Search results: trim

Sort order

1,889 models

P
Printablesmakerl1969

Router Jig Trimming Radius

Cut perfect outside radiuses with your router and these templates. I offer several versions with different radiuses. The jigs have integrated T-slots, so you can fix them with fastening clamps like the Festool FSZ 120 or FS-HZ 160 to your…

Downloads
1,802
Likes
473
Rating
5
P
Printablesyossarianmtu

Stihl FS91 and FS31 Trimmer Wallmount

A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to…

Downloads
1,727
Likes
190
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 16 - Gingerman (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,278
Likes
289
Rating
5
P
Printablesaith53

Replacement Beard Comb for some Philips Hair Clipper Beard Trimmer HC BT models peine barba

Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.

Downloads
852
Likes
71
Rating
4.25
P
Printablesschuetzi99

trimmer blade using zip tie for Bosch, Güde, Einhell, Lidl

This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…

Downloads
788
Likes
104
Rating
4.33
P
PrintablesYanno

Makita DUX60 Trimmer Wallmount

Sturdy wall mount for a DUX60 Makita trimmer. I modeled this around my specific machine and you may need to scale it up to make yours fit properly. Mount it with 3" to 3.5" #8 construction screws. Make sure you get the screws in a stud.…

Downloads
740
Likes
75
Rating
5
P
PrintablesMarcel

Klinge Rasentrimmer Einhell, Grass Trimmer Blade

ASA or PETG 0.15 Layer No Support, no Brim needed 100% infill

Downloads
473
Likes
36
Rating
5
P
Printablescomcloudway

Einhell Trimmer Replacement Head (String)

Transforms your Einhell Single-Blade Trimmer into a string trimmer. Use at your own risk, the wire might get loose and fly off at high speeds, which can lead to injuries, always make sure to wear proper safety gear. Printing Choose an…

Downloads
424
Likes
57
Rating
5
P
Printablesbeerwema

Trimmer to potentiometer adapter/Trimmer with turning knob

Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…

Downloads
321
Likes
32
Rating
5
P
Printablescrashkg

Festool Track to Dewalt Trim router

You can either print as 2 separate parts with 1 very small support on the part that goes over the track, or print as 1 part. The 1 part will take more support and more time, is also not printed in the strongest orientation. For 2 parts…

Downloads
303
Likes
48
Rating
0
P
Printableszuberio

Ridgid Trim Router Vacuum Hose Adapter

Very minor supports built into the adapter. (see red in below image). This adapter is designed for the tapered suction end of my central vacuum hose. Connection diameters are as per the following image. 0.2mm layer height 0.4mm nozzle PLA…

Downloads
250
Likes
41
Rating
4
P
Printablesnkitani

Hotend PTFE tube trimmer for i3 MK2.5S/MK3S/MK3S+

Print details: Material: PLA Printer: PRUSA i3 MK3S+ layer height: 0.20mm Supports: no Infill: 15% [English] The PTFE tube inserted in the hotend of the PRUSA i3 MK2.5S/MK3S/MK3S+ must be bevel-cut at both ends at 60 degrees. It is…

Downloads
242
Likes
57
Rating
4.83
P
PrintablesNighthawk

Door trim tool

Simple tool to help set a ¼" reveal on a door frame with wood molding. Similar to the “Trim Buddy” Also has 45 degree angle to mark your miter cuts. Printed with 4 perimeters and 50% infill but this can be reduced to 25%.

Downloads
240
Likes
14
Rating
5
P
PrintablesYitvan

Jeep Grand Cherokee Cupholder Trim

Jeep Grand Cherokee's often have a small issue with the material around the cup holder. This trim is coated in chrome and becomes very sharp when it peels; damaging or at least marking whatever is placed in the cup holder.…

Downloads
234
Likes
27
Rating
0
P
PrintablesKirk.D

String Trimmer spool cover

This is the spool cover for a Toro string trimmer. My trimmer is a model 51486 (24 Volt lithium) but I have seen a lot with this same cover. If yours looks similar, give this a try and let me know in the comments if it works for you. It's…

Downloads
216
Likes
17
Rating
5
P
Printablesmaxmar

Stands for Braun Razor/Trimmer/Groomer and Accessories (Ablagen für Braun Haarschneider und Zubehör)

Two stands for the Braun MKG5544 electrical razor/trimmer/groomer and its accessories. The accessory stand is for the different heads of the device. The stands might also work for similar models made by Braun. The accessory stand is…

Downloads
196
Likes
27
Rating
4.5
P
Printablesmysak85

Beard Trimmer Philips MG7720 holder

V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na holící strojek Philips MG7720 s možností připojení nabíječky. Vytištěno s tryskou 0.6,…

Downloads
122
Likes
19
Rating
5
P
Printablesjcjames_13009

Screw-on plastic clip for Hyundai Kona wheel-way trim

Designed using Fusion 360 from the original clip. I then printed a prototype that fits and works perfectly from the first time. It's now installed on the wheel-way trim of my Hyundai Kona I printed it in PETG using standard PrusaSlicer…

Downloads
109
Likes
18
Rating
0
P
PrintablesKamil Kaleta

Filament trimmer on the frame

I think this is self-explanatory design. All you need is a M4x15 screw with a nut, and Stanley blade. Assembly process: Print instructions Supportless, 10% infill

Downloads
109
Likes
37
Rating
5
P
Printablesdjedje_zr7

Wall mount for Black&Decker STC1840EPC Grass Trimmer

Wall mount for Black&Decker STC1840EPC The wall mount is in 2 parts (one for each handle) and 3 washers. There are 3 conical washers to prevent cracking of PETG when tightening the screw

Downloads
101
Likes
16
Rating
5
P
PrintablesMateuszMiler

Jeep Cherokee XJ 2door seat lock trim

Jeep Cherokee XJ 1 gen 2door seat trim around lever that fold seat - the crack after time best to print vertical with only neccesary organie supports as in Gcode attached, fits both sides - the same PETG Prusament - urban grey, fit the…

Downloads
91
Likes
13
Rating
0
P
PrintablesIronheartedGog

Truma Net X control panel trim

This is a very simple trim that will hide the screw holes when converting from an old Truma CP to the new Truma Inet X panel. This trim is 1.25mm thick, 124mm outer width (inner hole width 108mm.) Outer height 97mm (inner hole height…

Downloads
90
Likes
0
Rating
0
P
Printablesmkoerper

Philips Series 5000 (BT5502) Beard Trimmer Holder with Tray

Stand for a Philips BT5502 Beard Trimmer

Downloads
89
Likes
11
Rating
5
P
PrintablesMontschok

Airbag A B C Pillar Insert Trim Cover Badge

Seems to be a replacement part for 1K0 853 437B (5G0 853 437B). I made it for my Volkswagen Golf MK6 (2009-2013), but it should also work for a bunch of other VAG cars. Mine broke when the repair shop replaced the wind screen, so I made a…

Downloads
84
Likes
9
Rating
0
P
PrintablesIan Foulds

Wahl 9307A trimmer guards

My Wahl hair trimmers came with 9307A as an extra little trimmer, but it must have been meant to edge things only as it didn't come with any length guards. I wanted to use it on my beard so I designed this set of guards ranging from…

Downloads
69
Likes
9
Rating
0
P
PrintablesClamikra

Philips beard trimmer 9000 Prestige BT9810/15 Stand

The Philips beardtrimmer BT9810/15 is a premium device but lacks one important feature - a stand! So when there is no thing I have to design and print it. With this design you get a stand for securely storing your BT9810/15. And you get a…

Downloads
69
Likes
13
Rating
0
P
Printables3D Brothers

Šablona na ořezávání izolace / Insulation trimming template

Šablony na ořezávání izolace na potrubí. Velikosti : 15/10 - 18/10 - 22/10 - 28/10 ( Vhodné i pro izolace s 6mm stěnou ). 15/15 - 18/15 - 22/15 - 28-15 ( Vhodné i pro izolace s 10mm stěnou ). Pravý úhle, úhly na t-kus . Templates for…

Downloads
56
Likes
5
Rating
0
P
Printablesmozartsgokart

DR Trimmer Mow Ball Cap

Introducing a cost-effective replacement Mow Ball for the DR Walk-Behind Electric Trimmer. This 3D printable part is designed to replace the factory Mow Ball that typically wears out due to friction with the ground. Print this durable…

Downloads
46
Likes
1
Rating
0
P
Printableskrilleke

Haar-Trimmer-Aufsatz 12mm

Haar-Trimmer-Aufsatz 12mm, passend für Carrera Classic Modell 22163903 Art. 5835

Downloads
44
Likes
3
Rating
0
P
PrintablesBGDglider

Snap-Fit Charging Stand for MG5720 with Attachment Slots – TrimDock

Overview This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place –…

Downloads
40
Likes
18
Rating
5
P
Printablessquinn

Ring Holder with Hearts and Filament Trim

A fun little sculpture for holding rings which includes six channels for sliding in short strands of filament to trim out the look after it's been printed. Included are a couple of little chamfered hearts that you can use to further…

Downloads
40
Likes
13
Rating
0
P
PrintablesFreshdonkikong

Philips Nose trimmer Series 3000 Wall Mount

This wall mount is designed for the Philips Nose trimmer Series 3000. The locking mechanism is designed for easy handling and good grip. Various holding options are built into the back. In addition, the surface is large enough that the…

Downloads
35
Likes
12
Rating
0
P
Printablestom

Rechte Endkappe Wandanschlußleiste/ Right end cap wall joint trim

Ersatz für die rechte Endkappe unserer Arbeitsplattenabschlussleiste. Die Skizze ist ähnlich, der innnere Aufbau etwas anders. Translation: DeppL Replacement for the right end cap of our wall joint trim. The sketch is similar, the inner…

Downloads
35
Likes
5
Rating
0

Mazda 6 A-pillar trim clip

You can find it here with the part number D651-68-162A. Doesn't look exactly like in the catalogue, as mine one has the little “tail” separately, but I think it should be compatible. Also, most probably compatible with many other Mazda…

Downloads
34
Likes
5
Rating
0
P
Printablesrepe

Ikea Strimsäv magnetic holder

This is a simple magnetic holder for Ikea Strimsäv light. There is open space for 12mm magnets. Just put a drop of glue and put some magnets in the slot.

Downloads
30
Likes
6
Rating
0
P
PrintablesAlpacaBuilds

Aqara Door & Window Sensor Trim Shim

This model is for the Aqara Door & Window Sensor (affiliate link), and helps you level the two pieces inline with any door or window trim. My door has a ½ inch trim that frames it, and makes it not possible to keep the two pieces of the…

Downloads
28
Likes
4
Rating
0
P
Printablesgwendal

Shaper workstation trim router table Connector

Connector to attach a trim router table to the Shaper Workstation . It has an indent to hang the table on french cleats. See that project for bolt and knob needed to complete the project.

Downloads
27
Likes
10
Rating
0
P
PrintablesBGDglider

Foldable Reach Extension for MG5720 Trimmer – OneReach

OneReach – Adaptive Back Grooming Extension for Philips MG5720 Achieving thorough back grooming is often a challenge – especially for individuals shaving alone or those with limited mobility. OneReach is a foldable, modular extension arm…

Downloads
23
Likes
19
Rating
0
P
PrintablesShake

9MM PET BOTTLE STRIP TRIMMER V1

🧵 9mm PET Trimmer V1 – Ultra-Minimal Precision Cutter Meet the 9mm PET Trimmer V1, your ultimate tool for turning irregular PET strips into clean, perfectly measured filament feedstock — with not a single gram of plastic wasted in the…

Downloads
14
Likes
4
Rating
0
P
PrintablesErgoboy217

Edge Band Trimming Guide for 1/2" (12.5 mm) material

This guide is for trimming the edge banding on ½" (12.5 mm) cabinet parts. How to use: With one hand, grasp the guide on the “Top” (indicated in the picture) and register the bottom and side on the workpiece. With the other hand, slide…

Downloads
10
Likes
1
Rating
0
P
Printablesdrg1234

FJ Cruiser tailgate trim panel screw insert

This insert will repair the trim panel from the rear door of the FJ Cruiser of one of the two screws rips out.

Downloads
6
Likes
2
Rating
0
P
PrintablesLevikeOne

Trim removal pry tools

Not 100% accurate (scale and shape) because the models were made from photos. PRINTING MATERIAL AND POSITION IS IMPORTANT! I printed them in ABS. PLA may not be the best choice, my second choice beside ABS would be PETG or something…

Downloads
15,426
Likes
4,646
Rating
4.58
P
PrintablesMaxT

Christmas Door Trim Corner 18 - Santa Sleigh and Reindeer and Christmas Tree (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
7,197
Likes
1,613
Rating
4.96
P
PrintablesMaxT

Christmas Door Trim Corner 60 - Santa Sleigh and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
4,433
Likes
834
Rating
5
P
PrintablesAdam

Dashboard wire trim fit clip for dash cams

This clip fits between the trim panels on your car's dashboard to guide a dash cam cable. Design features This has an opening for a 4 mm wire, and is designed to be printed in flex material to make sure it doesn't vibrate or cause…

Downloads
4,350
Likes
2,340
Rating
4.94
P
PrintablesJollyRogerX

Auto Clip Fender Liner Trim

Push pin style clips. An assortent of 6, 8, 10, 12 mm diameter posts. Can easily be adusted during slicing by scaling x/y or z axis for inbetween customized sizing. Probably can print with any plastic but something like petg will provide…

Downloads
4,045
Likes
1,779
Rating
4.92
P
PrintablesMaxT

Christmas Door Trim Corner 61 - Gifts (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
3,079
Likes
730
Rating
4.98
P
Printablesjrmusan

Milwaukee string trimmer + Leaf blower mount

Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…

Downloads
2,995
Likes
417
Rating
4.85
P
PrintablesJugernought

Automotive trim tool set

Basic trim removal tool set used commonly for working on vehicles. I printed mine in PETG PRO with extra top/bottom layers and extra walls to increase strength. I would recommend adding a brim so they don't come unstuck and using supports…

Downloads
2,981
Likes
1,030
Rating
4.89
P
PrintablesMaxT

Christmas Door Trim Corner 17 - Deer and Christmas Trees (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
2,860
Likes
657
Rating
4.91
P
PrintablesJMAW

Serious Edge Banding Trimmer (cheap utility knife blades)

This edge banding trimmer is a lifetime tool that works pretty well. The tool make a perfect trim in seconds, is Very stable, especially on starting. You can reverse the blade when dulled. The trimmer allows up to 4mm thick banding. The…

Downloads
2,809
Likes
509
Rating
4.91
P
PrintablesMaxT

Christmas Door Trim Corner 62 - Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
2,284
Likes
489
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 57 - Santa Sleigh and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
2,269
Likes
488
Rating
4.81
P
PrintablesMaxT

Christmas Door Trim Corner 19 - Candy Canes (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
2,263
Likes
560
Rating
4.95
P
PrintablesMaxT

Christmas Door Trim Corner 65 - Christmas Elf (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
2,205
Likes
494
Rating
5
P
Printablespltaylor3

Ego String Trimmer Holder

Remix to fit my EGO string trimmer better. The original mount worked well for a trimmer that had a round shoulder, but this fits better with trimmers that have a rounded off square shoulder.

Downloads
2,202
Likes
262
Rating
4.96
P
PrintablesJohnMartin

Tracksaw Guide plate/adapter for Makita Trim Router

My take on a tracksaw guide for my Makita trim router. It may fit other trim routers but I don't own any. Will work on any Makita/Festool-style tracksaw guide. Has a guide slot to line up with the center of your router. You'll need…

Downloads
2,146
Likes
255
Rating
4.67
P
Printablesdildesigns

TRIMUI Smart Pro Detachable Comfort Grip

Inspired by the PS5 Controller, this grip is super comfortable and fairly easy to take on and off. Print in a more flexible and fatigue resistant material such as PETG, Nylon, etc. as the top clip needs to flex to take on and off the…

Downloads
2,095
Likes
105
Rating
4.75
P
PrintablesJERYNSON

Edge Trimming Gauge Tool (10-15-25-30-35-40-50)

Really useful tool for every furniture crafter out there. The tool is modular with different heads for different radii . The adjustable trimming depth makes it versatile for different projects, whether you’re fixing up furniture or…

Downloads
1,866
Likes
933
Rating
4.83
P
PrintablesMikeVB

Milwaukee String Trimmer Mount

For handing your Milwaukee Quik-Lok string trimmer head. Print at .15-.2 mm and mount to wall.

Downloads
1,782
Likes
215
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 31 (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,724
Likes
356
Rating
4.89

Ego String Trimmer Holder (updated 30.12.24)

Updated to change print orientation along the diagonal axis and extend diagonal brace into holder cup for greater strength. Can also be printed along top axis with some support. Also fits EGO Power+ Powerhead PH1400 Printed 0.4 nozzle, 4…

Downloads
1,696
Likes
181
Rating
4.82
P
PrintablesMaxT

Christmas Door Trim Corner 52 - Christmas Tree and Merry Christmas (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
1,595
Likes
333
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 63 - Christmas Stocking etc (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
1,586
Likes
389
Rating
4.94
P
PrintablesEmanCarrillo

Pottery Trimming Spinner

Few different foot options for the spinner. The bearing is a 6202z. Use a shielded bearing as clay is less likely to get inside it. Bearing Link: https://amzn.to/3dmfFt0 including STEP for you to modify to your liking.

Downloads
1,573
Likes
232
Rating
4.5
P
PrintablesMaxT

Christmas Door Trim Corner 27 - Santa Sleigh and Reindeer and Snowflake (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,566
Likes
346
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 23 - Santa Sleigh and Reindeer and Gifts (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,495
Likes
328
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 10 - Gnome (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,485
Likes
289
Rating
4.81
P
PrintablesMaxT

Christmas Door Trim Corner 26 - Bell (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,341
Likes
218
Rating
4.88
P
PrintablesMaxT

Christmas Door Trim Corner 30 - Christmas Nativity Birth Of Jesus Mary Joseph Shepherds (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,325
Likes
274
Rating
5
P
PrintablesBrad

Trim removal tool

easy to print trim tool

Downloads
1,296
Likes
126
Rating
4.8
P
PrintablesDylan Kirby

Apache 2800 single polk 6x9 speaker grill and trim

Designed for the Apache 2800 case, for one Polk DB692 DB+ Series 6" x 9" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 12 m4 heat set inserts, and is mounted with 12 m4x8mm screws.…

Downloads
1,206
Likes
105
Rating
5
P
PrintablesMatt Richardson

Automotive Trim Clip Assortment (TPU Only)

These are for TPU only, they don't work well with hard filaments because they are completely ridged if you don't print TPU. These are very robust and will fit most vehicles. I have a bunch of sizes and you can mix and match and just print…

Downloads
1,204
Likes
527
Rating
5

Philips Multigroom 7000 Trimmer + Accessories Organiser (MG7715/65)

An aesthetically pleasant organiser that fits the (MG7715/65) Trimmer and all its accessories Designed to print super easy, just make sure the bottom is oriented to the print plate.

Downloads
1,183
Likes
424
Rating
4.86
P
PrintablesMaxT

Christmas Door Trim Corner 64 - Snowman and Ice skates and Christmas Tree (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
1,174
Likes
278
Rating
5
P
PrintablesNiko

Automotive trim removal tool / Pry tool

These small pry tools are designed to help you remove plastic trim pieces from your vehicle without causing damage. Using these tools can ensure that the trim pieces come off in one piece. There are two versions of this tool: one with a…

Downloads
1,168
Likes
175
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 15 - Merry Christmas and Christmas Hat (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,152
Likes
247
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 24 - Christmas Nativity Birth Of Jesus Mary Joseph Shepherds (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,147
Likes
203
Rating
5
P
PrintablesParra

Stihl Trimmer Holder

A simple line trimmer holder - mine was made for a stihl, but it would suit a bunch of others. I printed mine in a basic orange PLA and it has held for over 6 months with a straight shaft trimmer on it with no dramas.

Downloads
1,116
Likes
95
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 14 - Christmas Nativity Birth Of Jesus Mary Joseph Shepherds (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,106
Likes
198
Rating
4.89
P
PrintablesRynok

ESP32-WROOM-32 (USB-C) Box with Lid, Trimmed

Snap-fit closure for ESP32 board, with pins available for prototyping purposes. This remix of the existing model removes the material between the pins inside the box. Printed beautifully using Inland PLA+ with a 0.5mm nozzle at a 0.28…

Downloads
1,090
Likes
91
Rating
4.8
P
PrintablesMaxT

Christmas Door Trim Corner 21 - Snowman and Snowflakes (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,061
Likes
200
Rating
4.7
P
PrintablesMaxT

Christmas Door Trim Corner 29 - Snowmen (3 x Snowman) (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,045
Likes
192
Rating
4.88
P
PrintablesMaxT

Christmas Door Trim Corner 33 - Holly and Red Berries (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- UPDATE 4th Dec 2022: MMU version is now available. Look under Files for the 3MF file :) Thanks, Jon ! ---------------------- 4mm thick to ensure stability The model will fit on…

Downloads
1,031
Likes
239
Rating
4.73
P
PrintablesMaxT

Christmas Door Trim Corner 37 - Merry Christmas and Holly and Red Berries (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,010
Likes
177
Rating
4.43
P
PrintablesIdea Prints

Christmas Door Trim Corner - Santa claus #4

Christmas Door Trim Corner - Santa claus🎅 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…

Downloads
1,004
Likes
180
Rating
5
P
PrintablesMwirenfeldt

Ryobi Hedge Trimmer Holder

Holders for OPT1845 2 pcs OPT1845 31mm Holder 1 pcs OPT1845 Holder for OHT1855R 1 pcs OHT1855R ensure enough perimetes. i used 5 for OHT1855R and OPT1845

Downloads
986
Likes
139
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 35 - Snowman (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
977
Likes
174
Rating
5
P
PrintablesNeven3D

Brushcutter/Grass trimmer hanger

Simple hanger for your brushcutter. Tested for echo srm-222es. Printed in PETG at 20% infill No supports needed if printed in default orientation Needs 4 screws for mounting

Downloads
929
Likes
232
Rating
5
P
Printablesda-mkay

Edge Banding Trimmer / Cutter

I like the idea of JMAW's Edge Banding Trimmer . Unfortunately it did not work that well for me. I wanted a model, where the blade can be fixed directly to the model using some screws and nuts, instead of having a clamp. Because in the…

Downloads
923
Likes
192
Rating
5
P
Printablestobias

Ryobi trimmer holder

Holder for Ryobi trimmer Print instructions Print in PETG or PLA.

Downloads
921
Likes
149
Rating
4.67
P
PrintablesMaxT

Christmas Door Trim Corner 09 - Snowflakes (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
885
Likes
165
Rating
5
P
PrintablesKPTexan

Cartridge Case Trimmer

18AUG22 Update - Uploaded .243 Win and 7.62x54R bushings 11NOV21 Update - I just uploaded the 6.5x55 Swedish and .22-250 Remington bushings. I've also uploaded a generic .dwg of how I design each of these bushings (6.5x55S is in this…

Downloads
883
Likes
120
Rating
5
P
PrintablesDan Vaas

Ender 3 V2 Trim

🌟 Enjoyed this 3D model? Share your creation! 🌟 If you’ve printed and loved this design, I’d be thrilled to see your make! Post a photo so I can celebrate your creativity. Your feedback and support inspire me to keep designing more…

Downloads
831
Likes
150
Rating
4.75
P
PrintablesIdea Prints

Christmas Door Trim Corner - Gingerbread #6

Christmas Door Trim Corner - Gingerbread🍪 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…

Downloads
825
Likes
176
Rating
5
P
Printablesmuchtall

Nissan Door Panel Trim Clips

(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) Replacement inner door trim clips for a Nissan NV3500 (and probably other Nissan models). I made two variations, one with thicker clips, and one with…

Downloads
800
Likes
65
Rating
0
P
PrintablesPhil M

car trim tool mod

Modified to print without supports. Remove web after printing Category: Hand Tools

Downloads
794
Likes
83
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 36 - Snowman (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
786
Likes
134
Rating
4.77
P
PrintablesMaxT

Christmas Door Trim Corner 56 - Christmas Tree and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
782
Likes
174
Rating
5
P
PrintablesRobert Hall

Flashforge AD5X/AD5M enclosure bottom trim

Noticed that whenever you print the enclosure your alway left with the bottom part below the door being black and not matching the rest….. So I gave quickly designed a bottom trim to go over it, I did recess some holes into it for magnets…

Downloads
774
Likes
153
Rating
5