Search results: tlr

Sort order

Counting matching models…

P
PrintablesChad

TLR 22 5.0 Elite Tower Guards

Tower Guards for the TLR 22 5.0 Elite. I will add a rear guard soon and update the designs with version numbers if needed after some testing. This is designed to be attached with zip ties and I wanted good quality ties so I got “TY24MX…

Downloads
439
Likes
15
Rating
0
P
PrintablesLupo
18+

The source marked this model as adult content.

Downloads
387
Likes
23
Rating
4.5

WALTHER P99 GEN 1 TLR-8 LIGHT RAIL

This is an adapter to attach Streamlight SLR-8 laser sight to a WALTHER P99 AS .40 *** IMPORTANT FOR RESISTANCE*** Print Vertical with front against the printer bed. 100% INFILL Print as a whole , the piece snaps in. Place one rail and…

Downloads
333
Likes
18
Rating
0
P
PrintablesChad

TLR 22x4 Tower Guards

Tower Guards for the TLR 22x4 I will add a rear guard soon and update the designs with version numbers if needed after some testing. This is designed to be attached with zip ties and I wanted good quality ties so I got "TY24MX Thomas &…

Downloads
311
Likes
14
Rating
5
P
PrintablesAustin Lively

P365/TLR7sub "Gaspedal" V2

“Gaspedal” thumb support to aid in recoil control! Now much more streamlined and uses more standard hardware. You can still have this printed in metal for a more robust feel, but since the threads are handled by the inserted nut you can…

Downloads
311
Likes
41
Rating
4
P
PrintablesMaverick0197

Streamlight TLR-1 DumDum

A remix of Lupo's Streamlight TLR-1 Dummy I am also including different rail keys for adjusting the placement on picatinny rails. I have included the original switch as I did not modify that. Hardware: 2x M3x20mm bolt and nut (for clamp)…

Downloads
305
Likes
29
Rating
5
P
Printablesgamewiz11

Holster for M&P 2.0 Compact 4" w/TLR-7A

I needed a holster for my gun. The place I ordered from was taking a really long time, so I took matters into my own hands. This holster still has great retention and I drilled holes in it so I could use an UltiTuck clip. As always, treat…

Downloads
284
Likes
33
Rating
0
P
PrintablesCDavid

Ruger Mark 22/45 MK III, IV TLR Tactical Light and Mantis X picatinny rail

Ruger Mark 22/45 MK III, IV 22lr Bull Barrel, picatinny adapter, for Mantis X or Tactical light. TRL-1, TRL-7,… Designed to fit the Ruger Target pistol with the 22mm diameter bull barrel. Rounded front, to make sliding on of Mantis X…

Downloads
267
Likes
18
Rating
0
P
PrintablesMaverick0197

Streamlight TLR-1 Rail Keys

Rail keys for the Streamlight TLR-1 in several different "sizes" “0” is centered on the hole, each number is the mm offset from that center. Fits an M3 nut in the slot.

Downloads
265
Likes
23
Rating
5
P
PrintablesYeet

Lubistax - TLR instax

Non destructive modification for Lubitel 166B camera to turn it into instant camera. Uses Instax square cartridges. Check notes for each file. Except a few files, all should be printed without supports. Use at least 3 walls and 20%…

Downloads
260
Likes
44
Rating
0
P
PrintablesNiSE

P365/TLR7sub "Gaspedal" V2 - NiSE Remix V4

This is a modified version of Austin Lively's p365 tlr7sub mounts to tight up the mounting and better suit my personal preferences. I settled on this length after trying out a few variances because it's the largest shelf that can be added…

Downloads
250
Likes
22
Rating
0
P
Printableshuman

TLR-7 Sub replacement key 5mm back

a replacement key for TLR-7 Sub to move it about 5mm back to better align the rear buttons with the trigger guard of some 1913 railed pistols

Downloads
214
Likes
3
Rating
0
P
PrintablesNahuel

Yashica Mat (124/124G) TLR Lens Cap - With Logo

Just added a simple logo. Works with mano Yashica TLR cameras (Mat 124 / 124G etc) Category: Electronics

Downloads
201
Likes
21
Rating
4.67
P
PrintablesZodiase

Streamlight TLR-7 Locking Key 1913 style for Sig Sauer P365 XMACRO

None of the locking keys of 1913 style provides a great fit for my Streamlight TLR-7X on my Sig Sauer P365 XMacro. So I made one for myself. If need to deal with real recoil obviously you'd want to print in some durable material. I…

Downloads
196
Likes
15
Rating
5
P

TLR7 SUB KEY

Key for TLR7Sub for the FLEX-FCU Housing (X length)

Downloads
185
Likes
7
Rating
0
P
PrintablesBrianchenito

TLR-1 extended paddle

You're going to probably want to super glue the two parts together, though it isn't strictly necessary.

Downloads
178
Likes
15
Rating
0
P
Printablesmorozgrafix

Mamiya Sekor Rear Lens Cover for 80mm f/2.8, 105mm f/3.5, 135mm f/4.5, 65mm f/3.5 TLR lenses

Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…

Downloads
167
Likes
16
Rating
5
P
PrintablesTadTadd

Hood for Mamiya C220/C330 80mm TLR Lens

This is a lens hood designed to fit the 80mm lens for the Mamiya C220 and C330 family of twin-lens-reflex cameras. The dimensions are roughly worked out from online images of the original metal hood. The diameter of the clamping section…

Downloads
147
Likes
12
Rating
5
P
PrintablesTarz

Holsters for Glock 19 G3 and G4 with or without TLR-6 and Suppressor Height Sights

NOTE: 09/21/2025 G3 and G4 holsters for suppressor height front sights up to 10mm added. This is a pair of open bottoms TPU holsters for the Gen 3 and Gen 4 Glock 19. It will fit pistols both with and without a TLR6 tactical light. It…

Downloads
146
Likes
11
Rating
0

Streamlight TLR-VIR II Keys (1913-1, 1913-2, UNIV-1)

Streamlight doesn't sell these as far as I could see (unlike TLR-1, 3/4, or 7/8 keys) so I cloned them. Now you can replace your keys without buying a new $300 light.

Downloads
143
Likes
13
Rating
0
P
PrintablesMichl

Shutter release cable adapter for various TLR, Nikon and Leica cameras

The adapter makes it possible to fit standart cable releases to various TLR, Leicas and old Nikon cameras. The threads are very fine. Print the adapter at leas with a layer hight of 0,1mm. If you can, print it even finer. The adapter is…

Downloads
132
Likes
12
Rating
5
P
PrintablesTony Guntharp

TLR7 Adapter Key

This is an adapter for the Streamlight TLR7 flashlight, allowing it to be mounted to various devices with proprietary rails. Originally done by T.Rex Arms.

Downloads
132
Likes
5
Rating
0
P
PrintablesLupo

TLR-1 Holster, The" SideWagon" 3DP_ Might be Multi-Pistol

soooooo this is a Modular Holster I designed. I took big inspiration from the OpenSource files of T-Rex Arms SideCar. Should work with many Pistõlas, as long as you have a TLR-1HL light, maybe even O-Light PL2 The “Friction Washer” is not…

Downloads
125
Likes
14
Rating
0
P
PrintablesNimbus X

Streamlight TLR-8 / TLR-7 / Most TLR Series Flashlight Pistol Mount Replacement

For the off chance that you lost or broke your flashlight; here you go! Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 200 Infill: Whatever you feel like Filament: Matterhacker PETG…

Downloads
123
Likes
8
Rating
5
P
PrintablesJoe

Team Losi Racing (TLR) 22x4 1:10 Scale Buggy Wheels

These wheels are based off of the factory wheel dimensions. You will get the best results printing with support (required to get the final lip on the top to be 90 degrees for a good seal on the tire). Select the option to print support…

Downloads
120
Likes
18
Rating
0
P
PrintablesCryptonoid

Streamlight TLR7 HL-X sub Lens Cover

Streamlight TLR-7 HL-X Sub Lens Cover This lens cover is a great accessory for protecting your light while at the range. It helps shield the lens from gunpowder residue, keeping it clean and clear for optimal performance. Printed with…

Downloads
119
Likes
12
Rating
0
P
PrintablesTheSpeedCadR

Tlr-6 Stream-Light

to install, push Tlr-6 into trigger guard. sand Tlr-6 if needed. after you have installed the Tlr-6 on the trigger guard, plug holes on Tlr-6 with 1.75 mm filament to finish the installation. Make sure to check out some of my other designs.

Downloads
105
Likes
8
Rating
0
P
Printablesbriand42956

Streamlight TLR-1HL picatinny rail key

A modification of the TLR1-HL key to bring the light closer to the trigger guard but not bind on the guard. This is similar to the TSW-99 key. I lost most of my keys for this light, so I had to print a replacement. Note: some…

Downloads
98
Likes
7
Rating
5
P
PrintablesChad

TLR Chassis Protectors

These are SVG Files to cut your own chassis protectors for the TLR 22x4, 22 5.0, 22 SCT 3.0 and the Vision Racing 22T-XT Chassis. There is also a TLR key chain because I had to upload a model file of some kind to post these. I am still…

Downloads
97
Likes
5
Rating
0
P
PrintablesBrianchenito

TLR-1 / x300 Compatible Airsoft Glock Slide Locking Holster

A holster that mechanically resembles certain commercially available A utomatic L ocking S lide Holsters. Airsoft only, please do not use this for actual carry! Just buy the real one, please. Compatiblity: This Holster was built around a…

Downloads
96
Likes
18
Rating
0
P
PrintablesSpotmatic

Version 1: Lens cap for TLR with mounted filter, bayonet 1 (Aires reflex, Rolleicord, Rolleiflex, Yashica, Minolta)

Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…

Downloads
95
Likes
11
Rating
0
P
PrintablesWonder Bread

TLR-1 HL dummy for Mantis X10

I modeled this to work with my Sig Xten comp 10mm with a Four Brothers holster, but it works with my Gunfighters Kenai holster as well. it should work with other guns as well. I made this since my holsters tensions off of the light and…

Downloads
90
Likes
7
Rating
2
P
PrintablesNiSE

P365/TLR7sub "Gaspedal" V2 - NiSE Remix Alt Ver

Basically just changed the shape of where your thumb goes to a more standard angled design. Both shorter and longer versions are available.

Downloads
85
Likes
12
Rating
0
P
Printablesrandomyzer

Yashica TLR/Bay 1 Folding Lenscap

I bought this camera a few weeks ago and it came with a metal lenscap but I found it was incredibly difficult to use as it required a lot of force to snap onto the photo lens, so I made a copy of it but changed some things to make it fit…

Downloads
84
Likes
7
Rating
0
P
PrintablesGeddysburg

TLR 22X-4 - 78t/81t Spur Gear Cover

Update 10/26/23: It was brought to my attention that the original design did not fit the 81t spur which is included with the slipper and center diff. I redesigned the cover from the ground up using Fusion360 instead of TinkerCAD and…

Downloads
80
Likes
7
Rating
0
P
PrintablesNiSE
Downloads
75
Likes
3
Rating
0
P
PrintablesChad

TLR 22x4 Sway Bar Case

This was designed to fit two of every sway bar because the front and rear bars are the same. Since tolerances with 3D printing can vary a fair bit you may need to scale parts up or down to get the fitment just right. A little sanding on…

Downloads
74
Likes
5
Rating
0
P
Printables3D_Rob

Gas pedal for TLR 7 Sub

This is a gas pedal for the TLR 7 Sub for a P365 X Macro. I remixed this model to better fit my pistol and the shooting. I extended to shelf so it better fits the frame of X Macro and also lowered the picatinny clamp so the light sits…

Downloads
72
Likes
3
Rating
0
P
Printablesjrsone

TLR 22x4 Elite ProTek fan mount

This fan mount for the Protek RC PTK-2112 fan ( or equivalent ) and TLR 22x4 Elite 4WD buggy makes two key improvements over the stock setup. First, it moves the fan back in the chassis for much improved airflow, as the fan is no longer…

Downloads
64
Likes
3
Rating
0
P
PrintablesGerrisLacustris

Rolleicord II lens cap + parametric TLR lens cap

Hello :) This is a little friction-fit lens cap I designed for my old Rolleicord II (first version with Triotar 3.5 lens, I don't know if it will fit others). It holds mainly on the taking lens and has little legs not to twist away from…

Downloads
57
Likes
5
Rating
0
P
PrintablesChad

TLR 22 SCT 3.0 Laydown Conversion

You will need various longer M3 screws, M3 washers, M3 Lock Nuts, M3 female thumb screws, body mount (LOSB2414), Rear 22T tower with body mounts cut off (TLR234093) and a lay down transmission assembly. There is also a battery strap mount…

Downloads
52
Likes
4
Rating
0
P
PrintablesZedic

Losi XXX-T Battery Strap TLR R/C Stadium Truck Losi Part A3117

Battery Hold Down Strap for Losi XXX-T Stadium Truck. I couldn't find this one so I designed it in FreeCad. I made two different lengths because I don't have a Losi XXX-T. Someone told me the length, but there seems to be some confusion…

Downloads
47
Likes
5
Rating
0
P
PrintablesTarz

Sub-compact Holster with Magazine Pouch for SIG P938, and others, with Streamlite TLR-6

I have remixed the holster so that it has an integral magazine pouch added to it and made some minor adjustments to improve print quality.

Downloads
45
Likes
13
Rating
0
P
Printablesmorozgrafix

Offset Step-Up Ring for Mamiya TLR (C330, C220) lens 80mm/105mm

Slide on offset step-up ring to 58mm thread for Mamiya TLR (C330, C220). Tested on 80mm f/2.8 and 105mm f/3.5 lenses. There is no thread designed for 58mm side, but print surface provides enough friction for a snug fit. Print is done in 2…

Downloads
43
Likes
11
Rating
0
P
Printablesjrsone

TLR 22x4 front gearbox "Bulkhead Savers"

The weak point of the Team Losi Racing 22x4 4WD buggy has always seemed to be the front gearbox/bulkhead, often breaking to leave the shock towers ‘floating’ above, and the repair is not quick during a race event. These simple braces act…

Downloads
41
Likes
0
Rating
0
P
PrintablesGeddysburg

TLR 22X-4 Front Bumper

Broke the stock and the price to replace was 2 bumpers for $7. Print in TPU for a virtually indestructible bumper. For best durability, print in TPU or PETG, although PLA+ has lasted a long time as well. Print in an upright orientation…

Downloads
40
Likes
5
Rating
0
P
PrintablesMadcamper

Streamlight TLR-8 / TLR-7 Rail Extension

Remixed to add 1.5mm to the rail slot to prevent flashlight from sliding forward/backward. Printed in Hatchbox PLA Pro. Fits pretty snug and may require a little force to get it seated.

Downloads
40
Likes
11
Rating
0
P
Printablesjohn switzer
18+

The source marked this model as adult content.

Downloads
37
Likes
17
Rating
0
P
Printables3DGearSupply

Streamlight TLR-VIR II Key for Ruger MK

The stock keys don't allow the VIR to sit close enough to the frame without coming into contact with it. This places it as close as it can be without rubbing and throwing off your zero.

Downloads
36
Likes
7
Rating
0
P

Streamlight TLR-1 HL Lens Cap

This is a Lens Cap for the Streamlight TLR-1 HL This may also fit the Braun - 1000 Lumen Rail Mount LED Light (This cap fits my Braun light, but is slightly loose)

Downloads
35
Likes
1
Rating
0
P
PrintablesTarz

TPU Holster for Sig P938 with TLR-6 Streamlight

A friend's kydex holster was wearing off the finish on his Sig P938 and, having a Streamlight TLR-6 mounted, it was difficult to find a replacement holster. We decided to see what TPU would do, and this is what I came up with. The holster…

Downloads
34
Likes
8
Rating
0
P
PrintablesToDumToNo

Walther PPQ Streamlight TLR Index Key

Previously used the ‘F’ marked index key for a Streamlight TLR-4 on a Walther PPQ, but the light sat too far forward so I decided to make my own. I designed this to utilize both lugs so it is longer than standard keys. Using this key…

Downloads
33
Likes
1
Rating
0
P
PrintablesSpotmatic

Version 2: Lens cap for TLR with mounted filter, bayonet 1 (Aires reflex, Rolleicord, Rolleiflex, Yashica, Minolta)

Version 2 – Lens Cap for TLR (Bayonet 1) with Mounted Filter With this design you can keep your filter on and simply place the lens cap over it to protect your TLR lens. Compatible with TLR Bayonet 1 (Aires Reflex, Rolleicord, Rolleiflex…

Downloads
31
Likes
7
Rating
0
P
Printablesjrsone

TLR 22x4 Shock Tower Guard / Shock Bushing

These TPU pieces are more than just shock tower guards for the TLR 22x4 4WD buggy; they integrate the shock bushings, and the rear ‘fins’ help absorb energy during upside-down impacts in order to help save the rear wing. There are two…

Downloads
29
Likes
8
Rating
0
P
Printablesm.BmD

Remixed Cutlrey Dryer - Double Tray

This is a remixed double tray dryer. Size : 16x9x12cm. OpenSCAD file contains 3 versions. Printed model is the third one. The others are prototypes and are not intended to be printed as is. Look at the print notes below. Print Settings…

Downloads
25
Likes
0
Rating
0
P
Printablesanonxyz

Mini TLR Camera Medium Format

A tiny simplified TLR Camera, a knick knack or a dust collector as I like to call them

Downloads
25
Likes
4
Rating
0
P
PrintablesRik M0RKM

Chuzhao TLR Tripod Mount

This is a camera mount to enable you to put your Chuzhao TLR digital camera onto a tripod. Yes it is silly, yes it is pointless but it does add a bit of extra something to this toy of the camera. to make this mount you will need a 3/8-16…

Downloads
24
Likes
1
Rating
0
P
PrintablesChad

TLR 22x4 & 22 5.0 Thumb Pro Camera Mount

There are two versions of this mount for each car. One if you are using the rear tower guard I designed and one if you are not running a rear tower guard. This part should be solid TPU and everything just mounts with zip ties. You can…

Downloads
18
Likes
2
Rating
0
P
Printablesjrsone

TLR 22x4 TPU front bumper

This TPU front bumper for the Team Losi Racing 22x4 gives some improved shock absorption over the stock plastic piece. Although head-on front collisions with the bumper are somewhat rare, the bumper reapeatedly makes contact with hard…

Downloads
15
Likes
0
Rating
0
P
PrintablesDusty

Mantis X10 TLR-L HL Adapter

Wasn't able to do any reload drills with the Mantis Sensor on the magazine and with out the TLR-1 HL light, the firearm fitted too loosely in the holster. Mount the sensor “forwards” and push it all the way back on the rail and the fake…

Downloads
14
Likes
2
Rating
5
P
PrintablesMcchip123idk

UtlraFlow PowerBox

The main design of this case is to allow high air flow for the framework mainboard Bottom case x1 Top case x1 Case screw x4

Downloads
11
Likes
1
Rating
0
P
Printables63alfred

Minolta AUTOCORD TLR Lens Caps

Used camera, with a remarkable remarkable ROKKOR 75mm, f 3.5 lens, came without case or lens covers from a local camera swap. Alas, I printed some. Thickness of top and bottom caps must be different, bottom lens cap is thinner due to…

Downloads
10
Likes
0
Rating
0
P
PrintablesSubsonicMike

Mamiya Sekor TLR 105mm Lens Cap

A lens cap for the Mamiya Sekor 105mm TLR lens done in the style of the original lens cap. Printed on a textured bed with fuzzy skin on the outside walls. Some supports may be needed for the text on the cap.

Downloads
10
Likes
2
Rating
0
P
PrintablesJames S

TLR22 transmission spacers

Spacers for a common modification to a Losi/TLR TLR22/22T Instructions This is a spacer set for a TLR 22 22T to raise the transmission case by 1mm, as decribed in the Losi racing blog entry…

Downloads
10
Likes
0
Rating
0
P
Printablesdampsock

Streamlight TLR-7/A Lens Cover - REMIXES

Remix of Streamlight TLR-7/A Lens Cover Changes Slit light cover Double slit light cover Scaled down to 99.5% light cover (better fitment) Scaled down to 99.5% slit light cover Scaled down to 99% double slit light cover Category: 3D…

Downloads
8
Likes
3
Rating
0
P
PrintablesN0Rand0mNam3

TLR 1 non Functional Dummy Light

Simple dummy flashlight loosely based off of a TLR 1. Its missing the on/off switch. I could only really test it on the picatinny rail of the ICS Carnotaurus but it should fot most normal pic rails if its a tight fit i would recommend you…

Downloads
8
Likes
3
Rating
0
P
Printablesmikebad

Yamaha VZ250ftlr - Stay Apron 1 60V-42774-00-00

Modeled this part as it's not been available for purchase for a while. Best printed in nylon (The original is PA6-GF30. I used Polymaker PA6-GF Grey). I printed with the front part face down (as oriented in upload) and it was a pretty…

Downloads
7
Likes
2
Rating
0
P
Printables2A Cryto

TTI_Combat TLR-1 HL Key

I found the gap to big for liking with the 1913 key so it needed to be adjusted.

Downloads
6
Likes
0
Rating
0
P
Printablesfixx

TLR7sub holder

Magnetic holder for Streamlight TLR7sub, when it is not in use. I used magnet d10mmx10mm

Downloads
5
Likes
1
Rating
0
P
Printablesdampsock

Streamlight TLR-7/A Lens Cover - REMIXES

Remix of Streamlight TLR-7/A Lens Cover Changes Slit light cover Double slit light cover Scaled down to 99.5% light cover (better fitment) Scaled down to 99.5% slit light cover Scaled down to 99% double slit light cover Category: 3D…

Downloads
5
Likes
0
Rating
0
P
PrintablesGeddysburg

TLR 22X-4 - Battery Strap

This is a simple replacement battery strap for the non-Elite version of the TLR 22X-4 kit. It is intended to be printed out of TPU. The print settings are very important so that it stretches like the OEM rubber strap. Print settings: 1…

Downloads
4
Likes
1
Rating
0
P
PrintablesStaticSignal
18+

The source marked this model as adult content.

Downloads
4
Likes
2
Rating
0
P
Printablesdriplase

2U Right-Stepped Slash & IntlRo Keycap for JIS Layout (Left-Only Input)

This is a 2U Right-Stepped Slash & IntlRo Keycap. Only left side of the key switch activates even if you press the right side of the keycap. This keycap uses OEM profile. I made this keycap because key rollovering with IntlRo didn't work…

Downloads
3
Likes
0
Rating
0
P
PrintablesSubsonicMike

Mamiya TLR Lens Shelves for Skadis system

A set of shelves to store Mamiya TLR Camera Lenses on the Skadis pegboard system Three shelves are included with the focal length of the lens displayed on it. These are for the 55, 105 and 250mm lenses. The 55 and 105mm shelves are…

Downloads
3
Likes
4
Rating
0
P
Printablesjulesvf

Panoramic mask for Lubitel 166U TLR camera

Slots in where the 645 mask would go on the Lubitel 166U and Lomography Lubitel 166+ and allows the user to take up to 24 Xpan ratio panoramic images on a roll of 120 film. [Not usable on other Lubitel models like the original, 2, 166,…

Downloads
3
Likes
0
Rating
0
P
PrintablesdaHIPPO

Streamlight TLR 4 A Key Picatinny Rail Adapter

Streamlight TLR 4 A Key Picatinny Rail Adapter If you need it, you need it.

Downloads
1
Likes
0
Rating
0
P
Printablesrpc64

Streamlight TLR7 switch for JL Billet Reaper RXM

Lets you use streamlight TLR7 family (e.g. hlx) on the JL Billet Reaper RXM (original/compact) chassis. Use the 1913-3 key Mirror the part in your slicer for the right switch Two models available, both work with the holster: The standard…

Downloads
1
Likes
0
Rating
0
P
Printables

UtlraFlow PowerBox

The main design of this case is to allow high air flow for the framework mainboard Bottom case x1 Top case x1 Case screw x4

P
Printables

Chuzhao TLR Tripod Mount

This is a camera mount to enable you to put your Chuzhao TLR digital camera onto a tripod. Yes it is silly, yes it is pointless but it does add a bit of extra something to this toy of the camera. to make this mount you will need a 3/8-16…

P
Printables

2U Right-Stepped Slash & IntlRo Keycap for JIS Layout (Left-Only Input)

This is a 2U Right-Stepped Slash & IntlRo Keycap. Only left side of the key switch activates even if you press the right side of the keycap. This keycap uses OEM profile. I made this keycap because key rollovering with IntlRo didn't work…

P
Printables

TTI_Combat TLR-1 HL Key

I found the gap to big for liking with the 1913 key so it needed to be adjusted.

P
Printables

Streamlight TLR-1 HL Lens Cap

This is a Lens Cap for the Streamlight TLR-1 HL This may also fit the Braun - 1000 Lumen Rail Mount LED Light (This cap fits my Braun light, but is slightly loose)

P
Printables

Gas pedal for TLR 7 Sub

This is a gas pedal for the TLR 7 Sub for a P365 X Macro. I remixed this model to better fit my pistol and the shooting. I extended to shelf so it better fits the frame of X Macro and also lowered the picatinny clamp so the light sits…

P
Printables

Mamiya Sekor Rear Lens Cover for 80mm f/2.8, 105mm f/3.5, 135mm f/4.5, 65mm f/3.5 TLR lenses

Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…

P
Printables

Version 1: Lens cap for TLR with mounted filter, bayonet 1 (Aires reflex, Rolleicord, Rolleiflex, Yashica, Minolta)

Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…