Universal Cable Holder
V2 ( screw mount ) https://www.printables.com/model/1160799-universal-cable-holder-v2 Tested with Petg
- Downloads
- 33,885
- Likes
- 6,921
- Rating
- 4.93
5,931 models
V2 ( screw mount ) https://www.printables.com/model/1160799-universal-cable-holder-v2 Tested with Petg
Tested with Petg V2: Added a wider base for extra holes and a better tape adhesion
Larger sizes: https://www.printables.com/model/1200632-universal-bag-clips-xl
This Garden Tool Hook is designed to neatly hang garden tools such as brooms, spades, and rakes in your shed or garage. It is made to fit tool handles with a diameter of up to 35 mm , making it suitable for most standard broomsticks and…
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The AMF files of the buildplates are included. The…
After my Simple Universal Phone Stand that got featured I got a new phone. So I made a phone holder version 2 for bigger phones and other improvements. You can print it on the side as shown in the picture. NOTE: If your phone is to big…
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The STL and AMF files are available for download on…
! After printing, remove the small supports on the hinge ! please use my gcode files for printing :)
The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…
Universal Ball Joint. Inspired and modified according to Universal Ball Joint model by DieZopfe (https://www.thingiverse.com/thing:5020323) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: C-TECH…
Overview This is a fully adjustable phone mount using a ball and socket joint compatible with any type of filament requiring minimal support material aimed to be printed with any FDM 3D printer. This mount is designed to be compatible…
Universal Closing Clip for bags and packaging , suitable for closing ground coffee, powdered cream, cappuccino. There are more pocket clips on this page, you can try mine to see if it's right for you! I used the joint from a proven cable…
Skadis Cable Holder, perfect for chargers and other :)
Eine einfache und sehr schnelle universelle Schnellspannvorrichtung für die Wand oder einer anderen Fläche. Diese kann an der Wand und an einem Gegenstand geschraubt oder auch mit einem doppelseitigem Klebeband verwendet werden. Die…
Universal pen adapter for the Cricut maker 3. Includes pen distance tool. works with anything up to the thickness of a sharpie. Pen distance tool rest/snaps on to the rail allowing you set a 3mm distance.
I designed this universal bottle cap opener with a lever-based mechanism for easy opening of water bottle caps ranging from 27-35 mm in diameter . Use 3 perimeters + 30% infill. 🔹 Features: ✅ Ergonomic Lever Design: Uses a simple…
Very useful, this key can be added to your keychain. So, no need to look for a coin anymore. Opens deposit locks without coins or tokens and can be removed immediately. Print settings: Default PETG 0.2mm, nozzle: 0.4mm
Thank you for your interest in the Universal Enclosure Standard Build. All STLs for the Standard Build are below. We also have an additional set of Daisy-Chain and Accessory STLs available on our profile. To purchase the kit for this…
Add a pen. Put the screws. Use the middle screw to lock/unlock the compass . You don't need to overtight the screw to lock the compass. A short pressure should be enough. 2 versions : Plastic point : 100% printed compass. Use a small file…
The disk inside can rotate in 45° increments for maximum hanging options. This version is uses less material and is a little slimmer
Update: redesigned version available here: https://www.printables.com/model/607312-ziptag-v20 ----------------- Introducing ZipTag. Easy and quick to print (5-6min per piece) zip tie style tag. Useful for cables, bags and other items. I…
Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design, and now dual sided to allow for even easier use. Version 2, added on May 4, 2021, incorporates a…
I designed a very large knife block a while back because I have a lot of knives. It was not very popular and I understand why. Not everyone has an insane amount of knives, because not everyone copes with their depression by buying things.…
Key cover with customizable text that uses inserts to work with almost any key . Wall-mounted holder for 4 keys keeps all your keys together. Now includes INSERTs for Schlage (SC1, SC4, SC9), Kwikset (KW1), and Hudson keys as well as a “…
The set consists of 4 series in different sizes.
This is a fully printed and adjustable portafilter distributor for my Sage Barista Express machine, which uses a 54mm portafilter. You need to print it in .1 or less to get the threads working correctly. Use the step file and seperate the…
Magnet of the University of Texas Longhorns Logo. It is designed to fit 6mm x 3mm magnets. Base layer should be white. G-CODE has two layer pauses: 3.8mm: add magnets 4.4mm: color change to orange
V2.0 is available here, the model you are currently seeing is outdated This keycap puller is a V1.0 replica of the Apex 9/Pro. It is a replacement if lost, broken and is compatible with any keyboard . It allows easy and safe removal of…
This mount is designed for standard MOLLE webbing, laser-cut MOLLE , and standard 25mm webbing used on most backpacks. This includes non military packs! Furthermore I used the official apple design guidelines to get the curvature of the…
This is a replacement part based on the WindTech CC-6 Mic Stand Cable Clip for microphone stands and boom poles. My brother has a set of these from Sweetwater they work great. Eventually a couple ended up breaking, so I designed a…
Printing instructions PETG works great, but you can use other materials as well. If you happen to have a spool of (pure) nylon sitting around, go for it. Generic settings for 0.4n and 0.2l work great, just increase the number of…
For mobile phones widths from 70mm to 90mm. Bracket to ventilator are various versions. One version is for horizontal shovels width 16mm and second for width 11mm.Bracket to ventilator is prolonged by 9mm that leans against upper wall…
This drilling jig can be used to drill holes perpendicular to a surface, a rod or a pipe. It is quite easy to adapt to tools from other manufacturers, by modifying the included STEP- or F3D-design files “adapter for your own tool”. The…
Universal (Smart)Phone Stand by PBR Designs Stable stand in every orientation Should fit all smartphones (tested with Samsung Galaxy and iPhone) May not hold tablets (holds iPad Air/Pro horizontally) Printing instructions: 2 walls are…
Universal Tool Handle for Countersinks and Other Tools – Ø4 to Ø16 mm A precise and ergonomic tool handle for countersinks and other tools is essential for clean and controlled manual work. Whether countersinking screws, deburring,…
Universal Gun Rack Idea made for any size, length, shape, also editable for any needs. Can be mounted in any way, shape, or size. editable and customizable complete vertical storage racks. Uses 2 normal #6 drywall screws for the bottom…
Print a piece of Space History Size : 228.6mm x 152.4mm x 1.4mm (Real Size) The Pioneer plaques are a pair of gold-anodized aluminum plaques that were placed on board the 1972 Pioneer 10 and 1973 Pioneer 11 spacecraft, featuring a…
Double Universal Out-front Mount, for Garmin accessories. Use m3 screw/nut to close the fixation. V2 : rework fillet on fixation to the bike Printed in 0.2mm layer height, 20% filling with PLA+
Universal Wall Mounts, mounted using screws 5mm or double sided tape.👍
This is a GoPro mount for all of your accessories. It fits a m5 nut perfectly, no glue needed just hit print and prepare a m5 nut. I made this cuz the ones you buy, break easily when crashing, but these ones I can just print multiple…
Designed with a spacing of 15mm between both hooks and enough space in the “inner” part, this durable razor holder fits most razors i had lying around, as long as they have a slim handle and a broader blade. The clip fits shower walls of…
Description: This is a universal hobby paint shaker I designed to solve a simple problem. Shaking hobby paint. It is designed to be used with a reciprocating saw. It may also work with a jigsaw though I have not tested this and may…
A stand which fits most, if not all the different versions of the bitaxe which are floating around. It shouldn't matter if they come with a usb-c or micro-usb port, the slot is dimensioned so they are accessible for flashing.…
Hello, last revision of He-Man figure. Enjoy the print!
Installs on center bar of peloton bike, see pics. No screws needed, after pushing onto the center bar, it clamps in place using a tapered wedge hidden inside the part called "lock" Holds various phone sizes with a clicky slider that grabs…
There is a new version of this tool. Get it here ! A very useful keychain accesory. Opens all coin deposit locks without the need for a coin and can be removed immediately. This redesign of my original Universal Trolley Coin features a…
Universal Can Lid A universal lid for cans of all sizes – 250ml, 330ml, and 500ml. Printed according to the parameters shown in the attached image. Modified/remixed from the original model – https://www.thingiverse.com/thing:6973930/files…
This is wall mount for the HP USB-C/A Universal Dock G2 Thunderbolt DisplayLink. See link for more details on the dock. https://www8.hp.com/h20195/v2/GetPDF.aspx/4AA7-5549ENW.pdf Printed in PETG, no supports required.
Same as original remix but for spools with thicker walls (thanks to WhatWouldAnEngineerDo for pointing out that cardboard spools are a bit thicker). The first remix is at:…
the screw works fine, its a bit smaller so the worse 3D printers still have a chance to print it well. holds strong , didnt fall at all, looks clean , has a little stop to hold the headphones better so they dont fall off. I prepared the…
Universal notebook stand.
Inspired by the travel coffee holder gimbal from mobiobi , cpenner 's cup insert and NicG s can holder, I remixed this a bit. Made it 100mm deep, with thicker walls for insulation and a drain hole in the bottom (intended used is in a…
Headset mount with screw. Maximum table top height 40 mm.
This universal key is a copie of the Katrin universal key. It works for the following products: KATRIN-SYSTEM Toilettenpapier-Spender (Product 953456) KATRIN Falthandtuchspender S (Product 95310) KATRIN-SYSTEM Handtuchrollen-Spender…
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
This is a remix of Klein CL220/CL390 Clamp Meter Hanger Clip which should work for all these models that I am aware of: CL800, CL900, CL700, CL600, CL450, CL440, CL390, CL220, CL120, MM600, MM400, MM300. There could be more models. If you…
Universal holder for two cell phones. Ideal for placing above a power outlet while charging. Simple and flat design with a recess on the back for mounting with double-sided adhesive tape (e.g.: https://amzn.to/3Zt05iO). Two versions are…
This is a remix on a popular filament clip - https://www.printables.com/model/49667-simple-universal-filament-clip-v2 I use vacuum sealed bags to keep my filament dry and I noticed the bags using the original model started to leak air,…
This is an old design I no longer recommend. Instead I suggest this design . Why is it discontinued? Here are the main problems with rewinders of any kind: Very difficult to tune to keep working A new spool is heavier and requires more…
Here is a multicolor 3d printing technique using one extruder without an AMS on an Ender-3 printer using PrusaSlicer. I'm including the 3mf file along with the STEP and GCODE file as well. Although this is done automatically by having an…
To hang a board onto the wall, you have to pre-drill a 6mm deep hole with a 30mm forstnerbit and screw the mount into your board.
English below. Hier ist ein Remix der auf 80% gescaled vom Orignal ist, um Gewicht und Platz zu sparen. Dieses Stativ ist ideal für reisen mit kleiner Fotoausrüstung ohne auf etwas zu verzichten! Hoch oder Querformat sind problemlos mit…
There is a new version of this tool. Get it here ! This tool enables you to easily bypass almost any shopping cart lock. No need to carry around those tokens you keep losing or hopelessly look around for a trolley shed which still has a…
(Français plus bas) Quick labeling system for your plants using a number and a notepad (not included). Quickly identify any plant with a number that you copy into a notepad or spreadsheet with the name of your precious. You can use…
This is a universal cap, it will fit many rim, in this case a set of 22" rims. Dimensions rim: 22" Center hole 83.5mm (3 5/16") Dimensions cap: Outer diameter 86.5 mm (3 3/8 ") Inner diameter 82.2 mm (3 1/4") Height 5 mm (3/16") If…
IKEA Handtuchhalter mit 2cm Basis - beim Mutterkonzern nicht mehr lieferbar. Im Silber dem Original sehr ähnlich. IKEA towel rail with 2cm base - no longer available from the parent company. Very similar to the original in silver.
UofH UH University of Houston logo with or without captured magnets. When slicing the captured magnet file be sure to set the color change just before the cavities are covered. It will be a snug fit with a 2mm magnet. Be sure to check the…
This universal holder can be mounted to a wall for easy and convenient storage. Print without the use of supports or post-processing. Mounted with #6×1-¼" Dry-Wall Screws.
Universal Trichter mit einer Einfüllöffnung von 60mm
This bracket is most similar to these products (adding multiple links in case one or more go dead in the future): LEVOLOR Trim+Go 2-Piece Universal Brackets Plastic Hold Down Bracket for 2" Wood and Faux Wood Blinds Cutelec 16pcs Hold…
Another variation of t.bone Ovid/DPA microphone holder intended for universal use. Needs one of Parkside clamp set 35x33mm , one M4x25mm screw as a replacement for original one and one M4 nut.
German Die Citroën C4 Modelle ab 2020 enthalten eine Tablet-Halterung . Mit dieser Halterung können aber nur folgende Tablets genutzt werden: Amazon Fire 7"-Tablet, Vexia E1, Vexia E2 Plus, Danew 1013QC, Apple iPad 7th Mit dieser…
🧩 Bag Clip – Universal Clamp Fastener This clip is a simple and effective way to securely close open food packages. Perfect for chips, coffee, flour, rice, pet food, and other products stored in plastic bags. Designed as a universal…
Display your University of Illinois Orange and Blue spirit with a two-color coaster for your beverage of choice! Print Details Material: PLA Layer Height: 0.20 mm Infill: 15% Supports: None Brim: None Color change at 3.6 mm → Layer 18 for…
I've designed this “formula inspired” race wheel to fit the larger (70mm diameter) screw pattern on the Fanatec CSL Universal Hub V2, while wrapping around the buttons to provide a comfortable, but customizable steering experience. Neat…
IT Chiusura per sacchetti Puoi stamparla in scala 150% per avere un chiudi sacchetti di 100mm, o in scala 75% per averne uno di circa 50mm EN Bag Clip 70mm You can print in scale ratio of 150% to get a 100mm model, even at 75% to get a…
Drawer Organisers Universal/IKEA ALEX
Parameters: The adapter is intended to be used with items that have a relatively flat backside where the adapter can be glued on. However the file can be adjusted to match the glueing area with thus of the item that needs to be mounted.…
Spool Holder, Nut, and Cap were printed .15mm layer height. Spool Holder and the Arm were printed with support on build plate only. All other parts were printed with .2mm layer height. Be careful when snapping arms onto the frame as PLA…
This model is designed to display your Cd cases and show what is currently playing. also this model has a ergonomic Design with most the corners rounded. !!this model is not the final faze and i may make a better one later in the future!!…
This is a simple and clean universal phone stand with 2 different viewing angles for smartphones with an fingerprint reader at the bottom. Fit's for example the IPhone SE. This is a remix of this original model:…
Com esse suporte você pode fixar os controles na parede ou em móveis. Fácil de imprimir e usar. Use Super Glue (Super Bonder, Araldite ou outra de sua preferência).
If you have Super Famicom games and using the Universal Game Cases, you will notice that they are not snug in the holders. I made this spacer that snaps into the groove at the top to keep the carts in place. The gcode provided will print…
support que j'ai fixe sur une table ikea
Filament clip works on 2 kg Colorfabb and 3DJake spools and probably more.
I designed this to holster my Universal Circ 18v-53 Circular Saw. The model as a guide in the slot to keep the unit in place. The French cleat version also has a little storage space on top, and an optional screw hole to keep the unit in…
Ender 3, CR10, Sunlu S8 and many more printers have 2040 or 4040 extrusion bars on which the z-axis stepper motors are attached. This univeral mount does: Allow you to align the distance beweetn the stepper motor and the z-axis (common…
Universal stand allows to hold hand equipment like hot air rigid at place. Design allows for flexible position regulation. You will need: 9x M3 inserts (external diameter 4mm, I've used 7mm depth, shorter should be fine) 2x 6mm linear…
These are universally useful game pieces for table top RPGs or board games. They have an identifiable “front” and “back” for games where indicating direction matters. Pieces can be scaled up or down in the slicer to match any board grid…
This sensor mount is designed to connect most Sparkfun Qwiic enbaled sensors/breakout boards to the Experiential Robotics Platform (XRP) Kit by clipping on the sides and connecting to an open Qwiic port. The model is designed to be 3d…
Welcome, you MMU3 or ERCF users. I was kind of fed up with the spools standing around my Core One with MMU3 (former MK4S) so I installed 2 IKEA Skadis boards behind the printer to mount the spools. However, the Prusa buffer used a lot of…
Unfortunately my saddle bag hangs so low that it covers my rear light when mountet to the seatpost. So i modified the Garmin Varia Mount by "ad hoc" and modified it to fit a rear light. I recommend printing it from PETG. But if you leave…
Optional kann eine Feder verbaut werden um die PCB vor zu spannen. In meinem Fall aber nicht nötig, da die Toleranzen beim Modell ziemlich eng gewählt sind. Daher ist von Haus aus etwas Vorspannung vorhanden.
Overview Most city bikes have the ability to have a rack in the back of the bike. These tend to be very narrow and it is common that people strap on crates or bags to make these racks usable. Almost universally these are difficult to…
A collection of Desktop Holders for my previously published Universal Key Cover ( https://www.printables.com/model/613681-universal-key-cover ). Includes holders for 1, 2, 3, or 4 keys . These holders use inserts to allow color-coding to…
Assembly Video Story Hello there! I couldn’t find the perfect spool holder for my massive 5 kg Sunlu ABS spool, so I designed my own: adjustable, portable, and lightweight This spool holder was made to use spare bearings from my Voron…
I needed something to raise the feet of my hi-fi system. Thanks to the scaling and the measuring tool in the slicer, the feet can be used universally for different heights and foot diameters. The model has a ridge to sit securely under…