Search results: t7

Sort order

502 models

P
PrintablesMichaelQ

Stromer Mudguard Extension V9 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
349
Likes
29
Rating
4.71
P
PrintablesMichaelQ

Stromer Mudguard Extension V8 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
243
Likes
22
Rating
4.5
P
PrintablesMichaelQ

Stromer Mudguard Extension V10 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
219
Likes
20
Rating
0
P
PrintablesMarius Mihasan

T7 DNA replisome

Surface model of the T7 replisome complex as described in Gao et al., Science 10.1126/science.aav7003 (2019). All components were printed separately and glued. Proteins subunits were printed in PLA, while nucleic (DNA, RNA, and dTTP) in…

Print approx. €2.88–€3.53 excl. taxPreliminary estimate for one variant

Downloads
107
Likes
34
Rating
0
P
PrintablesHumble Bazooka

Whirlpool Dishwasher (WDT710PAYB6) Utensil Rack Support

These are direct replacements for the Whirlpool WDT710PAYB6 Utensil Rack (part# WPW10671904). Save yourself $20. Printing Settings: Print these in a stronger filament like PETG, ABS, etc. Supports needed

Print approx. €1.76–€2.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
55
Likes
7
Rating
5
P
PrintablesMichaelQ

Stromer Mudguard Extension V12 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
6
Rating
5
P
Printablespeterkikta

Foot for a Rear Camptools Slide Out Tray for VW T7 New Multivan

I needed to push the drawer as far back as possible. As the metal contact surface would eventually damage the car's plastic, I made this foot that slightly lifts the drawer and moves and extends the contact surface back into the car's…

Print approx. €3.38–€4.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24
Likes
3
Rating
0
P
PrintablesV1 Engineering

Makita RT700 series (65mm) mount for the MPCNC Primo

This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches. The tool also needs to be angled either direction so the corner of the top housing does not hit the bolt heads. No calculator offset needed,…

Downloads
2,275
Likes
139
Rating
4.89
P
Printablesensoniq2k

Magura MT5 MT7 MT8 MT Trail Caliper Cover Decorative Ring Blende

Update 2023: Bought an MT8 and added a fitting for it here. --- You want to customize your Magura MT5/MT7/MT8/MT Trail Calipers without spending a fortune on those expensive plastic rings? Look no further, this model has you covered.…

Downloads
1,391
Likes
106
Rating
5
P
PrintablesDanielAlex

Star Wars T70 X-Wing

“Its profile resembled the T65B X-wings she'd flown with Alphabet, but its foils and thrusters were unexpectedly slender and its canopy extended farther over the nose." [From Alphabet Squadron: Victory's Price , Chapter 18] The T70 X-Wing…

Downloads
714
Likes
120
Rating
0
P
PrintablesEddy

Case for Adafruit 1.8 Color TFT LCD display with MicroSD Card Breakout ST7735R

This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…

Downloads
614
Likes
22
Rating
5
P
PrintablesLuckyMenace

Magura MT5 MT7 MT8 Caliper Covers (UPD 2024)

As described above - 4 off versions currently. I had better success printing in PETG with textured spring steel sheet, as the PLA did not want to seem to stay stuck - YMML. Updated 12/11/2022 to include ‘Nukeproof’ logo type model…

Downloads
592
Likes
76
Rating
5
P
Printableschappyman66

Lola T70 Slot Car Kit

I took the body kit and remixed it to make a slot car shell by opening all of the holes. A motor plate and window buck are included, to make vac form windows. I would scale it to 58W X 125L x 29H (it's close but you should adjust in your…

Downloads
570
Likes
43
Rating
0
P
PrintablesHyperbeam

Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2

Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2

Downloads
569
Likes
17
Rating
5
P
PrintablesGrzegorz

Samsung T7 Shield SSD Drive Bracket

Samsung T7 Shield SSD Drive Bracket 20mm clear or 50mm made for my mini studio Apple stand with filter ( upload in future ).

Downloads
557
Likes
43
Rating
5
P
PrintablesJace1969

SW T70 Air XWing

I've had this in my collection for a long time. Not sure if it is even possible to print as it is so detailed. You may get away with it if you printing in quite a large scale. Any way I thought someone might like to take it on as a…

Downloads
518
Likes
47
Rating
0
P
PrintablesSavageLau

Samsung T7 Case

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Downloads
480
Likes
72
Rating
5
P
PrintablesNorseEngineer

Garmin Varia RCT715 Adapters

Description Garmin just released a new version of their popular Varia Radar system: the RCT715 . This product diverges from the rest of the Garmin line, in that it no longer has the quarter turn mount, and the existing mounts out there…

Downloads
477
Likes
39
Rating
5
P
PrintablesLoboThirteen

Display Mount for BTT PI TFT70

You Need: 2x Cap Head Screw M6x12 2x 3030 Drop-in T-Nut M6 8x Cap Head Screw M2.5x10 1x Cap Head Screw M5x40 1x M5 Nut

Downloads
458
Likes
67
Rating
4
P
PrintablesKevin

1.8" st7735s Display Case

Printed with Prusament PETG Jet Black 0.2mm support is required on the bottom piece.

Downloads
456
Likes
26
Rating
5
P
PrintablesSmidt Builds

Bosch 6 inch Random orbit sander wall hanger GET75-6N

I designed this wall hanger to fit my Bosch 6'' random orbital sander Bosch GET75-6N. It is printed in two pieces to allow it to be easily printed on most 3d printers. With the screw holes being inline with each other this can be screwed…

Downloads
447
Likes
66
Rating
5
P
Printablesmfischer79

Samsung T7 Shield USB Cable Caddy

Never lose your cable again! Clip this on to your drive. Supports all cable sizes. Designed for the original cable.

Downloads
438
Likes
60
Rating
5
P
PrintablesGeddy

Samsung T7 and Samsung T5 SSD Stand(s) - UPDATED

I've decided to organise my SSDs so they would be safe, convenient to use and spaced between if they would ever get hot during the process. The stand I've created originally is made of four parts and accommodates: 1x Samsung T5 SSD 3x…

Downloads
422
Likes
62
Rating
0
P
PrintablesACookA

Magura Quick Reach Adjust MT4 MT5 MT7 MT8

Hey guys, I felt the need for a simple solution to adjust/fine tune the reach of my MT5 brake levers without having to find a 3mm hex and designed this little piece. Fits great on my HC 1-finger levers. Should also fit other Magura brake…

Downloads
399
Likes
39
Rating
4.5
P
Printablesscross01

ST7789 TFT Display Screen Case

This is slim compact case for a ST7789 I2C 1.54" TFT Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. As with the other slim cases I've created the model's clearances are very tight…

Downloads
390
Likes
16
Rating
5
P
PrintablesdeKay

Tenere 700 (T7) screen height adjuster

SCreen height adjusters for the Yamaha Tenere 700. STL file for left side included, mirror in your slicer for the right side. Print at 0.2 layer height, the model contains a single layer to be drilled out for the mounting holes, so no…

Downloads
384
Likes
22
Rating
5
P
Printableseffae

Samsung T7 SSD holder/mounting bracket

A mounting bracket for the Samsung T7 SSD, based on the design for the similar but smaller T5 by perlmunger[1]. Especially handy for mounting the SSD to a camera such as the Blackmagic Pocket Cinema Camera (or any camera with a 1/4" screw…

Downloads
364
Likes
49
Rating
5
P
PrintablesFizzy

FT BTT Pi TFT70 screen mount

INTRODUCTION With the popularity of BTT Pi screen, there has been a request to support the biggest model the Pi TFT70. THE DESIGN The screen mount was designed to be in line with other BTT Pi TFT mounts. For the Pi TFT70 screen, it…

Downloads
360
Likes
49
Rating
5
P
PrintablesNicoNicoNii

Tenere 700 T7 airfilter snorkel

Hi, this is a remix of the snorkel made by Chris1974. I changed the wide orizzontal openning to one with 90°curve, like the oem one but without the internal conduit wich reduces the filtering surface area of the air filter to the bottom…

Downloads
349
Likes
11
Rating
5
P
PrintablesDavid Wilson

Samsung T7 4-Bay Drive Dock

Stylish Solutions As a video editor I have these drives laying everywhere and needed a way to keep them together. It reminds me of the old G5 Mac towers, though it could be designed to match exactly. There may be a version 2 coming with…

Downloads
348
Likes
78
Rating
5

Screwless Caddy for DELL PowerEdge R310, R320, R410, R415, R510, R515, R610, R710, T610, T710

A screwless caddy for DELL PowerEdge R310, R320, R410, R415, R510, R515, R610, R710, T610, T710. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: eSUN PLA Notes: Customs…

Downloads
340
Likes
28
Rating
0
P
PrintablesDragonRR

Bezel and template for 1.8" TFT ST7735

I made this to contain a 1.8"TFT screen ST7735 and attach it to a project box which contained an Arduino. The template allowed me to precisely cut out the holes for the cables and the screws to hold it in place and then seal the main box…

Downloads
339
Likes
6
Rating
0

Blast Gate for 50 and 75mm / Schieber für HT50 und HT75mm

Hi, these Blast Gates is for 50mm and 75mm tubes. The four holes have 6mm diameter. Hallo, dieser Absperrschieber ist für HT50 und HT75 Rohre. Die vier Löcher haben einen Durchmesser von 6 mm. Update 10.01.2024 The thickness of the slider…

Downloads
330
Likes
25
Rating
5
P
PrintablesSpotkenyon

Gridfinity Samsung T7 SSD Holder

Gridfinity Holder for Samsung T7 SSDs. The 2 small bins on the side were added just to use the leftover space. They can be used for the cables that come with the SSDs or whatever else.

Downloads
329
Likes
30
Rating
5
P
PrintablesZK

Proxxon KT70 PCB CNC (micro) mill

I wanted to build a cheap and accurate CNC mill, to engrave and drill simple PCB boards. The build is using easy to get components (mostly 3D printer parts), and some printed parts. The plan was also not to make any irreversible changes…

Downloads
322
Likes
73
Rating
0
P
PrintablesCenaxa

Taser T7

Réplique approximative d'un Taser T7

Downloads
321
Likes
37
Rating
5
P
PrintablesHeuschnupfer123

VW T7 Multivan luggage rack / Gepäcknetz eyelet-adapter

In our old california we were used to have some eyelets, carabiner and so on nearly everywhere in the car to store / attach / hang stuff on it (like glasses, shopping bags, night-lights, etc.). As the T7 Multivan is not intentionally…

Downloads
320
Likes
32
Rating
5
P
PrintablesRamjetX

RamjetX - Samsung SSD T7 Dock Mount - Hot Swap Dock

Hi internet peoples! Recently purchased a couple of Samsung T7 Portable SSDs...( https://www.samsung.com/au/memory-storage/portable-ssd/portable-ssd-t7-1tb-gray-mu-pc1t0t-ww/ ) My word they're fast and stunning to look at. But carrying…

Downloads
307
Likes
49
Rating
5

DT71 Rugged Box

I wanted a box to store the DT71 tweezers that had the same size & shape as my TS101's box. I made this to accept the foam insert from the original case as I quite liked that part. You will need 6 M3x20 screws to make this. STEP file…

Downloads
304
Likes
46
Rating
0
P
PrintablesFudgy The Well

Gridfinity Samsung T7 SSD

I created a Model to hold 3 Samsung T7 SSD's Laying on the long side so it fits in the top drawer of an Ikea Alex. it also fits the two cables that comes with the SSD's

Downloads
288
Likes
35
Rating
4
P
PrintablesSzymon Szpularz

Volador VX5 T700 GPS Mount HGLRC M100 5883 and other

GPS mount for FlyFish Volador VX5 for the original antenna mount, compatible with all GPS units with dimensions of 21x21mm. No screws are required to mount the module. Print settings: Material - TPU Infill - 50% Walls - 3

Downloads
285
Likes
17
Rating
0
P
PrintablesDakaar

Nailless Flat cat7 Ethernet Cable Clip for Cables 7.5x2.5mm

A cable clip for attaching flat ethernet cables to walls/skirting boards. I wanted some something to attach a new cable snaking through the house, to the wall. i didn't want to use nails so i designed this to use 10x10mm double sided…

Downloads
284
Likes
35
Rating
5
P
Printableshalbgaspilot

Rugged SSD Case for Samsung T5 / T7 (Step File Available)

I designed this rugged SSD Case for a Samsung T5 and a T7. The small Gaps between Case and SSD are for Ventilation so that the heat can escape either upwards (when standing up) or sideways (when laying flat on the table). I use this for…

Downloads
280
Likes
24
Rating
5
P
PrintablesHeuschnupfer123

VW T7 Multivan Ventilation-Grille-Window-Adapter

As we would like to go to camping and sleep in our T7 Multivan (2023), we just needed something for the ventilation… Some kind of window adapter… So this is the result of our idea and my first own design This ventilation grille is…

Downloads
266
Likes
34
Rating
4
P
PrintablesGrimo

WALL MOUNT SAMSUNG GALAXY TAB S7 FE (SM-T733)

Wall Mount for Samsung Galaxy S7 FE with Cable Storage This wall mount is designed specifically for the Samsung Galaxy S7 FE, featuring a dedicated space to organize your charger cable neatly. Key Features: Compatibility: Perfect fit for…

Downloads
265
Likes
3
Rating
0
P
PrintablesPFu

Samsung T7 SSD Case

A case to protect the edges of the Samsung T7 SSD. Also has a spot to which a keychain can be attached. Intended to be printed out of flexible filament (I used Filatech FilaFlexible40). It comes in two pieces that require 2 x M3 x 35mm…

Downloads
260
Likes
21
Rating
5
P
Printablesebarnes

ST7789 Display Case

I made this thing so it plugs into a breadboard. Then I added a deep box for it. In the deep box I use the standard M-F jumper cables. It snaps together no glue required. Can be opened up if you want to reuse the part Print Settings…

Downloads
257
Likes
10
Rating
0
P
Printablesaldobme

T7 Ion Disruptor rifle 1:12 Scale

This is a model of the T7 Ion Disruptor rifle, Made to go with 1:12 scale action figures to enhance a collector's display. Supports may be required for optimal results. Feedback is greatly appreciated! Be sure to give a shout out via IG…

Downloads
251
Likes
35
Rating
0
P
PrintablesMarcus

Samsung T7 Mount (Adhesive Mounting) 💪

To attach my two Samsung T7s to the back of the iMac stand, I took @OSXtraveller's (perfectly fitting!) model as a template and filled the screw holes. This modification adjusts the base so that it provides a continuous surface. Attaching…

Downloads
246
Likes
26
Rating
0
P
PrintablesKenny

GT7 Grind Controller Holder for PS5 DualSense

Rigid 27 April 2026: New! I strongly recommend using the flex model over the rigid model, because the rigid is not going to be as gentle on your controller, however two people asked for it so I've added it. To use this, you MUST ADD PUTTY…

Downloads
241
Likes
7
Rating
5
P
Printablesjglerner

BigTreeTech Stand for TFT70 and Pi 3/4

I made this remix for use with the bigger BTT TFT70 for KlipperScreen or OctoDash Infil around 25% Uses PLA+ from eSun and it keeps in good shape. No supports are needed, nor rafts and/or brims.

Downloads
233
Likes
17
Rating
4.5
P
PrintablesSphaeroX

Magura MT5 & MT7 Brake Gap (Center) Tool

Tool to center his Magura MT5 or MT7. I use it on my 208mm disc. This is how it is done: Remove wheel Brake shoes push back Loosely screw the brake caliper Insert wheel again Place the gap tool on the brake disc in the direction of…

Downloads
231
Likes
32
Rating
4.5
P
PrintablesPhil

Tooltop T7 Macro Adapter

An adapter for mounting a 20mm ZnSe lens to the Tooltop T7 thermal imaging camera dongle. This lens works very well for PCBs and close-ups: 101.6mm 20mm ZnSe Lens Assemble with M2*4mm screws, M2*2.5*3.2 metal threaded inserts and a…

Downloads
226
Likes
8
Rating
0
P
PrintablesCredomane

BigTreeTech TFT70 V3.0 Case

After printing the original model by phesketh01 (thingiverse) I believe it to be for an ever so slightly different variation/version of the BTT TFT70. Creating a number of small defects that prevented my BTT TFT7 V3.0 from fitting into…

Downloads
221
Likes
20
Rating
5
P
PrintablesTadej Tolic

Case for Samsung T7 SSD

Simple case for samsung T7 SSD with Honeycomb Design. I did the measurements on my ssd and drew approximate 0.8 mm of tolerance. The engraving can be customized to your desires.

Downloads
221
Likes
22
Rating
2
P
Printablesmfischer79

Samsung T7 Shield Case and Cable Holder

Samsung T7 Shield Case and Cable Holder for both USB cables included by the manufacturer. Originally Inspired by the T7 “Non-Shield” model to re-create this: https://www.thingiverse.com/thing:4817328 Enjoy!

Downloads
220
Likes
26
Rating
0
P
PrintablesJc3D

ESP32-S2/ST7735 1.8" display enclosure (code included)

This enclosure is made for a ST7735 TFT display module controlled by an ESP32-S2 mini. Wires have to be soldered because there aint much space inside and wont close if used with dupont connectors and headers. External screws are not…

Downloads
218
Likes
23
Rating
5
P
PrintablesGrigsby

Team Associated T7 front body mount

This is a replacement for the failure prone, and currently unavailable, T7 front body mount. I wanted a replacement that was somewhat aesthetically pleasing so I made my own. Print these out of TPU if you want nearly indestructible, or…

Downloads
210
Likes
4
Rating
5
P
Printablesagger

BTT TFT70 Pi 4 case

Based off Display Mount for BTT PI TFT70 by LoboThirteen Items needed: Raspberry Pi 4 Computer Model B BTT TFT70 touchscreen 4 M2.5*6 screws 4 M2.5*8 screws 4 m2.5 heat inserts For mountable enclosure use LoboThirteens frame mount…

Downloads
207
Likes
28
Rating
5
P
PrintablesHercules

DJControl Inpulse T7 Backspin Washers

Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.1 mm (Quality) Infill 15% No support needed Materials recommended: PLA Printer used for prototyping: Prusa XL Type of bed used for prototyping: smooth All…

Downloads
204
Likes
26
Rating
0
P
PrintablesGearomatic

SSD holder for Hot Shoe Mount compatible With Samsung T5 and T7 SSD

This is a T5 and T7 SSD mount for the top hot shoe mount on a camera. All the T5 and T7 SSD mounts I found used a screw, which not all cameras have Updated to include a version for t5 which i did not know was thicker. I do not own the T5…

Downloads
204
Likes
15
Rating
0
P
PrintablesDJDevon3

ST7796S Display

I needed an accurate model of this display for designing a 3D printed enclosure for it. This is only a model of the TFT display. Download includes: .f3d, .step, .stl Edit: 2024-03-05 Due to an incorrect measurement the pin and mounting…

Downloads
203
Likes
3
Rating
0
P
Printablesptmays

Case for BTT Pi TFT70 screen (Updated)

https://biqu.equipment/collections/lcd/products/bigtreetech-pi-tft43-v2-0-screen-board?variant=39337700851810 This case is for the BIGTREETECH PI TFT70 V2.1 Touch Screen For Raspberry Pi…

Downloads
200
Likes
24
Rating
0
P
Printables43D PRINT

Volkswagen Multivan t7 eye to ceiling hole

Multivan t7 eye to ceiling hole use glue for assembly Print settings 0,2mm layer 8 walls 30% infill no supports

Downloads
192
Likes
14
Rating
5
P
PrintablesJuanForma

MacetaPot7

Esta impresión se hizo en PLA. Aprox. 15 horas con pico 0.4mm

Downloads
185
Likes
18
Rating
0
P
Printablestmmy_xo

Samsung T7 Shield holder for Macbook

I've designed this model to securely hold my T7 Shield on the back of a screen, it sits tight and doesn't slide around when you tilt the screen. I also have a cable holder model for this SSD, check my profile.

Downloads
181
Likes
18
Rating
5
P
PrintablesMarcus

Double Samsung T7 SSD Mount for iMac Stand

This is the successor of https://www.printables.com/model/293801-samsung-t7-mount-adhesive-mounting and allows attaching one or two Samsung T7 SSDs to an 27″ iMac stand. The SSDs are clipped into the holder, the holder is then slid over…

Downloads
180
Likes
22
Rating
4
P
Printablesebarnes

ST7735 Case

This is a case I made to house my ST7735 Displays. It snaps together requiring no glue and I used breadboard jumpers to expose the pins since they were so short on the part. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts:…

Downloads
179
Likes
6
Rating
5
P
PrintablesVadym Bat

Samsung T7 SSD case

Minimalistic protective case for Samsung t7 SSD. Printed with flex filament. Approximately 6g of filament per one part. Parameters: speed: 30 mm/s nozzle temperature: 250 bed temperature: 35 infil - 15% perimeters: 2 layer hight: 0.15 mm…

Downloads
171
Likes
28
Rating
4.33
P
PrintablesBlackyIV

BIGTREETECH PI TFT70 mount

A BTT PI TFT70 mount for a 2040 aluminium profile. Parts Needed: 4x M3 T-Nuts 10x anykind of M3 x 10 screws 6x M3 Nuts 4x M2.5 x 10 Screws 4x M2.5 x 6 Printed parts needed: 1x Base 1x Frame 4x spacer Printsettings [Screw]: Layerhight:…

Downloads
168
Likes
17
Rating
0
P
Printablesper-form-3d

Trimmer Blade T732

Trimmer Blade T732 for Einhell, Parkside and other Grass Trimmers. I recommend to print with PETG or ASA.

Downloads
166
Likes
20
Rating
5
P
Printablesd.d.leeuw

Samsung T5 & T7 external SSD holder

This simple SSD Holder is a compact and efficient solution for holding up to 4 Samsung T5 or T7 external solid state drives (SSDs). Designed with the user in mind, this holder allows you to keep your SSDs organized, secure, and within…

Downloads
162
Likes
17
Rating
0
P
PrintablesZsóka

BTT TFT70 2.1 + BTT Pi 2 Case

This is a combined 7" BTT TFT70 2.1 touch screen and a BTT Pi 2 , which you can use for 3D printer control, or as an independent computer if you need it. (Software dependent!) Using the dimensions of the "Talp" connector, individual…

Downloads
160
Likes
13
Rating
0
P
PrintablesJohination

ESP32 Dev Kit C V4 & ST7735s Display Case

I changed the height to create enough space for the relatively large ESP32 with the pin strip I also enlarged the hole on the side for the micro USB port i use this ESP32 - AMAZON LINK

Downloads
157
Likes
10
Rating
0
P
Printablespaul_jkb

Samsung T7 SSD Case | Mac Finder Icon

I'm not the best 3d designer so please improve/remix the model if you want :) Printed on a Prusa Mini with PLA

Downloads
156
Likes
44
Rating
0
P
PrintablesHelmchen

Beyer Dynamic Schieber / Slider DT770 and more

Since the original sliders regularly break in the same place and the original replacement part is only available as a set with rockers and screws, I have tried to design a more robust version of the slider housing. Even if they break just…

Downloads
156
Likes
10
Rating
5
P
Printablesdelta2529

Xbox Series S External SSD Mount (Samsung T7 Drive)

Created an integrated mount for an external SSD I use with my Series S to store previous-gen games. Designed to keep the drive mounted at the side of the console in standing orientation and prevent it from dangling around and eating up…

Downloads
156
Likes
61
Rating
5
P
Printableskaplaars

New holland T7 key chain

Hey there, here is my design that i made for my uncle, a farmer who drives a T7 new holland Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 100 Filament:…

Downloads
155
Likes
6
Rating
0
P
PrintablesBartek

Cable Comb v5 (cat7 insert)

Cat7 insert for Cable Comb v5

Downloads
153
Likes
18
Rating
5
P
PrintablesSquasherJoe

TTGO T7 ESP32 Enclosure with Battery Compartment

Enclosure for TTGO T7 ESP32 Board and a LiPo battery Designed for portable use of the TTGO-T7 ESP32 development board. I recommend supports for the clips on the part that holds the ESP32 and slides into the case. Fits into a trouser…

Downloads
152
Likes
21
Rating
0
P
PrintablesMohammadAG

Samsung T7 Shield Skadis mount

Skadis mount for the Samsung T7 Shield, the hole for the USB-C cable from the bottom is left intact from the original model, so you can attach the cable put it on a hook or tuck it behind the drive. Print with supports, the 3MF file…

Downloads
152
Likes
20
Rating
5
P
PrintablesPetar Matić

Samsung T7 SSD Duo Case

If you found this helpful, please consider supporting my work! Need a custom print? Contact me on Instagram @printsbymxtc Want to support my work? Donate here!

Downloads
152
Likes
10
Rating
5
P
PrintablesDJDevon3

ST7796S TFT Display Enclosure

The front and rear are held together with 10mm x 3mm round magnets. There are cutout slots on each corner to insert the magnets then back-fill with filament from a 3D pen or soldering iron. The holes on the bottom of the case are for…

Downloads
148
Likes
5
Rating
0
P
Printableshardiebotha

Led Lenser T7 Battery Holder

I found another battery cage for a Led Lenser T7 on Thingiverse but the thread was too small, and it had no holes to screw down the cap. The button also did not fit properly. Anyway, I wanted to experiment with printing threads. I modeled…

Downloads
145
Likes
5
Rating
5
P
PrintablesEdouard

Varia RCT715 Specialized SWAT saddle mount

Please review, it was designed for someone else i cannot test it. 2025-04-10/No setback model now available no support PA6-CF 3rd iteration

Downloads
142
Likes
13
Rating
0
P
PrintablesGuilouz

FLSUN Super Racer PITFT70 Case & Mount

FLSUN Super Racer PITFT70 Case & Mount. - Use x4 M2.5x8 screws to fix screen to back cover - Use x2 M2.5x16 to fix front cover to back cover - Use x2 M2.5 x13 to fix back cover to support I have also include Spool Holder that use x4 608ZZ…

Downloads
138
Likes
33
Rating
0
P
PrintablesErnie101

Dewalt large Tough Case+ divider DT70763-QZ

Remixed from "Dewalt and Craftsman Case Dividers" by benjamenjohnson (thing:3480845) adjusted the heigh to fit this larger Tough Case+. Print Settings Printer: Ender 3 V2 Rafts: Doesn't Matter Supports: No Resolution: 0.20mm Infill: 15%…

Downloads
138
Likes
27
Rating
5
P
PrintablesMike

Samsung T7 Shield piggyback

I will have 2 of these Samsung T7 Shield SSDs and wanted a way to organize them. After seeing the OP design, it was clear what I needed to do. All I did was take a slice of the model, in TinkerCAD, and made it 15mm wide. Then, make a…

Downloads
136
Likes
22
Rating
5
P
Printablesdylan

Gridfinity 2x1 for Samsung T7 Shield SSD holder

6U high Internal dimensions of the slots as other types will likely fit as well: 61mm x 14.8mm Printables | MakerWorld

Downloads
133
Likes
12
Rating
5
P
PrintablesOlivier Mottard

Samsung T7 SSD bumper case

A TPU case for the Samsung T7 SSD I used 85A TPU at 0.15mm layer height and 100% infill, but 0.2mm should be fine. This model is not compatible with the T5 or the T9 SSD since the dimensions are not the same , but the parameters can be…

Downloads
132
Likes
13
Rating
0
P
Printablestoaster

Beyerdynamic DT990/DT770 pro slider houseing

This is a replacement for the DT990 slider housing that I modeled after mine cracked. Beyerdynamic offer a replacement part for sale but I didnt want to pay as it was simple enough to model. Print both sides with the flat face down…

Downloads
130
Likes
5
Rating
0
P
PrintablesLean 3D

2 and 5 x holder for Samsung SSD T7 disc.

They are a bit tight because of the layer shit seam, just scratch of the seam.

Downloads
130
Likes
10
Rating
3
P
Printablesdankor

ZOTEK ZOY ZT702s SCOPOMETER HOLDER COMPATIBLE WITH BST-050-JP PROBE PLUGS

Przygotowałem model pod mój multimetr kompatybilny z sondami bst 050 jp i ich fabrycznymi zatyczkami. wydruk petg ------- I have prepared a model for my multimeter compatible with bst 050 jp probes and their factory plugs. petg print

Downloads
130
Likes
25
Rating
5
P
PrintablesXalies

PITFT70 V2 Mount

Mount for a BTT PITFT70 V2 and a Raspberry Pi 4 Screen mounts to the back half using the standoff and screws provided with the screen and the front is attached using 4x25mm M3 that cut their own thread, the rear mount uses 4x4mm M2.5 and…

Downloads
129
Likes
15
Rating
0
P
PrintablesBartvl

magura mt7 and gustav brake piston blocker

Tool for magura mt7 and Gustav 4 piston brake calopers. Blocks 3 of the 4 pistons so that they can be moved one by one. Print on the side, no support PLA

Downloads
128
Likes
9
Rating
0

CASE DISPLAY ST7735S 0.96" 80x160

I design a compact case for the DISPLAY ST7735S 0.96" 80x160. It includes cutouts for pins and it has guillotine closure. Be sure to have the same model otherwise it doesn't fit as well as you see in the picture. If you need help or you…

Downloads
128
Likes
7
Rating
0
P
PrintablesHercules

DJControl Inpulse T7 Knobs, Faders and Encoders

Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…

Downloads
127
Likes
28
Rating
0
P
PrintablesPiotr Zabłocki

Ramka dla ekranu 1.8" TFT ST7735

Ramka do montażu z modułem wyświetlacza LCD SPI TFT 1,8 cala ST7735 (1.8 TFT SPI 128*160 V1.1 - czerwone pcb).

Downloads
127
Likes
0
Rating
0
P
PrintablesPavol Drahula

Bigtreetech PI TFT70 V2

Frame selfmade middle skir and holder from voron mods: https://mods.vorondesign.com/detail/GzD8TM9kzlhgDBMIjUG0w

Downloads
125
Likes
13
Rating
0