Search results: ten

Sort order

32,384 models

P
PrintablesJanHajn

Belt tension tester

Description: The method of measurement with my tester is similar - it also compares the tension of the belt Gates 2MGT-6 (used in 3D printers such as Prusa MK3 and Prusa MINI or similar) with the tension values recommended by the belt…

Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,178
Likes
2,059
Rating
4.91
P
PrintablesBoogie

X-Axis revision with belt tensioner

I made an X-Axis revision with belt tensioner and bearing clampings. It is inspired by the bear mod x-axis but fits with the normal Prusa extruder. The x-axis is also much stiffer than the original one. Additional holes for m3 screws to…

Print approx. €9.99–€12.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,665
Likes
976
Rating
4.85
P
PrintablesJoe

Print-in-place Automatic Rope Tensioner

Print-In-Place with no additional hardware required, making it's easily scalable up or down . All of the credit for this design should go to the original designer: https://www.printables.com/model/565344-automatic-rope-tensioner I've just…

Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant

Downloads
4,449
Likes
588
Rating
4.78
P
Printables3D KIMBA

Stencil Book: Organize Your Creativity with Ease

After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant

Downloads
3,677
Likes
2,009
Rating
4.93
P
Printableshashizo

Gravity knife fidget toy extended (no screws)

The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…

Print approx. €4.89–€5.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,644
Likes
404
Rating
4.75
P
PrintablesDutchDeveloper

Nintendo switch game cartridge pokeball

This pokeball switch gamecard holder is not only very nice display piece but is aswell very practical! It can hold up to 12 game cartridges. To print yourself one of these fancy pokeballs all you need is a 3d printer (obviously), White ,…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
2,992
Likes
614
Rating
4.89
P
PrintablesTipTop

Dental Floss Holder with Tensioner V2

This design represents a dental floss holder that fixes the main problem of almost all floss holders - tensioning! Floss tends to stretch almost immediately, causing handling problems. My design uses a movable part that serves the…

Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant

Downloads
2,794
Likes
376
Rating
4.71
P
PrintablesTeraflop

Teyleten Robot ESP32-S3-WROOM-1 Case

This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…

Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,669
Likes
172
Rating
4.9
P
Printablesextrablind

Battery Adapter From Parkside X20 to Makita 18v | extended body | Parametric | F3D

[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…

Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant

Downloads
2,465
Likes
185
Rating
4.4

Playstation 5 Joystick/Thumbstick Extender (No Supports!) (PS5)

This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
2,386
Likes
136
Rating
4.7
P
PrintablesTeteomat

Pistachio Bowl | Snack Container with Shell Holder | Modern Design - Contenitore Pistacchi 2 in 1 | Snack Bowl con Porta Gusci | Design Moderno

Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…

Print approx. €3.56–€4.36 excl. taxPreliminary estimate for one variant

Downloads
2,333
Likes
606
Rating
4.84
P
PrintablesAlgernon

Airbrush stencil set - Mandala

Printing: There are no special printing requirements, NO supports . For example I print with 0,25 nozzle, 0,05- 0,07 mm layerheight, 2 perimeters, 20% infill. print max 3-4 layers. … I fix Mandala 01 Happy printing :-)

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
2,275
Likes
430
Rating
5
P
PrintablesKabliga

v2 - Nintendo Switch Cartridge holder/insert

Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! V2 Update info at bottom: I've been wanting to print a case to hold Switch Cartridges anyway, but I decided rather than…

Print approx. €3.19–€3.90 excl. taxPreliminary estimate for one variant

Downloads
2,154
Likes
613
Rating
4.72
P
PrintablesBoogie

Y-axis belt tensioner

Y-axis belt tensioner for standard gt2 20T or toothless idler with 3mm bore --- I released a new version with only two screws --- Fits on Prusa MK3 MK3s MK3s+ Fasteners: 1x M3x20 screw 2x M3x10 screw 3x M3 hex nut 4x M3 Nyloc hex nuts 4x…

Print approx. €2.27–€2.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,988
Likes
490
Rating
4.92
P
PrintablesBossingArt3D
18+

The source marked this model as adult content.

Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant

Downloads
1,965
Likes
521
Rating
4.67
P
Printablesnkitani

Sd.Kfz.2 Kettenkrad

Print details: Material: PLA Recommended layer height: 0.10mm Supports: yes Infill: 15% [Englilsh] https://www.thingiverse.com/thing:2635032 1:12_Kettenkrad model by compon I made a Remix of the following. -No need to paint by using 3…

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant

Downloads
1,731
Likes
241
Rating
5
P
PrintablesRoiku

Nintendo 64 logo

I made the Nintendo 64 logo on SolidWorks. Settings: 10% infill No support Brim ON Instagram : @roiku3d

Print approx. €6.90–€8.43 excl. taxPreliminary estimate for one variant

Downloads
1,730
Likes
527
Rating
5
P
PrintablesBig Dutch

Prusa MK4 LED Status Bar Extension

My printers sit on an ikea Kallax shelf which causes the LCD panel to hang over. Since the new MK4 has an awesome LED Status Bar, I did not want to lose out on the feature. Model printed without supports and misses LED and any chips on…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
1,696
Likes
531
Rating
4.95
P
Printables1llia

Table mount - extender - clamp

Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…

Print approx. €6.61–€8.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,695
Likes
1,323
Rating
4.5
P
PrintablesVerender

Tension Belt/Ratchet Strap Winder (Spanngurt Wickler)

Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…

Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,566
Likes
581
Rating
4.88
P
PrintablesUlbisch

Mini Bag Clip (Mini-Tütenverschluss) - one size fits all

Object description: It is a very light weight and compact bag clip that allows easy and reliable (re)closing of a wide variety of bag types and sizes. While using it for freezer bag closure it blocks only few space in your freezer. PETG…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,557
Likes
293
Rating
4.87
P
PrintablesJacob Desforges

Nintendo Switch Horizontal Dock Foot

My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…

Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant

Downloads
1,528
Likes
313
Rating
4.98
P
PrintablesPrintaUser

Tiny Toy Blaster V2 (6mm Airsoft Toy Gun) No Glue, No Fasteners: Just Rubber Bands and Prints

Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…

Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant

Downloads
1,519
Likes
193
Rating
4.64
P
PrintablesGart Hondo

Tennis Racket/Racquet Keychain & Ornament

Serve up some fun this holiday season with a tennis racket ornament! I think this racket looks relatively generic, but was based on the based on the Babolat Pure Drive if you're wondering. Could alternatively be used as a keychain. No…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
1,406
Likes
90
Rating
4.92
P
PrintablesEscape

Belt tensioner for Elegoo Neptune 2 and 2S for the x-axis

This is a belt tensioner for the x-axis of the Neptune 2 and 2S from Elegoo. Since the geometry and the structure of the X-axis differ greatly from the Ender, the complete body had to be rebuilt. Since the source data is not available, I…

Print approx. €18.08–€22.10 excl. taxPreliminary estimate for one variant

Downloads
1,362
Likes
103
Rating
4.85
P
PrintablesŠtěpán

Prusa Mini USB extender

Extension for the USB plug. Specifically designed to fit this 90° cable ( UP -USB 3.0 Male to Female variant, see the picture), but will probably work with other similar cables too ( like this one ). You don't need any additional…

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant

Downloads
1,352
Likes
292
Rating
4.93
P
PrintablesAlgernon

Airbrush stencil ST-AIR001-weathered-paint-1.48-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
1,329
Likes
200
Rating
5
P
Printablesgreenribbit

Hair Straightener Holder

I always forget to put my hair straightener away while I wait for it to cool down. Plus I wanted to have it always handy but not creating clutter. So I designed this wall mount! Hope you find it useful as well!

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant

Downloads
1,265
Likes
189
Rating
5

Nintendo Switch Pro Controller Mount - Mounts on Wall or Switch!

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Use this mount to hold your…

Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant

Downloads
1,163
Likes
170
Rating
4.84
P
PrintablesGreybeard3D

Extended Ear Savers

These are fast and easy to print. I have included a Mk3S gcode for a single and set of 6. The gcode is optimized to print fast... about 16 minutes. I recommend scaling Z to 80% for a more flexible ear saver. I have handed out about 300 of…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
1,153
Likes
30
Rating
4.89
P
PrintablesTom Vít

Bidon for Bike Tools + 🆕 Cap extender

The video on YouTube says it all: https://youtu.be/uFuYvUkHlpI About the Cap expander (short video): https://www.instagram.com/p/CD083fJD9TJ/ Easy printable even on hobby 3D printer, simple to mount, universal for almost every bike basket…

Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant

Downloads
1,139
Likes
364
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-TX007-wood-texture-num2-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant

Downloads
1,117
Likes
248
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-TX001-cracked-wall-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
1,115
Likes
225
Rating
5
P
Printablestsukworks

Late Model KTM/HQV/GG Chain Tension tool

This tool is handy for quickly setting the tension on late model KTM/Husqvarna/Gas Gas 125-501 dirt bikes that has a specified slack of 55-58mm, measured between the top of the swing arm and the bottom of the chain. Note: this has only…

Print approx. €0.90–€1.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,111
Likes
116
Rating
5
P
Printablesdodecadron

Nintendo Joycon Storage and Transport Case

Update 2024-07 : I added some variations of the model with slightly wider tolerances as for some people the default version was too tight. The notch that holds the joycon is 0.1/0.2 mm thinner in these versions. I also added a file with…

Print approx. €5.55–€6.78 excl. taxPreliminary estimate for one variant

Downloads
1,081
Likes
220
Rating
4.75
P
PrintablesPrusa Research

Mask strap extender

The Mask strap extender helps reduce the pain and pressure of wearing a mask for a long time. Fits every mask and head size. Challenge: Help others around you - print the mask strap extender (ear saver) for them. Especially doctors,…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
1,079
Likes
91
Rating
5
P
PrintablesPresswerk65

Stencil template Dinosaurs

Stencil for drawing with dinausaurs

Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant

Downloads
1,065
Likes
202
Rating
5
P
PrintablesTrocheHole

GT2 Belt Fastener

A reusable fastener without damaging the GT2/2GT (width: 6mm) timing belts.

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
1,030
Likes
208
Rating
4.92
P
PrintablesMrHanjak

Doctor Who - Sonic Screwdriver 9-10th Doctor (The Ninth/The Tenth Doctor's) 2005 (NO SUPPORTS)

🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
1,005
Likes
280
Rating
4.8
P
PrintablesVC Design

Coat Hanger Extender Hook

Use the text tool in Prusaslicer to customize your signs :)

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
963
Likes
494
Rating
4.63
P
PrintablesLine Arc Line

Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]

This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…

Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant

Downloads
962
Likes
173
Rating
4.77
P
PrintablesY Ibrahim

Print-in-place Rotary Fidget Detent Knob with detent strength options

This fidget clicker is a neat little gadget showcasing the power of print-in-place mechanisms. Choose between three detent strength options. Simply print the desired model, break it free from the bed and with minimal cleaning up, its…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant

Downloads
948
Likes
67
Rating
4.67

Prusa MK3.5/MK3.9/MK4 centre tray/cable tidy (now works with Y belt tensioners and Prusa enclosure)

To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…

Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant

Downloads
942
Likes
312
Rating
4.81
P
Printablestur_bo_des_ign

Dosen Insektenschutz - Can insect protection - Wasp protection - Can Protection - Dosenverschluss - insect screen - wasp protection - wasp screen - mosquito protection

Dosen Insektenschutz - Can insect protection - Wasp protection - Can Protection - Dosenverschluss - insect screen - wasp

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
936
Likes
42
Rating
4.5
P
PrintablesMaYo

Cigarette holder with activ carbon filter - Zigarettenspitze

ENGLISH Cigarette holder with activated carbon filter If you like it, leave a like please Length: 80.5mm Diameter: 13.6mm Version 1: Suitable for cigarettes with a diameter of 7.6mm to 8.5mm (v1) Version 2: holder cigarette v2 6,6-8,4mm…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
881
Likes
87
Rating
5
P
PrintablesHow._.

Number Stencil

Hello, Recently had to make some marking on print sheets for easier identification and printed what's available on Printables after all most solutions are a search away. After using the stencil had some ideal implementations of my own and…

Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant

Downloads
851
Likes
179
Rating
4.67
P
PrintablesA3B

Prusa MMU2S thumbscrews for idler tensioning

This is a remix of the MMU2 thumbscrews for the MMU2 S . The longer thumbscrew should avoid accidentially pushing buttons on the MMU2S. If you already printed the short/original, you just have to replace the left thumbscrew, because there…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
841
Likes
129
Rating
4.97
P
PrintablesmoWerk

Hose Coupler | Water Line Extender | Zip Tie Tubing Repair Connector

Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
836
Likes
339
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-CAM002-luftwaffe-WWII-spots-camo-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant

Downloads
822
Likes
134
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-CAM001-luftwaffe-WWII-shingles-camo-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant

Downloads
813
Likes
157
Rating
5
P
PrintablesMW

X-axis upgrade with linear rail, belt tensioner and bearing clamping - Prusa MK3 / MK3s / MK3s+

If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
794
Likes
247
Rating
5
P
PrintablesJoppe

Modified Nintendo Switch Joy-con grip (remixed)

Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
785
Likes
90
Rating
4.64
P
PrintablesLV3D

MK3 / MK3S / MK3S+ X idler with tensioner

Do you like stock design and don't like stock tensioner? Here is solution. Parts: -Stock idler sourced from Prusa Research -Compatible shaft is Ø2.9-2.99mm, 15-16mm in length. -2x M3 nylon hex nut -2x M3x18 Socket head screew Print…

Print approx. €2.86–€3.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
769
Likes
102
Rating
4.91
P
PrintablesAlgernon

Airbrush stencil ST-TX003-splash-stains-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant

Downloads
754
Likes
155
Rating
5

Tendedero caravana / Caravan clothesline

Tendedero Caravana Tendedero que se inserta en el rail de la caravana, autocaravana o camper. Simplemente con ponerle una cuerda tienes un tendedero para cuando no tienes un árbol cerca. Impreso en Petg. Al 20%, menos la guia que tiene el…

Print approx. €11.51–€14.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
734
Likes
151
Rating
5
P
PrintablesJernejP.

GoPro arm extender - straight - 25mm, 50mm, 100mm

GoPro arm extender - straight - 25mm, 50mm, 100mm

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant

Downloads
732
Likes
82
Rating
4.86
P
Printablesjbennet-t

NASA Astronaut/Space Suit Patent Art

2D plate / wall display for the astronaut space suit patent by NASA from 1973. Reflects designs from the later Apollo missions (15-17) as well as the Skylab suit. Inspired by Ken Mills' patent art 2D plates (…

Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant

Downloads
710
Likes
364
Rating
4.78
P
PrintablesSwiftyTheFox

Guy Wire System for Spiderbeam Mast with Rope Tensioners / Winders

This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…

Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
702
Likes
94
Rating
5
P
PrintablesAndrej

Rope Manager for grow tent

If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl a simple and practical rope manager - hex holes inside can be used for my…

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
690
Likes
150
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-SF005-radioactivity-signs-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant

Downloads
651
Likes
174
Rating
5
P
Printablescmbarrs1

A weather tight box for extension cord connections.

A weather tight (not waterproof or dust tight) box for extension cord ends. Has basic locking tabs to keep the cover attached. Fits a medium duty US extension coord but can be scaled up if it needs to fit a larger plug. Due to its outside…

Print approx. €3.54–€4.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
611
Likes
108
Rating
5
P
Printablessquinn

Proportional Letter, Number, and Symbol Stencils

A full set of letters, numbers, and common symbols in the form of quickly printable stencils, which have been carefully proportioned for easy typographic layout (i.e. each letter's stencil has a unique width/aspect ratio so that they can…

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant

Downloads
603
Likes
156
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-SF002-circle-textures-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant

Downloads
600
Likes
132
Rating
5
P
PrintablesRobertusMaximus

Freight Ten Cargo Transport - Model Science Fiction

This is the “Freight Ten” as inspired by my four “Mongruxx” Novels. It includes the articulated version. It can be printed as a stand-alone Freight Ten, or with the powered tailor. For all of you Sci Fy tread heads out there. Transport…

Print approx. €11.12–€13.59 excl. taxPreliminary estimate for one variant

Downloads
578
Likes
112
Rating
0
P
PrintablesFélix

Tennis racket wall mount v2

This is version 2 of the tennis racket wall mount, made of 2 parts so that the mounting mechanism is hidden and there are no visible screws. It still holds 3 rackets but only uses 2 screws. Note: I wanted to make a nicer design with no…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
556
Likes
67
Rating
5
P
PrintablesDrakein3D

Professional Mobile UX UI Prototyping Stencil

By day I'm the CTO at a big-name media company and I wanted to design a tool I'd actually have my own designers use for quickly mocking up their app and mobile web ideas. This template is scaled to the size of current “large” smartphones,…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
556
Likes
223
Rating
5
P
PrintablesPeter Farell

Persistence of Time Salvador Dali

Persistence of Time Salvador Dali There some little hairs sticking up out of the dead animal. Just noticed them. I will clean them up soon.

Print approx. €16.21–€19.82 excl. taxPreliminary estimate for one variant

Downloads
552
Likes
194
Rating
5
P
PrintablesStefan R

Tütenhalter / Container for Soups

Mein Ziele bei diesem Modell waren: Ordnung im Küchenschrank Stabil Sparsam im Filamentverbrauch Schneller Druck Da nur Tüten in diese Box kommen, braucht der Boden nicht durchgängig zu sein, das spart Filament und beschleunigt den Druck.…

Print approx. €4.72–€5.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
548
Likes
68
Rating
5
P
PrintablesAdam Kimmerly

Elecraft AX1 / AX2 Antenna Bipod Clip & Knob

The stock Elecraft AX1 and AX2 clip for the bipod is very stiff, difficult to attach, and hard to remove. At the request of a fellow op, I designed a better one. Here it is. Print in PETG for flexibility and durability. Print the clip…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
532
Likes
63
Rating
5
P
Printables3dloh

Gartenschlauchadapter M24 auf 3/4 Zoll

Adapter vom Perlator M24 Gewinde auf ¾ Zoll Anschluss. Mit diesem Adapter kann ein Gartenschlauch an einen normalen Wasserhahn angeschlossen werden. Druck aufrecht auf M24 stellen, keine Stützen erforderlich. Perlator Tool:…

Print approx. €1.04–€1.28 excl. taxPreliminary estimate for one variant

Downloads
531
Likes
42
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-AIR004-USAF-marks-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant

Downloads
529
Likes
114
Rating
0
P
Printablesoanstein

Extension for TowerGarden (Hydroponic System)

Accessories for the TowerGarden – towergarden(dot)com Instead of the two upper floors of herbs, you now have 8 more normal places at half height. Requires 12xM4 12mm screws and matching nuts Only chemically inert and food-safe materials…

Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
526
Likes
81
Rating
4
P
PrintablesAlgernon

Airbrush stencil ST-AFV001-Assorted-german-WWII-tank-marks-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant

Downloads
513
Likes
74
Rating
0
P
PrintablesAlgernon

Airbrush stencil ST-CAM004-pixelated-modern-camo-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant

Downloads
503
Likes
121
Rating
5
P
PrintablesDominik

Delonghi Eletta Explore Coffee Bean Extension

Extension for the Delonghi Eletta Explore. The extension has small hooks and thus holds securely. However, I recommend an additional extra attachment with tape (no one wants to pick up all the beans from the floor ;) ). No support…

Print approx. €5.34–€6.52 excl. taxPreliminary estimate for one variant

Downloads
491
Likes
39
Rating
5
P
Printables3D KIMBA

NPT Pipe Plugs & Testers: Essential Protection for Pipes During Maintenance

NPT Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for BSPP Pipe Plugs? You can find them HERE! Product Description: These NPT pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…

Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant

Downloads
482
Likes
141
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-TX005-paint-stains-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant

Downloads
462
Likes
117
Rating
5
P
Printableschubbs8697

Ford F-150 Gearshift Detent for 2009-2014 F-150s with Floor Shifter / Console Shifter

This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
457
Likes
16
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-SF003-distorted-honeycomb-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant

Downloads
441
Likes
112
Rating
4.75
P
PrintablesAinon3Dtisk

Extendable, retractable, collapsing long sword

Hello, Welcome to my profile, full of models and miniatures :-) I have an Extendable, retractable, collapsing long sword for you. The individual parts fit together perfectly and it is very well thought out and so you can even play with…

Print approx. €20.05–€24.51 excl. taxPreliminary estimate for one variant

Downloads
436
Likes
49
Rating
0
P
Printablesf1nsr

The same CLAMP for 3 dimensions of yagi antenna elements and 2 dimensions of square boom.

Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…

Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
427
Likes
26
Rating
5
P
PrintablesAdam Kimmerly

Arrow Shaft Yagi Antenna Bracket

This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
409
Likes
45
Rating
0
P
PrintablesJan V.

Customizable guitar finger pick - ring pick v2/Kytarový prsten v2

My previous model was a bit rough and kind of bad on the back stroke. This one is made to be more print friendly. The size of the ring is 53 (EU size; inner diameter 16,9mm). I post 2 models. One is what I use. The other one is mentioned…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
400
Likes
33
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-TX002-tyre-marks-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant

Downloads
397
Likes
96
Rating
0
P
PrintablesJan V.

Guitar finger pick - ring pick/Kytarový prsten

I didn't find any guitar rings anywhere. So here is my design. 100% scale is size 50 (EU ring size). Scale as you need. I found out it is better to print flat on the tip. Does not scrape strings. Print with supports on the pad for better…

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
390
Likes
27
Rating
0
P
PrintablesOT

Z - Riemen Spanner "belt tensioner"

Einfach ein oder zwei dieser Räder zwischen den oberen Koppelriemen der Z Achse klemmen. Die Riemenspannung kann durch außermittigen Versatz erhöht werden. Das Riemenrad bleibt automatisch in Position und ist wartungsfrei.

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
384
Likes
33
Rating
5
P
PrintablesBayerwald

Stihl Motorsägenhalter / Kettensägenhalter Wandhalterung

Ein Model zum Aufhängen der Stihl Motorsäge an der Wand Material: PLA Füllung: 15% (Gyroid) Schichtdicke: 0,2mm Getestet bei der Stihl MS 171, MS 241, MS 661

Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant

Downloads
367
Likes
23
Rating
4.67
P
PrintablesRobertusMaximus

Super Freight Ten - Model Science Fiction

This is the “Super Freight Ten” as inspired by my four “Mongruxx” Novels. It is specifically in Mongruxx: Until We Cross This Bridge Again. For all of you Sci Fy tread heads out there. Transport your Armoured Shelter…

Print approx. €4.84–€5.92 excl. taxPreliminary estimate for one variant

Downloads
367
Likes
74
Rating
0
P
PrintablesAlgernon

Airbrush stencil ST-SF004-digital-numbers-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant

Downloads
350
Likes
101
Rating
5
P
PrintablesMichaelQ

Stromer Mudguard Extension V9 - ST2, ST3, ST5 and ST7

The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
349
Likes
29
Rating
4.71
P
PrintablesPetra Ollender

6 animals footprint paws template stencil keychain

It’s 1 mm high with additional 0,4mm for the text. You can easily change colours between layers for 2-colour effect. Scale it up as you need on axis X and Y (I don’t recommend scaling down).

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
349
Likes
92
Rating
5
P
PrintablesFilip Honzárek

Makita RT0700 Extended Circual Base

Bigger circual baseplate for Makita RT0700/RT0701 with rotation mark. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25%…

Print approx. €2.22–€2.72 excl. taxPreliminary estimate for one variant

Downloads
344
Likes
73
Rating
0
P
PrintablesPeter Farell

Little Green Army Men : Military Tent

Little Green Army Men : Military Tent

Print approx. €13.56–€16.58 excl. taxPreliminary estimate for one variant

Downloads
337
Likes
35
Rating
0
P
PrintablesRetalia

Stencil for Music Sheet

You just had an unexpected inspiration of an extraordinary music composition but you musical staff paper ran out! No worries. This small stencil , a pen , a ruler and a piece of paper makes drawing your own a breeze. Printing: Print with…

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant

Downloads
335
Likes
135
Rating
4.4
P
Printablesdjedje_zr7

Service Key (elevator, maintenance room, electricalbox, fireman ladder)

Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
334
Likes
61
Rating
4.5
P
PrintablesLudi

Tablettenbox 90x26mm wöchentlich / Pill Box weekly

Tablettenbox für die ganze Woche mit jeweils einem Fach pro Tag, die Box hat einen Durchmesser von 90mm und ist 26mm hoch. Die Box ist mit Magneten 3x2mm versehen https://www.amazon.de/dp/B00TACKU0O Die Box ist komplett mit Magneten…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant

Downloads
321
Likes
34
Rating
5
P
Printablesbeerwema

Trimmer to potentiometer adapter/Trimmer with turning knob

Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
321
Likes
32
Rating
5
P
PrintablesPirateSands2

Tented Corne Keyboard Case

A case for the 6 column corne keyboard, with various tent (4° to 12°) and tilt (-8° to +8°) angles, as well as a flat version. Tested to fit a v2.0 Cherry PCB (pictured), although I believe it should fit a v3.0. The pictures show the 8°…

Print approx. €11.87–€14.50 excl. taxPreliminary estimate for one variant

Downloads
319
Likes
54
Rating
0
P
PrintablesE3De

Peony Stencil Template

Template with a peony motif. Can be used for pencil drawing, airbrush or sponge powder paint. The pattern is suitable for wall, greeting cards, textiles and other decorations. Printing from PLA, without supports, layer height 0.2 mm.…

Print approx. €4.90–€5.99 excl. taxPreliminary estimate for one variant

Downloads
311
Likes
102
Rating
0
P
PrintablesYG O

Elegoo Centuri Carbon hotend USC-B problem fix

The usb-c hotend cable of the Elegoo CC if know to fail. Mine did. So I route a TB-4 cable through the printer and used this piece to secure the plug. This is the first version, and it fits my cable. I'll probably make modifications /…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
306
Likes
55
Rating
0