it comes to needing to settle in. I am a luthier so any…
WW1 British medical stretcher crew carrying a wounded soldier. Scale to toy soldier size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a…
This model is compatible with the lego system.
Hat stretcher, with compliant mechanisms designed to bend outwards to put a more even force on the rim. I printed in ABS but should work in PLA
Check out my newly designed add on, which adds 9 additional degrees to the wedge! :) Design & Features 18-Degree Angle Two-Part Assembly : Designed to be printed in two pieces and easily snapped together without glue, ensuring…
A cat stretching its body, with a polygonal and elegant appearance.
My wife wanted a calf stretching wedge, so this is a basic wedge to do just that. Nothing complicated, takes a lot of filament, but its unique and kind of cool geometric cutouts make it stand out. Shouldn't need supports. Any filament…
Used Polycam to scan a statue of a Cat stretching with a bird perched on it's tail. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam…
Vertical 200mm Quad Frame. Using PTEG frame Weighs 73 grams not including Hardware. Uses 5" props and 2000 series Motors. Print 2 Side Frames, do not mirror, Bolt together with 2- 3mm x .5 x 35mm Socket Screw with 3mm and 4- 3mm x .5 x…
print every file once. Find the longer side of the corner. Take one of the long sides, and attach to the longer part of the corner. Repeat the steps. take the short side to attach the rest. I have updated this model, to make it easier for…
I adjusted the case for the Hollow Clock 4 to have a larger compartment– the area with the gears is untouched– I only stretched the compartment area for the boards & wires to fit a little easier.
"And consider this dismaying observation: This chamber has no windows and no doors, which offers you this chilling challenge: to find a way out!" Inspired by the classic Disney attraction The Haunted Mansion, this heating grate mimics the…
A remix of another shoe stretcher to fit a smaller turnbuckle with less slack.
Design Concept The "Stretching Cat" captures the elegance and grace of a feline in a serene stretch. The design emphasizes sleek lines and smooth surfaces inspired by minimalistic art, offering both aesthetic charm and a sense of…
This lowpoly stretching cat model was designed with AI, paying attention to the smallest details to ensure it can be printed with minimal supports. 🔹 Recommended supports : On the bridge of the tail at the top. Under the chin. You can…
Board game organizer for Conan (monolith) and the following sets and expansions. Also supports sleeved cards, I use mayday premiums (thicker ones). Kings Pledge Stretch goals/ Collectors Box Stygia Nordheim Khitai Conqueror & Tome of…
This is my attempt to make a WW1-inspired French stretcher crew with a medic in the field. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a…
The popular 3D printing test model deformed to its utmost absurdity. The new 3D print torture test gang is calling themselves "The Strenchies" which have wreak havoc amongst the benchy population and are now coming to infiltrate your…
Ring fits more sizes. Scale it up or down to your size. Printed with a brim.sizes, but standard print is size 18mm. Print it with PETG so it's not so brittle. Photo shows it when it came of the buildplate. (Brim stayed on the buildplate)
UPDATE 30.01.2025: 1-Simplified Chassis 2-External storage box 3-Enhanced body det Everything needed to build the trailer is included except clear parts. Use any clear material of your choice to replicate the windows. A matching trailer…
It is a lifesaver for stretch foils Category: Hand Tools
Brim: Off Supports: On Infill: 10-20%
A stretching cat. Print size 100% is 51mm/2 in. Can be scaled down at least 50% Perfect for showing off filament colors and gradients Printed on Bambu P1S with Just Maker matte filament Supports: No Infill: recommend at least 10% *Note,…
Use these plugs in your shoe stretcher to help areas that are tight in your shoes. Print with the plug facing up and use brim. Happy Printing!
a simple standard size stretcher key for canvas Printed on anycubic kobra plus 0.6 mm nozle 0.5 mm layer height 80mm/sec wood PLA at 195 degrees
Printed in https://shop.3dfilaprint.com/filaprint-glow-in-the-dark-green-premium-pla-175mm-3d-printer-filament-8112-p.asp On my Flashforge Adventure 4 I can only recommend 3D Printed stretchers as a one time use as it cant be guaranteed…
Printed in PLA Used 0.4mm nozzle with 0.24mm layer height with standard support.
A Stretching Cat with tail up in the air, easy to print, no supports required.
Stretch Wrap Dispenser for Film Rolls of 1.5” Core Size. Cheap dispensers give no tension to the foil, or the whole foil falls of the dispenser. That is why I made that handle with the adjustable tension. Tension screw is even locked so…
Print in Place Rooling mehanizm Print with Z=0,3
Roller for stretching plastic foil - small roll. +- 100mm but i add also files where model is cut to 3 pcs you middle part you can scale and in prusa slicer unite together. Please do not forget the part where the threads are add more…
Posture Corrector Yoga Cross Stick - Muscle Release Tool - Yoga Sticks - Stretching Tool - Giunzione Barre correttore Posturale Yoga Sticks Technical Specifications: Default Stick Diameter: 21mm Customizable: Easily resize/scale the 3D…