105 models
Printed with 100% infill PETG for strength and durability. No supports are needed. Stronger material could be used if desired.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
Covers for the Tailgate lock mechanisms in a VW T4 Transporter. Separate VW logo which can be printed in another colour and glued in
A simple bracket in three different sizes allows you to let the tailgate slightly open for fresh air while you sleep in the car. Moreover, the vehicle can be locked when the bracket is installed. Features Lock your car while keeping the…
My BMW E39 wagon (touring) was missing the plastic clips at both sides of the tailgate. These clips hold the plastic side covers in place. Since the original spare parts (BMW part number: left: 51498217213, right:51498217214) are way too…
I wanted a backrest for my Element, but I wanted a more inexpensive option. So what better option than to make it myself? Here's the parts list. ¾" electrical conduit.…
This model is a remixed version of tailgate covers for a Ford Maverick. I added vent openings to allow any trapped water to drain or evaporate.
English: The clip for the tailgate trim which breaks when you disassemble it. German: Der Clip für die Heckklappenverkleidung welcher bricht wenn man diese demontiert.
This hidden bumper door is designed for neat installation of an electric hook-up, water in- or outlet , or any other accessory you may want to ‘hide’ behind on of the bumper bellies left or right. The design uses the original bumper belly…
This part was modeled after a Ford E83Z-5421952 B clip in all the critical ways. The endeavor took entirely too long to justify the price savings, but now that it exists, give it a try. I'll admit it's not as good in fitment nor strength…
My tailgate bumper on my 2019 F150 kept falling out. I bought another one but the same thing happened so I printed a new pin that is a little longer and holds the bumper in place. This piece is pretty small and the outside piece should…
The tailgate latch rod clip is a small clip that holds the tailgate latch rods to the handle. It seems to commonly break on some trucks. This is designed for my 1995 Toyota T100 truck, but the design seems pretty standard. The rod on my…
These are a small brackets which ensure that you can fix the broken Toyota Prius 2 tailgate with some new screw/nut and with some minimal glue. Unfortunetly I made it a two years ago, so I don't know how long screw and what kind of nut…
Dividers for the 2023 Chevrolet Colorado's Stowflex Tailgate. The dealer charges $90 for this accessory, so I made it myself. This is not perfect, but it fits well enough to work and allows me to keep things from moving around too much in…
This 3D model is a replication of the OEM tailgate bushing designed for the 2016 Toyota Tacoma, part number #66143-04020. I printed this in PLA for fitment testing purposes but have not tested other materials.
Bed Rail stake pocket cover. Should work on: Chevy Colorado / GMC Canyon 2023-2026 Chevy Silverado / GMC Sierra 2019-2025 Print in ASA for UV and Temperature resistance.
The tailgate panels of the 700 and 900 series often suffer from cracked mounting points. I decided to come up with a neat way to fix this. I've design a few parts that can be printed on a 3D printer. Make sure you use ABS of ASA material.…
Thank you wov, mrmossevig, Mr_Orange_Juice, the_qsr, Toucan21 for the original models. Tesla Cybertruck snap fit model with moonroof, rear window, and blank articulating tailgate. Multiple remixes combined with my own addition of new…
Includes: Front badge Rear handle for SEAT LEON 5F (I dont know if is same in another vehicles) Compatible with all cars with new logo. Just check size. Big is from facelift SEAT Leon 5F and small is from SEAT Leon 5F prefacelift. I…
This cup holder is designed to lock into the latches on the sides of your tailgate. Snap one or both into place and you do not have to worry about them falling out. To get them out all you have to do is pull the tailgate handle and pull…
Compatible with the first gen suzuki sidekick and geo tracker. Only tested on my car. This is a large piece so you will have to cut it in your slicer and print in multiple parts. I used superglue to attach the pieces, acetone or an ABS…
The tailgate bushings in my Ford F150 finally wore out to the point it was hard to close the tailgate... You know what that means! Yep - Time to fix it with 3D printing! I modeled this set off my worn out parts and eyeballed a few things…
Originally posted by me at https://www.thingiverse.com/thing:4236153 Probably the same fit as other Peugeot, Citroen, DS and maybe even Opel car models. I hope you still kept the springs! This one is a revised one. The pictures with the…
Uploading this in case anyone wants my tweak of m7550's excellent hole cap design, if you're going to print yours out of a rigid material, his is the way to go and I've linked it below. Because I have an unhealthy obsession with TPU, I…
Aftermarket tailgate handles for this Tundra are very weak and the whole mechanism has to be bought to get a replacement handle. After going through 2 of them I modeled this replacement and beefed up the areas where it sees the most…
When you have ladders/plywood/pipes/whatever hanging out your tailgate and it won't close, it beeps all the way home, and that's annoying! Insert this into your tailgate, the locking mechanism will grab it, and then it will shut up.…
Elevate the style and functionality of your Toyota Auris Estate with this tailgate handle cover designed to seamlessly blend practicality with sophistication. Crafted from high-quality plastic, this piece seamlessly integrates into the…
My Fiat 500 tailgate handle remade in ABARTH version. The scorpion is press fitt to the handle, no glue needed. I used a hammer to gently knock the scorpion into position. Print w-out support, at least 5 wall loops and 30 infill.
Update: I have a new version which preserves more visibility, is less bulky, and more drop-proof here (but requires a large bed printer): Many trucks have the backup camera on the tailgate which renders it unuseable if hauling a load with…
This was modelled on the one that comes with the vehicle after mine cracked
The former owner had tried to fix this with superglue. It eventually came loose so i reconstructed it and printed in Prusament PETG. Some finishing might be required to smooth it out. Also i used three perimeters and support ewerywhere.…
Update 2024-01-13: Re-designed the rod retaining portion as my last one seemed to get loose over time. Also fixing the portion that clips into the track on the truck bed to no longer push in but just rotate it in. I found ~6.5mm was the…
If the rubber piece that cushions closing your Ford F-150 tailgate was found lying in your truck bed, maybe the retainer rivet broke. Here's a replacement. Printing PLA and PETG didn't work for me, as the tiny “legs” of the female part…
Needed a box to house my camera since I removed my tailgate from my 2022 F250 so I could put my slide-in camper in. I removed the camera from the tailgate handle area (not so easy but doable) and made a box using Fusion 360 to accommodate…
It seems like every Gen 2 Brat is missing the trim on the tailgate. If you manage to find one for sale the price is usually outrageous, so I made this to be accessible to anyone with a normal sized printer. It prints in parts and you…
Printed on a Prusa MK3s+ with PETG 15% infill.
I needed a tailgate latch clip for my 1994 Chevy Silverado pickup. This should work with all the tailgates of this body style but YMMV. Found the original but it was for a newer pickup. I remodeled this one in SolidWorks and made the…
This is a backup camera mount that replaces the tailgate handle bezel. 3MF Notes : The 'NO AMS' file uses standard support settings, and does not require an AMS The 'AMS' file uses a different material for supports, and requires an AMS.…
I have a 2007 Chevy pickup and have had a plastic retainer on the tailgate handle break. They are only sold in pairs, since each side requires its own orientation. The set is expensive, so I decided to make my own.
This was made to secure my fishing rods when transporting them fully assembled so that they do not bounce on my tailgate
Texas Tailgaters Banana Ball League team.
Tailgate trim panel clip for Land Rover Freelander 1, 3D printed on a Bambu Lab P1P in PLA. Although printed in PLA, any other material is recommended for increased durability. The clip holds well even in PLA. Printed without supports and…
I modified the Flatbed to make it straight and add a tailgate. Also have reinforced the base.
This is the rear scan of a 1988 Suzuki Samurai. Should be the same as a Jimny and a Sierra. I took this to design a bumper for it, and it should work for other needs as well. If you design something cool with it, share a pic!
my handle broke so i deigned the new part to fix it. just mirror the file to get the left and right side please printed in petg supports 100% infill
Tailgate handle. Angeled so that you get leverage when you pull the hatch downwards. Print Settings Printer: Anycubic i3Mega Rafts: No Supports: No Resolution: 0,3 or 0,2 Infill: 15% Filament brand: add:north Filament color: Aurora Green…
This is for the faceplate for the Chevrolet Bowtie on a Silverado EV RST
2005 Toyota Tacoma Tailgate Screw insert
These are the end caps for the hollow top rails on the tailgate and bed sides of an S110P Daihatsu Hijet Japanese mini truck. These end caps are often damaged or missing on older mini trucks and it may be difficult to source replacements…
I printed it in PETG but it would be preferable to print it in a more resistant material.
Replacement tailgate handle compatible with the VW Passat B8. Designed for a precise fit and easy installation, making it a practical solution for replacing a damaged or worn original part. Suitable for 3D printing and everyday use.
https://youtube.com/shorts/Sc6k7f5ZH4o?feature=share
Tailgate bumper for 2000 - 2006 Toyota Tundra
This tailgate handle bezel will fit all 1988-1998 OBS style Chevrolet pickup trucks 3MF Notes : The base file uses ASA as the primary filament. ASA is recommended due to the outside temperatures and UV exposure. ABS or PETG can be used,…
Volvo 940 tailgate interior upholstery repair parts. Fixes cracked mounting points. Bottom Side replaces outer mounting points (2) on tailgate interior upholstery. Bottom Center replaces inner mounting points (2) on tailgate interior…
This 3D printed tailgate support bracket is designed to hold the vehicle tailgate in a lowered and stable position when carrying slightly protruding loads . It helps distribute the load more evenly and reduces strain on the tailgate…
There's an access panel on some Toyota Sienna Minivans (2006 for me) in the tailgate. I modeled one out and made mounts for two battery powered LEDs. I often use the tailgate to shield myself from the rain while out camping, and there's…
The OEM rubber material goos up in a few years and jams the switch, and is sticky to the touch. Yuck. Print this in TPU, which should have a much longer lifetime. I use NinjaFlex TPU Filament…
Replacement plugs for the little holes on the bottom of the Honda Acty HA4 tailgate and sidegates. I think these are the same as some of the plugs in the cab as well but I haven't tested. There are five versions included that are all VERY…
inserts for reinforcement/repair of the e46 tailgate handle (tested on sedan with a "newer" handle bar, which broke again after some years....)
Replacement buffer for Saab 9-3 Cabrio Tailgate/Bootlid. Prevents the tailgate from opening too far and touching the paint. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: Doesn't Matter Supports: No Infill: 80-90…
Subaru Liftgate Bump Stop 63262 The below is from parts.subaru.com: Door Stop. Liftgate Bump Stop. Stopper Tailgate (Rear Gate). Stopper Rubber R G. Part Number: 63262AG10B Supersession(s): 63262AG10C Category: Automotive
So while trying to remove the trim, to access the spoiler screws in my C-Max, to fix a leak, I broke the black trim clips which double up as the hooks for the parcel shelf strings. Found the Ford part number which is 1471502 (3M51 R466K45…
Just a replacmeent for parts that are hard to get if at all Category: Automotive
When you install the McGard Tailgate Lock, you normally lose the ability to use the factory tailgate lock bracket. This 7mm thick piece will allow you to reinstall the factory bracket on top of the McGuard lock. If someone wants to steal…
I have a GFC camper on the back of my Tundra without windows. So I installed a rearview camera/screen setup. To mount the rear camera, I created this file to mount the camera in the tailgate handle so it's protected from direct sunlight…
This is a direct-fit replacement tailgate latch hook for the Polaris Ranger (OEM Part 5459101 ). The model is designed to match the original geometry and installs with no modification required. It can be used on either the left or right…
Dump Truck Bed with hinged tailgate
Tested on a 2025 LWB ID. Buzz with a manual tailgate. Insert the tailgait holder, insure that the holder is fully inserted. Close the tailgate gently by checking the holder is locking in the tailgate. Print in a strong filament (eg. PET)…
This is probably a part that never will be printed by anyone but me, but sharing is caring, so here you go Toyota Previa 1994 owners, a replacement tailgate handle :) How I Designed This Basically I modeled a tailgate handle by looking…
2019 Yamaha Wolverine X4 SE I made these with slots to add a wooden, painted tailgate to my SxS so I could mount a diesel heater, fuel tank, and exhaust to it. It's contoured to mostly match the trim it's mounted against, though it isn't…
Custom spacer for OBS ford. lifts the rear plexiglass so an led light strip can fit within, cool retro upgrade.
Replacement clips to hold the upper bed molding tailgate trim in place that often break when removing the trim. This design reuses the original metal spring clip so keep that when removing the old broken piece. I printed these out of ASA…
wanted to combine the two modifications for snap-fit and tilting tailgate. so here it is. i can confirm that it does work with a fair amount of post-processing. i would particularly recommend cutting off some of the hinge cylinders, as…
Suits VW T4/T5/T6 Tailgate and Barn Door Standoff, Fresh Air Vent Lock Extension Hook. If you don't have a tailgate standoff bracket in your camper you should, and if you do you really need somewhere to stow it where it's not going to…
3D printable version of Ford Galaxy Tailgate Trim Inspection Cover, spare part G06M21 U454A29 - Ford Galaxy, S-Max. Not quite like original, just used Canvas to do this exact shape. Original part looks shifted, so this version is made to…
I made these Trunion spacers for a 1951 Chevy tailgate, but should work up to 1987 and possibly later years.
Pièce permettant de clipser le support de hayon pour les citroen c3 première génération. Imprimé en PLA -basic avec le profil “strength” par défaut. Part allowing the clipping of the tailgate support for first-generation Citroën C3…
The tailgate of our fagus truck got “lost”. Not remembering what the original looked like I made this one. I printed in PLA with .6 mm nozzle and .3 mm layer height. The settings don't really matter, this is a very simple part.
I came up with an idea to add additional lights to the tailgate of my Volvo XC70. I used a 12V 2W LED light with RED and White diode. Can be alternated with other colors. Connected to the power tool battery so just in case, it will not…
The cheap replacement for A6397401535 i bought from Aliexpress came with a super flimsy washer clip that was supposed to secure one of the rods. It broke easily when inserting the rod. So here is a replacemement to save us from sending…
This is the left side tailgate bushing for a 2012 Nissan Titan
I got a Blackstone Tailgater Combo (1555). I love it. is it portable? they say so. is it easy to move? no. This really cool guy on youtube showed a cool mod (adding wheels). I loved it and did it. the only issue i had was the wheel would…
This is a clip for securing a rear tailgate sunshade. It was created as a replacement for the original clips that frequently fell out and were easy to lose.
Thanks to this tool, you will be able to easily remove the switch from the tailgate without risking damage to the paintwork or bodywork. First, remove the number plate light. It doesn't matter which side you start with. Then insert the…
Introducing the HP Otto Extended Frame Truck Platform. Included in the uploads is several variations of a pickup truck bed for the HP Otto. There's a small medium and large size with tall or short walls. Best of all there's a pickup bed…
bushing for the latch on a MK1 Caddy. - this sits inside the latch and allows the fitment of the rod securely into the latch mechanism with no slop. im not sure if these are still available for VW, but heres a quick easy fix if you have a…
Ford S-Max 2006 tailgate bulb access cover
This insert will repair the trim panel from the rear door of the FJ Cruiser of one of the two screws rips out.
Ozark Trail Tailgate Table replacement clips to hold garbage bag
Battery compartment latch. It features a mount for the factory locking mechanism. The latch is durable, having been tested over two months of active cycling, including drops and heavy vibration.
Tailgate panel trim designed for the 1992–1996 OBS Ford Truck. This set includes three versions: Blank Tailgate Panel Trim – no logo cutout 7in Ford Oval Tailgate Panel Trim – fits the larger 7" Ford oval 4in Ford Oval Tailgate Panel Trim…
Printed in Prasament PC blend. Layerhight 0.15, Nozzle 0.4mm.
Currently best working print (thru Creality) : 6 wall loops Rectilinear Top & Bottom layers 50% sparse infill - Gyroid Did not need supports You could orient so the Actuator Rod is printed length wise. Will give update once I have tried…
⚠ PART ONLY – this file contains only the BALE GATE of the Bale Trailer model, not the complete trailer. The full model (snap-fit, no glue needed) is available here:…
Citroën C4 (Gen 1) Tailgate Bumper / Rubber Stop (TPU) Custom shock-absorbing tailgate bumper designed specifically for the 1st Generation Citroën C4 (Hatchback) . This part is a direct replacement for worn or lost factory bump stops,…
⚠ PART ONLY – this file contains only the TAILGATE of the Farm Trailer model, not the complete trailer. The full model (snap-fit, no glue needed) is available here:…
If you broke that rectangular piece for manual tailgate release then this is for you
I have a 2019 Ford F350, but believe this will work on other F-Series trucks and other model years. This works with the SYNC 3 Camera System, but it's possible it might apply to other systems as well (that's up to you to determine). My…
