Search results: v06

Sort order

Counting matching models…

P
PrintablesCoffeePrintDE

Honeycomb Wall SV06

This fits a 220x220 bed. Made it for my sovol sv06 but will work on any printer with this bed size. The Gcode is for a 0.6mm Nozzle, printing at 235 Nozzle Temp and 75 Bed Temp. Using Arachne this would put spots all over the bed in the…

Print approx. €3.84–€4.70 excl. taxPreliminary estimate for one variant

Downloads
5,802
Likes
674
Rating
5
P
PrintablesTJL

Updated Generic Camera Mount for SV06 & SV06+

This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
441
Likes
75
Rating
5
P
PrintablesTascanis

V-Slot Covers for Sovol SV06

Tested different V-slot covers available on this site, as you can see on the makes on my profile, this was the best fitting cover, has a very good press fit but is still easily removable. Available you'll find a file containing every…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant

Downloads
319
Likes
41
Rating
4.75
P
PrintablesJoe W

Ender 3 Tool Holder - Expanded for Sovol SV06+

My Sovol came with almost the same exact tool kit as the Ender this holder was designed for. It also came with tweezers, a spatula, two nozzle cleanout wires of differing diameter, an additional open end wrench, and a 90 deg 6mm wrench. I…

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
3
Rating
0
P
PrintablesChristian Vick

CV's OrcaSlicer Presets V1.5.5 for SV07/Plus & klipperized SV06/Plus

Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…

Downloads
7,238
Likes
455
Rating
4.81
P
Printablesrogerquin

Cable Chain ( SPINE ) for SOVOL SV06 3d printer extruder cable

This cable chain ( SPINE ) supports the extruder ribbon cable on the Sovol SV06 3d printer and stops it from sagging on taller prints. There are three special pieces for the ends of the spine. Refer to the pictures for correct placement,…

Downloads
7,060
Likes
1,434
Rating
4.86
P
Printablesrogerquin

Heatbed Cable Support for SOVOL SV06 / SV06+ 3d printer

This is version 2 of my original SV06/SV06+ heatbed cable support design. This variation is a one-piece cable support and it's super easy to install. No tools are needed, and you do not have to remove any parts. Once mounted, insert the…

Downloads
5,591
Likes
567
Rating
4.94

The Nautilus - Sovol SV06 Fan Duct 5015 Blower Fan V4

Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…

Downloads
3,737
Likes
378
Rating
4.9
P
Printablesbassamanator

Sovol SV06/Plus/ACE Extrusion Seal

SVO6 You need 2 x 173.5mm in length each to fill each groove (a ~1mm gap will remain). Scale the length if you need to. SV06 Plus I'm told by user @ThomasAlbrecht that to cover both extrusions fully, you need 4 x 223mm. SV06 Plus ACE I'm…

Downloads
3,704
Likes
448
Rating
4.82
P
Printablesbraga3dprint

Sovol SV06 Strain Relief

If you own a Sovol SV06 3D printer, you know how important it is to keep the bed cables secure and protected. That's where the SV06 strain relief comes in - with its straight and lifted versions, it helps to prevent the cable from rubbing…

Downloads
3,222
Likes
300
Rating
4.91
P
Printablesmak77

MAK PrusaSlicer Preset for Sovol SV06 / SV06 Plus

PrusaSlicer profiles made specifically for Sovol SV06 Plus (SV06+) 3D printer, to make the most of its size, speed and accuracy. Version 1.10 update: profile for SV06 (non-Plus) also included - based on Prusa MK3. The profiles are based…

Downloads
3,009
Likes
175
Rating
5

Sovol SV06 / Plus Extruder Colling Fan 5015

Printable without supports. Designed for GDSTIME GDB5015 24V. Unobstructed homing. Complete replacement for stock extruder cooling. V2: lighter design. Fixed cracking issue at screw hole. Requiered Hardware: 1x M4*20 1x micro JST plug…

Downloads
2,566
Likes
336
Rating
4.82
P
Printables3DPrintDemon

SV06 PLUS Vortex V2 Adjustable Cooling & LED System

…Please be sure to hit like & post a make, I'd love to see your prints! Here's the SV06 PLUS Vortex V2 system with adjustable height for use with either the Sovol stock nozzles or regular Volcano nozzles. Also this attachment method…

Downloads
2,479
Likes
409
Rating
5
P
Printablesrogerquin

LCD Display Back Cover for SOVOL SV06 3d printer

This is a very easy-to-print, easy-to-install SNAP-ON back cover for the SOVOL SV06 3d printer. To install, simply disconnect the ribbon cable from the LCD controller board, snap the cover in place, re-connect the ribbon cable, and you're…

Downloads
2,435
Likes
267
Rating
4.96
P
PrintablesSavageLau

SV06 Tool holder

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Downloads
2,320
Likes
290
Rating
4.87
P
Printablesbulbasaur0

Sovol SV06 Plus Heat Bed Cable Support Bundle for tight spaces (now V2!)

Update! -- November 29, 2023 I have recreated my remixed frame strain relief support model from rogerquin's original model using OpenSCAD ! By default, the recreated frame support is the same as before. However, the OpenSCAD model…

Downloads
2,178
Likes
238
Rating
4.94
P
Printablesjb

5015 adapter for Sovol SV06 extruder

UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…

Downloads
1,995
Likes
158
Rating
4.92

SV06 5015 part cooling duct

V5 Duct added, has better aimed cooling but i have not tested yet Rear mounted 5015 parts cooling duct for Sovol SV06 V3 released, cleaned internal geometry, made the mounts work better and gave the duct better clearance 2 M3x20 bolts and…

Downloads
1,994
Likes
280
Rating
4.71
P
Printablesbraga3dprint

Sovol SV06 / SV06 Plus Extruder Visualizer / Motor Knob

Keep an eye on your Sovol SV06 extruder movements with this extruder visualizer/motor knob that adds a touch of style and personalization to your printer. With the extruder movements on the SV06 and SV06 Plus often difficult to see, this…

Downloads
1,963
Likes
325
Rating
4.96
P
PrintablesSpb2005

Sovol SV06 bed alliner

Helps you to put on your bed correctly

Downloads
1,945
Likes
267
Rating
5
P
PrintablesAllTheHobbies

Sovol SV06 Tool Storage

Wanted to make a tool storage rack for the SV06 that match the style of the rest of the printer. Has a spot for all the tools that I received with the printer as well as 5 nozzles. Its one piece that printed on the top face. No supports…

Downloads
1,799
Likes
207
Rating
4.52
P
PrintablesAllTheHobbies

Sovol SV06 Filament Guide

Created a filament guide that better matches the design of the Sovol SV06. I will make a better print when I have the right colored filament.

Downloads
1,755
Likes
187
Rating
4.88
P
PrintablesStatick

SV06 5015 Fan Duct Rounded

This is just a remix of https://www.printables.com/model/361794-sv06-5015-part-cooling-duct. I rounded the corners which could potentially give it better airflow. I saw someone request it in the original comments and figured I'd take a…

Downloads
1,746
Likes
196
Rating
4.93
P
PrintablesSavageLau

SV06 Z Axis leveling tool (Align)

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Downloads
1,737
Likes
162
Rating
4.91
P
Printablesjoescalon

SV06 Plus Profiles and Build Plate

Update 8/27: Adding Orcaslicer klipper speed profiles. Adding Orcaslicer printer profile and slicing profiles to this for max speed benchy (25:52 benchy) without sacrificing quality, and a general profile for normal detailed prints that I…

Downloads
1,731
Likes
88
Rating
5
P
PrintablesSavageLau

SV06 Plus 5015 Fan duct v4.0 | Hurricane updated 7/06/23

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Downloads
1,714
Likes
201
Rating
5
P
Printablesrogerquin

GT2 Belt Mounted Y-Stop for SOVOL SV06 3d printer

This small upgrade solves the problem of the torque effect on the linear block bearing and the quick shifting of the heatbed when homing the Y-axis. I didn't like the idea of the linear block bearing under the bed being used as a stop for…

Downloads
1,678
Likes
234
Rating
5
P
Printablesbassamanator

SV06/SV07/Plus Profiles SuperSlicer PrusaSlicer

🚨 Latest version will always be found on the OSS Klipper Configuration repo. These config bundles can be imported into SS and PS. Printers SV06/Plus SV07/Plus Features Printer profiles. The best print settings in the universe (yes, even…

Downloads
1,677
Likes
83
Rating
0
P
Printablesbassamanator

Sovol SV06/Plus Frame Mounting Solution 2040 Extrusions

Please post your makes 😁 Description Easily mount and unmount things off of your printer. Should work with any printer that uses 2040 V-slot aluminum extrusion. I was told that it won't work well on T-slot extrusions. Instructions…

Downloads
1,642
Likes
212
Rating
4.91
P
Printablesitsrouteburn

Sovol SV06 Plus Print Head Cable Support

A support for the Sovol SV06 Plus cable which runs from the control board box to the print head. On my unit the metal cable support did not extend down in to the control board box, so the support was not firmly guided upwards away from…

Downloads
1,500
Likes
151
Rating
4.92
P
Printablesrogerquin

Cable Strain Relief for SOVOL SV06 3d printer

A simple heat bed cable strain relief for the SOVOL SV06 3d printer. The 3D-printed piece fits around the cable and inside the existing cable cover. use a zip-tie to clamp the cable in place. Make sure to put the tie head on top so it…

Downloads
1,475
Likes
173
Rating
4.89
P
PrintablesPleaseHelp

SV06 Bed Leveling Test

A quick test for adjusting your Z-Probe Offset while printing with the SV06, it draws the skirt right next to the purge line, check this in your .gcode file with your slicer beforehand. You can adjust your Z-Probe Offset while printing…

Downloads
1,441
Likes
65
Rating
4.83
P
PrintablesJapple

Sovol SV06 PSU Fan Silencer

If you've ever been in the same room as a Sovol SV06, you'll know that the stock PSU's fan is one of the noisiest parts on the machine. With this simple addition, you can make your printer much more pleasant to be around. It significantly…

Downloads
1,437
Likes
218
Rating
4.68
P
Printablesrogerquin

Raised Cable Strain Relief for SOVOL SV06 3d printer

This heat bed cable strain relief raises the cable up to a 30° angle coming out from the heat bed and minimizes/eliminates cable contact with the rear frame cover. The most common cause of heat bed cable failure is solder joints breaking…

Downloads
1,381
Likes
166
Rating
4.91
P
PrintablesGL3D

SV06 Clip-On Bed Aligner

I printed this in Polymaker PLA, at 100% infill. I heated the ends a little bit to make it go on nicer but it works like a charm! If you will be printing with PETG or ABS, I recommend printing it in that material. I printing in PLA since…

Downloads
1,346
Likes
144
Rating
4.86
P
PrintablesAvel

Sovol SV06 5015 Blower Fan Duct

I remixed two designs into this. You will need: 4) M3x8 screws 2) M3x12 screws 1) M3x25 screw with an M3 nut (an M4x25 should also work) If you have time, check out the video. :)

Downloads
1,289
Likes
155
Rating
4.46
P
PrintablesSavageLau

SV06 5015 Fan duct

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Downloads
1,256
Likes
184
Rating
5
P
PrintablesTonyB

Silicone Tube Leveling Jig for Sovol SV06 Heatbed

This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…

Downloads
1,211
Likes
110
Rating
4.96
P
Printables3DprintMyLife

Sovol SV06 Camholder

You can easy print this out of any material. I got an enclosure so i went for PETG. I printed it with the side where the cam is mounted on, on the printplate. You need to replace the two screws! The originals are too short when using this…

Downloads
1,206
Likes
185
Rating
4.85
P
Printablesbinarypickle

SV06/Plus Camera Mount

Arm to help folks mount a camera to their SV06/Plus front frame. Arm has a hole that should accommodate a variety of bolts for camera bases. Step files included if adjustments are necessary. Haven't tested with anything heavier than a…

Downloads
1,206
Likes
142
Rating
4.86
P
Printablesub3rmario

Sovol SV06 Minimal Filament Guide

Update 2022-12-05: Added V2 which is more of a slotted opening tapered to the left and right to account for times when you print something very tall. It gives more flexibility for the filament when the print head is farther away from…

Downloads
1,188
Likes
156
Rating
4.96

Sovol SV06 PLUS Better Fan Duct

No support, better fan duct for Sovol SV06 PLUS On photos you can see difference between standard and upgraded fan duct. Also check my Sovol SV06 PLUS Cable HOLDER https://www.printables.com/model/482250-sovol-sv06-plus-cable-holder If…

Downloads
1,157
Likes
100
Rating
4.8
P
PrintablesAllTheHobbies

SV06 Extruder Cable Support

Extruder cable support for the Sovol SV06 to prevent sagging and contact with your prints. Turn off power. Remove extruder cable. Place support over the cable keeper hooks. Reattach extruder cable.

Downloads
1,110
Likes
131
Rating
4.96
P
Printablesrogerquin

Spool Holder for SOVOL SV06 3d printer

A simple spool holder for the SV06. I designed this spool holder specifically for the SV06 3D printer, but it might work on others. This spool holder mounts over the existing spool holder. To install, temporarily remove the tube from the…

Downloads
1,105
Likes
161
Rating
4.8
P
PrintablesMooshSquisher

SV06 Plus Bed Cable Strain Relief

This part replaces the one supplied by Sovol with the SV06 Plus and adds an extension off the back to provide additional support and also angles the cable up slightly to keep the cable from rubbing on the rear frame. Two zip ties are…

Downloads
1,095
Likes
108
Rating
4.88
P
Printablesrogerquin

HD Filament Guide for SOVOL SV06 3d printer

This is a very easy-to-print, very easy-to-install filament guide for the SOVOL SV06. No tools are required for installation. To install, temporarily remove the spool holder tube and slide the filament guide over the spool holder arm.…

Downloads
1,071
Likes
152
Rating
4.9
P
PrintablesJustin Vallely

Sovol SV06 Backpack

The best places I’ve found to mount a Pi on the Sovol SV06 and SV06 Plus require drilling and tapping so I came up with this “backpack” concept to clip onto the controller housing. It lightly plays into PLA’s compliance to hold firm and…

Downloads
1,015
Likes
192
Rating
4.95
P
PrintablesMartijn

SV06 Plus and SV07 plus Z Axis leveling tool

Fast Check if your Z axis is stil level with the bed on your Sovol SV06 Plus. I remixed these from the SV06 ones because after homing the SV06 Plus has a different gantry heigt. After homing the printer head and turning off the…

Downloads
996
Likes
111
Rating
5
P
Printableskiwiprint

Sovol SV06 Buildplate texture and model for PrusaSlicer/Superslicer

This is just a simple texture and model combination for your Sovol SV06 presets in SuperSlicer or Prusaslicer. All I did was adjust the z position of the stl for the bed and quickly made a texture in Affinity Designer for the texture. It…

Downloads
963
Likes
98
Rating
5
P
Printablesbassamanator

ADXL345 (standard and BTT) Mount for the Sovol SV06/Plus

UPDATE Added v2 (RECOMMENDED) Changelog Easier to tighten. Accommodates: Standard ADXL345. BTT ADXL345/S2DW (see this make ). 3 versions of the mount (see filenames for explanations). The bed spacer now plugs into the mount. BOM 4 x M3 x…

Downloads
948
Likes
120
Rating
5
P
Printables3DRibo

The Nautilus - Sovol SV06 PLUS

The Nautilus design remixed to fit Sovol SV06 Plus taller hot end. This will work with stock or volcano nozzles. The model is quite rough and ready, not as refined as the original, but works absolutely fine and printer first try. when I…

Downloads
881
Likes
113
Rating
5
P
Printableslollo99

Cable Strain Relief for SOVOL SV06 Curve

Remix of the cable relief if you have your printer next to a wall 0.2 layer or 0.15 i used PETG for better heat resistance Supports on plate only Remix of Cable Strain Relief for SOVOL SV06 3d printer da rogerquin

Downloads
836
Likes
93
Rating
4.5
P
Printablesrogerquin

Back mounted cooling fan duct for SOVOL SV06 3d printer with 4010 blower fan

***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…

Downloads
835
Likes
128
Rating
4.71
P
PrintablesOverthinker42

Sovol SV06 PLUS Better Fan Duct Remix

Improved dimensions. See Sergiienko Valentyns original for more details. If you use Polymaker PolyMide CoPA like me: Printing it all in one piece with supports is an option, but the supports are a struggle to remove as is default with…

Downloads
827
Likes
80
Rating
4.88
P
PrintablesMyTechFun

Fixing Sovol SV06 Plus bed cable problem

Sovol SV06 Plus is a great printer, but its bed heating cables are not fixed resulting a safety issue. With this solution first 20mm will be fixed. Don't forget to print it from ABS or other hi-temp material. Installation requires 10…

Downloads
819
Likes
137
Rating
4.64
P
PrintablesMaxim7745

Nozzle Z Offset Search - Sovol SV06 Version

Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…

Downloads
818
Likes
78
Rating
5
P
PrintablesSavageLau

SV06 Plus tool holder

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Downloads
813
Likes
127
Rating
4.67

The Amonite - Sovol SV06 Fan Duct Dual 5015 Blower Fan V4

Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…

Downloads
803
Likes
112
Rating
5

Sovol SV06 / Plus Bowden Tube Mount

Simple bowden tube mount for M6 bowden coupler. Requiered Hardware: 2x M3*8 countersunk 1x M6 bowden coupler

Downloads
797
Likes
134
Rating
5

Sovol SV06 Fan Duct 5015 Blower Fan V3

New versions available: Single Fan: https://www.printables.com/model/542760-the-nautilus-sovol-sv06-fan-duct-5015-blower-fan-v Dual Fan: https://www.printables.com/model/543502-the-amonite-sovol-sv06-fan-duct-dual-5015-blower-f Designed…

Downloads
789
Likes
94
Rating
5
P
Printablesvoid_foo

Smoother Cable Chain / Spine for SOVOL SV06 with scaled ball joint

This is a remix of the excellent cable chain for the Sovol SV06 made by rogerquin ( https://www.printables.com/model/447467-cable-chain-spine-for-sovol-sv06-3d-printer-extrud ). To make the chain flex smoothly, I used blender to scale…

Downloads
778
Likes
81
Rating
5
P
PrintablesPr20100

Sovol SV06 Top Z bearings

Made from scratch, just few additions to the original to make it easier to print with ASA, ABS… and with bearing of course. Added clearence for the rod hole to prevent pushing down your motor mount when tightened 2 models : Standard With…

Downloads
765
Likes
148
Rating
4.5
P
PrintablesV.PoP

Sovol SV06 Heat bed cable chain - NEW narrow+minimal version

A cable chain to keep the heat bed cable from dragging along the base of he printer. Should help with the thermistor going haywire. Notes: ORIGINAL version. Thick. Does not fit with a back mounted parts cooling fan! The shroud “parks” on…

Downloads
753
Likes
160
Rating
4.14
P
PrintablesAllTheHobbies

Sovol SV06 Bed Heater Cord Support

Relieve rubbing of the cord on the table, corner and frame. Keep cord parallel to the bed movement. Presses onto cord no fastening required.

Downloads
732
Likes
104
Rating
4.89
P
Printables3DPrintDemon

SV06 Plus Fan Duct Regular Volcano

…Please at least be sure to hit like & post a make, I'd love to see your prints! Use volcano nozzles in your sv06 plus. DONT LEAVE A BAD REVIEW BECAUSE YOU DID A BAD PRINT! Like the single reviewer here! That's just not cool. It’s…

Downloads
718
Likes
108
Rating
4
P
Printableslollo99

Sovol SV06 Bed And Texture

If you need the bed and the bed texture for your slicer here it is I took the real bed shape from the open source files of the printer and left the lower block as well for a more consistent base I made it for PrusaSlicer but should work…

Downloads
713
Likes
65
Rating
5
P
Printablesub3rmario

Sovol SV06 Z-Motor Alignment Block / Shim

These are just simple blocks you can shove behind your Z axis motors on the bottom side to true up the angle with the metal uprights. See photos for what I'm talking about. I noticed mine were greater than 90 degrees and this seems to…

Downloads
701
Likes
123
Rating
5
P
PrintablesPhantomAura

Sovol SV06 Plus Ultimate Filament Runout Sensor Mount

This bracket mounts the SV06 Plus filament runout sensor directly above the hotend, allowing it to detect runouts much closer to the extruder. The mounting hole on this bracket has been molded perfectly to accommodate the runout sensor,…

Downloads
696
Likes
101
Rating
4.8
P
PrintablesKamiNoKuma

Sovol SV06 Plus Tool Drawer

This is a drawer to store your tools with your Sovol SV06+.

Downloads
666
Likes
85
Rating
5
P
PrintablesMooshSquisher

Sovol SV06 Plus On-Printer Tool Holder

This tool organizer for the Sovol SV06 Plus is designed to snap onto the top of the vertical extrusion that the power supply is mounted to. It is a snug fit and will require a little coercing. The idea was to house all of the tools needed…

Downloads
661
Likes
85
Rating
4.67
P
Printablesjoescalon

Sovol SV06 Plus 5015 Fan duct | NAV modular duct updated

Update 9/3/2024: I don't have this printer anymore, so upon request I am posting the CAD files for this project. Fill free to continue the work with this mount/duct with attribution. Also changing to CCA. Update 6/15: Added a dual screw…

Downloads
642
Likes
86
Rating
4.33
P
Printablesbulbasaur0

Sovol SV06 Plus extruder mounted cable support

Keep your Sovol SV06 or SV06 Plus extruder cable elevated with this cable support! This model was created in OpenSCAD . The default curve angle of 60° is customizable in the OpenSCAD model. Recommended pairing This model pairs well with…

Downloads
614
Likes
56
Rating
5
P
PrintablesEclypse3D

Sovol Sv06 Voron Stealthburner mod *now includes support for inductive and eddy probe

I took the factory hotend mount model and remodeled it to accept the X gantry Voron Clockwork 2 left and right mounts. Since the SV06 has its own probe and uses sensorless homing I removed unneeded geometry for belts, probe mounts etc.…

Downloads
613
Likes
205
Rating
5
P
PrintablesSirKeldon

SOVOL SV06 Stock Dual-Wing Fan Duct

Hello all! I present to you “The Fanducstein”, a dual wing fan duct prototype based on the parts Sovol released. I just tried to maximise the air pressure over the nozzle instead of the travel it does, also, the central part has been…

Downloads
601
Likes
63
Rating
5
P
PrintablesFingWizard

SV06+ Plus 5015 Fan w/ mounting Tabs

Sv06+ Plus Vortex fan with mounting bracket. Printed with PETG 0.2mm line height, supports as needed. Hardware: M3 x 25 tapered for mounting to gantry. used tapered head for this so the hardware doesn't interfere with X-axis calibration.…

Downloads
593
Likes
93
Rating
5
P
PrintablesPhantomAura

Sovol SV06/SV06 Plus Cable Chain End Links

This is a modification of the rogerquin cable chain that allows the ends of the chain to be secured in place. This supports the extruder cable even better and keeps the entire chain from shifting. Motherboard Link: This link has been…

Downloads
593
Likes
64
Rating
5
P
Printablesbraga3dprint

Sovol SV06/SV06 plus double filament/spool holder

The dual filament holder mod for the Sovol SV06 is a great addition to anyone who regularly uses multiple filaments. The design is simple yet effective, with the only modification being a mirrored and reinforced barrel nut using the…

Downloads
566
Likes
80
Rating
4.7
P
Printablesblanchas

SV06 Plus 5015 part cooling duct bracket remix

This is a remix of the bracket to work with the SV06 Plus. This works with the original ducting as well as the remixed version https://www.printables.com/model/410475-sv06-5015-fan-duct-rounded

Downloads
547
Likes
70
Rating
5
P
PrintablesJambalaya

SV06 Fan Duct

Adapts 4020 blower fan to Sovol SV06 3D printer. Improves part cooling. Print with 0.8mm wall thickness Print with heat PETG or other heat resistant material No supports are needed Required hardware 2x M3*8 2x M3*14 3x M3*18 Recommended…

Downloads
542
Likes
85
Rating
5
P
Printablesmak77

MAK Sovol SV06+ Sensor Arm Mod

In some cases the genuine Sovol filament run-out sensor causes too much friction, leading to extrusion problems. One of the issues is the sensor itself, which can be addressed by using the following sensor casing mod:…

Downloads
531
Likes
82
Rating
4.94
P
Printablesbraga3dprint

Sovol SV06 Strain Relief

Outdated New model: https://www.printables.com/model/452682-sovol-sv06-strain-relief This strain relief model for the SOVOL SV06 was remixed to address the issue of the cable not being securely held in place. With the latest version, v5,…

Downloads
517
Likes
65
Rating
5
P
Printables3DPrintDemon

BTT TFT50 Pi V2.1 DSI Touchscreen Klipper Octoprint Sovol Mount SV06, SV06 Plus & SV01 PRO

…Please be sure to hit like & post a make, I'd love to see your prints! UPDATE: Model for BTT TFT50 PI SCREEN V2.1 ADDED!! LATEST VERSION!! IMPORTANT NOTE!!! The newer V2.1 screens have 3 buttons instead of a switch & brightness wheel.…

Downloads
511
Likes
134
Rating
4.75

Sovol SV06 4010 Fan Duct

After realizing my factory fan duct was broken I quickly drafted this replacement fan duct up to get back to printing. I am currently testing this in PETG (ABS recommended) and will be providing a couple of improvements soon. I will…

Downloads
510
Likes
74
Rating
4.75
P
PrintablesLars

Sovol SV06 (Plus!) LED Strip Mount

I have remixed Gary Fliegel's light mount to fit a common 24v LED strip. Update 06/04/2023: I have added an 8cm wider version for the SV06 Plus :) Information Dimensions of the LED strip: 8mm width, 2mm height, 50mm per section and it…

Downloads
503
Likes
97
Rating
4.83
P
PrintablesSpb2005

Sovol SV06 4020 cooling fan (heatcreep fix)

A Remix. I didnt get the Step files, so i had to edit it in Tinkercad. You will need 3 X M3 X 15mm Screws. I recomment to use Screws with small heads, so they wont interfere with the gantry. If you dont have any, you have to remove the…

Downloads
503
Likes
91
Rating
5
P
PrintablesVasco Almeida

Sovol SV06 Plus camera holder

Need to replace the original screws with M4-20

Downloads
503
Likes
70
Rating
5
P
Printablesyetzt

4020 Blower Fan Adapter for Sovol SV06 and SV06 plus

An adapter to replace the 4010 extruder cooling fan with a 4020 blower fan. Has good clearance with the gantry, no change in build area. Mounts to the stock extruder with stock screws, 4020 fan mounts to the bracket with 3× M3×18 bolts.…

Downloads
485
Likes
83
Rating
5
P
Printablesbinominem

Screen Knob for Sovol SV06

Screen Knob for Sovol SV06

Downloads
481
Likes
47
Rating
5
P
Printablesfryc88

Sovol SV06 SV06 Plus accelerometer mount ADXL345 PIS portable input shaper on RPI2040

Hi, I made brackets to test my Sovol SV06 Plus with Portable Input Shaper from FYSETC. This specific one is slightly easier to use - requires only USB-C and flashing firmware to it. There were no brackets available for SV06, so I decided…

Downloads
481
Likes
67
Rating
5
P
PrintablesCrosslink

Fanconnector Remix for The Nautilus - Sovol SV06 Fan Duct 5015 Blower Fan V4

I remixed the fanconnector as it was too small for my WinSinn 5015 fan and my part cracked upon insertion of the fan.

Downloads
476
Likes
28
Rating
0
P
PrintablesShinanai

Sovol SV06 "-Ikea Lack table - Prusa Research" mod

3 side panels: 440mm x 460mm 2 door panels: 220mm x 460mm

Downloads
465
Likes
131
Rating
5
P
PrintablesKevin

sovol sv06 plus 5015 fan duct

There are two types of mounts. One uses rubber cement/double sided tape to hold it to the back and the other uses M3x25 countersunk screws to be held in place. This is to clear the back which has about 3mm of clearance

Downloads
465
Likes
63
Rating
4
P
PrintablesObliviousOrange

Sovol SV06 Enhanced Tool Holder

A toolbox for the tools that came with the SV06 that mounts to the frame of the printer, resting on top of the power supply. Comes with a few new additions: A better slot for holding the cutters A spot that can hold…

Downloads
462
Likes
52
Rating
4.67
P
Printablesbulbasaur0

Sovol SV06 (Plus) forward-facing dual spool holder V2

Use this double spool holder to place two forward facing filament spools on your Sovol SV06 or SV06 Plus! Using the original Sovol SV06 filament barrel nut , I created a longer double-ended nut combined with a new base to create this dual…

Downloads
461
Likes
62
Rating
5
P
PrintablesPhantomAura

Sovol SV06 Plus Filament Guide

This is a remix of the rogerquin SV06 filament guide to fit the SV06 Plus. One arm has been extended and has an added slot to accommodate the SV06 Plus filament runout sensor mount. Simply remove the spool and runout sensor arm and slide…

Downloads
460
Likes
52
Rating
5
P
Printables3DPrintDemon

Fysetc Portable Input Shaper ADXL345 USB C Accelerometer Mount Bed Y Axis CAPTIVE Mount Clamp! No bed damage!! SV06 Plus

…Please be sure to hit like & post a make, I'd love to see your prints! Here's my over engineered Y Axis captive mount for the Fysetc Portable Input Shaper ADXL345 USB C Accelerometer bed mount. It's designed for ANY PRINTER with a PEI…

Downloads
456
Likes
66
Rating
5
P
PrintablesShinanai

Sovol SV06 PSU mount bracket

Intended screw size: 3.5 x 25mm. You'll need an XT60 extension cord (XT60 and XT60H are virtually the same, pick whatever suits you best in terms of length).

Downloads
455
Likes
86
Rating
4.5
P
PrintablesCoCo Dimension

Z-axis Mod for Sovol SV06

Update: The step files are here. Feel free to modify them to suit your need. This mod is installed in place of factor z-coupler. It gives wiggle room to the factory z-coupler. A slightly bent lead screw can release circular motion inside…

Downloads
455
Likes
82
Rating
4

Sovol SV06 Fan Duct 5015 Blower Fan

New upgraded version available on my profile: https://www.printables.com/model/483474-sovol-sv06-fan-duct-5015-blower-fan-v3 Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Glueing optional but advised…

Downloads
452
Likes
69
Rating
5
P
PrintablesThomas Albrecht

Sovol SV06/Plus power supply cover for 80mm fan

Why this? The PSU fan on the SV06/SV06 Plus is always on and pretty loud. And despite what the text on the PSU says it is not controlled by the PSU temperature. The solution is to use a quieter fan. Which is easier when the fan is bigger…

Downloads
447
Likes
93
Rating
5