81 models
I did not find any display cover for my uConsole that I liked, so I created my own. V1 is a bit more rigid than V0, if you need that. There should be enough space to access USB interfaces with the cover on. Print it with the top side…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
clip on lens cover for uconsole by clockworkpi Prints with no supports with flat against build plate
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
Dieses maßgeschneiderte Gehäuse für die ClockworkPi uConsole kombiniert Funktionalität und Vielseitigkeit in einem durchdachten Design. Es bietet genügend Platz für eine leistungsstarke WLAN-Antenne sowie einem praktischen USB-3.0-Hub mit…
Print approx. €2.90–€3.54 excl. taxPreliminary estimate for PETGSource material: PET
external micro antenna mount for uconsole
Clip on screen for uConsole by ClockworkPi. Prints with no supports with flat against build plate.
Hey hello. I made a shroud for the uConsole. Loved the looks of shroud. And here it is. What you need: a Printer (lol) 4 longer screws. I used this M4x6 ones ( Link to AliExpress ) Print settings: You use you prefered settings and speeds.…
uConsole 3D models in OBJ & STEP format (FREE)
A remix of the uConsole micro antenna 0.2 mount model for a countersink screw plus a mount for the other corner.
This is a fixed flip lid cover for the Clockwork Pi's uConsole pocket computer. You will need longer M4 screws than the ones provided (the thread in the body is deep, you have margin) Print Settings Supports: Yes Notes: The cover needs…
Hackergaddets Board Cover Hey hello. Here is a cover for the Hackergadgets antena board. You have the choice between different versions. There is smaller version with SDCard access. And a extended version the covers the slot and power…
This is a lightweight protective armor I designed for my Clockwork Pi uConsole. The enclosure is an exercise in adding additional durability and expansion while trying to maintain the device’s compact and portable nature. The design…
Was a bit nervous about the proximity of the AC1200 board with the solder points for the battery so designed this holder to ease my nerves.
For the screw in the middle which holds the kickstand in place, you will need a M4 x 4 mm threaded insert. And for holding the battery lid in place, you require eight 5 mm x 1,5 mm magnets. Bill of materials 1x Threaded insert: M4 x 4 mm…
Hey hello. Want some protection for your uConsole? Here is bumper for the bottom part. What you need: a printer :) 4 longer screws. I ordered this ones in M4x6 ( Link to AliExpress ) Print settings: Use your prefered settings and…
!! I found that the holder for the SDR is not working fine with the metal wire support, I am changing the model to fit is in a better way !! I am also making a better reinforcement for the antenna holder, it is bending too easily. This is…
Partial cover for this 7-antenna mounting kit for uConsole. Covers front and back and has room to tuck the connecting wires under the front side. Note: not compatible with the stock metal flip-out stand.
The original metal back cover would affect the wifi signal, and the battery capacity that could be installed was small, There is currently no official release of the shell model. so I came up with the idea of designing a printed back…
This is an updated version of my ClockworkPi uConsole Light Armor , now designed to snugly house the Hackergadgets uConsole RTL-SDR/LoRa/GPS/RTC/USB Hub All-In-One Extension Board . (Link:…
I don't suggest printing this unless you use resin or modify the files and adjust for your printers tolerances. I will provide a .step file if you want to take a stab at it. Also, I highly suggest printing model A. Model B can be printed…
Hey hello. Made a version of a backcover for usage of the original RaspberryPi passive cooler. Update: added Version for Hackergadgets CM Carrier Board. What to print: 1x backcover choosen by board Back.stl is for stock ClockworkPi…
Isn't it weird that so many of our devices just have unprotected screens? I get real nervous carrying around my uConsole, even in a bag, because I'm worried I'll hurt it. So here is a protective case that flips up from the kickstand…
4/20/25 update: Added new variant with removable battery compartment plate. Use two M3 heatserts and two M3 6mm flat head screws. 6/16 Update: Added to project parts list in below description. Uploaded beta version of battery pack version…
This is a solid uConsole cover, printed in PLA, and an antenna mod to improve WiFi reception (just applied with double face tape).
This a HackRF case that is made to fit on the backside of uConsole. The case is made to be as small as possible, it will only stick out 12mm from the backside. Make sure the header arrangement of your HackRF board is the same as on mine,…
I love having a small deployable antenna on the uConsole, but as the original mount was secured by only one screw, the whole thing pivots easily when articulating the antenna. Additionally, the wire stand has no place to rest and hangs in…
clockwork pi uconsole mount for external wifi antena
A uConsole case with optional back bracket to match the standard metal bracket height. Cutout for Expansion port and I/O area. Printed in 1h4m on my Flashforge AD5M with 0.6mm nozzle. Printed with 3 walls, 65% gyroid infil, supports…
This is a one-piece remix of the three antenna variant of paragonnov's excellent uConsole Antenna bracket. Unlike the original model, you should not need glue, but you will still need the M4-8mm screws for mounting. This version will also…
This side panel will boost Wi-Fi signal a fair bit by keeping the antenna module from laying flat on metallic surface. It still gives worse signal than using Compute Module 4 Antenna Kit externally and only provides moderate improvement…
model of Clockwork Pi uConsole LTE/No LTE side plate, in case of losing origin plate or wanna place Wifi antenna inside machine body. Inspired by Anbernic RG353M, a all-metal handheld console which has WiFi antenna placed on plastic side…
I needed a way to comfortably hold the uConsole while sitting/laying down, that also allows for easy typing. Update Now with hand sized grips rather than finger sized holes (thanks u/blickblocks). The new version is the -hand files.…
From official website, all parts from uconsole in step file
This is a simple mount for an external Wi-Fi antenna for the uConsole.
I wanted a hardshell for my uConsole, I wanted a way to attach it to my person or baggage, I wanted ways to attach possible add-ons result: Picatinny-railed hardcase with Molle-compatible slits for belts. Upper part of the rail splits…
I printed this with supports (normal, no tree) with inside flat on bed. Bambu PETG HF black Thanks to original creator strt_fnst for a great base model!
Introduction I found two or three other 3D-printable uConsole antenna mounts online. I had initially seen Sn0ren's YouTube video where he linked to his version. It is small and light, and I printed it but discovered a problem: the u.FL to…
UPDATE: added mount alternatives for the HackerGadgets 21700 battery holder Internal seeed studio XIAO ESP32S3 (or similar) mount for uConsole. Best if used in conjunction with the HackerGadgets expansion board or AIO board with the extra…
Micro Antenna mount for ClockworkPi uConsole. The included antenna works but is weak sauce. This mount allows you to install a folding micro antenna that vastly improves reception with altering the form factor of the uConsole. Link to…
Ever wanted to use your uConsole while lazing around? I did. I bought the uConsole to develop small games and demos while lazing in bed after the kids were asleep. I promptly started dropping it on my face alot. This is version 3,…
Slim and modular backplate for uConsole. Plastic material provides much needed boost to the Wi-Fi signal and would allow to hide extra radio components such as the 4G antennae inside the case. The backplate is modular so the parts can be…
First things first, the entire backplate and kickstand are my design and my original model. The antenna mounting parts are from paragonv on makerworld (License: https://creativecommons.org/licenses/by-nc-sa/4.0/ Link to his/her upload on…
This is a foldable WiFi antenna adapter designed for the Clockwork uConsole. The metal body of the uConsole tends to reduce WiFi performance when the antenna is too close to it. This adapter creates extra height between the antenna and…
Bought a small heatsink at microcenter for a raspberry pi and stuck it on the cpu. The window prevents the heatsink from touching and melting the back plastic. This shown example was printed in form futura luminous yellow PLA. Recommended…
*UPDATE - 18-02-26 V2 models added, depth increased to ensure clearance of adaptor board components *UPDATE - 23-05-26 please be aware support bar at the back wont fully close due to the larger battery area Back plate battery area…
The photo has messed up mesh but I corrected it later, I haven't got a chance to print the new mesh yet. Download the lid from https://www.printables.com/model/930844-uconsole-back-cover-with-battery-lid/files This is a remix of and
Mid plate to provide rigidity and streamlined mounting for a larger external antenna. This will require longer M4 screws to mount the back panel. I used M4x6. Includes rear stand replacement since the wire stand will no longer fit.
Have to pull the antenna out of its case, then you get to see how much wasted space comes in rubber duck antennas. I broke the bottom screw housing on mine, but it doesn't affect the antenna, and makes it a bit narrower. You'll need a…
Updates 11 Feb 2025: uPorto_BASE_B Added the BASE_B - the same thing as above, but lower down. It's aligned so that you can easily bridge the two sides enabling more possibilities and better support. Limited space allows for only a 13 x 1…
First revision of my PeakDesign Mobile mount for uConsole. I want to hook up my uConsole to PeakDesign Mobile / Ram setup I have but still retain the original stand which I liked. Printed in PETG 0.2 layer height with 4 round 8x2.7mm…
This is a friction-fit design that helps mount a Seeed Studio Xiao ESP32 inside of a uConsole case. I designed it to be a friction fit so if it's either too tight or too snug, please adjust your print scaling +/- 1% depending on the…
Based on the super versatile Utility Case Double Decker by the amazing MuddyMaker I expanded the width to fit an uConsole by ClockWork, with plenty of space for your heatsink and possible fan You will be using the same fasteners, handle…
Based on the stand from JGM I needed more room to clear the fan when closing and opening the stand. After some attempts, I decide to make if more stable and used a carbon fiber rod (10mm) and M5 screws with self tapping inserts for the…
Currently this backcover works only with the stock CM carrier board. Hackergadgets board has a different CM position.
I has some gripes with the original, so I made some improvements 😁. After recreating the whole model in Fusion 360 (stealing measurements from original), I…. Closed the LED holes to the right of the cooler Made the open source hardware…
M4 - 5mm screws needed for the extra 1mm thickness a 1mm spacer to add an antenna 'block' at the top, bringing the original antenna away from the metal body for better signal keeps the uConsole looking close to stock. the antenna 'block'…
A mix of the uConsole three antenna bracket (one piece) by dandrewe and the Hackergadgets cover for uConsole by the amazing strt_fnst I needed 5 antennas, but I don't use the antenna board from HackerGadgets, instead mine are IFX to…
A remix of m3x's very nice antenna mount.
Fit for the ClockworkPi uConsole. Don't forget to enable supports from the build plate to support the bottom of the HSW attachment points on the back rear that don't sit flush against the build plate.
glue on and struggle less when removing the sd card!
Uploaded V3 file: slight modification to allow the range of motion when the foot is deployed.
Based on the amazing model from Street Finest . A back cover for ClockWork uConsole with passive cooler or, in my case, with fans. You can fit 2 30mm fans inside. It fits the Hackergadgets CM carrier board. I added a lot of holes and…
To fit the uConsole more tightly into the Multi-Size EVA Tools Bag Hard Travel Zipper Storage Box Shockproof Outdoor Tools Bag For Earphone Storage Case Accessories (No. 3 – 20x16x6), two parts were drawn. The parts were laser cut from 10…
Bottom panel, Battery cover and CPU cover for the ClockworkPi uConsole. This is designed to fit my uConsole with 26650 cells and a Raspberry Pi CM5. It is printed in 3 parts - the back panel which replaces the original metal panel of the…
use originals print profile. works great. i painted in the yellow over the plate. but the rest is apart of an svg i added to the surface. easily printable. enjoy and thank you @m3x for the awesome cover
A mix of the uConsole three antenna bracket (one piece) by dandrewe and the Hackergadgets cover for uConsole by the amazing strt_fnst I needed 7 antennas but I don't use the antenna board from HackerGadgets, instead mine are IFX to RP-SMA…
A grille to cover two 30 mm fans togetherfor those using active cooling on a Clockwork uConsole with Raspberry Pi Compute Module 5 This is the original design by IAmDotorg that I tried my best to keep it similar to
A grille to cover a Raspberry Pi Compute Module 5 when using using active cooling on a ClockworkPi uConsole This is the original design by IAmDotorg that I tried my best to keep it similar to
A mix of the 18650 Battery Case by Erikjuh and the Hackergadgets cover for uConsole by the amazing strt_fnst The case holds two 18650 batteries or anything you need, like antennas, cables, tools, et cetera One of the caps is a left-hand…
Ever wanted to use your uConsole while lazing around? I did. I bought the uConsole to develop small games and demos while lazing in bed after the kids were asleep. I promptly started dropping it on my face alot. This is version 3,…
Hackergaddets Board Cover Hey hello. Here is a cover for the Hackergadgets antena board. You have the choice between different versions. There is smaller version with SDCard access. And a extended version the covers the slot and power…
Hey hello. Made a version of a backcover for usage of the original RaspberryPi passive cooler. Update: added Version for Hackergadgets CM Carrier Board. What to print: 1x backcover choosen by board Back.stl is for stock ClockworkPi…
I love having a small deployable antenna on the uConsole, but as the original mount was secured by only one screw, the whole thing pivots easily when articulating the antenna. Additionally, the wire stand has no place to rest and hangs in…
Fit for the ClockworkPi uConsole. Don't forget to enable supports from the build plate to support the bottom of the HSW attachment points on the back rear that don't sit flush against the build plate.
Was a bit nervous about the proximity of the AC1200 board with the solder points for the battery so designed this holder to ease my nerves.
M4 - 5mm screws needed for the extra 1mm thickness a 1mm spacer to add an antenna 'block' at the top, bringing the original antenna away from the metal body for better signal keeps the uConsole looking close to stock. the antenna 'block'…
*UPDATE - 18-02-26 V2 models added, depth increased to ensure clearance of adaptor board components *UPDATE - 23-05-26 please be aware support bar at the back wont fully close due to the larger battery area Back plate battery area…
Partial cover for this 7-antenna mounting kit for uConsole. Covers front and back and has room to tuck the connecting wires under the front side.
A mix of the uConsole three antenna bracket (one piece) by dandrewe and the Hackergadgets cover for uConsole by the amazing strt_fnst I needed 5 antennas, but I don't use the antenna board from HackerGadgets, instead mine are IFX to…
*UPDATE - 18-02-26 V2 models added, depth increased to ensure clearance of adaptor board components *UPDATE - 23-05-26 please be aware support bar at the back wont fully close due to the larger battery area Back plate battery area…
