Search results: tuk

Sort order

150 models

P
PrintablesColin

Tukkari TLX Exhaust fan Modification

Modification for Tukkari TLX (Prusa Mini) enclosure, stops the rear extractor fan from touching any walls, giving space for the fan to work and not be obstructed. Print Settings Printer Brand: Prusa Printer: Mini Rafts: No Supports: No…

Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant

Downloads
120
Likes
17
Rating
5
P
Printablestg73

Slot cover for Tukkari TLX MK3S+MMU2S enclosure

Covers the slot in the top face of the Tukkari TLX MK3S+MMU2S enclosure, allowing one of the MMU2S feeds to be accessed from the top of the enclosure. I have a dry box holding the four filaments which I use most often, and I use the 5th…

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
73
Likes
12
Rating
5
P
PrintablesMrGira

Fan Duct for Tukkari TF Acrylic Enclosure - 120mm Fan to 100mm Pipe adaptor

Materials and specifications: PETG or ASA/ABS reccomended; 0,2 layer height; 5 perimeters/shells; 120mm fan ( personally I used this https://amzn.eu/d/gUrk2gO plugged into an octopi ); 4 M4x40 hex screws; Assembly Mount a 120 mm fan…

Print approx. €2.99–€3.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
68
Likes
13
Rating
0
P
PrintablesObiWanJabroni

Tukkari Prusa Enclosure Top Slot Cover

Keeps foreign object from falling down to print bed, acts as a filament guide, and helps create negative pressure within the case while an exhaust fan is running. There is a little endplay in the slot to allow for the filament to be able…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
62
Likes
11
Rating
5
P
PrintablesMike Ant

Mintion Beagle camera mount for Tukkari enclosure

I've been thinking for a long time about how I'm going to mount my new Mintion Beagle camera into the Tukkari box. All the models of holders that would have been considered were unsuitable for this application, plus they required the use…

Print approx. €1.46–€1.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
57
Likes
5
Rating
0
P
Printablesfedererj

Tukkari TS Mini Filamentspalt Blende Filamentslot Cover

Blende für den Filamentladespalt des Tukkari TS Druckergehäuses.

Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
50
Likes
4
Rating
4
P
Printables100prznt

Tukkari TLX Air Outlet Cover

This cover makes it possible to place the Tukkari case very close to a wall and still be able to use the ventilation. The cover is designed for the use of an inside mounted fan. The profile of the air deflector as well as the spacers is…

Print approx. €4.40–€5.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
9
Rating
0
P
Printables100prznt

LED Bar for Tukkari Enclosure

With this holder a simple LED profile can be mounted simply and inconspicuously in the Tukkari TLX enclosure. The cable is passed out the bottom of the holder and can be routed along the edge in the TLX enclosure. Material I use a black…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42
Likes
13
Rating
0
P
Printablesfedererj

Filter Case Tukkari Mini 60mm Fan

Printing materials like ASA forced me to install a filter on my tukkari enclosure. Missing a model for any stock air filter, I designed it by my self. You also need m3 nuts an screws to mount it on a fan or enclosure.

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42
Likes
10
Rating
0
P
PrintablesThomas

Fan Case for Tukkari Enclosure

I wanted a fan in my tukkari enclosure which blows cool air directly into the ventilation slots of the power supply of my MK3S+. Mounted with snap in.

Print approx. €1.68–€2.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
41
Likes
7
Rating
5
P
PrintablesDD3D

Tukkari TS Enclosure LED, Camera and Pi system

This is my Enclosure system for the Tukkari TS enclosures (should fit the MINI or MK3 versions). I included zip tie holes in many locations to keep things as tidy as possible. All original design files included as STEP so ready to remix.…

Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
41
Likes
14
Rating
0
P
PrintablesTom

Durchgang für Filament in Tukkari

Ich nutze den Drucker mit MMU in einem Tukkari Enclose. Für die fünf Filamente der MMU sind Durchgänge vorhanden. Da ich aber für bestimmte Drucke (z.B. TPU) die MMU ausschalte und den Bypass der MMU nutze, brauche ich eine weitere…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
39
Likes
9
Rating
5
P
Printableswoelpi

Tukkari TLX enclosure intake manifold

I designed this two piece intake manifold to suck hot air at the top of the enclosure out of the Tukkari TLX MINI enclosure. It clears the PRUSA MINI and should in theory prevent that you get strong drafts when using the fan. The fan is…

Print approx. €2.96–€3.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
39
Likes
11
Rating
5
P
PrintablesTom

Halter für PSU-Lüfter im Tukkari Enclose

Die Temperatur im Tukkari liegt bei PLA und PETG eigentlich immer unter 40°. Auch das Netzteil war bisher maximal handwarm. Trotzdem habe ich einen 40mm USB-Lüfter angebracht, um bei höheren Temperaturen die PSU zusätzlich kühlen zu…

Print approx. €2.61–€3.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
5
Rating
5
P
PrintablesPlutohorlyck

Stuka lithophane

The Stuka (short for STUrzKAmpflugzeug) first took to the skies in 1935, and tested in the Spanish civil war. In WW2 they fitted some models with a siren, named “Jericho's Trumpet" which struck fear in the enemy. It was likely the nazis'…

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
7
Rating
0
P
PrintablesLudo B

Opzet stukken voor festool in smallere spleten te kunnen stofzuigen. Attachments for festool vacuuming in narrow crevices.

Opzetstukken voor de festool-stofzuiger, zo kom je ook in de kleinere kieren. Attachments for the Festool vacuum cleaner, so you can also reach into smaller cracks. Groeten Ludo

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
0
Rating
0
P
PrintablesMM

Stuka Ju-87 B2 kit card

can be printed together the model needs to be glued together or separately in other colours can be printed without support the Stuka is very realistic Print in place kit card , Assembly required

Downloads
1,092
Likes
194
Rating
4.5
P

Ju-87B Stuka Kit Card

The Junkers Ju 87 Stuka is a German dive bomber that was introduced in 1936. The Stuka is two-seater, single engine, dive bomber. The Stuka took part in the Spanish Civil War, Invasion of Poland, Dunkirk Evacuation, France, and the Battle…

Downloads
644
Likes
130
Rating
4.71
P
PrintablesZenlayne

Ju 87 Stuka kit card - Famous planes

Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Ju 87 “Stuka” This is another plane for your collection : the infamous Ju 87 “Stuka”.…

Downloads
559
Likes
100
Rating
5
P
PrintablesBlack Jack

Yellow Tuk-Tuk/ Auto Rickshaw with Movements Version 2

Upgrades From Version 1 The Body Panels are seperated. The Roof is seperated. Seats and Light seperated Interference issues corrected. Other Minute structural changes. There are three ways to print this. As single piece :- Please download…

Downloads
519
Likes
46
Rating
4.33
P
PrintablesFuganater

Modern Key Hanger Fobs (Scooter/Tuk Tuk/Minivan/Motorcycle/House)

I imported the fob into Fusion 360 and added some simple designs to easily identify what each key was for. For me this was an electric scooter, minivan and a tuk tuk. I have included a .f3d file so you can more easily make your own!…

Downloads
510
Likes
258
Rating
0
P
PrintablesBlack Jack

Yellow Tuk-Tuk/ Auto Rickshaw with Movements

To view updated version of this model please click here. There are three ways to print this. As single piece:- Please download the STL but there wont be any movements. As nine or ten pieces :- Please download file ending with combined.3mf…

Downloads
259
Likes
25
Rating
5
P
PrintablesBorecPepik

junkers ju-87 stuka model plane

Model of Junkers Ju-87 Stuka dive bomber. No supports needed.

Downloads
196
Likes
17
Rating
0
P
PrintablesClac

TukTuk/Ape 50 Cillouette

I made this cillouette of my piaggio ape 50 or tuktuk as it would be called here in Denmark. Made in fusion 360.

Downloads
104
Likes
7
Rating
0
P
PrintablesDahan Meir

Esh Sheli Tukad - Rabi Nachman Bresslev נ נח נחמ נחמן מאומן

The well-known saying of Rabbi Nachman of Breslov, which means "My fire will burn until the coming of the Messiah." 3D model. Made with Blender. Common among Breslov Hasidim. If there is demand, I will make more products from it.

Downloads
90
Likes
8
Rating
0
P
PrintablesColin

Tukkari TS Prusa Mk3s cooling enclosure duct for PSU V2

Version2: This is a remix of my previous Tukkari TS vent to PSU shroud duct ( https://www.thingiverse.com/thing:4738537 ), this time its adustable so if you have a paver in the enclosure, the part still provides full performance for…

Downloads
88
Likes
14
Rating
5

World of Warcraft inspired, Ottuk, Tabletop DnD miniature

IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! World of Warcraft inspired, Ottuk, Tabletop DnD miniature 50 mm Large base which can be used for DnD and other…

Downloads
85
Likes
21
Rating
0
P
PrintablesPrint4Fun

Magnetic hygrometer holder for some enclosures (like Tukkari)

It's a simple holder for a cheap round hygrometer with 2 magnets (10 x 3 mm). Like this hygrometer:…

Downloads
73
Likes
14
Rating
4.5
P
PrintablesMathew

Addons for a Tukkari TLX enclosure

I found out that an enclosure isn't only good for printing ABS / ASA or protecting the printer from dust, but it also can be used to organize things you need for 3D printing. I used the sides of the Tukkari TLX enclosure to attach…

Downloads
73
Likes
23
Rating
5
P
PrintablesGpower-Design

LED Rail for Tukkari case Prusa MK3S

Led rails for tukkari case of Prusa MK3s The file "LED Rail.stl" can be modified in lenght for your case. Link for LED: https://amzn.to/3ub1vkx

Downloads
72
Likes
14
Rating
5
P
PrintablesColin

Tukkari TS Enclosure Prusa Mk3s PSU Shroud with Fan

Extra Prusa PSU cooling for Tukkari TS enclosure. The Tukkari TS enclosure for Prusa Mk3s does not include a PSU shroud between the PSU and honeycombe vent side panel. This accessory in PETG provides a bolt on shroud to direct cool…

Downloads
71
Likes
17
Rating
5
P
PrintablesREIFY 3D

Tukkari TLX PSU vent cover flap

The Tukkari TLX enclosure has a vent that directs fresh air at the power supply. If you have relocated the PSU to outside the enclosure, this vent is redundant. This flap covers the vent, sealing the heat in the enclosure. It is a…

Downloads
66
Likes
9
Rating
4.25
P
Printableskaucukovnik.vi

Requiem - Bartuk Warrior Aegis F

Many poses with lighter-armored options and different faces and haircuts.

Downloads
65
Likes
7
Rating
5
P
Printablestrrevvorr

Tuki Game Pieces

Tuki is a “board game” where you race to stack colored pieces to match the pattern on shown on the game card. For one set of pieces you'll need to print: 4 unique “snow” pieces in white 4 different colored pieces (I used red, green, blue…

Downloads
64
Likes
3
Rating
0
P
PrintablesConda

Tukkari 120mm to 92mm adapter (Noctua) (customizable)

I have bought the beautiful Tukkari enclosure and wanted to re-use my existing 92mm Noctua fans from my lack-enclosure. So here is an adapter that fits perfectly to the Tukkari enclosure. You can use some of your 3M screws with a nut to…

Downloads
63
Likes
7
Rating
5
P
PrintablesLord_Syrus

Tukkari Top Slot Cover with Tube Hole

Printed in PLA, 0.3 draft. Grind the inner edges for your desired fit (loose or tight).

Downloads
60
Likes
7
Rating
4
P
PrintablesSuFra

Prusa MK3S+/MK4 Druckblechhalterung - Steel plate holder - Tukkari Gehäuse

Remix des Models von grooveup um den Halter seitlich am Tukkari Gehäuse TF Acrylic zu befestigen

Downloads
59
Likes
9
Rating
0
P
PrintablesNewha

Thai Tuktuk

Thai Tuktuk

Downloads
57
Likes
6
Rating
0
P
PrintablesSaul Industries

Tukkari TLX - 2 Piece Slot Cover with Bowden Tube Fitting

I liked tg73's design, but needed a solid termination for a Bowden tube. In doing so, I had to add bolts and a bottom plate to secure the slot cover. Required Hardware: 4x M3x12 Socket Hex Head Cap Screw 4x M3 nuts (imbedded) 1x PC4-M10…

Downloads
57
Likes
9
Rating
5
P
Printableskaucukovnik.vi

Requiem - Bartuk Warrior Fierce Storm F

Many poses with lighter-armored options and different faces and haircuts.

Downloads
56
Likes
6
Rating
0
P
Printablesderek

Tukkari Spool Roller Spacer

Spacers for the Tukkari spool rollers to keep them aligned and evenly spaced. This is a remix of the roll spacer by Lord_Syrus , with adjusted width to accommodate smaller spools like the plastic Sunlu and others (still works for the…

Downloads
56
Likes
11
Rating
5
P
PrintablesSpider753268

Skrzynka na baterie z pokrywką AA XXL 24sztuki / BiG box with lid for 24 AA batteries

AA battery organizer in the form of a box with a lid for 24 batteries. Check out my other models. Organizer na baterie AA w kształcie skrzynki z pokrywką. Pomieści 24 sztuki. Sprawdź inne moje modele.

Downloads
55
Likes
7
Rating
5
P
PrintablesOliver Cerny

Tukkari Spool Guide

The filament roll never ran cleanly directly on the ball bearings of the filament holder of my Tukkari TF housing. That's why I printed these simple filament roll guides. They fit on the ball bearings of the Tukkari reel holder. I printed…

Downloads
54
Likes
7
Rating
5
P
Printableskaucukovnik.vi

Requiem - Bartuk Warrior Aegis M

Many poses with lighter-armored options and different faces and haircuts.

Downloads
53
Likes
5
Rating
0
P
PrintablesSaul Industries

Tukkari TLX MMU Plug

I wanted to plug the 5 holes of the Tukkari TLX enclosure. This ensures (along with other mods) a more air tight enclosure when printing ASA and ABS or, other, harmful material. Printed in TPU for a flexible piece with a press fit that…

Downloads
53
Likes
10
Rating
5
P
PrintablesJCJ

Filament Spool Holder for Tukkari Prusa Mini Enclosure

I customized the Filler Spool Holder to fit it on the Tukkari Case for Prusa Mini. All parts do not need any support. Printed all parts with 30% Gyroid with Perimeters of 4. You need: 608 skate bearings e.g.…

Downloads
50
Likes
16
Rating
0
P
Printablesgringer

Tukutuku Panel

3D model of a tutkutuku panel (decorated Māori wall panel). This should work well as a cross-stitch template.

Downloads
47
Likes
3
Rating
0
P
PrintablesNusselt

Tukkari Enclosure Stoppers

The stoppers will fit any 4mm thickness enclosure. They are fixed to the desk with two 3,5*200 auto taping screws each. All the measures are in the last picture. Printed with PETG, 0,15mm layer, 5 perimeters, 20 upper & lower monotonic…

Downloads
44
Likes
8
Rating
5
P
Printablessulli18

Tukkari TS Enclosure Thermometer/Hygrometer Corner Brackets

The Tukkari TS enclosures are missing a thermometer/hygrometer mount like the TF enclosures, so I designed this bracket from the Tukkari STEP files to require no additional holes. This bracket should work on any of the Tukkari TS…

Downloads
42
Likes
7
Rating
4.5
P
PrintablesJiltedGeek

Tukkari PSU shroud for the Prusa Mk3s+

I created this PSU shroud in Fusion 360. I was inspired by Colin Hill from the UK, but I wanted a shroud without the fan option and also a barrier that stops the shroud from moving down, by using the top of the PSU to stop it. I printed…

Downloads
40
Likes
3
Rating
4
P
Printableskaucukovnik.vi

Requiem - Bartuk Shaman Violent Flame M

Many poses with lighter-armored options and different faces and haircuts.

Downloads
39
Likes
5
Rating
0
P
PrintablesLord_Syrus

Spool roll spacer for Tukkari Case

Keeps the two separate spool roll filament holders together

Downloads
38
Likes
4
Rating
4.67
P
PrintablesSpider753268

Skrzynka na baterie AAA z pokrywką na 35 sztuk / BiG box with lid for 35 AAA batteries

AAA battery organizer in the form of a box with a lid for 35 batteries. Check out my other models. Organizer na baterie AAA w kształcie skrzynki z pokrywką. Pomieści 35 sztuk. Sprawdź inne moje modele.

Downloads
38
Likes
3
Rating
0
P
Printableskaucukovnik.vi

Requiem - Bartuk Shaman Sentimera M

Many poses with lighter-armored options and different faces and haircuts.

Downloads
36
Likes
5
Rating
0
P
Printablesbooshi

Tukkari PTFE Guide

A simple PTFE guide/holder for a Tukkari enclosure. Needs an M4 screw that is slightly longer than what comes with the enclosure.

Downloads
36
Likes
7
Rating
5
P
PrintablesConda

Tukkari Raspberry Pi 7inch Display mount

A simple remix of the Plate mounting bracket for 7" touchscreen case so it can be mounted on top of the Tukkari Printer enclosure. I printed it with Polyterra PLA and it works pretty good. No special settings needed.

Downloads
35
Likes
3
Rating
0
P
PrintablesMeister Edel

PTFE Tube Slider for TUKKARI Enclosure

Heyho This is a Slider I designed for my TUKKARI Enclosure. I had quite some problems with my enclosure because the Z Calibration (& Homing) failed each time with my MK4 when also using PTFE tubes to the printer directly. The tubes always…

Downloads
35
Likes
7
Rating
0
P
PrintablesJCJ

LED Holder for Tukkari enclosure

Tukkari Holder without drilling and gluing. The Holder is divided into two parts, the adapter for mounting within the Tukkari enclosure and the LED Profile Adapter. You need: 2 x M4 square nut 2 x M4 screw 4 x M3 countersunk screw 4 x M3…

Downloads
33
Likes
8
Rating
0
P
Printablesherkail Çakal

The mausoleum of the Sultan of the Seljuk Empire " EMIR SALTUK " . grave in Erzurum

The mausoleum of the Sultan of the Seljuk Empire " EMIR SALTUK " . grave

Downloads
32
Likes
3
Rating
0
P
Printablesdvae83743

Tukkari TLX - Bottom Piece Slot Cover

only modded the bottom part added holes for the M3 nuts to be inserted after print is completed widened the bottom to increase it's overall footprint (thought it would be helpful as it felt a bit thin)

Downloads
32
Likes
2
Rating
0
P
PrintablesHh

Kaarituki

Kasvilavan kaarituet Sähköasennusputki 20 mm

Downloads
32
Likes
10
Rating
0
P
PrintablesPatrik Jaššo

Bionicle Rhotuka Spinner

This model is inspired by the iconic Rhotuka Spinners from the 2005 BIONICLE era. It recreates the recognizable circular frame and three-blade design that made these spinning projectiles one of the most memorable features of the BIONICLE…

Downloads
31
Likes
3
Rating
0
P
PrintablesHAL_9000

Tapo c200 C210 C220 Mount for Tukkari Enclosure

Tapo C200 C210 C220 mount for the tukkari enclosure. Technicaly I've used https://www.printables.com/model/441856-tp-link-tapo-cam-c225-or-c200-wall-mount-screw, but Printables doesn't allow this due to licence issues which I don't…

Downloads
29
Likes
2
Rating
0
P
PrintablesDinoPrint

Tukkari TLX Spool holder

Remix of the "Universal Spool Holder" by butchja (https://www.thingiverse.com/thing:2070272) to fit the Tukkari TLX enclosure (replacement of stock 10 mm spool rod) Parts: M8 threaded rod (134 mm length) 2x M8 self locking nut 2x skate…

Downloads
29
Likes
4
Rating
5
P
Printablesbrookito

Prusa PSU cooling for Tukkari TLX enclosure

I wanted to use the original mounting on the TLX cover, so I adapted the original design so that a vertical shift could also be made on the original parts of the TLX cover. At the same time, I increased the space for the fan to 50 x 50 x…

Downloads
29
Likes
1
Rating
0
P
PrintablesCor ten Hoor

Kweekkastje hoekstukken voor aluminium profiel

Kweekkastje hoekstukken voor aluminium profiel

Downloads
28
Likes
0
Rating
0
P
PrintablesZurdoRod

Tuki game pieces

I had to sand the colored pieces. Infill: 20% worked for me. If you want them to be more heavy, you can increase the infill. A friend has the original game and said my pieces were more stable. I made an Android app. If you're interested…

Downloads
28
Likes
0
Rating
0
P
PrintablesNiclas S

Tukkari TLX (two screw new Version) PSU Fan Duct for 40 mm Fan

Remix of Colin Hills Design (@Colin) for the new Version of the Tukkari TLX V2 has two cable slots for the noctua

Downloads
27
Likes
7
Rating
4
P
Printables20Nightfly00

Tukan (toucan) Cutter

Ich habe einen Tukan Plätzchenausstecher für euch gemacht, viel Spaß beim ausdrucken und Plätzchen backen. I made a toucan cookie cutter for you, happy printing and baking cookies.

Downloads
26
Likes
4
Rating
0
P
PrintablesDaniel S

Sliding PTFE connector adapter for Tukkari TF enclosure

This is a small sliding clip to mount a PTFE connector to the Tukkari TF enclosure. I use it as an inlet for a PTFE tube connecting my eSUN eBox dryer. PLA+ works good for this print, slides nicely without grabbing the acrylic. Print the…

Downloads
26
Likes
8
Rating
0
P
Printables100prznt

Ball bearing spool adapter for Tukkari holder

A matching filament spool holder belongs to the noble Tukkari case. However, the 1 kg Tukkari holder has a definite disadvantage in my eyes. The very thin shaft is not on bearings, so it happens quickly that the spool shakes when it is…

Downloads
25
Likes
2
Rating
5
P
PrintablesRiaDesign

Stylised Stuka model airplane

As my first CAD project, I decided to make a model of the Stuka dive bomber. I have no background in CAD so please share any feedback you might have as I am bound to have made mistakes. Printing instructions: For the propeller and fin, i…

Downloads
23
Likes
2
Rating
0
P
PrintablesGpower-Design

Heater for Tukkari Case MK3s+

I've had the issue that i had not enough temp in my tukkari-Case, beause i'm printing in a room with 16 degree. For printing ABS I wanted to have at least 40 degree, with the heater I have now 40 degree in 7 minutes. So i designed a…

Downloads
23
Likes
8
Rating
4
P
PrintablesMichal Pešek

Tukkari enclosure stopper

Simple stopper for Tukkari enclosure box. I recommend use if your box stand on smooth surface. Stopper is fixated with double tape on surface.

Downloads
23
Likes
3
Rating
0
P
Printablesbobasaurus

TUKKARI TLX Prusa MK3/MK4 Enclosure SUNLU S1 Plus Filament Dryer Mount

This is a two-part bracket (for easy printability) for securely mounting a SUNLU S1 Plus filament dryer on top of a TUKKARI TLX Prusa MK3/MK4 enclosure. I used to just set the dryer directly on top of the enclosure, but it would always…

Downloads
23
Likes
8
Rating
0
P
Printablesc.eycan

KOLTUK AYAĞI

BOYU 121 MM DİLİMLEYİCİLERDE BOYUTLANDIRABİLİRSİNİZ

Downloads
22
Likes
0
Rating
0
P
PrintablesJBE

Fan case for Tukkari TS Acrylic

Got inspired of Thomas fan case, but I wanted one on the outside of my Tukkari TS Acrylic enclousure.

Downloads
22
Likes
2
Rating
0
P
Printablesquantenquark

Adjustable Camera Mount for Logitech C270 / Corner Rail for Tukkari enclosure

I like the adjustable camera holder, especially as I was not satisfied with the focus of the C270 while mounted to the Z axe. So I modified the slider so that it fits into the corner of my enclosure using 3M double sided assembly tape.

Downloads
22
Likes
1
Rating
0
P
PrintablesJiltedGeek

Camera mount for Logitech C270 in a Tukkari TS enclosure

For my Tukkari TS model Prusa enclosure I created this camera mount to place my Logitech C270 webcam in the middle above the door, inside the enclodure with a clear view of the print bed. I printed in 0.2 layer height, 25% infill and no…

Downloads
22
Likes
3
Rating
0
P
PrintablesHrvTagz

Holster wing/claw & wedge for DeSantil Slim-Tuk

Holster wing/claw & small wedge for a DeSantil Slim-Tuk. Wing has a slight opening to slide onto the belt clip and the wedge is slightly contoured to sit flush along the back of the holser. The wedge pictured is held by a small command…

Downloads
21
Likes
3
Rating
0
P
PrintablesMike Ant

Tukkari TS box - sliding vent shutter / posuvný uzávěr ventilačního otvoru

The printer enclosure from Tukkari TS is simple and inexpensive. It is equipped with a ventilation hole with a cover. Unfortunately the cap is difficult to remove, so I invented a sliding cap. When I print PLA material I open the cap,…

Downloads
21
Likes
2
Rating
0
P
PrintablesAndyK

Griff Tukkari Einhausung

Griff für die TUKKARI Einhausung Ankermake M5

Downloads
20
Likes
2
Rating
0
P
PrintablesJBE

Brackets for Tukkari enclosure

Brackets for Tukkari enclosure

Downloads
19
Likes
8
Rating
4
P
PrintablesAli Tuna Mazi

Büyük koltuk

Kuracak imp

Downloads
19
Likes
0
Rating
0
P
PrintablesMarsupilami78

Tukkari Prusa PSU 40mm Fan

Tukkari PSU 40mm Fan am besten in Kombination mit Prusa PSU Cover https://www.printables.com/de/model/393140-prusa-psu-cover-black-version

Downloads
18
Likes
5
Rating
5
P
PrintablesMichal Pešek

Tukkari sample filament holder

Original part for Tukkari TS Acrylic Enclosure . The holder has no contact with the door. PETG, 3 perimeters, 20prc infill, no suppors. License is the same like original files.

Downloads
17
Likes
0
Rating
0
P
Printablesseek_treasure

Enlarged Feet for Tukkari TS 3D printer enclosure

The enlarged feet allow the enclosure to hang slightly off the edge of your desk, saving space while maintaining stability. This modification is perfect for those with limited desk space, as it helps to optimize your workspace without…

Downloads
16
Likes
2
Rating
0
P
Printablesmikebad

ESP3286+DHT holder for Tukkari Mini enclosure

Used to hold an ESP8266 and DHT thermal sensor to the top of a Tukkari mini enclosure. Attaches to the fan screw without any need to change the screw. The ESP8266 is NOT held down and is in place only by the top of the enclosure (I didn't…

Downloads
16
Likes
2
Rating
0
P
PrintablesBR1ZB3AR.3D

Na Tuk Kong V1 Scale Model

Resize in your slicer to fit desired scale. Supports needed Infill 20~25% Or use Resin Printer to print. (Support Needed)

Downloads
16
Likes
4
Rating
0
P
PrintablesBR1ZB3AR.3D

Na Tuk Kong V2 Scale Model

Resize in your slicer to fit desired scale. Supports needed Infill 20~25% Or use Resin Printer to print. (Support Needed)

Downloads
16
Likes
5
Rating
0
P
PrintablesObiWanJabroni

Forced Air Deflector for Tukkari Prusa Enclosure

After adding a 2" tall concrete block to reduce vibration while printing (which works great BTW), my printer sat higher than before. Due to this, the power supply unit (PSU) was above the cut out of my Tukkari enclosure, and some cool air…

Downloads
15
Likes
3
Rating
0
P
PrintablesVesExc Yohannes

STB INDIHOME HG680P Holder untuk KLIPPER

Print bebeas mau pakai filament apa aja contoh gambar hanya untuk V1. untuk V2 hasinya lubang lebih dekat dengan media pasang.

Downloads
15
Likes
1
Rating
0
P
PrintablesBR1ZB3AR.3D

Na Tuk Kong V3 Scale Model

Resize in your slicer to fit desired scale. Supports needed Infill 20~25% Or use Resin Printer to print. (Support Needed)

Downloads
15
Likes
4
Rating
0
P
PrintablesStegorex

Cores for Tukkari TLX Spool holder

I love my Tukkari TLX case for my MK3S+, but I hate the filament spool holder, the small one, which is usable for 1 kg spools. The axis is way too thin which generates ugly noises when the spool unwinds and puts very much tension on the…

Downloads
15
Likes
1
Rating
0
P
PrintablesHundehirn
Downloads
15
Likes
1
Rating
0
P
PrintablesdarthGinger

Tukkari TLX Camera Mount

I specifically designed this for the Tukkari TLX MMU Prusa MK3/MK4 enclosure with a built in mount for the Unifi G3 Instant Camera. The only additional hardware required is 3x M4 hex nuts that need to be inserted, the original Tukkari…

Downloads
15
Likes
3
Rating
0
P
PrintablesBlümü

Tukkari Enclosure Addons for Creality CR-6 SE

I've created some usefull addons for the Tukkari Enclosure for the Creality CR-6 SE (this one: https://www.tukkari.eu/p/tukkari-tf-creality-cr6-se-enclosure-box-with-combined-air-filter ) The bottomplates I've designed this for a better…

Downloads
15
Likes
4
Rating
0

Tukkari TLX Enclosure Risers

The Tukkari TLX Enclosure Risers are specifically designed to increase the height of the 3D printer enclosure. After adding a concrete slab and a foam pad to reduce noise levels from 3D printing, the printer may end up too close to the…

Downloads
15
Likes
3
Rating
0
P
Printablesinteraubis

ModoriTuk

MODORITUK ENGLISH DETAILS MODORITUK An opensource constructive modular general purpose system, ready for 3D printing Originally created by Daniel Seda Initially 3D modelled in Blender 2.93, it can be edited and modified using any later…

Downloads
14
Likes
0
Rating
0