299 models
Keep your tires safe and legal with this compact Tire Tread Depth Gauge ! This tool helps you instantly measure tread depth to see if your tires still meet the legal minimums: Winter tires : 4 mm reference Summer tires : 1.6 mm reference…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Carefully set up your printer! Because 1/2 UNF thread will be printed. My settings are: Resolution 0.15 Perimeter 4 Without any supports Included 20mm Brim on the outside only I used Prusament PLA Simply Green . You can easily use other…
Print approx. €6.95–€8.49 excl. taxPreliminary estimate for one variant
Comfortable barrel tread cap for airguns with 1/2 UNF tread. Tread is fully functional, which also depends on the precision settings of your 3D printer. The cap protects the thread from contamination and damage. Printer settings: 5 top, 5…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
This is more of a build log than direct instructions - I wanted to share design decision I made - maybe it will help someone in whatever they will design. However if you are crazy enough to build one - here you should find all the…
The goal of this project is to design and produce a fully 3D-printable set of treads for use on future robotics projects. Each link is 40.5mm wide; the hub is 40mm in diameter excluding the teeth that mesh into the links. The hub model…
Tread clicker fidget, taking inspiration from some of the best creations I have seen and creating a satisfying, easy to build toy. Requires no glue and can easily be assembled in under 1 minute. The track clicks either direction and is…
my son was short a couple track pcs' so I took it upon myself to try and make some… after about 9 prints of trial and error.. this one is not too bad… if you print with a smaller nozzle and fine detail it will probably turn out better…
This is for your XT2. You can use it as a bumper or add the sun screen for extra utility. Print it black or crazy colors to customize your bike. If you print it please upload a picture and share your creation thanks! If you like this,…
This is a tire tread depth gauge you can use to test your tires to see if they need replacement. If you live where it is wet you are good until your tires are at 4/32" or 3mm of tread depth. If you live where it snows it is recommended to…
I designed this because I wanted a more realistic tire model for my RC car designs. So here goes! The tire prints without supports and without infill when put on the side. With TPU it should take ca 10 hours per tire (0.3 Draft) . The rim…
This model is compatible with the lego system.
This model is compatible with the lego system.
Will need to be printed twice, recess underneath for m8 bolts All-Purpose Stair Measuring Tool – Ideal for installing stair treads, risers, and shelving this wood stair tool helps you quickly and accurately measure angles so you can…
The Grave Digger Tank has rubber treads. If they break then the tank will no longer work. You can 3D print a replacement with this model. Print in TPU with standard settings.…
I've designed and printed a custom phone stand to address a common issue for taller gym-goers. Traditional phone holders on treadmills are often too low, which can be inconvenient. My design is specifically tailored for 'Life Fitness'…
This is my third tire design and this time it's a new tread profile, Michelin's Alpin 6 winter tire. The tire prints without supports and without infill when put on the side. With TPU it should take ca 2 hours per tire (0.3) . The rim is…
Markings for 1,6 m.m on top (standard min depth). 10, 4 (recommended min winter tire) and 3 (recommended min summer tire) mm has longer markings. Print in place with color change. Twist gently to loosen the pin. It should stay retracted…
This is a simple fix for the track/treads of the excellent Killdozer remix by MakerKJS (www.thingiverse.com/thing:4851061) I wanted to print a mini Killdozer, and when I scaled the model down to 50% a thin area of the treads turned into a…
Tire profile measuring device, with this you can easily check whether the tire profile is still suitable. 1mm 1,6mm (minimum tread depth/Mindestprofiltiefe! - EU) 2 mm 3 mm 4 mm (winter tire - minimum tread depth/Mindestprofiltiefe…
-Print bumper in TPU face down on print bed -Print Visor in ABS or PETG If you like this, please post a review and photos of your creation. Thank you! No supports needed!
This is the size I'll be using with my Dodge Ram remixed body ( I'm going to re-remix this body but that's another story !) The tire prints without supports and without infill when put on the side. With TPU (depending on the brand) it…
What's the love child of the Customizable MakerBelt and Emmet's Gear Bearing? A fully printable tank tread assembly! It's not only fully printed (no screws or bolts) it's printed assembled, ready to use! Note that the belt is printed in…
Fully Functional &3D Printable Tank Tracks!!!! Great for a variety of projects/robots! Assembled Dimensions: ~2ft x 1ft x 1ft Shaft is a 8mm (5/16") rod Print Settings: 10 Walls 30% infill ( You can cheat on the idle rollers, idle frame,…
Wheels for my business card embosser, this time with a diamond tread plate pattern. Designed to work with: https://makerworld.com/en/models/485772 please download and print the case + gears from above.
Print Instructions: The large clamp part were printed at 40% infill clamps should be printed with the circular pattern facing the bed for best strength, causes thread to be a bit messy but will still work Tray and Tray Body 30% Bolts and…
I made a simple phone holder so I can watch shows while at gym without having to look down all the time. This holder fits the screen of TechnoGym treadmills (typically at LifeTime Fitness) and holds my iPhone 16 Pro in Apple leather case.…
Versions: v1 - prototype version, without threads and tightly fitted
Designed to be an alternative to replacing the lawnmower wheels when you have no tread. This print fits around the existing wheel to give your mower a new tread. This is a less expensive and easier fix to replacing all the existing…
The clip for the tether on my treadmill broke and I decided to design and build a replacement. I originally printed it with 20% infill and it worked fine, but I reprinted it with 100% and it feels a lot sturdier. Not too bad for my first…
The Treadwell Droid has a claw utility arm. The found prop is an ice cube grabber. These are still available to buy, but I wanted to 3D draw it up to see if it would work. I drew the two pain components, the claw body and the actual…
This model is compatible with the lego system.
Summary: Gadsden Flag themed magnet with no MMU/AMS needed for multiple colors, simply pause on layers to change filament. Magnet measures 3"x2.67" (76mmx68mm) WxH. Print settings: PLA, 0.4 nozzle, 0.2 layers, 2 walls, 10% gyroid infill,…
Print two arms which then hang from the top of the screen. Not sure if it would fit the Tread+, that has a different screen so it may not. Arms are not rigidly connected but I found with the weight of iPad/phone holding them they don't…
This model is compatible with the lego system.
Gyro2 with tread pattern! Looking for a Gyro that's fast, fun, and easy to print? Meet Gyro2. It has that perfect spin you know you want and an awesome pattern that is sure to impress anyone! So what are you waiting for? Print now and let…
You need high resolutions
These simple holders allow you to hold your tablet a bit higher on most treadmills and crosstrainers. I printed mine in TPU so that they dampen the vibrations and survive inside my gym bag.
Cast your own tires using this 3D printed mold. The tires created by this mold are designed to fit a 26mm wide 1/10 touring car wheel. Resin Casting Tutorial Playlist…
Remixed to remove need for supports. Print Settings Printer: Geeetech A10M Rafts: No Supports: No Resolution: 0.2 Filament: GENERIC PETG / PLA Notes: Print Vertically Category: Replacement Parts
Background This is a printable tread I create for the popular Power Wheels Jeep ride-on toy (specifically the Minnie Mouse jeep, but others have used the same wheel design). Over the years, the plastic wheels wear (especially if your…
Fully printable tool for measuring an exact template of a stair tread or riser, that you can then transfer to a workpiece to be cut out. Key features: Fully modular - print as many rails, bolts, knobs, etc. as you need for your situation…
This model is compatible with the lego system.
My fiancé bought a treadmill but it didn't come with a phone holder so she asked me to design a holder that would hang over the top of the treadmill dash. Thought I would make it “motivational" by embossing the famous Simpsons scene of…
I printed the tread/track with black TPU. Print the wheels with PLA (indoor use) or PETG for outdoor use.
This is a finger treadmill. It can exercise your fingers, and also be used as a fidget. It prints super easily, and can be assembled with superglue. Print Settings: Infill: 5% or higher Supports: None Material: Any Hard Material
this is a simple tread stress toy id reccomend printing at 50% scale, assembly is easy! just snap the treads together and then thread it onto the wheels and press the body together, no glue needed!
wanted a tablet at eye level for my 2950 treadmill, so i made one. This clips on to the small gap on the top of the display. Fits a Samsung S7 tab, but should also work with a 10-11" ipad. Hope it works for you! Note you have to print 2…
This model is compatible with the lego system.
this is 90 degree Elbow connector with ¼" NPT tread. All dimensions are standard sizes
I designed this little adapter to put together a small toy tank based on other 2 designs: a foldable print in place tank body (https://www.printables.com/model/437973-print-in-place-tank-body-fab365-style) and a couple of tank treads…
Fidget Treads But Only Treads! This print is a fully print in place fidget toy and very fun to just spin around your hand and can even be fit in a pocket! Have fun printing this toy and make sure to rate the model or upload a make to help…
This model is compatible with the lego system.
The tread template that WCP sells is too expensive (It's $60). This one is cheaper (by a lot). Each half does NOT fit on a Prusa MK2/3/s/+ (sorry). With some cutting of corners (literally) you could probably fit this on a Prusa MK2/3/s/+…
This model is compatible with the lego system.
This includes a sprocket and treads for any model rover or rc vehicle you may be creating. Treads- The treads are easily linked together using standard filament meaning anyone who is able to print them can also assemble a link of treads…
My treadmill didn't have a nice place to hold a water bottle without it bouncing around while running. This fits on the arm of my treadmill and has a divot+holes to run a cable tie through to hold it firmly in place (see photo). I feel…
Extra traction and quieter rolling on smooth surfaces for the Foot Roller.
In case of a blob or other incidents where the cowling might get damaged or destroyed with these prints here you can have a spare at hand. All 4 individual pieces are interchangeable with the stock parts. So you can use them individual or…
Designed the frames to be linkable to make a large tank setup. Frames are braced together using 2020 extrusion & M3x8mm screws & T-nuts (Some plastic welding between frames may be necessary) I have mine braced with 2020 extrusion and the…
I love the LEGO Technic Liebherr Crawler Crane LR13000 (42146) , but I felt the Link Tread Wide (88383) was too narrow, so I designed a tread extension. This takes the tread width from 5L to 8L. These parts are printed in ABS with 20%…
This model is compatible with the lego system.
This is a simple tablet holder I designed for our Nordic Track T series 8 treadmill, it holds a tablet above the display. It works especially well if you put a piece of felt between it and the treadmill. I recommend printing with a brim…
Circle spinner with tread pattern
This solder heat press design is specifically crafted for embedding threaded inserts into 3D printed parts, enhancing their structural integrity and utility. At the core of this design is an integrated soldering iron, meticulously…
This is a design to replace the broken original safety key for a "free spirit" treadmill, by dyaco. It has been tested to work perfectly. I printed this from PETG, though PLA would give more faithful detail, I expect the PETG to stand up…
Created to custom fit the left-hand side tray on the HORIZON 7.0 AT STUDIO TREADMILL. This is a second version that has been refined after testing. Added padded foam to stop vibrations with some cups and fitted with double-sided tape.
This is a model I made a few years ago when I made my first available tank on cults 3D. I do not fully recommend printing these, they're very difficult to get right, and the frame's design isn't very sturdy. I will be revisiting this in…
When our old treadmill turned off intermittently, I looked into the cause. The key presses a micro switch which could not be modified, but the key was loose in the slot so vibration would cause the switch to deenergize the treadmill. I…
This will clamp onto anything that is about 31.5mm X 56mm, at a 14 degree angle, and has totally rounded edges (like the arm of the TR150 treadmill). It is made to attach to the right (starboard) side of the treadmill from the perspective…
I wanted my Onewheel mini to look more like my real XR, So I designed a treaded tire that will work on a Onewheel mini. I printed it with a resin printer, but FDM would work too I guess! Print Settings Printer Brand: Anycubic Printer:…
A small keychain which can check tyre tread depth 2.5 g. 19 mins.
Print two times. Additional needed supplies: Qty 2 - ¼" x 2" Carriage Bolt Qty 2 - ¼" Wing nut or equivalent Qty 2 - Washer Qty 1 - Wood
Replacement tread for the Roborock S50 / S5 robot vacuum. Printed in eSun TPU 95A Flexible. This TPU feels slick to the touch but seemed to have enough grip on tiles when in use. A softer TPU may work even better; must be printed in a…
Jig for cutting stairs treads of shelves. All you need is a piece of 2x1" wood and some wood screws. Optimal wood size = (<Target Width>-140mm)* 2/3 If it slides really hard - sand the wood a bit so sliders can move back-and-forth with…
Cast your own tires using this 3D printed mold. The tires created by this mold are designed to fit a Mini-B rear wheel. Resin Casting Tutorial Playlist https://www.youtube.com/playlist?list=PLyysFycibsx2_bjo1-r2uoug9edZcFnTx Related…
Hello, Welcome to my profile, full of models and miniatures :-) I have RC car RMT Land Rover T98 treads for you. They are suitable for embellishing your RC model. They are in 1:10 scale. No glue is needed to apply them, they stick to the…
Another laser cut scatter terrain piece of Star Wars Legion, this time a treadwell droid. Its not terribly accurate, but it's as close a 3mm on one side as a constraint as could be. Print Settings Printer: k40 laser cutter Notes: Cut and…
A simple tank tread. Dimmensions in photos Only for soft materials (flex, tpu)
I recomend printing the pins at 100% infill and if the track is wobbley than print the pin at a bigger sise
A practical and compact tire tread depth gauge that allows you to quickly check the wear level of your vehicle's tires. Thanks to its simple design and easy-to-read scale, measuring tread depth is quick and convenient. Its compact size…
The gauge provides two fixed measurements: Legal Minimum - 1.6mm: This measurement represents the legal minimum tread depth requirement in most of the World, such as Europe, North America and India. Recommended Minimum - 4mm: This…
So you can put your phone higher up. You can print it on it's side with no support. I cut out some holes to reduce material use.
This model is compatible with the lego system.
This model is compatible with the lego system.
Replacement treads for the Tyco Fast Traxx RC Car
Printed out @3DPrinty wonderful twisty fidget and immediately thought about making a tire variant and here we are. I have 6x2 magnets and made that an option as well while I wait on some 6x3 magnets to arrive. Print at .2mm layer height…
No supports needed, easy print. My wife wanted a pencup so I made up a few to give her options, here's one of them. Printed on Ender 3 Pro.
This is a design to replace the broken original safety key for a "free spirit" treadmill, by johnson.
This model is compatible with the lego system.
Phone holder for treadmill with four different positions. Print instructions Category: Sport & Outdoors Summary Phone holder for treadmill with four different positions.
A tileable piece of treadplate at 1/5 scale
Since the Garmin Tread SxS 8" and Overlander works well with the WunderLINQ we've designed an adapter that allows you to mount the Overlander to the BMW Nav Bar. The adapter reuses the original BMW Nav cradle bolts and rear piece. The…
