Counting matching models…
24.12.2025 Update. I printed another part with a different profile setting at 8 perimeter and the print time was reduced by 1 minute. simple printing in 12 minutes print 0,2 mm structural Print PetG full bottom layers 6 print 3* left and…
Protects your Joy-Con sticks from getting drift issues. Simple slide on and pull out. Prevents from tilting and clicking the sticks during travels. Available for Joy-Cons and the Pro-Controller.
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
Protect you KTM rear shock from being worn out by the rear wheel mudguard. I printed it in PETG with 90% and 100% infill. Fit is not 100%, but you should hear it snap when it fits correctly. Lasts probably 10-20h. Maybe more, but I…
Bodenschoner für Festzeltgarnituren mit einer Breite von 30m. Zur Befestigung können Kabelbinder bis zu einer breite von 8mm genutzt werden. Je nach Anforderung kann der Bodenschoner direkt verwendet werden (z.B. um Steinböden zu…
Long protector for the lightning cable. Easy to slide on and off.
The Compact Muon Solenoid (CMS) detector is one of the big four experiments of the Large Hadron Collider (LHC) , the world’s largest and most powerful particle accelerator. The LHC is part of CERN 's accelerator complex in Geneva,…
This is an improved antenna, buttons and display for this Stalker Bear Detector . With these improvements you'll find artifacts in no time! Print instructions The antenna part has quite a lot of thin parts. With FFF 3D printers it may be…
An aternative to the existing Lenovo Legion Go Joystick Protectors
Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No
Universal AB Clip version, remixed from kekerino 's project These are the .stl files for half of a clip of either the 2S, 3S, 4S, 5S, 6S, 7S, or 8S size clips. Both halves of a full clip are the same, and they just snap together on either…
added new Version: 02_Protector-USB_xLCD-MK4 recommended Material: Prusament PETG Jet Black recommended Layer Hight: 0.2mm Supports needed: No additional parts required: No
A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…
Allows for a single place/tool to hold your billiards cue joint protectors while not in use.
Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…
7/21/21 - This is a little mount I created for my radar detector to sit right above the center screen of my Model Y. Not sure how well it will stay put in the vehicle as I have just printed it. I am not responsible if this causes any…
When you fit a high mudguard / fender on the Honda MSX-125 Grom, you expose the lower fork legs by removing the original mudguard which doubles as a protector. You can use the Honda Monkey 125 fork protectors but they are quite expensive…
Couldn't find the right size sieve for metal detecting duties so drew one myself. Printed in 4mm thickness but I feel that 3mm would have been sufficient. Model is quite large, could be scaled 80-90% and still fit an adult hand comfortably.
Easy to install protection for your carsh bars. Fits Harley Davidson TOURING 2024+ I recommend printing with high-temperature materials. Use four wall outlines.
My kids kept destroying the cards when we play Exploding Kittens so I picked up sleeve protectors to help them last longer. On the plus side the cards are in great shape. On the other side, they no longer fit in the tray that comes with…
Easy to install protection for your carsh bars. Fits Harley Davidson TOURING 2024+ I recommend printing with high-temperature materials. Use four wall outlines.
This is a remix of Supavitax's Cable Protector. I redrew it in Onshape to add the catch so it will lock into place. Printing Flange on build plate Filament - PLA, PETG Infill - 15% is good Layer Height - .25mm Supports - Small supports…
My mum bought some heavy duty (~40kg) shelving units form Costco for her pantry. These are Whalen branded- see the photos for the box design. The pantry floor is linoleum so if the vertical columns of were placed directly on the floor the…
Another iteration on already stellar designs, just some small tweaks to embed the 6x2mm round magnets into the print with a pause at layer 17 to place the magnets when printing.
remix for better fit of usb c in SpeedyBee f405 v4 FC
This is built around standard outdoor North American outlets and is meantmeant to protect the outlets from excessive damage from the elements. The screw holes are 0.9cm in diameter. IfIf you have any questions or concerns, please feel…
The ultimate protective cap for the Fein Multimaster sanding pads. Easy to put on and effectively protects the Velcro fastener of the sanding pads during storage. There is one model for the thick sanding pads and one for the thin ones.…
Pickup connection between the handle shaft and the search coil. Fits on Jago Metal Detector MTSG01 Coil height: 18mm Coil inner circle diameter: 89mm Print Infill Density: 100% Not included: Bolt and nut M10x45 - DIN 933
Prusa MK2 MK3 Watch Dog Smoke Detector Fire Saftey Device R3 detects small smoke and cuts down power to prevent fire, sends you push notification over WIFI / internet . ATTENTION: HIGH VOLTAGE, DANGER 220V ! Make only if you are confident…
Print a new belt buckle for your GRIP6 belt strap. Being plastic, it can travel with you and go through metal detectors. Printing the belt buckle with its iconic curve would require support and show horrible layer lines. Instead, I…
Many cities are frequently burglarized. Often, the burglars are not afraid to break a window. At my home has already been broken into twice, in my job I often have to deal with burglaries and have made the experience that burglars are…
remix of @CodeFuPanda_807351 design to fit the UV5R properly.
This print protects the threads of your lathe spindle when you are using accessories mounted in the MT3 spindle bore. This is for a 9x20 lathe (or any other lathe) with an M39 x 4mm spindle thread. I also included a test print piece which…
These are the enclosure and 3D printed parts for my CO2 detector project. If you would like to build your own CO2 detector, the full assembly instructions are on instructables here . The circuit python code for the CO2 detector can be…
We build a simple CO2 detector that measures the CO2 content of the air and gives signals as soon as certain values are exceeded. Assembly manual You can see the instruction how to build this on our wiki:…
Print in something non-brittle (that means: no PLA) and slip two o-rings into the grooves near the edge, like in the photo. Stick on your pole tips to keep them from scratching your stuff during transport.
A vertical mount for a cheap tuya zigbee or wifi PIR (passive infrared)/mmWave motion presence sensor I found on AliExpress that is compatible with the IKEA SKADIS pegboard system. I printed it vertically with tree supports for the hooks.…
The clip on my Escort 360 MAX suction cup mount broke, so I designed this replacement. Printed in ABS and worked well. Design (contour) is slightly different than original, as I was still learning to use Fusion 360, and did not spend the…
Enhance your workspace organization with this meticulously designed surge protector mount. Tailored for the SPN7080 series, this mount offers a seamless solution to keep your power strip securely fastened under your desk, ensuring a…
I love using my Tiles, but their buttons drive me crazy! Even if you disable the “Find Your Phone” option in the app, pressing the button can still cause the Tile to chirp for about ten seconds. Furthermore, the buttons are incredibly…
Bolt protector and decocker for Schultz & Larsen Victory. Suggest printing in a color that is highly visible, especially in forest or similar areas. Suggest printing in a material that is less brittle. I printed mine in the photo with…
a simple wall mounted hook with two hooks and inset screw holes. prints great on its back, needs supports that way but not much. havent tried it but i imagine printing on a raft you could print it upright without supports
This is a remix of the original “Prusa Core One USB Support and Protector” by @cpunut_1794213. The original design uses six round magnets. In this version, I redesigned the internal cavities to accommodate two rectangular magnets (20 x 8…
The model can be employed for the detection of resonance noise in the XY plane. Utilize the model to conduct experiments aimed at reducing resonance noise. Additionally, consider adjusting the printing speed, as higher speeds may…
Children's bumper protector. Round "ball" design to completely cover the furniture corner. Update 1: Added 90° degree corner element Size is for a board with 16mm width. Printing support is required. PLA, PETG, etc
Pin protector for Flipper Zero WiFi Dev board - for specific case, all others didn't fit.
These little printable clips are cast iron pot protectors, similar to what some brands of cast iron cookware, such as Lodge, provide when you purchase their products. I modeled these pot protectors to fit our Lodge dutch oven as we had…
Plant Cover Protector This was a cylinder made in Tinkercad and printed on an Ender-3 S1 in vase mode with no bottom layers. Measures 200mm X 200mm X 250mm. With brim in Cura slicer.
This pocket protector is designed for use in a lab coat, where small objects like pens and screwdrivers can fall out of a pocket causing contamination of the workspace or damage to equipment. Or, items in the pocket can poke holes or leak…
Jelikož ochranný roh je ze silikonu a nedrží na něm oboustranná lepící páska a spadává ze stolu, vyrobil jsem podložku, kterou jsem přilepil vteřinovým lepidlem na ochranný roh a teprve podložku až oboustrannou lepící páskou. Nyní drží…
Use M4x12mm (or shorter) self tapping screws to mount the smoke detector to this holder piece. After printing and mounting test that it does not block the XYZ calibration!
I was in the middle of the Prusa V2 enclosure build and realized that a giant smoke detector on the back of it (see pic) was going to make me feel like human garbage. So I explored around for a better solution. In the U.S., we have these…
Print the top in TPU or other soft filaments so that it is squishy and slid the top into the base, which hides the screws used to fix to the wall.
Xeltek Superpro 7500 7500N Socket Protector. I used PLA with prusa MK3S+ default settings but you can use the filament of your choice. Details On My Personal Blog https://www.stevenrhine.com/?p=131304 Facebook Xeltek User Group.…
EN: Protection of photovoltaic cables with a diameter of 6-7 mm against penetration or breakage when routed through wall edges, metal roofing, etc. I recommend printing with supports in vertical position. CZ: Ochrana fotovoltaických…
This is a protective Orca Torch battery case I designed to prevent spare batteries from touching each other and causing when traveling by airplane. It fits the D530 and D530V flashlight batteries. I printed it with PETG but I'm sure other…
I designed a simple cover for NICE motion detector installed for my entrance gate.
A simple stand for my Canberra / Bicron 5H5. Designed with a 5 cm high sample chamber
Quick Cord protector to prevent power cord chaffing on Ace Hardware Model 2000 garbage disposal. This may fit other things, but no guarantees. Note: This is NOT UL, ETL, NETL, ISO, etc. listed. Some particulars: Cord: 3 strand 16 gauge…
Do not print with Beskar fiber filament. It is far too heavy for the Nextruder to handle. Instead use something very light yet somewhat flexible. This print is with some cheap 8% Carbon filled PLA I got Amazon for about $30/kg and it fits…
The FeiyuTech WG2X gimbal's power/mode button is easily pressed if transported not in a purpose built case. It can also be easily depressed while in operation. This model adds a ring around this button making it recessed and much less…
The AMD processors come in a thin plastic carrier that was originally packaged inside a larger cardboard container that also holds the Wraith fan. However the CPUs are often sold without the fan, and the plastic isn't safe to mail without…
Not made by me just noticed there wasn't an option for these on Printables yet and I have been using these for years now with no issues and my Index lenses have zero scratches because of them. Simply slide them over your lenses and they…
It’s likely that the print will need to be slightly trimmed with a knife to adjust the protrusions, so the leg cap fits securely inside the chair leg. Each chair leg may have slightly different dimensions.It’s likely that the print will…
(French follows) Lenz was the creator of this diode bridge for detecting the presence of trains on the rails. This home made model features both a case and a soldering aid for the 5 1N4001 diodes. The case is designed to be screwed…
BMW G310 R /GS Handlebar antiscratch Protector. Print, click in hole in the handlebar and you won't scratch color from your metal handlebar anymore. Printing: 2 perimeters, 20% infill, 0.20 mm layer height. Use PET-G.
Welcome, and thank you for choosing my model. I will provide some context for this model. This is a specially designed protector for a set square. I made it because my set squares often got small dents and damage over time, even when I…
Knob to replace the battery cap and switch on the Greenlee GT-11 Voltage Detector. The original conductive plate is retained from the original cap, and the pegs can be slightly melted with a hot rod or something similar to seal the plate…
I made this blade protector for my Stanley Junior Hacksaw because I kept carrying it to university and it was always awkward to store safely in a bag or toolbox. I was constantly improvising temporary covers for the blade, so I decided to…
I love Apple products, but the cable of the MagSafe2 AC adapter is a problem because it quickly becomes frayed. Since Apple does not consider improving it, I made the MagSafe2 AC adapter neck protector. Print Settings: Material: PETG…
When your printer is running 24 hrs. in your house you have to feel more comfortable with a Fire Protection unit next to it. This is a bracket for the WHAM BAM Fire pug. I was watching the tests and was very impressed. I hope I never see…
Very simple model. Printed with glow-in-the-dark PETG for flexibility and visibility. Snug fit that does not fall off, so no further retainers are necessary. Practical for outdoor operations, only around 6-7g extra weight.
a basic corner protector for the sharp edges of a shelf
La languette figurant sur certaines photos a été supprimée dans le modèle car elle n'était pas efficace. Pour limiter le champ de détection il vaut mieux mettre un ruban adhésif opaque directement sur le détecteur.…
Since all the dividers on my garden chairs were broken, it was no longer possible to stack the chairs properly causing them to rub on each other. This caused the powder coating to peel off. However this part has a slightly larger opening…
Description A very simple design. If you carry multiple interchangeable adapters for your disc retriever/telescopic pole, and just throw them in your bag, use these caps to protect the bag's fabric from ripping. Fits M5 screws on the…
Remixed for 20 x 6 x 1.5 mm rectangular magnets. Same instructions as the original: Press-fit should be sufficient, but a drop of glue can be used if needed Print Settings: Material: PLA / PETG Layer height: 0.2 mm Infill: 15–25% No…
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
These accessories prevent dust or pieces of filament from getting stuck in the Z axis and under the side covers. The shoulders of the PrusaCoreOne_DP_ZAxe.stl files must be directed downwards; they enter the holes in the platform. Two…
I was looking for a silencer and a protective grille for my K1 side fan. There is a wide range on offer here, but any grille in the airflow can increase or decrease the noise. As I didn't want to test everything, I constructed my own. My…
This is an old design and has now been replaced by The SENATE Check out the new design here: https://www.printables.com/model/513350-the-senate-ams-feeder-button-and-protector-for-bam This is a remix of Bambu AMS Feeder PFTE Adapter by…
Beer/Pop Can Opener/Protector SIMPLE PRINTED TWIST CAP USE ON YOUR BEER AND POP CANS TO KEEP NASTY SUMMER CREATURES OUT OF YOUR COLD DRINKS OPENS AND SEAL CANS FITS STANDARD 355M TAB CANS BEER AND SOFT DRINK CANS SHOULD FIT MOST CANS POP…
This is a quick remix. I don't have the cable inserted in the guides (see pic #2) with this cable protector I don't have to. Plus I can slide the protector more easily up when I need to connect the ADXL345 mount.…
Apple Lightning to USB C cable protector for your new cables. Maybe you need setup upside down this model on your slicer. I used raft while printing. You need to slice it so that the narrow edges are perpendicular on the print bed.
Batch 2 styled filament detector mount. It can freely rotate around the pivot and shift the filament line by 28.5mm. Parts have 1 layer sacrificial bridge layer to make it easy to print. For Batch 3 I modified the base. Enjoy it! Any…
This model was provided to me by Creality support to fix the broken pneumatic connector on top of the extruder of the Creality K2 plus . You can also print this to prevent your pneumatic connector from being damaged over time on the top…
The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System Look at me mom, I used another stupid acronym. I was not happy with all the AMS Feeder Protector Button things out there, they all had flaws and strengths, including my own…
Hi, I hope you will enjoy this 3D print. I will be glad if you like my model. I printed this model on Prusa Mini using PrusaSlicer 2.6.0-alpha5. I suggest turning on ironing in the slicer, 15% infill, automatic painting supports and…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
Keep your furniture, walls, and equipment safe with this simple yet effective Corner Protector Guard. Designed to absorb bumps and prevent scratches, it’s ideal for desks, tables, cabinets, or workshop setups. The curved inner shape fits…
This was inspired by one I saw at my parents. Why pay $0.25 for one ($6 for a 24 pack), when I can design and print one for much more? This can print without supports using PLA. I haven't tried using TPU, but that might work even better.…
*****Note: Please read the complete instructions before printing this file. Most likely you will have to print this model at about 100% to 108% scale – so, if you don't measure your printer's dimensions before you print, chances are that…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
This is a protector fan cover to avoid getting the fingers inside by accident. Based on FeNi64 that it has a file of the model but I couldn't open it to print it. No supports need it Donations through Paypal
Since I published this miniature vice with the optional table clamp, it has become very popular. And I have started to use it myself for numerous hobby activities. If you don't have it yet, feel free to get the latest version here:…
