DOORSTOP - DOOR WEDGE - DOOR STOPPER - (Tested)
Easy To Print Doorstop !!
Print approx. €3.71–€4.54 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 3,612
- Likes
- 460
- Rating
- 4.82
4,539 models
Easy To Print Doorstop !!
Print approx. €3.71–€4.54 excl. taxPreliminary estimate for PETGSource material: PET
Easy to use print stoppers These drill stoppers come as a paired collet and a nut. They are simply screwed onto the drill bit to the desired drill depth. No tool needed. The collet is kept small and doesn't mask the ongoing drilling.…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
bylo potřeba udělat nový doraz který nebude na zemi - důvod: doraz se posune a nefunguje 1 - byl vytvořen doraz doraz který se pověsí na dveře (šířka 14mm) 2 - doraz byl moc tvrdý = byl dodělán flexi nástavec důvod proč je doraz z dvou…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET
Inspired from existing "Stoppy Stoppy" stopper available in the market.
Print approx. €2.80–€3.43 excl. taxPreliminary estimate for one variant
I highly recommend printing from PLA which should be food safe.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
A universal stopper for most bottle sizes, for soda, beer, wine or other bottles. It keeps your bottles neatly in place. You only need 0,6 meters of filament to 3d-print one single Bottle Stopper!
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
A replacement for a common type of ball-shaped, spring-loaded stopper, for tightening drawstrings on clothes, bags, etc. You'll need: 1x print included “Body” model 1x print included “Plunger” model 1x spring +-11mm long, +-7.5mm outer…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
I maked a simple cake topper for german people. Ich habe ein einfach Kuchendeckel für Deutsch Leute gemacht. Material: PLA Enjoy.
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE HEART CAKE TOPPER Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings, birthdays, and any other…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
You can print this without support. I printed it on the XL but it should be fine on the MK4 or other printers as well. If you scale it down, it's also a nice Christmas ornament. If the hole is too big you can add a modifier in the slicer.…
Print approx. €2.95–€3.60 excl. taxPreliminary estimate for one variant
Decorate your Prusa MK3 printer with this cute Prusa Pal Wolf that sits nicely on top of the z-axis parts. (Under 1 hr Print!)
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
Printed with 0,2mm layer, 15% infill. Very easy to print. Scale it up or down as you need :) I’ll be glad if you share your print! NEW: Print a friend for your bird: bunny
Print approx. €0.54–€0.65 excl. taxPreliminary estimate for one variant
Summary Stopper for office chair for simracing and flightsimulators. Due to the round design, there is no need to adjust the wheels orientation. The model is fully parametric. A list of all variables and their default values: d_wheel =…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
A simple wine stopper that you can use either for still wine or sparkling wine
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
A two-color newlyweds silhouette topper
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE HAPPY ANNIVERSARY CAKE TOPPER Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings, birthdays,…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Un topper para pastel de primera comunión. Hecho con PLA Teal de Polymaker. Impreso en Prusa Mini.
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for one variant
Novelty Door Cheese Wedge at 3" by 1.2" (76.2mm by 30.48mm) Prints best with organic supports, pre-sliced for your convenience. A simple design that'll always catch an eye, perfect for that Packers fan or Wisconsinite. WARNING : Please do…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
"Joyeux anniversaire" Cake Topper (Happy Birthday in French) with Leckerli One Font. Need to be printed with brim if you take the STL otherwise the risk it move is high. Also make some support for the small “spike”. Otherwise juste take…
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE JUST MARRIED CAKE TOPPER Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings, birthdays, and any…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
This is a door stopper / latch designed as a replacement for a camper van (RV). This keeps the door open in windy conditions You have to print both files and attach the catch to the wall and the latch on the door. It is recommended to…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET
This is technically one of my “Swoop” designs, but it looks like diamonds to me (or the Eye or Sauron, you pick). It's the last ornament in this series. I have many other series left to publish. I plan to publish one Christmas ornament a…
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for one variant
I made an English and German version, printed in PLA 0,2mm structural IS preset. First color is background (white), second is the writing (black). Thickness of background is 1,2mm which gave me enough stability with Prusament PLA.…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
These little feet lift our laundry hanger to Roomba's bumper height. Now the robot can still move the entire hanger around, but it doesn't trap itself anymore. :) The included STL is for a hanger with a 17 mm diameter foot bar. The…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
I designed this model based on the iconic cartoon scene where Plankton is crushed by a foot, making a simile between the boot and the door, where in both cases the character is crushed, giving a funny and comical touch to this gadget.…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Consult via instagram for name change. Duration:1hs approx Ask us for custom designs! More designs: https://cults3d.com/en/users/Argentina3DPrintings/3d-models
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
NEW UPDATE - The assembly issue has now been resolved! You can now use the “Spill_Unbeveled_Fix” file to assemble the spill to the cone and scoop! If you prefer, you can also use the gcode file provided. Again, apologies for any…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
I made this model to use on all birthdays. I added the possibility of putting an interlocking candle holder at the top of the ‘birthday’ a
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Printer: Prusa MK3 Material: PLA Infill: 15% Time: 3h 36 Support: No
Print approx. €2.67–€3.27 excl. taxPreliminary estimate for one variant
happy birthday topper
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
The object is printed with the front side facing the bed.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET
Ghostbusters light up sign tree topper for your Christmas tree. Just add an LED light strip and feed the power cable through the stem. For the sign, I attached it with clear tape. Also, it is best to print the sign with white filament,…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
A "Happy Anniversary" cake topper in the Agency font. For other cake toppers using this font, see my collection Agency Cake Decoration . The Agency font I used here comes from the open-source application Inkscape . Since Inkscape is…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
A quick to print decoration for the birthday cake. No support material. Have printed it with PLA and PETG and its designed with Fusion 360.
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
Kitty cat wants to know what's going on out there! This is a wall-mounted door stopper that grabs the edge of your door with its cute little paws. Designed for both Halloween and Door Stopper contests (not sure you can enter both with one…
Print approx. €5.89–€7.20 excl. taxPreliminary estimate for one variant
Thread these onto weight belt to stop the weights sliding around. Best printed with tough and flexible plastic (PETG or nylon) with high infill. Should fit onto standard 5 cm webbing/belt. There is a file for the short (normal)-sized ones…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET
IF THE WIND THROUGH A WINDOW IS A PUNISHMENT FOR YOUR DOORS, USE A DOOR STOP LIKE THIS MODEL AND YOU DON'T HAVE TO CLOSE THEM ON A WINDY DAY. MATERIAL ABS - NOZZLE 0.4 - QUALITY 0.2 - WITHOUT SUPPORTS - FILAMENT USED (m) 11.79 - FILAMENT…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
🦑🔺 Squid Game Guards – Zápichy do dortů (Squid Game Guards Cake Toppers) 🎂✨ Tento 3D tisknutelný zápich do dortu přináší tajemné strážce ze seriálového fenoménu Squid Game ! Maskovaní dohlížitelé s geometrickými symboly na helmách…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
The two pieces must be printed twice. The pieces can then be assembled with a rod passing through the middle. The rod can then be lashed to the tree to hold up the topper. I printed this at full scale with natural PLA. The crown shape…
Print approx. €4.61–€5.64 excl. taxPreliminary estimate for one variant
Ballerina cappuccina cake topper / dortový zápich
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
Wasps can be a pain around sweet or alcoholic drinks. Even worse they can be a literal pain if they get into a can that you drink from because you don’t know they are there. Use a FOW Wasp Stopper. Fits easily into the opening of a…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
🖤🐰 Bing & Flop – Zápichy do dortů (Bing & Flop Cake Toppers) 🎂✨ Tento 3D tisknutelný zápich do dortu přináší ikonickou dvojici ze světa dětských pohádek – malého králíčka Binga a jeho ochranitelského kamaráda Flopa! Perfektní dekorace pro…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
I bought and old IKEA shoe cabinet (probably an old version of the Hemnes cabinet ) to remodel it into custom one that better fits into the room. While the cabinet was in a good general shape, many of the little plastic plug that guides…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
V2 of my steel wire stopper which can now be secured with just two M8 screws with proper washers. Best with self securing screws. Stopper can be mounted on winch steel wires to indicate the resting position of the wire. Designed for wires…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for PETGSource material: PET
foot shape door stopper
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant
A complete kit to mount the Topping MX3s Amp+DAC, Remote and Power Supply neatly on the underside of your desk, or anywhere else you'd like to put it! Other Topping Amps / DACs These parts were designed for the MX3s. However, some parts…
Print approx. €6.37–€7.79 excl. taxPreliminary estimate for PETGSource material: PET
20 cm, 10 cm, 5 cm, 3 cm, toppers, keychains - three colours
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Toilet Stopper for Roca Victoria
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
wall art, coaster, toppers, decoration (two colours)
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Couldn´t replace just the old stopper because of huge hole in cabinet wall, thus I added extra screws and support structure for the holder. Printed with PLA Prusament and 0.2mm layer height.
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Endstopper für Wohwagen T-Schienen. Es wird noch ein Gewindeschneider M4 benötigt. In die Flügelmutter und die Klemme muss noch ein M4 Gewinde eingeschnitten werden. Danach kann mit einer handelsüblichen M4 Schraube M4x12 die Klemme…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Capuchino assassino cake topper / dortový zápich
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
I model it so that supports are not needed. You print it in 3 parts and fit it together with a joint. If the joint is too loose, you can glue it with superglue or JV weld. The benifit of 3d printed tree toppers is that they are lighter…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
Printed using PLA with 4 perimeters. Use superglue to bond the plate and the pin.
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Das Teil wird an der Badewanne festgeklemmt und verhindert, dass die Badewannen-Duschwand sich beim Dusche über den Wannenrand verschiebt. Zur Befestigung wird es einfach über den schmalen Bereich der Wannenwand gesteckt und so weit…
Print approx. €6.62–€8.09 excl. taxPreliminary estimate for PETGSource material: PET
Door Stopper – 3D Printable Model This simple yet functional door stopper is designed for easy printing on any 3D printer. It has a compact, circular shape with an inner hole, allowing for easy placement and removal. Print Details:…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…
After seeing a lot of cake topper models being uploaded after the author just changed the text, I challenged myself to create an OpenSCAD model that could be customized for any occasion. Happy Birthday Nate Happy 47th Birthday Happy 50th…
BOM: Printed with ROSA3D High Speed PLA Gray This is a modern, functional door wedge designed with a structural honeycomb lattice. Unlike solid door stoppers, this design utilizes the natural flexibility of the hexagonal geometry. When…
Brachio Door Wedge Bring a little prehistoric fun to your home with the Brachio Door Wedge, inspired by the friendly and iconic Brachiosaurus. Its low-poly geometric design combines functionality with a playful decorative look, making it…
This is a design I made for this holiday season. It's a low poly Christmas tree-topper/torture test:P Print instructions I would recommend cutting a bit of the base in the slic3r (depends on the slic3r settings) so that there are three…
Simple Christmas decoration. Must be printed in vase mode (or spiralize) to be empty (and lightweight). Just remove the base layers to insert it on top of the Chrismas tree. If you like this model and you're looking for other Christmas…
I went to iterate on the Belt Tensioners. The ones available do work just fine but i wanted to have them look more integrated into the Neptune. x-Axis: There is a 4 Pro specific version included. y-Axis: There is a Plus & Max specific…
This is my Door Stopper Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: OWL-Filament PLA Perl Orange Metallic Category: Gadgets
EDIT 02.03.2026: Added an alternative version with grip grooves, which can provide improved grip in certain door and flooring combinations. The Flex-Hex-Hook is a compact, flexible door and window stopper optimized for TPU printing. The…
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE CAKE TOPPER HAPPY BIRTHDAY Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings, birthdays, and…
Remixed from a variety of sources. See links below. I scaled and modified each model to work with my universal post adapter. Print a universal post adapter for each model and glue the dovetail joint before painting. The paint and primer I…
Harry Potter cake topper, you can adjust the thickness, the thinner the shorter the print, but also the lower the streng
A collection of kitchen and bathroom drain strainers, stoppers, and drain pads. Useful for kitchen sinks, bathroom sinks, utility sinks, bathtubs, and probably more! Before printing, please review the list of models and their respective…
Star for the top of the tree. Hopefully someone else can also use this model. Printed with supports touching the build plate, probably only needed them for the lower points not the upper ones. Layer Height: 0.2mm Nozzle Size: 0.4mm…
This light-weight design fits snuggly onto the top branch of a Christmas tree. The diameter is 9 mm, but the design scales well. Merry Christmas! :) Printing: There are no difficult overhang angles, but due to the small first layer, the…
Christmas Star Tree Topper Recommended Slicer Settings Brim 50% Sizing (for most trees) 0% Infill Low density supports For the Cone/Base Use vase mode if possible Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: Yes…
Use it to anchor a door or window in any position. It uses a clamp-like mechanism. Screw the bolt to make a friction with a perpendicular to the door surface. A door can still be fully closed with a mounted stopper on it. Just unscrew the…
This reusable stopper will keep insects and sand outside your bottle, while keeping most of the drink inside. It works with opened bottlecap bottles - and can be printed in PLA! Stoppers come off with a satysfying pop, while the loop…
The rapid movements and vibrations of the printer have a tendency to loosen the belts on the Elegoo Neptune 4 Max. These stoppers will lock the tension knobs. For some reason, my CAD program flips the exported .step files on the y-axis.…
A Star Tree topper inspired on the star from Super Mario 64 The inside is hollow so you can add any kind of lights you would like. The holder is as well so you can connect the wires outside if you would like. You can print it without…
Some time ago I found a silicon tube stopper on thingiverse - but it didn't fit tubes sold here (those are 16mm OD of the screw) So I made a new one - but it didn't seal well And then I designed this model, it has space at the bottom (or…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Just a simple modification to @BorisAvramov_915542 's original X Axis model. The Neptune 4 Pro assembly is slightly different requiring the thin ridge mating to the printer's housing to be a little shorter. The model is a tight fit like…
I had a co worker ask me if I could make some reusable wedges for him on the 3d printer. Instead of looking for a model that was already availble I descided to design one that has features I would want in a door chock. I printed this in…
Grogu With Star Tree Ornament. Designed in Blender. Added hole for easy instalment on top of Christmas Tree. Need to give 99 percent of the credit to these designers: Chris aka Inspyre3D and Phillip Bennett aka Fracture999 On…
Birthday Cake Toppers - all numbers Here you can download all digits form 0-9 as cake toppers for birthday cakes or other anniversaries. They look best if printed in two colors, e.g. with a white outline. How to Print Just scale to the…
Labubu Pencil Topper – Fun Character Head for Your Pencil Bring some mischief and charm to your desk with this Labubu-inspired pencil topper ! Designed to fit standard pencils, this playful head captures the iconic look of Labubu — with…
Designed a chair wheel or castor stopper so that I could still use my chair to play racing simulators. The wheels are 60mm diameter and 54mm width (60mm x 54mm). The chair I'm using is an Ergochair ripoff, so you shouldn't need to remix…
Simple and concise design. In the photo I have the first version of the tube, the tube is shorter. Don't forget to give me a like 🧡 Share photos of your prints 🎨
I just want to make the elegoo Neptune 4 max community lives a bit easier… i did not find on this site a Y axis belt tensioner stopper for my 4 max… but thankfully for the creators of thingiverse.com mk659 and SebastianRubner i was able…
Print two snowflakes and one holder and slide together. Holds together without glue.
To assemble slide the middle onto the main body then screw the cap on. The inside has a taper so you should just push the fidget onto your pencil and it will fit tight.
Do you find it difficult to concentrate when reading a book and mix up sentences you read? We have something you will absolutely love! This is the brand new reworked and redesigned pencil topper which will help you concentrate while…
To prevent the rotation of the belt tensioners in the long run, I have designed a suitable bracket. Print Settings Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20%-40%…
Eine kleine Hilfe um Fenster bei durchzug offen zu halten. Zur Aufbewahrung einfach am Henkel befestigen oder an einem Nagel aufhängen. Gedruckt habe ich den Fensterstopper in TPU damit er elastisch ist. A little help to keep windows open…
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE FELIZ CUMPLEAÑOS CAKE TOPPER Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings, birthdays, and…
Tree Topper Star Print with supports, zero infill, no bottom layer. Supports are very easy to remove as they only touch the bottom edge of the star and do not touch any visible surfaces. Zero infill and absence of bottom layer can result…
Now the Cute Stylized Dinosaur Toy can stop your door ;-) Would be happy to see your makes!
This is my first cake topper I have ever designed to be printed from my 3D printer. I am absolutely loving doing these! If anyone is interested in purchasing a custom made STL or even a print, just shoot me a message to discuss.
Simple window stopper that prevents unwanted windows closing.
At first I noticed that the Creality filament was falling off the holder during test printing. After that I saw that during fast printing the spool was also moving a bit and decided to make such a stopper. To keep it tighter and less…
Leaf - door stopper A door lock that looks like a leaf that fell from outside. If you need a door with a larger gap, set the leaf scale in the Z axis as I showed in the image. To use it on a slippery floor, you would need to stick…
Design Concept This flexible door stopper combines functionality with a simple, modern design. The grooves allow for additional grip and flexibility, adapting easily to various door gaps. Usage Ideal for home or office environments, this…
I couldn't find a basic star with clean flat faces so I modeled one for myself. Printing Instructions: I recommend printing it upright with zero bottom layers (to make the hole) and supports for the bottom edges of the spokes on the star,…