Plattenabstandhalter für Steba Raclette RC3
Ersetzt den Halter aus Styropor. Dieser geht leicht verloren oder kaputt. Daher habe ich dieses Teil entworfen.
- Downloads
- 9
- Likes
- 0
- Rating
- 0
48 models
Ersetzt den Halter aus Styropor. Dieser geht leicht verloren oder kaputt. Daher habe ich dieses Teil entworfen.
Simple credit card sized slate for white balance in underwater photography. Should obviously be printed in white saltwater resistant filament. I printed it in PETG as no ASA or similar at hand.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Better replacement part for parcel shelf string holding clip. Screws in instead of a clip in installation. OEM part number: 1m6867574a
Haltebacke CNC / Holding jaw CNC Video mit Erklärung:
So I think drawstring bags are unnecessary to use when it comes to trash bags. You throw them away anyways. But I wanted another comfort solution and stop knotting and doing things to keep the trash bag in place. Here's what I came up…
Modeled after the .357 variant, based mainly off photos with a handful of measurements off a real example.
The wheel is designed to be printed without the use of supports while still looking like an ordinary skateboard wheel when installed. TPU at 100% infill recommended every other material should be fine too might not be as durable.
Hier ein Ersatzteil für den VW Passat 3BG B5.5. Nach Jahren ist das flexible Band am Tankdeckel gerissen und musste ersetzt werden. Die Maße sind von dem Original Band entnommen. Gedruckt habe ich es mit Fiberlogy FiberFlex 40D,…
Easily printable mesh wastebasket! Prints without supports, and has almost no overhang. Tested at 0.2 and 0.28 layer height successfully on Bambu X1C No specific settings are required to print this model, but make sure your retraction…
Das hier ist ein Halteband Ersatzteil für dein Tankdeckel, das dafür sorgt das du dein Deckel nicht verlierst. Und ist für den VW Golf 4. gedacht bei den anderen Modellen weiß ich leider nicht ob dieses Ersatzteil auch passt. Ist auf…
Bei meinem Nissan Micra war der Verlierschutz für den Tankdeckel gebrochen. Ich habe dieses Ersatzteil mit “TPU Medium” von Extrudr (A98) in weiß und anthrazit gedruckt und mit einer M4x16 Schraube und einer Mutter unter der Tankklappe…
100 % infill with TPU Filament Für das auswechseln des Bandes gibt es im Internet genug Anleitungen. Dadurch das mein Modell sehr einfach aufgebaut ist, lässt sich der Deckel am Band mit einer Büroklammer am besten und einfachsten…
3D Printing settings Layer: 0,2 Material: Up to you Supports: No
Hinged Cover for Rubbermaid Medium Deskside Wastebasket 2956. There are two models, one for attaching the lids with 3mm screws or self tapping bolts, and one with 3D printed locking pins. I'm using one of each. The base is snap-fit, but…
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Esteban Ocon from Haas . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible item to…
Tankdeckel Halteband Skoda Octavia mit Löchern | Car Tank cap retaining strap
I thought it would look cool on the fridge the hole is for a magnet with dimensions 5mm x 12mm and height 4,1mm - tight hole :)
Abdeckung passend für Steba V50 Sous-Vide Stick. Supports: Ja
I recommend printing it up on its end so it sticks straight up. I didn't need a brim or anything and it came out perfect. Printing this way uses less material, needs less supports, and prints faster.
My Sterilite Step-on WasteBasket Pedal broke a while ago, so i challenged myself to design a replacement part Features Printable on a Prusa Mini Print Instructions Nozzle diameter : 0.40mm Filament : PLA (for rigidity) Perimeters : 3…
This is a spiral/vase mode design for a wastebasket that I've found to be a good size next to a 3D printer. I've used 0.8mm and 1.2mm nozzles for these. The orange one with a 0.8 nozzle and a 1.0mm line thickness. The translucent green…
This is a simple wall mount for a Steba SV 50 Sous Vide device. I designed this to go into my kitchen cupboard. It could potentially fit other similar devices, but I don´t know. I created a small hump on the backside to better suit the…
Two brackets to screw the Steffen STEBA iQ to a table. The original solution is only made with tape and doesn't hold at all. Printed with Prusa Mini. Print time per piece around 1h. Mounting screws: 4 x ST3.5x19
Top piece for using the "Steba ED4 Dehydrator" as a Filament Dryer. With this you dont have to use the original trays, and they can still be used for food. 2 versions, with room for 1 or 2 spools. I bought my ED4 for around 38usd. 1x…
English available below Einfacher Halter für Mülltütenrollen zum zusammenstecken. Zur Auswahl stehen zwei Seitenteile und zwei Halter. Der hohe Halter (holder high edge.stl) sollte verwendet werden, wenn man den Halter an einer Schranktür…
Remixed Speedy Funnel 2015 by 3Dstreaming to fit my Piteba oil press. It fits loosely so I can rock the funnel to keep it flowing. If you want it more snug increasing the size by a few percent should do it. Printed with PETG. The funnel…
EN 30% to 300% 'scalable' basket Can be used as a pocket divider, fruit basket... 6 models available in .stl and .3mf. Above 150%, use .3mf. No support for this model 2 perimeters and 3 layers top and bottom with a 10% fill in 3D…
This mini desktop wastebasket features a simple, easy-to-print design. You can combine it with the trays for added appeal or sturdiness: Assembly video:
This is a simple self holding marker holder for old whiteboards from ikea. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: No Resolution: 0,2mm Infill: 10% Filament: Redline PLA Blue Category: Organization
I was fed-up with the mess in my kitchen cabinet where we kept our tea boxes. We could not find anything, and my kids just kept buying more tea (because they could not find anything). I searched various 3D prints for a solution but…
Recommended to print cap at 97%-98% to fit the main body without struggle, as model was made with little to no tolerance.
Waffle maker lock repair Steba WE 20 WHITE
materiale da usare PETG riempimento al 15% con 3 pareti laterali ugello da 0,4 mm spessore 0.2 per strato fare supporti.
Overview This is a modular, 80mm extension riser designed specifically for the Steba ED 5 Electronic Dehydrator. It expands the vertical capacity of the machine, allowing you to easily fit standard 1kg 3D printer filament spools inside…
The Steba ED8 works great as a filament dryer on its own. The discs have a detachable middle piece, which are wide enough for 1 kg filament spools. This model is for holding the spools in-place while they are drying, as they can move…
0.2mm layer height Best is to use black and white
Da die Schnurklemmen von Teba Jalousien leicht brechen, habe ich mir Ersatz designed, der (m.E.) besser funktioniert als das Original. PETG oder TPU empfohlen.
Made this leg for a Steba KB electric oven for replacement
Am besten flach liegend, mit Stützstrukturen drucken.
Deutsch Mennekes 10828 – Ersatz-Halteband Da das original Halteband des Mennekes 10828 Steckers leider nicht einzeln als Ersatzteil erhältlich ist und ein abgerissener Deckel schnell zu verschmutzten Kontakten führt, habe ich dieses…
Deutsch Mennekes 17021 – Ersatz-Halteband Da das originale Halteband der Mennekes 17021 Steckvorrichtung nicht einzeln als Ersatzteil erhältlich ist und ein verlorener Deckel zu verschmutzten Kontakten führt, habe ich dieses passende…
Adorable little bat lamp, fun to paint and personalise with your own favourite colours! 🦇 3D printed in PETG with a 0.2 mm layer height.
Deutsch Mennekes 17038 – Ersatz-Halteband (Aggregat-Steckdose) Da das originale Halteband der Mennekes 17038 (in meinem Fall verbaut in einem Notstrom Aggregat) nicht als einzelnes Ersatzteil erhältlich ist und ein verlorener Deckel zu…
Deutsch Mennekes 10833 – Ersatz-Halteband (Kupplung) Da das originale Halteband der Mennekes 10833 Kupplung leider nicht einzeln als Ersatzteil erhältlich ist und ein abgerissener Deckel schnell zu verschmutzten Kontakten führt, habe ich…
Made this leg for a Steba KB electric oven for replacement
Simple credit card sized slate for white balance in underwater photography. Should obviously be printed in white saltwater resistant filament. I printed it in PETG as no ASA or similar at hand.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Introduction I had always been a fan of the Mateba 2006M. It is one object in the world I'd sell a kidney to own. When the opportunity to own an airsoft model came up, I jumped at the opportunity. I saw フリーダムアート's ( GunFreedomArt )'s…