330 models
Combine and rearrange single- or multiple-contact Dupont connectors into a same-pitch bridge. Now with multiple row support! The assemblies can be a bit tight, but still much easier to modify than re-populating a dedicated housing. If…
A free kisses coupon inspired by Šimino 's model on printables Perfect for a gift for a significant other for valentines or any other occasion ;) Designed to be printed in multicolor without AMS, MMU, or similar When printing with 0.16…
This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components…
I like my jumper cables to have a tight fit, so i adjusted the lenghts and turned it into a single print object. The Skadis hooks can be pushed into the dovetail connection, but be carefull when inserting them, because it is a very tight…
The coupon has been remade! I made it slightly bigger, so the letters are 2 lines thick and 2 layers tall. There should be no more problems with printing this. Also, I added the Inventor project file if you want to edit. Simple coupon you…
NOTE: Do not print with supports. The model is designed to print without the need for supports Print settings (example) Rafts: No Supports: No Layer height: 0.2 mm Infill: 100 % Thank you @SpiderGod_2164882 & @Chris_Walnut_3378485 for the…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
NOTE: Do not print with supports Print settings (example) Rafts: No Supports: No Layer height: 0.2 mm Infill: 100 %
This is dupont connector lock for 1-6 pins . There are variants for 12 and 14mm dupont connector. Initially I used PLA, but the connector is fragile and propably wont withstand reusing. PETG is more suitable , because it is more flexible…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store NOTE: An issue has been identified with the…
Noticed there was a lack of Halo skull files around, so I decided to make one and share it. I'll be adding campaign symbol cut-outs upon request. Thanks to the Halo Archive for extracting and providing the model this skull was based off.…
The Dupont Wire Organizer System was created to assist fellow Arduino, raspberry pie, robotics and rc enthusiasts stay better organized. My cables were always tossed into bins and they were a pain to take out, so i created these bins so…
I wanted a way to keep my DuPont wires together and organized but wasn't a big fan of the big clunky comb-style organizers. So I made my own! This organizer can hold about 20 to 22 wires at a time. The wires I have are about 195mm long…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
This is Coupon for a free 3D Print Inspired by Free 3D Print coupon by Ocelotzlasu It is slightly bigger and thicker and thought has a quality feel to it Settings recommended and tested: PLA 0.4mm Nozzle 0.2mm Layer height Arachne Wall…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Printable 40 pin connector for RaspberryPi. You just insert separate cables (goldpin connectors) inside, put locking bar in and voila. You made yourself a working 40 pin connector and got rid of single plug cables. Never connect to wrong…
A slightly completed version and slightly corrected dimensions. (Remix from https://www.thingiverse.com/thing:5167475) This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Use only with real…
Dupont Cable Management. The fins need to be separated after printing. If you optimize this design please tag me. I would love to see improvements.
This is a simple little game I made for my toddler, taking inspiration from the game published by HABA. The game comes with a dice that tells you what to do on your turn (stack one or two animals, give one to another player etc), but it…
Remix of my Free 3D print coupon. Add text and print with filament change or just print and write something with a marker. Enjoy!
A simple remix of NERDCORNER 's Dupont cable connector, this now has a male and a female end, allowing you to use two Dupont connectors similar to a micro JST connector or other small electrical connector. The tab and recess arrangement…
I was needing a battery holder, and due to my lack of patience to wait 2 days for the order to arrive, it occurred to me to make a very simple model of battery holder that can be used directly with DuPont cables. The model has two small…
This is for those tiny crimp on dupont connectors that fit inside the plugs that plug into the RAMPS board. Tolerances on this are TIGHT! don't feel bad if you can't print a working one. This isn't going to crush the connector tight but…
Update 2023/12/01: Added a step file with the two portions of the coupon separated out as well as a DXF of the sketch to aid with customization. You've spent more hours than you care to think about routing endless items into the Awesome…
2025 - Use improvded remix https://www.printables.com/model/1185210-gridfinity-dupont-jumper-wire-holder Gridfinity - 6 Length, 1 Width, 3u High. For 200mm DuPoint wires. Requires four 6x2mm to hold the bridges in place.
All sizes of wire holders are compatible with each other Print instructions - wire holder Choose between 100, 150, and 200 mm long Supports everywhere 0.4 nozzle 0.2 layer height 10% infill, any infill pattern is fine Print instructions -…
3d printed Connector for jumper wire (Dupont 12mm) as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
USB adapter to Dupont "female" version. Be careful to insert the Dupont plugs in the right direction as shown on the pictures. This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Printing is…
I printed with the open side up. This is a simplified version based on the REV part .
When prototyping things, I like to use the cables with dupont connectors to join up Arduinos and other bits and pieces. I made these to hold 4 to 7 dupont connectors together in a little bundle. You'll need a well dialled in printer to…
14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Fully customisable Gridfinity trays to store your (Dupont) cables. I have been using urish 's Dupont Cable Organizer Customizable for many years now and they are an excellent way to store my breadboard cables. Now, I am switching to…
Designed and printed as a gift to my mom. Inspired by the many roundabout in Jeddah city, Saudi Arabia. Specifically, these following two: - The Verse Boat, by the Spanish architect Julio Lafuente:…
Like my mini crimper but takes advantage of the way 3D printers print in layers to make a much stronger crimper. This should help you crimp those small Dupont crimps so common in our hobby. The Guillotine style allows you to use one hand…
I needed a solution to store my dupont wires, so I quickly modeled these as a solution to my problem. They have served me well! Each holder requires 2 combs to be printed, which are connected with M5 threaded rods cut to length. The…
Realy usefull connector to have a clean way to connect 4 pin dupont/jumper cables. created by Nerd Corner
Parametric Dupont Cable Comb This comb holds Dupont wires in neat, parallel lines so your cable runs look clean and are easier to trace and debug. Designed in Autodesk Fusion and fully parametric. There is one single row version and one…
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
Some update from the original. You have 2 versions : one with print all in one but the combs/brush is quite weak one in few part with a combs/brush to mount with strong. (You can reduce the size to 99% to be easier to mount on the base)…
Cinema Coupon as Birthday, Christmas,… Gift. In German Language ("Kino Gutschein")
Printed envelope (90mm x 60mm) to put your self made gift coupons. Use PrusaSlicer to add your customized message.
Nice teasing gift for your partner. Make it 2 coloured at height 2.1 mm.
I've already made free kisses coupon but this one is improved: printable with 0.4mm nozzle half weight new font
Download Bane villain Batman DC Comics fanart STl 3d printing by CG Pyro [Thundercats collection 30 characters and 40 busts] We are celebrating, we have reached 30 characters and 40 busts in the Thundercats collection. Hello friends, I…
Hello, just a remix of Connector housing Dupont 4Pin made by NerdCorner user (thanks for the great job) https://www.thingiverse.com/thing:5233256 ; i remix it in order to my needs, means in my opinion a little bit strong and easy to…
I tried several JST adapter models for connecting BLTouch sensor to an Ender 3v2 board. This model prints easy and works great. I believe you could terminate this “properly” but I simply used super glue: >Remove plastic ends from dupont…
Simple USB to Dupont adapter with positive indicator.
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
a coupon like a cinema or arcade ticket, including section to “tear” off. change the text, add SVGs (i recommend https://pictogrammers.com/library/mdi/) or change the whole ticket (FreeCad file is included). i modelled the base in…
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
Remixed - The model has two small notches on each side, large enough for the DuPont connector to be firmly inserted between each battery pole and the model. The cable may be a little tight and require a little force to insert, but this…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Connector for dupont cables to rgb led strip (plug&play style) for all those who do not want to solder or do not know :), super easy to print, only use 1g
Dupont - Jumper stack for typical 2.54mm type. Can easily install. No need to support. Also has orientation indicator.
Easy to print, no support required. A quick rub between the fingers with some folded 120 grit sandpaper is all that is required. you can choose from plain ends or those with mounting holes preformed. The stand requires a length of 10 mm…
Gift card with extra space to insert money. Simple as that. Print instructions 0,2mm layer height, 15%infill Top, bottom infill hilbert curve (main photo as an example)
This is a hinged cover for interconnecting Dupont connectors (4-pin). It helps prevent the connector from coming off. You can open and close this cover by the hinge, and locking the cover in the opposite part. Note You can print this…
This is a housing for male inline 2-row Dupont connectors (aka 0.1" / 2.54mm pin headers). It is intended to hold and protect the male side and provide keying to avoid connection in the flipped orientation. There are 2 parts; the housing…
this fits an 8 pin dupont connector. was going to be used for a connection on my printer but ended up not working.
Resized to fit Elegoo Dupont cables.
Easy way to transform your Dupont cables for JST XH 2.54mm sockets. Print in PLA or PETG. No support needed. Freecad file is included.
A simple holder for 2.54mm dupont style connectors. Connector dimensions 2.54×2.54×12mm. If it's too tight, and you are using Cura, try setting horizontal expansion to -0.05mm. The walls thickness (0.8mm) is optimized for 0.4 nozzle.…
This little gadget is small, simple but powerful. I made this one because I needed customized display cables for my projects, which I usually make myself using Dupont connectors. Those connectors come with the benefit that they're pretty…
Simple safety lock for 2.54mm Dupont connectors, typically found in servos or FRC CAN bus. Included STL for 1x3 and 1x4 connectors, and SCAD file for customization. The model is designed with 0.4mm nozzle and 0.2mm layer in mind. It can…
To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…
I personally have it at 101 mm/4 in long axis, 51.5 mm/2 ish in wide and 3.6 mm/.14 in tall
3d printed Connector for jumper wire 12mm Dupont as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…
A Gift Box for Coupon for free 3D Print and Gutschein 3D Druck Settings: PLA 0.4mm Nozzle 0.2mm Layer height Arachne Wall generator 3 Wall loops Rectilinear Infill Versions: with gift bow Plain - without gift bow
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Resizeable Jumper Wire Holder, flat heavy base for work benches. ( Not 100% sure the modifier will work outside of bambu/orca slicer )
dupont contact holder for generic crimp tool. I printed with 0.4nozzle, 0.2 layer h. the screw will need to come from the other side, but it still works and makes crimping quick and easy Ideally the pin slot should be pretty tight. if…
I needed a 4 pin connector to make a WLED strip connection and designed one from scratch using Dupont terminals.
Credit card size voucher to hairdressing saloon. perforated for easier breaking. Just give it to customers as a coupon and break it after they use it. Tip: to make your own business card, just cut off the top part and add your own text…
DuPont wires commonly used in Arduino\Raspberry Pis now have a group connector. This is a 24 pin wire block that can be plugged in or out, retaining the order of the wires. Wires can be reclaimed and used for other projects simply by…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a remix of https://www.thingiverse.com/make:998505
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Use this in conjunction with my spreadsheet that performs polynomial regression on the measured features, and has a calculator that you can input your desired feature measurement and it will tell you what measurement to model the feature…
Connector housing, Dupont 2Pin Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/f3ktpdrg2DT-dupont-crimping-tool-multiboard-holder Print instructions…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ https://nerd-corner.com/dupont-connector-v1-1/
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Designed and printed in PETG, but it is intentionally a tight fit so you may have to scale it up a bit for ABS. I am not really good with soldering, but fortunately plenty of vendors offer the Raspberry Pi Pico with pre-soldered and even…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I like the changes Funkenjaeger made to the gridfinity DuPont jumper wire holder, but I also like the Gridfinity Ultra Light Bins by HuMa. This combines both.
Connector housing Dupont 4Pin Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Increased height of characters and icons for easier painting if one dont want to change filament or dont have multi material capable 3D printer. As always thanks for the original creator for this model.
This was inspired by Zack Freedman's Gridfinity project. My take on a Dupont wire holder for Gridfinity. The slots are tapered to hold wires better. I created using Onshape . Added step files for easy changes.
Descripción Diseño de Hernández y Fernández de Tintín a 4 colores impreso con AMS “boca abajo” con lámina PEI texturizada. -------------- Otros diseños: Tintín y Milú: https://www.printables.com/es/model/647590-tintin-y-milu Capitán…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
I needed a way to take 4 individual Dupont connectors and consolidate them into a single 4-pin connector. This little piece does the trick. Hope it helps you as well! I included two sizes so use whichever one best meets your needs. STEP…
Modifications for usability, see differences listed below
3d printed Connector for jumper wire (12mm Dupont) as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…
Molykote compound and other types of greases sometimes come in tubes without additional nozzles for finer dispensing. It is best printed with PP filament and a .25 nozzle. The model has a brim under which Scotch tape should be put. The…
Update Feb 17 2025 Moved the original files with a 0.1mm tolerance to their own folder Uploaded new files with a 0.2mm tolerance Dupont connectors are 2.54mm Openings are 2.74mm Added Configurations 1x3 with filled-in center pin (useful…
Coupon with heart and message in 10 variations. You can join with a bow and use also as a decoration for gift or flower bouquet. Printing from PLA (three colors), without supports, layer height 0.2 mm.
