Fugenglätter/ silicone trowel
Perfekt für Silikon Fugen glatt zu ziehen. Perfect for pulling silicone joints smooth.
- Downloads
- 2,346
- Likes
- 322
- Rating
- 4.96
93 models
Perfekt für Silikon Fugen glatt zu ziehen. Perfect for pulling silicone joints smooth.
Hello, i always have trouble to create nice silicone joints and startet to look for some handy tools. I saw some good tools in wood, but they were very expensive (4€ each size). Good we have 3D printers, so i designed some and tested…
Einfache Fliesenkelle/Zahnspachtel falls man mal ein paar Fliesen verlegen möchte und seine vorhandene gerade nicht findet oder man gar keine besitzt. Abstand der Zähne 3mm, auf Anfrage kann ich auch Variationen davon hochladen.…
Should be useful in planting and potting. Print instructions Print with supports for better inner surface.
This is a super garden tool set - your key to effortless gardening! With three adjustable, print-in-place digging tools, you can now cultivate and nourish your garden with ease. No supports needed, just simple printing. Enjoy your time in…
I needed a new trowel for a long hike, but unfortunately my local outfitter only had expensive trowels in stock. I designed this with hiking/backpacking in mind-- the trowel is lightweight, comfortable to use digging small holes, and can…
I wanted to test my skill at making usable tools, and have created this. This design needs minimal supports, with them only needed under the handle. I used a 25% infill, and it feels nice and strong so I dont see a need to go too much…
Just a modified version on DGA's model.
Needed a outer corner trowel for my garage isolation project. Couldn't find anything that would fit my needs, so I created this. No supports Quick print (around 2 hours) Can be easily printed in .28 layer height to reduce print time…
Ultralight-ish backpacking/camping trowel. Weighs in at 70 grams of material. This is considered V1, will put it through its paces and see where i can shave off some weight, while keeping it robust enough to dig catholes. 3MF file…
you know you have no life, when on a Friday night you stay in a design a glue trowel for work LOL XD updated to v2, has thinner teeth to get into corners better Category: 3D Printing
When floating epoxy coat on a table top its hard to get the perfect thickness. The epoxy will self level but to get it really good you need to have a pretty constant thickness. I found some epoxy trowels online but they were only a few…
simple and strong plastering trowel
A simple 100mm (4"), flat, flexible resin spreader with one flat edge and three notched edges with notch sizes approximately 3.3mm (1/8″) 5mm (3/16″), 6.7mm (1/4″). It's a lot like the similar looking spreaders that you can buy for a few…
Exact angle trowel adjusts to suit the task you are working on from 90 to 160 degrees. Thank you for every review, like and donation, It motivates and helps to implement new projects! Print Settings Rafts: No Supports: No Resolution: 0,2…
I printed this at 0.2mm layer height without any supports. Had to fix the corners on the printer cabinet I'm building with joint compound. This print gave me the perfect rounded corners!
A very simple garden trowel that can be printed without any support and joined without glue. Light sanding may be required on the base grip's top surface depending on how accurately it is printed. The dovetail joint does the trick to join…
Printed in PETG, the float uses KREG square drive screws for mounting the handle, printed on a glass bed for a smooth finish. The trowel's are modified versions of DGA's hand trowel. I added tapers to both ends and made one with a sharper…
Super cool and modern cyber version of the simple gardening trovel. You still didn't print one?
I did some decor tiles in the room. To apply the bond evenly, I needed a tile scraper. I could buy them and use them, but I have a 3D printer so I'll have to make them. It was modeled to be approximately 4 inches by 6 inches in size.
Small lightweight backpacking trowel with teeth on one side and a slot for a clip.
I designed this with a minimalist vision in mind. The holes reduce weight slightly and allow for clipping or cord usage as you like. The asymmetrical design leaves one side smoother for comfort, while the other is hooked for light-duty…
In order to protect our wilderness, human waste should be deposited in catholes dug 6-8 inches deep at least 200 feet from water, camp, and trails. This is difficult to do with sticks or hands, so I recommend this trowel. Due to it's…
measures 3 inches tall 10 inches long and 2 inches wide.
This is a tool for surveyors and other people who have to dig out pits, services and similar small holes in the ground. Can also be used as an enormous ice-cream scoop. :P
The model is not very beautiful designed, but well, it has to be functional, not beautiful. I haven't tried it myself, its for a friend, if i know that it works, ill write it here. But until then: Printing at your own risk hahaha. If the…
175mm notched trowel for large format tiles, with hook 8*8mm spacing 3-4 Top / Bottom Layers 3-4 Perimeters
silicone trowel / Silikon Glätter / different sizes → Sizes ca. 6mm | 8mm | 10mm | 12mm → 0.4 Nozzle → 0.2 mm Layer Height → 30% infill → TPU → Cleaning →water | paper | toothstick | dish soap → it's not a silver bullet, but it helps to…
A simple model for smoothing silicone joints . Average print time: 17 min. No supports
1.2mm thick. Notches are 2mm 3mm 6mm and 6x3mm. Enjoy 8mm hole for hanging.
Für eine kleine Fläche Fliesen wollte ich keine Zahnkelle/Glättekelle kaufen. Gedrucktes Modell war erfolgreich im Einsatz. Habe verschiedene Varianten mit unterschiedlicher Zahnung hochgeladen. ----------------------------------- I…
I modified DGA's model and gave it tapered ends and a harder edge.
This is a cap specifically designed for the Vargo Dig Dig Titanium trowel. This trowel (as is the case with most titanium backpacking trowels) can be a bit rough on your palms, especially when digging hard or rocky ground. This cap slips…
This is a small hand trowel that prints without supports. Works well for digging small holes and is very lightweight. I printed it in PETG at 0.1mm layer height on a Prusa i3 Mk3 and it came out nicely. I did sand it a bit to make it nice…
THIS IS STILL A WORK IN PROGRESS, ITS NOT FINISHED YET!!
Spatula handle/ trowel or spreader i don't know what's it called, but here it is. Hight. 100mm Wide. 150mm Thooth. 2mm
If you are adding a 45-degree knee-wall, but still need a tool to help with mudding/taping, you can print this one. Hold it flat to fit the 135 degree angle perfectly. Hold at an angle to use the edges independently. I printed mine with…
a 3mm notched trowel / scraper for spreading applying adhesive
Styled on the cheap tools you can get from supermarkets, but this costs about 13p to print and if you break it you just print another :o) Works fine for separating out young seedlings for potting on or planting out in the garden. I used…
I have adapted the idea of SIMBAKATZE to my needs. I had to be able to use double-sided tape to attach it. Thanks Revision 2 Improvement: Better fit between body and wall mount Better cleaning with rounded inside corners Category: Other
Square notches in 1/8" and 3/6" on the 2" sides and optionally ¼" notch on the 3" side.
Flexible spatula for cleaning and treatment of plaster and stucco. Print on PETG with 5 perimeters, 15% infill, Gyroid recommended.
Joint spatula set for silicone and acrylic. Set of square and round pullers. Works great with TPU.
Review, added bag holder Category: Pets
This is a mount for all sized trowels. 10% - 15% infill. countersunk holes for screws.
I was looking for an archaeological trowel to 3D print as a toy , but I could not find any printable models. While searching, I came across a detailed photogrammetry model of a real archaeology trowel , so I decided to adapt it to make it…
I am rebuilding the bathroom in my camp trailer and don’t own a trowel for spreading flooring adhesive so I designed a printable (and disposable) model. Given that it was going to be thrown away I wasn’t worried about it being rather…
Drywall Inside Corner Trowel, Hole Repair, View Hole Cover
A small camping trowel with a short handle for backpacking
A simple trowel for smoothing and shaping cement.
I made this trowel for building sandcastles on the beach. The STL is for my hand size, reduce the scale for children or people with smaller hands. I printed 75% scale for my 7 year old son. I paused the print and changed filaments to get…
This is a notched trowel for the final hard coat of an epoxy table. Made with 1/8" x 1/8" grooves for a smooth and level finish coat. I couldn't find one out in town made of a softer material (don't want a metal one that might leave…
This STL file is designed to create a custom concrete trowel stamp, perfect for adding unique branding or decorative designs to concrete surfaces. The file includes a fully functional base trowel stamp template, allowing you to easily add…
Incorporated feedback from other designs here. Will have to glue handle to top or drill your own screws. It's a 0.25" radius. 1.8" wide, 4" long. Edger side is about 1" deep. Leading edges on both sides are 1/8" chamfer. How I Designed…
This is a 9mm U-notch trowel that I designed for tile trim. It is the equivalent of a 1/4 x 3/8 notch trowel and leaves about a 3/16 (4.76mm) bed of thinset. Here is the A360 downloadable file if you want to customize it to make your own…
I designed this garden trowel for everyday gardening and potting tasks. It features an ergonomic handle for a comfortable and secure grip. The lightweight design makes it easy to use for digging and planting. The model is 3D printable,…
This does what it looks like it does. Fits Naceture Trowel (#1 on Amazon) https://www.amazon.com/gp/product/B09D9RZ71H/ref=ewc_pr_img_1?smid=A31CDLOEH2EGX3&th=1 Features comfortable roll-top end and nubbin detent what for keeping it…
The trowel holsters were designed to hold multiple trowels. Version 3 can be used with a belt but also has a hole that can be used with a carabiner instead. Version 4 only has a carabiner loop. I used TPU, but due to the height of the…
This cap fits over the top of a backpacking trowel to protect your palm from sharp edges. Credit for the idea goes to https://www.printables.com/model/510991-lixada-camping-shovel-hand-protector This model is original, designed to fit the…
A mini trowel I modeled for putting in a tile backsplash.
Kelle um in dem Glas ganz unten an das Pulver zu gelangen und Tamper fuer Nespresso Caps Wiederbefüllbare Nespresso Kaffeekapsel aus Edelstahl zum Nachfüllen - Wiederverwendbare Refill-Kapsel für umweltbewusste Kaffee-Liebhaber kompatibel…
Potřeboval jsem rychle obložit kus zdi a nebyl čas shánět všechno potřebné vybavení v obchodě. Tak jsem si hřebínek na obklady navrhl a vytiskl. Průměr i výška zubu 5 mm. Na takové to domácí žvýkání celkem v pohodě. [ENGLISH] I needed to…
Eine Maurer Kelle für den Feuerungsbau. Noch nicht getestet. Würde ASA oder ABS zum drucken empfehlen.
A mini plastering trowel can be used in modeling for applying, spreading, and smoothing materials like putty, filler, or
I needed to repair some stairs but, since I don't plan on doing it ever again, I didn't want to buy an edge trowel. So I designed and printed one. It worked great.
A sandbox trowel I've been iterating on for my kid. It's been getting regular use at the playground with a range of kids (aged 1-6yo) and durable enough so far. The overhangs are set so it can be printed without support on MK4S with only…
It is 2 pieces that should fit on a 3d printer with a print bed at least 8"x8". You will need to split the file inside of your slicer. The blade attaches to the base using 3 M6 screws. The ones I used were 16mm long. There are hexagonal…
Double-ended trowel used to spreading thermal or solder paste onto either a PCB. PCB Stencil or a CPU. Two separate files one with the label of our website and a second unlabeled one. Dimensions: 122mm x 24mm x 5mm
I have created a small trowel designed to ensure a precise distance between the bottom of the tile and the surface of the plaster (eg https://www.pinterest.it/pin/21532904457891450/ ). This tool ensures a uniform and leveled plaster…
Needed a narrow trowel for adding thin tiles along the edge of the floor. Standard notched trowel was too large to fit 8x8mm notches 72mm wide Printed in PETG
Features: Ergonomic Handle: Comfortable grip designed for steady single-handed passes. Precise $90 Angle: Formed specifically for smoothing external wall corners without sagging or distortion. Functional DIY Design: Perfect for quick home…
The example was printed in PET-G. You can use a socket head bolt and nut to hold the metal part in place.
A trowel to make levelling the soil in your microgreen trays. The trowel has two dowels the fit into holes located at the bottom. The dowels in the file can be sized to the height you require by simply changing the z height in the slicer.…
Plastered external corners with a radius are less prone to chipping. This trowel makes the process much easier.
3D‑модель для работы с бетоном (concrete trowel), мастерком или гладилкой для бетона.
If you are installing a Schluter Ditra-Heat floor system (or any radiant heated floor), you know the anxiety of spreading thinset over those expensive heating cables. One slip with a sharp metal trowel can nick a wire and ruin the entire…
just needed the original model to be a little longer to speed up application.
The model is a small gardening shovel. For longest usage i suggest using materials like PETG and ASA because of there strength water resistance and sunlight protection. You may have do add some supports for your model to print best. I…
Flexible spatula for cleaning and treatment of plaster and stucco. Print on PETG with 5 perimeters, 15% infill, Gyroid recommended.
Needed a narrow trowel for adding thin tiles along the edge of the floor. Standard notched trowel was too large to fit 8x8mm notches 72mm wide Printed in PETG
Double-ended trowel used to spreading thermal or solder paste onto either a PCB. PCB Stencil or a CPU. Two separate files one with the label of our website and a second unlabeled one. Dimensions: 122mm x 24mm x 5mm
just needed the original model to be a little longer to speed up application.
If you are installing a Schluter Ditra-Heat floor system (or any radiant heated floor), you know the anxiety of spreading thinset over those expensive heating cables. One slip with a sharp metal trowel can nick a wire and ruin the entire…
It is 2 pieces that should fit on a 3d printer with a print bed at least 8"x8". You will need to split the file inside of your slicer. The blade attaches to the base using 3 M6 screws. The ones I used were 16mm long. There are hexagonal…
This is a cap specifically designed for the Vargo Dig Dig Titanium trowel. This trowel (as is the case with most titanium backpacking trowels) can be a bit rough on your palms, especially when digging hard or rocky ground. This cap slips…