519 models
! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…
! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…
Test the maximum printing speed of your extrusion system! The model can be scaled in X and Y to fit your buildplate. There is a small notch every 2 mm to indicate a speed change. GUIDE Load, orient and scale the part to your liking Enable…
These two connected tensegrity structures pull on each other. You can give them different hights and angles. Start with the tension of the two lateral threads (1 and 2), then the central thread (3) and finish with the external (4). Longer…
Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…
A set of detailed stone pieces designed to support my Water Wheel model , and to be an easy addition to any tabletop terrain project! This is an easy set of pieces to print and put together, and it has enough detail for a simple…
MK4 / Mk3.9 Upgrade parts but laid out on MK4 with Input Slicing 0.4mm nozzle PETG. Prints 40% faster at the same quality. Original MK3 version takes 2,384 minutes (39.7 print hours) per set. This version takes only 1,434 minutes (23.9…
A simple to print iceberg crystal. Great for dioramas and DnD games or for testing your printer. Prefered print method is vase mode. I used PLA filamment. Happy printing!
PLA Temperature Tower for Prusa Core One / Core One + This is a pre-sliced temperature tower designed EXCLUSIVELY for the Prusa Core One and Prusa Core One + printers. It uses the "0.20mm Balanced / Speed / Structural" print profile as a…
Structure of the Earth I present you an educational 3D model of planet Earth, showcasing its fascinating internal structure. This model is designed to provide a unique view into the Earth's interior, allowing for a detailed study of its…
Die "Bienenwabenstruktur" wurde in der Höhe von ca. 2-3mm reduziert, was eine gewisse Biegsamkeit bringt. Überdies kann es dann als Grill, Zaun, Untersatz usw. verwendet werden. Kann bei Bedarf weiter dünner gemacht werden Bezüglich…
New version V2 (Reduces filament usage and printing time in half. It also works with 4 sticks instead of 3, making it more resistant.): https://www.printables.com/model/577962-plant-climber-structure-for-tomatoes-beans-and-cli In Spain,…
Work steps Parts printing Connector 1 you need seven and connector 2 once. Assemble parts. Best on a suitable table. Needs some space. Insert cable. Leave some overhang so that you can shorten it when the LED strip is inserted. Fill the…
Scaled from real structure found on the internet to 1:220 (single fan cooling tower). Added some pipes and side stairs from photos on the internet. The provided gcode is added for print time estimation. It printed very good apart from the…
I wanted to use this holder mounted to the wall of a cubicle overhead storage bin. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 80 in C-clamp area, 15 elsewhere. 80% for screw. Supports: Yes, for threaded hole…
Work steps Parts printing Connector 1 you need seven and connector 2 once. Assemble parts. Best on a suitable table. Needs some space. Insert cable. Leave some overhang so that you can shorten it when the LED strip is inserted. Fill the…
I printed with tree supports and 0.2mm layer height. Results will be much better in resin! Your results will also be much better if you don't print it with white PLA that has been sitting out for over a year!
Work steps Parts printing Connector 1 you need seven and connector 2 once. Assemble parts. Best on a suitable table. Needs some space. Insert cable. Leave some overhang so that you can shorten it when the LED strip is inserted. Fill the…
https://www.rcsb.org/structure/1aoi
After the launch of our Braille Scrabble, we were contacted by a chemistry teacher at a Polish school for the blind with a rather interesting idea. She noted that the Scrabble board offers great educational opportunities. After the…
3D model of the 4v60 x-ray file from PDB
Structural Connections of IPE 360 to HEB 200. Screws M20. Model scale 1:1, recommended to print 1:5.
EN: Long in my head, now finally realized. Holders for the honeycomb-structure-remix , or the grid and the holder . The hexagons are intentionally relatively precise so that the “buttons” adhere well to the honeycomb structure. This might…
3D model of the 1FNT x-ray file from PDB
2x2x2 unit cells of a diamond crystal structure with impurities Instructions Print with paint-on support for the two overhanging carbon atoms. Use a brim. Rest prints okay-ish without support, but needs some cleanup. Model is designed for…
Rather poorly implemented design by me but hopefully someone else can help make it better!
Přiložené 3D modely vytiskněte. Středovou tyč (modely C, D, E) slepte sekundovým lepidlem, přilepte z každé strany LED pásek a spájejte s napájecím konektorem. Středovou tyč s led páskem složte do spodní části tak aby napájecí konektor…
I created a key fob for my OER discrete math text, Applied Discrete Structures. The 3D text was created with an Oculus VR headset and the Gravity Sketch app. The logo was created with Mathematica.
Students will prepare joints for the purpose of teaching students in the subject of Technical Drawing. Studenti připraví spoje pro výuku žáků při přeměřování a rozkreslovní objektů Odborné kreslení.
Usually when printing objects they talk about walls and filling, but I made a structure without walls, without filling, and also without a bottom and a cover. There are only bridges that connect and lean on each other. The peculiarity of…
This is an updated version of my original minimalist Glasses Stand. I wanted a design that was complex and bold while still being a practical model that could be used every day. The gyriod structure is mesmerising to look at and is also…
Bistable Auxetic Structure Overview Structure expands to create dome and locks in place. Inspired by this video . The paper by Tian Chen and colleagues can be read here . Code linked here and available for download below. 3D Printing Info…
Lampshade with voronoi structure Compatible with Amazon pendant light kit Print information Size 180(X)x180(Y)x120(Z) Can be printed without support. Print in PLA with low print temperature and sufficient cooling to print the voronoi cell…
2020 / 3030 / 4040 T-Slot Framing Structural Brackets Ideal for use in 3D printers, CNC machines, laser cutters, enclosures, and other DIY frame structures. Suitable for: 2020 3030 4040 All our designs are free to download and use—because…
Size Dimensions (Length x Height) Width / Thickness Mounting Hole Diameter Large 22.0 cm x 22.0 cm 4.80 cm 0.6 cm (6 mm) Medium 17.6 cm x 17.6 cm 3.80 cm 0.5 cm (5 mm) Small 13.2 cm x 13.2 cm 2.88 cm 0.4 cm (4 mm)
Honeycomb structure as decoration or some sort of coaster or an underlay for lasering.
Satisfyingly slow flowing Marble Run to use with tree support only. Steel ball used: 8mm See Video for more details: https://www.youtube.com/watch?v=-zLj6\_tX5aY…
A little side project. These blocks are best painted dirty and rusty. Stack them high, point the pipes here and there. Mirror and scale. I have some thoughts to make more in this style, would you like me to?…
Have you noticed, that the printer is not working as expected? You can move the printhead without homing and it might crash somewhere. you can also move the base and its crashing if you reach the top. The reason is a not well programmed…
The Push-Lock Pins that you can buy from the store are made of Nylon, but I seem to be having success with PLA as it's what I have on hand. PETG may also be a good option. I've been printing with .2 layer height, 100% infill, automated…
Three of the most basic forms that crystal structures form in materials. Supports are necessary. Models in the image were printed at 50% scale. Print instructions 0.2mm layer height 15% infill Supports Necessary
9/5/25 Update: All changes are in bold italics. Includes instructions for simpler way to adjust the height of the file and a warning that the base file might not be the exact right height for your machine. Unfortunately, I unintentionally…
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
This is a robust Bookend (or Book Holder/Stop) designed to organize your shelves and keep your collection upright. Unlike decorative bookends that might snap under pressure, this model is engineered for utility and strength. It features a…
tow behind tractor with forage superstructure created according to the original behind tractors created by @MrHanjak, the corresponding scale of the model is 350%
Leviton supplies a shelf bracket kit that spans half the width of the media enclosure. This version provides a shelf with brackets to cover 2/3rd the width of the enclosure for wider objects. Printed with PETG, 0.4mm nozzle, 0.2mm layer…
Prototype of Auxetic metamaterial which I made to demonstrate how auxetic metamaterials work. The rectangle sample works well, but the star sample needs to be printed from flexible material. Auxetic material If you pull on the auxetic…
This model features a wireframe rhombic dodecahedron, designed in CAD and refined through an iterative process to form a Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring any…
vlek 9t s nástavbou na klády - For size to models of MrHanjak tractors use 350%
I designed these fasteners to help me connect my spare cardboard boxes and pieces together to make structures for both my kids and our bunnies! Each bracket features non-destructive teeth that help to grid the cardboard for extra grip.…
This is a PrusaSlicer project with the settings from CNC Kitchen. The Volumetric Flow starts at 7 mm³/s and goes up to 25 mm³/s in 1,5 mm³/s increments. Default settings are for the Prusa MK4. step by step to individually adjust the…
Shelf for use with Leviton SMC cabinets. Slots on top and sides should allow you to use either tie-wraps or velcro straps to secure the items/devices to the shelf. Print standing on its side using tree supports. Created from scratch using…
Very minor fix to "Viking Warrior by LSMiniatures" For No support 3D printing. I highly appreciates his great 3D modeling work!! TKS! Category: People
This is a remix of the stand for the jet engine of rndmframes_printing. It has the correct scaling and correct fittings for the engine-shape. The print takes rougly 3 hours. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
Tensegrity structure. https://youtu.be/Lo\_Qxrsz824 Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Resolution: 0.4x0.2mm Filament: Prusa PETG Galaxy Black Category: Physics & Astronomy
Aquarium (Fishtank) – Basalt Structures Hey maker! 👋 One of my older designs – basalt structures for large aquariums. Please forgive any small imperfections, I was just starting back then. 😄 Features: Hollow elements that can be glued…
The structural end detail contains a fuel tank, two radiators, flooring and various support columns. The parts list is for one end structure, two are required. Note: The FuelTankDecals and HazardDecals files can be printed on a vinyl…
This is the center structure details of the Apollo Crawler. Note that the two sides are not identical. One of the sides has a control room and the other side has radiator vents. Note that the Side 2 Skin is the same for Side 4 as well.…
vlek 9t s nástavbou na kulaté balíky s balíky. For size to models of MrHanjak tractors use 350%
This model consists of the Level 0-30 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete…
Only works: With DRY (!) TPU95 - only TPU 95! With the provided print settings In 90% of cases (not all TPU 95A filaments are the same) Print settings: Wall Generator: Arachne Layer height: 0.192mm (leads to 2.3mm total height, which is…
These accessories are tailored for an Ethernet switch resting on the shelf bracket I designed https://www.printables.com/model/302365-leviton-structured-media-extended-shelf-and-bracke The retainer holds the top of the switch in place.…
(Updated 2025 Version) English: This is a stylized 3D printable representation of the THC molecule (Δ9-Tetrahydrocannabinol), the active compound in cannabis. Designed as a framed wall art piece, it includes labeled atoms and a…
Create a structure for your climbing plants against a wall, a harness for your plant pot, or perhaps an art piece! Made for 4mm (5/32") wide rope 550 Paracord Connect the top and bottom part with two M3 screw 6 to 12mm long for each cross…
This model consists of the Levels 60-380 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a…
This model consists of the Level 30-60 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete…
This model was created because my advisor needed a teaching aid for undergraduate students in a Materials Science course. However, the 3D printer in our department often has problems and freezes mid-print when trying to print these…
Lattice cube generated with a truncated cubic pattern. Category: Engineering
This model consists of the mid-level structure for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of…
The excellent model from user "Kagarov" ( https://www.printables.com/model/41007-orbital-structural-printing-print-in-place-lamp ) now available for the proud owners of the PRUSA MINI !!! Its about 92% the size of the original. However a…
The ones you can purchase are cheap and work well, but in a pinch why not just print a few? I used PETG for it's flexibility and printed at a 45º angle to not have weakness at the layer lines. Two of the files are straight up and two are…
Assembly instructions: https://eiffeltower.nenoff.com/ Stability test video: https://www.youtube.com/watch?v=wlf7PaVMOOA Please share your build! I am fascinated by the tensegrity (tension & integrity) buildings and structures. They look…
Printed CORNERS for the hexagonal shelf we had on Prague Maker Fair 2018. We used it to display printed models. 10x10x160mm Aluminium sticks are used for prisms. Prisms are secured by hot glue sticks (of course, what else...). All the…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
The idea of this model was to reduce the amount of material to a minimum. Tower height 140mm and 24 gramm of filament. Easy to print. No support structure needed. Sand clock design.
Organic Chemistry Stencil – Precision and Clarity in Every Structure Dimensions: 120mm x 80mm Designed for students, educators, and professionals, this Organic Chemistry Stencil is the ultimate tool for creating accurate and neat chemical…
These are quite strong, and should hold up quite well. Sizes range from: 43.2x43.2mm 66x66mm 72.5x72.5mm 98x98mm 162x162mm
The wall mount needs to be used with the other parts from the original RepRack system: https://www.printables.com/model/129024-reprack-open-source-spool-holder-and-storage-syste The original model single wall mount is meant to be used…
Explore a collection of auxetic structures, featuring both chiral and anti-chiral designs, optimized for 3D printing. These designs exhibit negative Poisson’s ratio behavior, meaning they expand laterally when stretched and contract when…
(Updated 2025 Version) English: This 3D printable artwork features the chemical structure of LSD (Lysergic acid diethylamide), one of the most well-known psychedelics. The design shows labeled atoms within a precise molecular layout and a…
I very much like the structures Imperial Terrain has put out in anticipation of SW:Legion, I wanted to make a free simple Tattooine structure. I just aped common Tattooine architecture, those guys are pretty simple, then added some vent…
EN: This is an ongoing project I'm working on, a Humanoid Robot, for my youtube channel, all the videos talking about it are in portuguese for now as I've not had the time to translate them to english yet, so if you want to follow it,…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
3D model of the layers of a leaf, including the cuticle layer, upper epidermis, palisade layer, spongy layer, lower epidermis, and stomata. It is part of a project for my daughter's biology class. It is somewhat complex to print and the…
Gyroid Lattice Structure. Added solid platforms. Ready to print, no support needed.
These are the base units of the Weaire-Phelan structure, as well as its periodic unit. The periodic units can be assembled into a 3d array without rotations. In two dimensions, the subdivision of the plane into cells of equal area with…
So 3D Printy suggested somebody try to recreate an experiment he was reading about and wanted to see it printed on a MK4. I went to work and this was the result. Both STLs for printing and SVG files for cutting available. Print .2mm…
A mounting bracket for a SiliconDust HDHomerun Duo tuner for Leviton structured media panels . I put my tuner in the basement where all of the cables terminate and the main ethernet switch lives. The tuner drops in through the top of the…
I had multiple PSUs sitting on my desk and on the ground, so I designed this structure to store them under the desk. It was the largest size I could print on my Ender 3 S1 Pro. I've printed 2 (two) of them and each one stores 2 (two)…
This model features a wireframe Rhombic Dodecahedron , designed in CAD and refined through an iterative process to form a Level 1 Sierpiński Octahedron fractal structure . It includes a seamlessly attached base and prints without…
German below. Easy and quick to print! This is my idea of a beautiful, small, stable, light and resource-saving glasses stand. The main idea is not new, but I haven't seen such a glasses stand with a structured surface yet. The surface…
150mm X 150mm X 260mm I printed this in two separate prints on the Bambu Lab P1S with a 0.4mm nozzle, Bambu Lab PLA Basic Black and Bambu Lab PLA Matte Grey and supports on.
Instructions For each samla box, print: 2x stand leg 2x stand leg mirrored 2x structures For a 4 spools air-tight box you will also need from other sources: Quantity Item Comment 20 Printed washers 6 M8 washers Can be replaced with 12x…
A model designed for extreme testing in vase mode. This tall, thin structure on a stable three-layer base pushes the limits of print precision and stability with minimal material usage. Perfect for height and thin-wall calibration tests.…
A large kelvin structure matrix to print as a demonstration. It is possible, when using extreme pla from 3dmax, to support a 300lb person standing on this thin matrix, the inherent strength of the design is such. Category: Biology
Auxetic materials expand as they are stretched. This re-entrant structure uses a bow-tie unit cell that is placed in a pattern. As for auxetic structures this is a simple one. If you want to see the full 3D simulation (interactive viewer,…
This is a custom bracket for mounting equipment in a Structured Media Enclosure (SME). The SMEs found in most residential homes are designed around Leviton components which are ridiculously over priced. The Leviton pushlock pins are…
UniFi Express mount for a Leviton Structured Media Cabinet . The holes are 5 inches on center. UniFi Express can be inserted right side up or upside down to best fit your application. The opening on the bottom is large enough for the…
a model of diamond cubic crystal structure because the vertical rod is hard to print on an FDM printer so I made a separate version.
