170 models
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
Printing instructions Deathstroke comes in two pieces: a main bust part, and a base part, to be printed separately. FDM This one is an easy one on FDM printers. No supports required for either part! Resin As usual this one comes…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. The boxer configuration with two…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
General A Overhead Camshaft engine is an internal combustion engine with the camshaft placed in the cylinder head. This single cylinder model has four valves, with an engine capacity of 30 cc. This model was designed in Tinkercad.…
V 1.1 28. Feb. 2024: The katana has been extracted into a new set to meet the new license requirements V1.0, 26. Jan. 2024: first release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is…
I have just added a new STL file called washer, this can be placed between the engine case and the handle to remove excess play. All parts are pre oriented and print with no support material. Very nice drawing to see how 2 stroke engine…
Straight twist lock oil funnel. Originally designed for 6.7 powerstroke in a Super Duty. Probably will work with other ford engines. Printed in PETG. 3 layer wall thickness 30% infill
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. A matching 2 speed gearbox you can…
So many people have suggested these masks would be great for Paint ball and or airsoft ; ) I quite agree, so what better than one with a little attitude. Another evening of trialling modeling free hand, which I'm starting to really enjoy…
This is a replacement cap for a super stroke grip for a golf putter. Also included is a version of the cap which can be printed in TPU and used with a Garmin CT10 club sensor. Normally this sensor simply screws into the end of the club…
2023-06-16: Updated with stl and step for Mini SB released with v0.2r1 on June 10th. Accent parts are now 0.2mm thick instead of 0.4mm. Less hassle with one layer accents when using the 2 virtual tool head method. Remix of the great work…
Another awesome model from Pepakura.com Unfortunately there was no reference to the original modeller, so no credit available. Please note the sizing will need to be checked to suit your needs and since I have upgraded to a Crealty CR-10…
DeathStroke Inspired Helmet Enjoy Category: 3D Printing
cover for intake ports when working on engine
Updated the original faceplate for multicolor print and added a stroke around the edges. Also removed the fillet from the hexagon corners. Made to match this Mini SB…
This simple little golf stroke counter has helped my score keeping this past season. Originally designed for multi-color printing, you can also print the dial and the body without the numbers and logo and fill in the depressions with…
Fortnite DeathStroke Inspired Sword Enjoy I don't mind if you make and sell my models that's fine, But this can Not be tolerated. If you have a etsy account please leave some negative feedback on this guy.…
Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…
Use either the separate stls or the multibody to print the parts in different colors. The accents are 0.45mm thick so they should be at least two layers thick.
We have made a four-stroke engine for you. It is suitable as a learning tool for all students. To assemble it you will only need small screws to connect the piston to the crank. Print with the support.…
DeathStroke Arkham Knight Inspired Helmet Enjoy Category: 3D Printing
stroke coach holder for NK stroke and speed coaches, you just need to put it in double side tape and put on a boat, you can see original here. Took quite a few tries to get it right.
The parts should to be printed on a smooth build plate, not textured. If possible, avoid elephant foot. I printed the model on a PRUSA MINI, with PLA+ filament, layer height 0.15 mm. I use Hard Plastic Glue. For assembled and exploded…
Two versions of short stroke spacers for airsoft GBB like Hi Capa, one open one closed, both 5mm tall, change your Z size as you need. Recommended: 2mm, 3mm, 5mm. The open version works better with PETG, it flexes more so it can go in and…
DeathStroke Black Ops inspired Helmet Enjoy Category: 3D Printing
Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…
Deathstroke mask. You can scale the mask to fit your head. The file contains two parts for easier assembly.
DeathStroke Rebirth Inspired Helmet Enjoy Category: 3D Printing
I wanted to make my Knomi look a little more Dapper so I remixed it using the technique @Panzarkatten used for his SB Shroud. I printed in PrusaSlicer Set up 2 extruders Change tool change GCode to filament change Import 3MF Orient Set…
Test model of a yamaha yz125
Make your own table-top model of a four stroke, single cylinder, OHV (over head valve) engine. This model features a functioning crankshaft, piston, camshaft, and a pushrod-rocker valve system. Rough Dimensions: 172mm x 122mm and 273mm…
Threads are roughly M32x3.5
Naruto to Boruto Paper Bomb / Brush Stroke Picture Good candidate for Color Change at Z height. Easy 2 tone. UV Map Enhanced with Stable Diffusion img2img - used as (Displacement) Modifier.
A proof of concept for the 2024 Porsche 6 stroke internal combustion engine patent. Showcases the 6 stroke functionality with a single cylinder cutaway view. Standard Lego axle compatible (used to mate the assembly).
DeathStroke Legendary V2 Inspired Helmet Added more detail and a tab for the back. Enjoy Category: 3D Printing
Učební pomůcka do hodin fyziky. Model je poháněn motorkem z auta z autodráhy o tvaru zploštělého válce. Průměr motoru 21mm a přes zploštělou část 16mm. Model je poháněn 9V baterií a výkon regulován regulátorem. A teaching aid for physics…
Non-printed parts needed are bearings, shaft, valve, timing cam and belt, switch, ignition circuit etc. All parts are metric, but if you can find a close fitting imperial parts they should work too. Modular design allows for 1, 2, 4…
For sizing I recommend using my FREE Heads for Sizing here ----- https://www.thingiverse.com/thing:4885210 Enjoy Category: 3D Printing
English/Английский Hi!! This is a model of a 4-stroke internal combustion engine. The model is designed to study the operation of the engine. This model can also be used as a mechanical anti-stress. !!! For correct functionality, it is…
DeathStroke Inspired Weapon Pack Enjoy Staff uses a 13mm dowel rod Category: 3D Printing
Replacement knob for the fuel selector on many 2-Stroke Seadoo models. There are 2 models, one is a shorter version without the need for supports and a longer version modeled closer to factory. Both work fine, just personal preference.…
DeathStroke Animated helmet Enjoy Category: 3D Printing
Feel free to check out my website https://www.ar3dprints.com/ http://www.prusa3d.com/#a_aid=3090
impression of DC mercenary deathstroke. The items: sword, pistol and knife are character complement items.
Four Stroke Cylinder Head Organizer
The pictures are of my make of this model. I was very pleased with it. The “edit” file was one I made so I could print the blade as smaller pieces. I did my best to seamlessly melt the separate pieces together to look as one blade.
Just a simple key stroker. You dont know you need one until you do... :D It uses a mini servo, a small potentiometer (optional), and any arduino compatible board that can fit inside the box and can handle the servo. I used a cheap Wemos…
7.3 Powerstroke Oil Funnel System (OBS) This is a modular oil funnel system designed specifically for the 7.3L Powerstroke , with a focus on the taller oil fill neck used on OBS (1994.5–1997) trucks . More models for obs fords and…
DeathStroke New 52 inspired Helmet Enjoy Category: 3D Printing
DeathStroke Teen Titans Inspired Helmet Enjoy Category: 3D Printing
I was too unsure with a printed chain when I designed this, so I went with gears. The model in the pictures is still with metal screws, but i updated the files so all of you can have fun with this model and are not meant to search for…
I recommend using stronger materials like ASA or ABS 100% infill and support enabled
Arrow Mask Death Stroke, Cheers Jace
Designed my trucks 6.7L power stroke badge due to disappearing on the passenger side. Came looking for any 3D model to see if anyone have done it but no one had, So I took it upon myself to try to create one in Solid Works. "Turbo diesel"…
0.4 Inch 0.4" Stroke version. Here is the product on Amazon: https://www.amazon.com/gp/product/B09YQYRHB9
Whether you are installing this as a buffer to extend your AAP-01's lifetime or as a short-stroke kit , the installation process is the same. You can follow any YouTube tutorial for an AAP-01 short-stroke kit installation; the only…
The Worker Seagull Trigger Short Stroke + Safety Delete is a drop-in mod part for the Worker Seagull that reduces the pre-travel of the trigger before it engages with the catch. This allows for a snappier, more responsive trigger feel.…
This is a sectional building called Stroker's that I designed in tinkercad. You will print in parts and assemble with Plastruct Plastic Weld. It features a recessed main entrance along with a side entrance door for access to the second…
This is the roof, second floor, side walls and necessary brackets to mount all of those items to the assembled front wall. The side walls are taller then the front wall. That is because the assembly is designed to mount at the edge of the…
This labeled kinematic engine model helps visualize piston movement during a 2-stroke engine cycle. Turning the knob at where the conrod attaches to the crankshaft moves the piston from BDC to TDC. Parts of the 2-stroke engine are…
This is a sectional building called Stroker's that I designed in tinkercad. I will print in parts and assemble with Plastruct Plastic Weld. It features a recessed main entrance along with a side entrance door for access to the second…
THIS PROJECT IS WORK IN PROGRESS; PARTS MAY CHANGE AT ANY TIME! This is a modular Airbox Design which has mainly been designed for use with Moped Two-Stroke Engines. Common brands are Sachs, Ciao or Puch. The modularity allows combining…
Create your own golf stroke counter! Follow These Instructions: https://www.printables.com/model/703299-bead-counter-geometric-shapes
Improved Arccos SuperStroke Putter Accessory - 3D Model Files Included This is a refined version of the Arccos SuperStroke Putter Accessory. The official accessory costs $20… no thank you. Included are: - Fusion 360 (.f3d) file for full…
For training your pool stroke. Modelled by request. *Not yet tested
This is a sectional building called Stroker's that I designed in tinkercad. I will print in parts and assemble with Plastruct Plastic Weld. It features a recessed main entrance along with a side entrance door for access to the second…
Deathstroke mask Print instructions Deathstroke mask
Model is of protecting Mey Interceptor Crossbow from dry fire. Emulates 2 arrows, so magazine capacity is reduced to about 16 maybe 16,1 if you squeeze. This model catches the string at beginning of stroke, so less force is exerted on…
Deathstroke inspired Faceshell Enjoy Category: 3D Printing
This is a sectional building called Stroker's that I designed in tinkercad. I will print in parts and assemble with Plastruct Plastic Weld. It features a recessed main entrance along with a side entrance door for access to the second…
Simple model to hold a dial indicator for measuring piston protrusion. You mount it to the cylinder with a head bolt slightly snug and use it to measure the piston height above or below cylinder top surface.
After removing existing grips, unscrew bolt in bar end, remove washer from bolt and reinstall through bar extender and install new grips per manufacturer. Can be cut to length in slicer as needed, 30mm extension in the file. Printed with…
This is a sectional building called Stroker's that I designed in tinkercad. I will print in parts and assemble with Plastruct Plastic Weld. It features a recessed main entrance along with a side entrance door for access to the second…
These are 4 90' long brackets for adding the side walls to the front wall assembly of Stroker's Attach with Plastruct Plastic Weld Printed in PLA+
3d printed parts for stroke coach holder that you can put on wing, best to use some material that is flexible like PLA or PETG not ABS or ASA.
A Blast Golf Sensor Mount for a Super Stroke Putter Grip with the Counter Weight Option
Pull-start handle for 2-stroke 47cc/49cc engine. Use M3 nuts and bolts to assemble it. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.3mm Infill: 50% Filament: gembird PLA+ black Notes: For…
printed in abs and has been holding up well try and keep hardware from old one. mine broke i leant on it
In this electrifying digital artwork, a right-handed cricket maestro takes center stage at long-off, ready to unleash a mesmerizing pool shot. With every muscle poised and the bat held high, he exudes power and finesse, promising a…
This is a sectional building called Stroker's that I designed in tinkercad. I will print in parts and assemble with Plastruct Plastic Weld. It features a recessed main entrance along with a side entrance door for access to the second…
If you have a problem with the building, write to me I printed everything with a 0.4 mm nozzle and a 0.2 mm layer height. The screws don't necessarily have threaded quality; they are simply pressed into the holes due to their dimensions,…
deathstroke-mask-with-two-eyes
Pool Stroke Trainer as requested by a Reddit user.
Get rid of those thoughts: Is there already two-stroke oil in it? What type of gasoline is in the canister? Just put the label on each canister and screw the bolts into the right holes to indicate the current content. No slider that slips…
Edit: Did it wrong. Corrected now! Thanks to GuMieth for pointing that out! Now 2 Types! Beaker for measuring 1:50 two-stroke oil for 5L (roughly 5 quarts) of gas/petrol. Messbecher zum Abmessen von 1:50 Zweitaktöl für 5L Benzin.
I made a file that HAS A 4 STROKE engine mode in it it is a 13-hour ender print enjoy 50% infill use all supports best temp is 210 c and bed 60 c Category: Models
Printing: The logo and Hex design are technically 7 different objects and should be separated out under the Objects in your slicer of choice. Logo/Hex pattern is 1 0.2mm layer deep. Model is already oriented in the .stl.
REV UP for My lastest Engine model, The Single Cylinder 2 Stroke Piston Engine. This model serves as both a learning/educational model, and a design for enthuisists. You can choose between a fidget crank case, or a descriptive model with…
ML-120K — lightweight two-stroke gasoline aircraft carbureted engine (12 hp), manufactured by JSC “Motornaya Lavka”. Applications: • entry-level ultralight aircraft • small fixed-wing UAVs • motorgliders and experimental aircraft •…
The Worker Kunlun Trigger Short Stroke + Safety Delete is a drop-in part for the Kunlun Bolt-Action Blaster that reduces the pre-travel of the trigger before it engages with the catch. This allows for a snappier, more responsive trigger…
